MOTOROLA MHL9128

Order this document
by MHL9125/D
SEMICONDUCTOR TECHNICAL DATA
The RF Line
Designed specifically for linear amplifier applications in the cellular frequency
band. Internal DC blocking on RF ports reduces external component count and
related circuit area. These devices can be easily combined for higher power
applications.
• Supply Voltage: 15 Vdc (MHL9125)
Supply Voltage: 28 Vdc (MHL9128)
• Third Order Intercept: 43 dBm Typ
• Power Gain: 20 dB Typ (@ f = 900 MHz)
• Excellent Phase Linearity and Group Delay Characteristics
• 50 Ohm Input/Output Impedances
1.3 W, 20 dB
800 – 960 MHz
LINEAR AMPLIFIERS
CASE 448–02
MHL9125, Style 2
MHL9128, Style 1
ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise stated)
Rating
Symbol
Value
Unit
VCC
18
32
Vdc
RF Input Power
Pin
+20
dBm
Operating Case Temperature Range
TC
– 20 to +100
°C
Storage Temperature Range
Tstg
– 40 to +100
°C
DC Supply Voltage
MHL9125
MHL9128
ELECTRICAL CHARACTERISTICS (VCC = 15 Vdc (MHL9125), 28 Vdc (MHL9128); TC = 25°C; 50 Ω System, unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
Supply Current
MHL9128
MHL9125
IDC
400
700
—
—
440
760
mA
Power Gain (1)
(f = 900 MHz)
PG
19
20
21
dB
Absolute Phase Variation (1)
(f = 900 MHz)
∆φ
±8
± 18
Deg.
Gain Flatness
(f = 800 – 960 MHz)
GF
—
0.5
0.75
dB
dBm
Power Output @ 1 dB Comp.
(f = 900 MHz)
Pout 1 dB
30
31
—
Input VSWR
(f = 800 – 920 MHz)
(f = 920 – 960 MHz)
VSWRin
—
—
1.25:1
1.50:1
1.5:1
1.9:1
Output VSWR
(f = 800 – 960 MHz)
VSWRout
—
1.2:1
1.5:1
Third Order Intercept (f1 = 879 MHz, f2 = 884 MHz)
ITO
42
43
—
dBm
Noise Figure
NF
—
7.5
9.5
dB
(f = 960 MHz)
(1) Consult factory for tighter gain and/or phase windows.
REV 1
RF DEVICE DATA
MOTOROLA
Motorola, Inc. 1997
MHL9125 MHL9128
1
PIN CONFIGURATION
1
2
3
4
5
OUTPUT
INPUT
VCC
C1
C1 ≥ 0.01 µF (CHIP)
Figure 1. MHL9125 External Connections
(Case 448–02, Style 2)
PIN CONFIGURATION
1
2
3
4
5
OUTPUT
INPUT
R1
C1
C2
VCC
C1, C2 ≥ 0.01 µF (CHIP)
R1 = 90 Ω, 3 WATTS
Figure 2. MHL9128 External Connections
(Case 448–02, Style 1)
MHL9125 MHL9128
2
MOTOROLA RF DEVICE DATA
PACKAGE DIMENSIONS
–A–
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
U
N
R
DIM
A
B
C
D
E
G
H
J
K
N
Q
R
U
–B–
Q
1
2
3
4
5
K
G
D
5 PL
0.25 (0.010)
T A
M
M
B
M
INCHES
MIN
MAX
1.740
1.760
0.550
0.570
0.405
0.445
0.018
0.022
0.085
0.095
0.200 BSC
0.120 BSC
0.009
0.011
0.180
0.220
1.045
1.075
0.145
0.155
0.455
0.465
1.490
1.510
MILLIMETERS
MIN
MAX
44.20
44.70
13.97
14.49
10.29
11.30
0.46
0.55
2.16
2.41
5.08 BSC
3.05 BSC
0.23
0.28
4.57
5.59
26.54
27.30
3.68
3.94
11.56
11.81
37.85
38.35
C
–T–
E
H
J
5 PL
0.38 (0.015)
M
T A
M
B
M
STYLE 1:
PIN 1.
2.
3.
4.
5.
RF INPUT
GROUND
RESISTOR–GROUND
VCC
RF OUTPUT
STYLE 2:
PIN 1.
2.
3.
4.
5.
RF INPUT
GROUND
VCC1
VCC2
RF OUTPUT
CASE 448–02
ISSUE A
MOTOROLA RF DEVICE DATA
MHL9125 MHL9128
3
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447
JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1,
Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488
Mfax: [email protected] – TOUCHTONE 602–244–6609
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
– US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
INTERNET: http://motorola.com/sps
MHL9125 MHL9128
4
◊
MHL9125/D
MOTOROLA RF DEVICE
DATA