TRIQUINT TGA1172

Advance Product Information
March 21, 2000
27 - 32 GHz 1W Power Amplifier
TGA1172
Key Features
•
0.25 um pHEMT Technology
•
18 dB Gain at 28 GHz
•
29 dBm Nominal P1dB
•
37dBm OTOI typical at 28GHz
•
Input/Output RL < -10 dB
•
Bias 6 - 7V @ 630 mA
Primary Applications
•
Point-to-Point Radio
•
Point-to-Multipoint Communications
•
Ka Band Sat-Com
Chip Dimensions 2.69 mm x 1.37 mm
Small Signal Gain
15
25
15
S21
0
-5
-5
-15
-10
-25
S11
-15
15
20
25
30
600µm
Vg3
1200µm
RF
OUT
2400µm
Vg2
Vg1
Vg3
Vd2
Vd1
-45
40
35
Vd3
Vg2
RF
IN
-35
S22
-20
10
Vd2
Vd1
5
Gain (dB)
6V, 630 mA
5
Vd3
Amplifier Topology
Frequency (GHz)
Output Third Order Intercept
Output Power at P1dB
32
Output TOI (dBm)
31
)
30
29
(
P1dB (dBm)
Return
g Loss (dB)
( )
10
6V, 630 mA
28
27
26
25
26
27
28
29
Frequency (GHz)
30
31
32
40
39
38
37
36
35
34
33
32
31
30
6V, 630 mA
26
27
28
29
30
31
32
33
Frequency (GHz)
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice
TriQuint Semiconductor Texas : Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
1
Advance Product Information
March 21, 2000
TGA1172
TGA1172 Single tone pout and IMD3 vs Pin
25
10
20
0
15
-10
10
-20
IMD3 (dBm)
Pout (dBm)
Frequency = 28GHz, 6V, 630 mA
SCL Power
IMD3
5
-30
-40
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
Pin (dBm)
TGA1172 Single tone pout and IMD3 vs Pin
25
10
20
0
15
-10
10
-20
IMD3 (dBm)
Pout (dBm)
Frequency = 31GHz, 6V, 630 mA
SCL Power
IMD3
5
-30
-40
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
Pin (dBm)
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas : Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
2
Advance Product Information
March 21, 2000
TGA1172
Vd
0.01µF
100pF
5mil
Ribbon
5mil
Ribbon
100pF
0.01µF
Vg
Chip Assembly and Bonding Diagram
GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should
be observed during handling, assembly and test.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas : Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
3
Advance Product Information
March 21, 2000
TGA1172
Assembly Process Notes
Reflow process assembly notes:
•=
•=
•=
•=
•=
AuSn (80/20) solder with limited exposure to temperatures at or above 300ΓC
alloy station or conveyor furnace with reducing atmosphere
no fluxes should be utilized
coefficient of thermal expansion matching is critical for long-term reliability
storage in dry nitrogen atmosphere
Component placement and adhesive attachment assembly notes:
•=
•=
•=
•=
•=
•=
•=
vacuum pencils and/or vacuum collets preferred method of pick up
avoidance of air bridges during placement
force impact critical during auto placement
organic attachment can be used in low-power applications
curing should be done in a convection oven; proper exhaust is a safety concern
microwave or radiant curing should not be used because of differential heating
coefficient of thermal expansion matching is critical
Interconnect process assembly notes:
•=
•=
•=
•=
•=
thermosonic ball bonding is the preferred interconnect technique
force, time, and ultrasonics are critical parameters
aluminum wire should not be used
discrete FET devices with small pad sizes should be bonded with 0.0007-inch wire
maximum stage temperature: 200ΓC
GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should
be observed during handling, assembly and test.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas : Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
4