SBD835L ADVANCE INFORMATION 8A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features · · · · · · Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Very Low Forward Voltage Drop Surge Overload Rating to 150A Peak Plastic Material: UL Flammability Classification Rating 94V-0 DPAK E A G P H 4 1 2 3 B Mechanical Data · · · · · J M Case: DPAK Molded Plastic Terminals: Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Marking: Type Number Weight: 0.4 grams (approx.) D K C PIN 1 PIN 4 PIN 3 Note: L Dim Min Max A 6.3 6.7 B ¾ 10 C 0.3 0.8 D 2.3 Nominal E 2.1 2.5 G 0.4 0.6 H 1.2 1.6 J 5.3 5.7 K 0.5 Nominal L 1.3 1.8 M 1.0 ¾ P 5.1 5.5 All Dimensions in mm Pins 1 & 3 must be electrically connected at the printed circuit board. Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TC = 88°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage (Note 2) @ IF = 8A, Tj = 25°C @ IF = 8A, Tj = 125°C Voltage Rate of Change Peak Reverse Current at Rated DC Blocking Voltage @ TC = 25°C @ TC = 100°C Typical Junction Capacitance (Note 3) Symbol SBD835L Unit VRRM VRWM VR 35 V VR(RMS) 25 V IO 8 A IFSM 150 A VFM 0.51 0.41 V dv/dt 10,000 V/ms IRM 1.4 35 mA CJ 300 pF Typical Thermal Resistance Junction to Case (Note 1) RqJC 6 °C/W Typical Thermal Resistance Junction to Ambient RqJA 80 °C/W Tj -65 to +125 °C TSTG -65 to +150 °C Operating Temperature Range Storage Temperature Range Notes: 1. Thermal resistance: junction to case, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pad as heat sink. 2. 300ms pulse width, 2% duty cycle. 3. f = 1 MHz, VR = 5VDC. DS30202 Rev. E-1 1 of 2 SBD835L 100 IF, INSTANTANEOUS FWD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 8 6 4 2 TJ = 125ºC 10 0 100 TJ = 125ºC 1 TJ = 25ºC 0.1 0.01 0 200 0 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 120 90 60 30 0 10 100 IR, INSTANTANEOUS REVERSE CURRENT (mA) 8.3ms single Half-Sine-Wave (JEDEC Method) 1 0.2 0.3 0.4 0.5 0.6 10.0 TJ = 100ºC 1.0 0.1 0.01 0.001 TJ = 25ºC 0 5 10 15 20 25 30 35 40 VR, RATED PEAK REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Characteristics Number of Cycles at 60Hz Fig. 3 Max Non-Repetitive Surge Current DS30202 Rev. E-1 0.1 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Fwd Characteristics per Element 150 IFSM, PEAK FORWARD SURGE CURRENT (A) ADVANCE INFORMATION 10 2 of 2 SBD835L