SHE123BGH / SHE123BGH-(B) Semiconductor High Brightness LED Lamp Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type • Super luminosity Application • Traffic Signal • Massage Board Outline Dimensions unit : mm STRAIGHT TYPE STOPPER TYPE 5.0±0.2 5.0±0.2 8.6±0.2 8.6±0.2 0.8±0.2 0.8±0.2 3.5±0.5 0.5 0.5 25.0 MIN 25.0 MIN 1.0MIN 1.0MIN 2.54NOM 2.54NOM 1 2 5.8±0.2 1 2 5.8±0.2 PIN Connections 1. Anode 2. Cathode KLE-3004-000 1 SHE123BGH / SHE123BGH-(B) Absolute maximum ratings Characteristi c Symbol Ratings Unit Power Dissipation PD 160 mW Forward Current IF 40 mA IFP 65 mA Reverse Voltage VR 4 V Operating Temperature Topr -30∼80 ℃ Storage Temperature Tstg -30∼100 ℃ 1 * Peak Forward Current 260℃ for 5 seconds *2Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package ※ Recommend document -. LED is very sensitive to ESD. Electrical Characteristics Characteristic Ta=25˚C Symbol Test Condition Min Typ Max Unit Forward Voltage VF IF= 20mA 2.7 3.3 3.8 V * Luminous Intensity IV IF= 20mA 1760 3960 8910 mcd Peak Wavelength λP Δλ IR IF= 20mA - 502 - nm IF= 20mA - 30 - nm VR=4V - - 10 uA IF= 20mA - ±15 - deg 4 Spectrum Bandwidth Reverse Current 3 θ1/2 * Half Angle *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18% *4. Luminous Intensity classification S T U V 1760~2640 2640~3960 3960~5940 5940~8910 KLE-3004-000 2 SHE123BGH / SHE123BGH-(B) Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Forward Voltage VF [V] Fig. 3 IF – Ta Current IF [mA] Forward Relative Intensity [%] Current IF [mA] Fig.4 Spectrum Distribution Wavelength λ [nm] Ambient Temperature Ta [℃] Fig. 5 Radiation Diagram 100 50 0 50 100 Relative Luminous Intensity [%] KLE-3004-000 3 SHE123BGH / SHE123BGH-(B) These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KLE-3004-000 4