MITSUBISHI HYBRID ICs M57916L HYBRID IC FOR DRIVING TRANSISTOR MODULES ● Two independent circuits are included. Isolation voltage: Viso=2500Vrms ● Each circuit can be driven by single power supply (7 ~ 9V) Dimensions in mm 21MAX. 59MAX. 1 20 2.54±0.1 8.0MAX. 2.54✕19=48.26±0.3 0.35±0.2 10.0MAX. 8.5MAX. FEATURES OUTLINE DRAWING 0.2MIN. 1.8MAX. M57916L is a Hybrid Integrated Circuit designed for driving Transistor Modules QM10XX, QM20XX, etc., in an Inverter application. This device operates as an isolation amplifier for Transistor Modules due to the electrical isolation between the input and output, and includes two independent circuits. 4.5±1.5 DESCRIPTION 3.0MAX. APPLICATION To drive Transistor Modules for Inverter applications BLOCK DIAGRAM 8 470Ω Tr1 2 INTERFACE CIRCUIT 1 OPTO-COUPLER Tr2 7 6 Tr3 5 18 12 17 Same as above 16 11 15 CIRCUIT DIAGRAM 12 2 8 18 Tr1 PC 7 17 6 16 Tr2 Tr3 11 1 5 15 Feb.1999 MITSUBISHI HYBRID ICs M57916L HYBRID IC FOR DRIVING TRANSISTOR MODULES ABSOLUTE MAXIMUM RATINGS (Ta=–20 ~ +70°C, unless otherwise noted) Symbol VCC VI IOH IOLP Viso Tj Topg Tstg Parameter Supply voltage Input voltage Output current Isolation voltage between two currents Junction temperature Operating temperature Conditions DC Between terminals ➀ and ➁ Pulse width 10µs, Freq. 2kHz, peak value Sinewave voltage 60Hz/min. Ta=25°C Storage temperature Ratings 14 –1 ~ 7 –1 Unit V V A 3 A 2500 Vrms 100 –20 ~ +70 –25 ~ +100 °C °C °C ELECTRICAL CHARACTERISTICS (Ta=25°C, VCC=8V, unless otherwise noted) Symbol Parameter IIH “H” input current IOH “H” output current “L” output peak current Internal power dissipation IOLP PD tPLH tPHL “L-H” propagation delay time “H-L” propagation delay time Test conditions VI=5V Rext=7Ω Limits Min. – – Cext=47µF – IOH=–0.5A, IOLP=1A, f=2kHz, D.F.=50% VI=0→4V, Tj=100°C VI=5→0V, Tj=100°C – – – Typ. 7 Max. – –0.5 1 1.25 – – – 5 8 10 15 Unit mA A A W µs µs Feb.1999 MITSUBISHI HYBRID ICs M57916L HYBRID IC FOR DRIVING TRANSISTOR MODULES PROPAGATION DELAY TIME VS. INPUT SIGNAL VOLTAGE (TYPICAL) 12 VCC=8V Rext=7Ω load:QM20DX f=200Hz, D.F.=1% Ta=100°C 10 8 tPHL 4 0 tPLH 3 4 5 6 INPUT SIGNAL VOLTAGE 7 PROPAGATION DELAY TIME “L-H” tPLH (µs) PROPAGATION DELAY TIME “H-L” tPHL (µs) PROPAGATION DELAY TIME “L-H” tPLH (µs) PROPAGATION DELAY TIME “H-L” tPHL (µs) PERFORMANCE CURVES VI (V) PROPAGATION DELAY TIME VS. AMBIENT TEMPERATURE (TYPICAL) 9 8 7 5 4 3 tPLH 2 1 0 40 60 80 100 “H” OUTPUT CURRENT VS. “H” LIMITING RESISTOR (TYPICAL) –1600 VCC=8V f=200Hz, D.F.=1% Rext=7Ω load:QM20DX VIN=5V 3 “H” OUTPUT CURRENT IOH (mA) (–IB1) “L” OUTPUT PEAK CURRENT IOLP (A) (IB2) 4 2 1 0 –1 –2 VCC=8V VIN=5V Ta=25°C –1200 –3 –4 REVERSE SUPPLY VOLTAGE VEE (V) INTERNAL POWER DISSIPATION PD (W) 20 AMBIENT SIGNAL TEMPERATURE Ta (°C) “L” OUTPUT PEAK CURRENT VS. REVERSE SUPPLY VOLTAGE (TYPICAL) 0 VCC=8V Rext=7Ω tPLH:VIN=0 4V tPHL:VIN=5 0V load:QM20DX f=200Hz, D.F.=1% tPHL 6 –800 –400 0 4 8 12 “H” LIMITING RESISTOR 16 20 Rext (Ω) INTERNAL POWER DISSIPATION VS. AMBIENT TEMPERATURE (MAXIMUM RATING) 4 3 2 1 0 0 25 50 70 75 100 AMBIENT TEMPERATURE Ta (°C) Feb.1999 MITSUBISHI HYBRID ICs M57916L HYBRID IC FOR DRIVING TRANSISTOR MODULES TEST CIRCUIT AND APPLICATION CIRCUIT EXAMPLE +5V M57916L 1/2 Transistor Module 1 2 5 6 7 8 Rext DRIVER TTL etc. IO 470Ω1/2W VIH INPUT SINK 7mA + Cext VCC + VIN 0 VI t –IO IOH(IB1) t 0 IOLP(IB2) Note: IOH and IOLP correspond to base forward current IB1 and base reverse current IB2 of the transistor module to be driven respectively. Feb.1999