ONSEMI MC74VHC1G05DFT1

MC74VHC1G05
Advance Information
Inverter with Open Drain
Output
The MC74VHC1G05 is an advanced high speed CMOS inverter
with open drain output fabricated with silicon gate CMOS technology.
It achieves high speed operation similar to equivalent Bipolar
Schottky TTL while maintaining CMOS low power dissipation.
The internal circuit is composed of three stages, including an open
drain output which provides the capability to set output switching
level. This allows the MC74VHC1G05 to be used to interface 5V
circuits to circuits of any voltage between VCC and 7V using an
external resistor and power supply.
The MC74VHC1G05 input structure provides protection when
voltages up to 7V are applied, regardless of the supply voltage.
•
•
•
•
•
•
http://onsemi.com
SC–88A / SOT–353
DF SUFFIX
CASE 419A
High Speed: tPD = 3.8ns (Typ) at VCC = 5V
Low Internal Power Dissipation: ICC = 2µA (Max) at TA = 25°C
Power Down Protection Provided on Inputs
Pin and Function Compatible with Other Standard Logic Families
Latchup Performance Exceeds 300mA
ESD Performance: HBM > 2000V; MM > 200V, CDM > 1500V
MARKING DIAGRAM
VFd
Pin 1
d = Date Code
PIN ASSIGNMENT
NC
1
5
VCC
OVT
IN A
GND
2
3
4
1
NC
2
IN A
3
GND
4
OUT Y
5
VCC
OUT Y
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
Figure 1. 5–Lead SOT–353 Pinout (Top View)
LOGIC SYMBOL
FUNCTION TABLE
IN A
1
OUT Y
A Input
Y Output
L
H
Z
L
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
 Semiconductor Components Industries, LLC, 2000
May, 2000 – Rev. 1
1
Publication Order Number:
MC74VHC1G05/D
MC74VHC1G05
MAXIMUM RATINGS*
Symbol
Value
Unit
DC Supply Voltage
Characteristics
VCC
–0.5 to +7.0
V
DC Input Voltage
VIN
–0.5 to +7.0
V
DC Output Voltage
VOUT
–0.5 to 7.0
V
Input Diode Current
IIK
–20
mA
Output Diode Current
(VOUT < GND; VOUT > VCC)
IOK
+20
mA
IOUT
+25
mA
DC Supply Current, VCC and GND
ICC
+50
mA
Power dissipation in still air, SC–88A †
PD
200
mW
Lead temperature, 1 mm from case for 10 s
TL
260
°C
DC Output Current, per Pin
Storage temperature
Tstg
–65 to +150
°C
* Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those
indicated may adversely affect device reliability. Functional operation under absolute–maximum–rated conditions is not implied. Functional
operation should be restricted to the Recommended Operating Conditions.
†Derating — SC–88A Package: –3 mW/_C from 65_ to 125_C
RECOMMENDED OPERATING CONDITIONS
Characteristics
Symbol
Min
Max
Unit
DC Supply Voltage
VCC
2.0
5.5
V
DC Input Voltage
VIN
0.0
5.5
V
VOUT
0.0
7.0
V
TA
–55
+85
°C
tr , tf
0
0
100
20
ns/V
DC Output Voltage
Operating Temperature Range
Input Rise and Fall Time
VCC = 3.3V ± 0.3V
VCC = 5.0V ± 0.5V
http://onsemi.com
2
MC74VHC1G05
DC ELECTRICAL CHARACTERISTICS
VCC
Symbol
Parameter
Test Conditions
(V)
Min
1.5
2.1
3.15
3.85
VIH
Minimum High–Level
Input Voltage
2.0
3.0
4.5
5.5
VIL
Maximum Low–Level
Input Voltage
2.0
3.0
4.5
5.5
VOH
Minimum High–Level
Output Voltage
VIN = VIH or VIL
VOL
Maximum Low–Level
Output Voltage
VIN = VIH or VIL
TA ≤ 85°C
TA = 25°C
Typ
Max
Min
1.5
2.1
3.15
3.85
0.5
0.9
1.35
1.65
VIN = VIH or VIL
IOH = –50µA
2.0
3.0
4.5
1.9
2.9
4.4
VIN = VIH or VIL
IOH = –4mA
IOH = –8mA
3.0
4.5
2.58
3.94
VIN = VIH or VIL
IOL = 50µA
2.0
3.0
4.5
VIN = VIH or VIL
IOL = 4mA
IOL = 8mA
Max
TA ≤ 125°C
Min
1.5
2.1
3.15
3.85
0.5
0.9
1.35
1.65
2.0
3.0
4.5
Max
V
0.5
0.9
1.35
1.65
1.9
2.9
4.4
1.9
2.9
4.4
2.48
3.80
2.34
3.66
Unit
V
V
V
0.0
0.0
0.0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
3.0
4.5
0.36
0.36
0.44
0.44
0.52
0.52
V
V
IIN
Maximum Input
Leakage Current
VIN = 5.5V or GND
0 to
5.5
±0.1
±1.0
±1.0
µA
ICC
Maximum Quiescent
Supply Current
VIN = VCC or GND
5.5
2.0
20
40
µA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
W
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎ
W
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
IOPD
Maximum Off–state
Leakage Current
VOUT = 5.5V
0
0.25
2.5
5.0
µA
AC ELECTRICAL CHARACTERISTICS (Cload = 50 pF, Input tr = tf = 3.0ns)
TA ≤ 85°C
TA = 25°C
Symbol
tPZL
tPLZ
CIN
Parameter
Test Conditions
Min
Typ
Max
Min
Max
TA ≤ 125°C
Min
Max
Unit
ns
Maximum Output
Enable Time,
Input A to Y
VCC = 3.0 ± 0.3V
CL = 15 pF
CL = 50 pF
5.0
7.5
7.1
10.6
8.5
12.0
10.0
14.5
VCC = 5.0 ± 0.5V
CL = 15 pF
CL = 50 pF
3.8
5.3
5.5
7.5
6.5
8.5
8.0
10.0
Maximum Output
Di bl Ti
Disable
Time
VCC = 3.0 ± 0.3V, RL = 1K , CL = 50 pF
7.5
10.6
12.0
14.5
VCC = 5.0 ± 0.5V, RL = 1K , CL = 50 pF
5.3
7.5
8.5
10.0
4
10
10
10
Maximum Input
Capacitance
ns
pF
Typical @ 25°C, VCC = 5.0V
CPD
18
Power Dissipation Capacitance (Note 1.)
pF
1. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no–load dynamic
power consumption; PD = CPD VCC2 fin + ICC VCC.
http://onsemi.com
3
MC74VHC1G05
VCC
VCC – 7 V
OVT
RL
VCC
A
50%
GND
A
tPZL tPLZ
HIGH
IMPEDANCE
50% VCC
Y
VOL +0.3 V
Figure 2. Output Voltage Mismatch Application
Figure 3. Switching Waveforms
VCC
PULSE
GENERATOR
6V
R1
DUT
RT
RL
CL
CL = 50 pF equivalent (Includes jig and probe capacitance)
RL = R1 = 500 Ω or equivalent
RT = ZOUT of pulse generator (typically 50 Ω)
MC74VHC1G01
Figure 4. Test Circuit
VCC
A
2.2 kΩ
B
VCC
VCC
MC74VHC1G03
1
C
F = (A • B) + (C+D) + E
D
5
R LED
2
A
MC74VHC1G05
3
4
E
Figure 5. Complex Boolean Functions
MC74VHC1G05
3.3 V
Figure 6. LED Driver
1.5 V
220 Ω
A
GTL
Figure 7. GTL Driver
DEVICE ORDERING INFORMATION
Device Nomenclature
Device Order Number
MC74VHC1G05DFT1
Circuit
Indicator
Temp
Range
Identifier
MC
74
Technology
Device
Function
Package
Suffix
Tape &
Reel
Suffix
Package
Type
Tape and Reel
Size
VHC1G
05
DF
T1
SC–88A /
SOT–353
7–Inch/3000 Unit
http://onsemi.com
4
MC74VHC1G05
PACKAGE DIMENSIONS
SC–88A / SOT–353
DF SUFFIX
5–LEAD PACKAGE
CASE 419A–01
ISSUE B
A
G
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MM.
V
4
–B–
S
1
2
3
D 5 PL
0.2 (0.008)
M
B
MILLIMETERS
MIN
MAX
1.80
2.20
1.15
1.35
0.80
1.10
0.10
0.30
0.65 BSC
–––
0.10
0.10
0.25
0.10
0.30
0.20 REF
2.00
2.20
0.30
0.40
M
0.5 mm (min)
N
J
C
K
0.4 mm (min)
H
INCHES
MIN
MAX
0.071
0.087
0.045
0.053
0.031
0.043
0.004
0.012
0.026 BSC
–––
0.004
0.004
0.010
0.004
0.012
0.008 REF
0.079
0.087
0.012
0.016
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
1.9 mm
http://onsemi.com
5
0.65 mm 0.65 mm
5
DIM
A
B
C
D
G
H
J
K
N
S
V
MC74VHC1G05
10 PITCHES
CUMULATIVE
TOLERANCE ON
TAPE
±0.2 mm
(±0.008”)
P0
K
P2
D
t
TOP
COVER
TAPE
E
A0
+
K0
SEE
NOTE 2
B1
SEE NOTE 2
F
+
B0
W
+
D1
FOR COMPONENTS
2.0 mm × 1.2 mm
AND LARGER
P
EMBOSSMENT
FOR MACHINE REFERENCE
ONLY
INCLUDING DRAFT AND RADII
CONCENTRIC AROUND B0
CENTER LINES
OF CAVITY
USER DIRECTION OF FEED
*TOP COVER
TAPE THICKNESS (t1)
0.10 mm
(0.004”) MAX.
R MIN.
TAPE AND COMPONENTS
SHALL PASS AROUND RADIUS “R”
WITHOUT DAMAGE
EMBOSSED
CARRIER
BENDING RADIUS
100 mm
(3.937”)
MAXIMUM COMPONENT ROTATION
10°
EMBOSSMENT
1 mm MAX
TYPICAL
COMPONENT CAVITY
CENTER LINE
TAPE
1 mm
(0.039”) MAX
TYPICAL
COMPONENT
CENTER LINE
250 mm
(9.843”)
CAMBER (TOP VIEW)
ALLOWABLE CAMBER TO BE 1 mm/100 mm NONACCUMULATIVE OVER 250 mm
Figure 8. Carrier Tape Specifications
EMBOSSED CARRIER DIMENSIONS (See Notes 1 and 2)
Tape
Size
B1
Max
8 mm
4.35 mm
(0.171”)
D
D1
E
F
K
P
P0
P2
R
T
W
1.5 +0.1/
–0.0 mm
(0.059
+0.004/
–0.0”)
1.0 mm
Min
(0.039”)
1.75
±0.1 mm
(0.069
±0.004”)
3.5
±0.5 mm
(1.38
±0.002”)
2.4 mm
(0.094”)
4.0
±0.10 mm
(0.157
±0.004”)
4.0
±0.1 mm
(0.156
±0.004”)
2.0
±0.1 mm
(0.079
±0.002”)
25 mm
(0.98”)
0.3
±0.05 mm
(0.01
+0.0038/
–0.0002”)
8.0
±0.3 mm
(0.315
±0.012”)
1. Metric Dimensions Govern–English are in parentheses for reference only.
2. A0, B0, and K0 are determined by component size. The clearance between the components and the cavity must be within 0.05 mm min to
0.50 mm max. The component cannot rotate more than 10° within the determined cavity
http://onsemi.com
6
MC74VHC1G05
t MAX
13.0 mm ±0.2 mm
(0.512” ±0.008”)
1.5 mm MIN
(0.06”)
A
20.2 mm MIN
(0.795”)
50 mm MIN
(1.969”)
FULL RADIUS
G
Figure 9. Reel Dimensions
REEL DIMENSIONS
Tape
Size
8 mm
A Max
G
t Max
330 mm
(13”)
8.400 mm, +1.5 mm, –0.0
(0.33”, +0.059”, –0.00)
14.4 mm
(0.56”)
DIRECTION OF FEED
BARCODE LABEL
POCKET
Figure 10. Reel Winding Direction
http://onsemi.com
7
HOLE
MC74VHC1G05
CAVITY
TAPE
TOP TAPE
TAPE TRAILER
(Connected to Reel Hub)
NO COMPONENTS
160 mm MIN
COMPONENTS
TAPE LEADER
NO COMPONENTS
400 mm MIN
DIRECTION OF FEED
Figure 11. Tape Ends for Finished Goods
SC–88A/SOT–353 (5 Pin)
DEVICE
“T1” PIN ONE TOWARDS
SPROCKET HOLE
User Direction of Feed
Figure 12. Reel Configuration
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: [email protected]
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (M–F 1:00pm to 5:00pm Munich Time)
Email: ONlit–[email protected]
French Phone: (+1) 303–308–7141 (M–F 1:00pm to 5:00pm Toulouse Time)
Email: ONlit–[email protected]
English Phone: (+1) 303–308–7142 (M–F 12:00pm to 5:00pm UK Time)
Email: [email protected]
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, England, Ireland
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–[email protected]
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–[email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2745
Email: [email protected]
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
http://onsemi.com
8
MC74VHC1G05/D