10mm BAYONET BASED LED LAMP BLB101SURC/E12V HYPER RED Features Description !BUILT-IN CURRENT LIMITING RESISTOR FOR DIRECT The Hyper Red source color devices are made with DH APPLICATION OF DIFFERENT ACROSS CURRENT. InGaAlP on GaAs substrate Light Emitting Diode. !LONG LIFE. ! LOW CURRENT, POWER SAVINGS. !LOW MAINTENANCE. ! DIFFERENT COLOR AVAILABLE. ! SOLID STATE, HIGH VIBRATION RESISTANT. ! 12V INTERNAL RESISTOR Package Dimensions 9 Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB2230 APPROVED: J.Lu REV NO: V.2 CHECKED: Allen Liu DATE: APR/15/2003 DRAWN: K.ZHANG PAGE: 1 OF 3 Selection Guide Par t No . Dic e BLB101SURC/E12V Iv (m c d ) V=12V L en s Ty p e HYPER RED (InGaAlP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 650 1800 20 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C 640Sy m b o l Par am et er λpeak Peak Wavelength Hyper Red Dominate Wavelength Hyper Red 630 ∆λ1/2 Spectral Line Half-width Hyper Red 25 IF Forward Current Hyper Red IR Reverse Current Hyper Red D D ev i c e Ty p . Max . 640 21.6 10 Un it s Tes t Co n d it io n s nm VF=12V nm VF=12V nm VF=12V mA VF=12V uA V R = 5V Absolute Maximum Ratings at T)=25°°C Par am et er H y p e r R ed Un it s 270 mW DC Forward Voltage for 12V 14 V Reverse Voltage 5 V Power dissipation for 12V Operating Temperature -40°C To +70°C Storage Temperature -40°C To +85°C SPEC NO: DSAB2230 APPROVED: J.Lu REV NO: V.2 CHECKED: Allen Liu DATE: APR/15/2003 DRAWN: K.ZHANG PAGE: 2 OF 3 Hyper Red SPEC NO: DSAB2230 APPROVED: J.Lu BLB101SURC/E12V REV NO: V.2 CHECKED: Allen Liu DATE: APR/15/2003 DRAWN: K.ZHANG PAGE: 3 OF 3