10mm SCREW BASED LED LAMP BLS101SURC/E12V HYPER RED Features Description !BUILT-IN CURRENT LIMITING RESISTOR FOR DIRECT APPLICATION OF DIFFERENT ACROSS CURRENT. !LONG LIFE. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. !LOW CURRENT, POWER SAVINGS. !LOW MAINTENANCE. !DIFFERENT COLOR AVAILABLE. !SOLID STATE, HIGH VIBRATION RESISTANT. ! 12V INTERNAL RESISTOR Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB2236 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE: APR/14/2003 DRAWN:S.J.HOU PAGE: 1 OF 3 Selection Guide Par t No . Dic e BLS101SURC/E12V Iv (m c d ) V=12V L en s Ty p e HYPER RED (InGaAlP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 650 1800 20 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er Un it s Tes t Co n d it io n s λpeak Peak Wavelength Hyper Red 640 nm VF=12V Dominate Wavelength Hyper Red 6 30 nm VF=12V ∆λ1/2 Spectral Line Half-width Hyper Red 25 nm VF=12V IF Forward Current Hyper Red 21.7 mA VF=12V IR Reverse Current Hyper Red uA V R = 5V D D ev i c e Ty p . Max . 10 Absolute Maximum Ratings at T)=25°°C Par am et er H y p e r R ed Un it s 270 mW DC Forward Voltage for 12V 14 V Reverse Voltage 5 V Power dissipation for 12V Operating Temperature -40°C To +70°C Storage Temperature -40°C To +85°C SPEC NO: DSAB2236 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE: APR/14/2003 DRAWN:S.J.HOU PAGE: 2 OF 3 Hyper Red SPEC NO: DSAB2236 APPROVED: J.LU BLS101SURC/E12V REV NO: V.2 CHECKED: Allen Liu DATE: APR/14/2003 DRAWN:S.J.HOU PAGE: 3 OF 3