BLU6H0410L-600P; BLU6H0410LS-600P Power LDMOS transistor Rev. 2 — 12 July 2013 Product data sheet 1. Product profile 1.1 General description A 600 W LDMOS RF power transistor for radar transmitter applications and industrial applications in the frequency range of 400 MHz to 900 MHz. Table 1. Application information Typical RF performance at VDS = 50 V; in a common source 860 MHz narrowband test circuit; unless otherwise specified. Test signal pulsed, class-AB [1] [1] f IDq PL(AV) PL(M) Gp D IMD3 (MHz) (mA) (W) (W) (dB) (%) (dBc) 860 1.3 - 600 20 58 - Measured at = 10 %; tp = 1 ms. 1.2 Features and benefits Excellent ruggedness (VSWR 40 : 1 through all phases) Optimum thermal behavior and reliability, Rth(j-c) = 0.15 K/W High power gain High efficiency Internal input matching for high gain and optimum broadband operation Excellent reliability Easy power control Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances (RoHS) 1.3 Applications Power amplifier for radar transmitter applications in the 400 MHz to 900 MHz frequency range BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor 2. Pinning information Table 2. Pinning Pin Description Simplified outline Graphic symbol BLU6H0410L-600P (SOT539A) 1 drain1 2 drain2 3 gate1 4 gate2 5 1 2 1 5 3 3 4 5 4 [1] source 2 sym117 BLU6H0410LS-600P (SOT539B) 1 drain1 2 drain2 3 gate1 4 gate2 5 source 1 2 1 5 3 3 4 5 4 [1] 2 sym117 [1] Connected to flange. 3. Ordering information Table 3. Ordering information Type number Package Name Description Version BLU6H0410L-600P - flanged balanced LDMOST ceramic package; 2 mounting holes; 4 leads SOT539A BLU6H0410LS-600P - earless flanged balanced LDMOST ceramic package; 4 leads SOT539B 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). BLU6H0410L-600P_6H0410LS-600P Product data sheet Symbol Parameter Conditions Min Max Unit VDS drain-source voltage - 110 V VGS gate-source voltage 0.5 +11 V Tstg storage temperature 65 +150 C Tj junction temperature - 200 C All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 2 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor 5. Thermal characteristics Table 5. Thermal characteristics Symbol Parameter Conditions Rth(j-c) thermal resistance from junction to case Tj = 150 C Zth(j-c) transient thermal impedance from junction to case [1] [1] Typ Unit 0.15 K/W Tj = 150 C tp = 100 s; = 10 % 0.020 K/W tp = 200 s; = 10 % 0.023 K/W tp = 300 s; = 10 % 0.025 K/W tp = 500 s; = 10 % 0.028 K/W tp = 100 s; = 20 % 0.035 K/W Rth(j-c) is measured under RF conditions. 6. Characteristics Table 6. DC characteristics Tj = 25 C; per section unless otherwise specified. Symbol Parameter Conditions VGS = 0 V; ID = 2.4 mA VGS(th) gate-source threshold voltage VDS = 10 V; ID = 240 mA [1] IDSS drain leakage current VGS = 0 V; VDS = 50 V - - 2.8 A IDSX drain cut-off current VGS = VGS(th) + 3.75 V; VDS = 10 V - 36 - A IGSS gate leakage current VGS = 10 V; VDS = 0 V 280 nA V(BR)DSS drain-source breakdown voltage BLU6H0410L-600P_6H0410LS-600P Product data sheet Min Typ Max Unit [1] 110 - - V 1.4 1.9 2.4 V - - - 143 - m - 220 - pF RDS(on) drain-source on-state resistance VGS = VGS(th) + 3.75 V; ID = 8.5 A [1] Ciss input capacitance VGS = 0 V; VDS = 50 V; f = 1 MHz [2] Coss output capacitance VGS = 0 V; VDS = 50 V; f = 1 MHz - 74 - pF Crss reverse transfer capacitance VGS = 0 V; VDS = 50 V; f = 1 MHz - 1.2 - pF [1] ID is the drain current. [2] Capacitance values without internal matching. All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 3 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor Table 7. RF characteristics Test signal: 2-Tone; Tcase = 25 C unless otherwise specified; in a class-AB NXP production narrowband test circuit. Symbol Parameter VDS drain-source voltage Conditions Min Typ Max Unit [1] - 50 - V - 1.3 - A IDq quiescent drain current PL(AV) average output power f1 = 860 MHz; f2 = 860.1 MHz 250 - - W Gp power gain f1 = 860 MHz; f2 = 860.1 MHz 20 21 - dB D drain efficiency f1 = 860 MHz; f2 = 860.1 MHz 42 46 - % IMD3 third-order intermodulation distortion f1 = 860 MHz; f2 = 860.1 MHz - 32 28 dBc [1] IDq for total device. 001aam579 400 Coss (pF) 300 200 100 0 0 20 40 60 VDS (V) VGS = 0 V; f = 1 MHz. Fig 1. Output capacitance as a function of drain-source voltage; typical values per section 6.1 Ruggedness in class-AB operation The BLU6H0410L-600P and BLU6H0410LS-600P are capable of withstanding a load mismatch corresponding to VSWR 40 : 1 through all phases under the following conditions: VDS = 50 V; f = 860 MHz at rated power. BLU6H0410L-600P_6H0410LS-600P Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 4 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor 7. Application information 7.1 Narrowband RF figures 7.1.1 2-Tone 001aan761 24 Gp (dB) 20 Gp (dB) ηD (%) Gp 0 IMD3 (dBc) Gp 20 40 ηD 001aan762 24 60 -20 IMD3 16 16 20 12 0 100 200 300 0 400 500 PL(AV) (W) 12 0 VDS = 50 V; IDq = 1.3 A; measured in a common source narrowband 860 MHz test circuit. Fig 2. -40 2-Tone power gain and drain efficiency as function of load power; typical values 100 200 300 -60 400 500 PL(AV) (W) VDS = 50 V; IDq = 1.3 A; measured in a common source narrowband 860 MHz test circuit. Fig 3. 2-Tone power gain and third order intermodulation distortion as function of load power; typical values 7.2 Impedance information drain 1 gate 1 Zi ZL gate 2 drain 2 001aan207 Fig 4. Definition of transistor impedance Table 8. Typical push-pull impedance Simulated Zi and ZL device impedance; impedance info at VDS = 50 V and PL(M) = 600 W. BLU6H0410L-600P_6H0410LS-600P Product data sheet f Zi ZL MHz 300 0.617 j1.715 4.989 + j1.365 325 0.635 j1.355 4.867 + j1.424 350 0.655 j1.026 4.741 + j1.472 375 0.677 j0.721 4.614 + j1.511 All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 5 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor Table 8. Typical push-pull impedance …continued Simulated Zi and ZL device impedance; impedance info at VDS = 50 V and PL(M) = 600 W. BLU6H0410L-600P_6H0410LS-600P Product data sheet f Zi ZL MHz 400 0.702 j0.435 4.486 + j1.540 425 0.731 j0.164 4.357 + j1.559 450 0.762 + j0.096 4.228 + j1.570 475 0.798 + j0.347 4.100 + j1.573 500 0.839 + j0.592 4.974 + j1.567 525 0.884 + j0.833 3.850 + j1.554 550 0.936 + j1.072 3.728 + j1.534 575 0.995 + j1.310 3.608 + j1.508 600 1.063 + j1.549 3.492 + j1.475 625 1.141 + j1.791 3.378 + j1.437 650 1.230 + j2.037 3.268 + j1.394 675 1.334 + j2.289 3.161 + j1.347 700 1.456 + j2.548 3.057 + j1.295 725 1.599 + j2.814 2.957 + j1.239 750 1.768 + j3.090 2.860 + j1.180 775 1.971 + j3.376 2.676 + j1.118 800 2.214 + j3.671 2.677 + j1.053 825 2.510 + j3.975 2.591 + j0.985 850 2.873 + j4.282 2.508 + j0.915 875 3.320 + j4.584 2.428 + j0.843 900 3.875 + j4.865 2.351 + j0.770 925 4.562 + j5.095 2.277 + j0.695 950 5.409 + j5.223 2.206 + j0.618 975 6.426 + j5.166 2.138 + j0.540 1000 7.587 + j4.807 2.073 + j0.461 All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 6 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor 8. Test information Table 9. List of components For test circuit, see Figure 5, Figure 6 and Figure 7. Component Description Value B1, B2 semi rigid coax 25 ; 49.5 mm Remarks UT-090C-25 (EZ 90-25) C1 multilayer ceramic chip capacitor 12 pF [1] C2, C3, C4, C5, C6 multilayer ceramic chip capacitor 8.2 pF [1] C7 multilayer ceramic chip capacitor 6.8 pF [2] C8 multilayer ceramic chip capacitor 2.7 pF [2] C9 multilayer ceramic chip capacitor 2.2 pF [2] C10, C13, C14 multilayer ceramic chip capacitor 100 pF [3] C11, C12 multilayer ceramic chip capacitor 10 pF [2] C15, C16 multilayer ceramic chip capacitor 4.7 F; 50 V C17, C18, C23, C24 multilayer ceramic chip capacitor 100 pF C19, C20 multilayer ceramic chip capacitor 10 F; 50 V C21, C22 electrolytic capacitor 470 F; 63 V C30 multilayer ceramic chip capacitor 10 pF [4] C31 multilayer ceramic chip capacitor 9.1 pF [4] C32 multilayer ceramic chip capacitor 3.9 pF [4] C33, C34, C35 multilayer ceramic chip capacitor 100 pF [4] C36, C37 multilayer ceramic chip capacitor 4.7 F; 50 V L1 microstrip - [5] (W L) 15 mm 13 mm - [5] (W L) 5 mm 26 mm - [5] (W L) 2 mm 49.5 mm (W L) 1.7 mm 3.5 mm L2 microstrip L3, L32 microstrip Kemet C1210X475K5RAC-TU or capacitor of same quality. [2] TDK C570X7R1H106KT000N or capacitor of same quality. TDK C4532X7R1E475MT020U or capacitor of same quality. L4 microstrip - [5] L5 microstrip - [5] (W L) 2 mm 9.5 mm - [5] (W L) 5 mm 13 mm - [5] (W L) 2 mm 11 mm [5] (W L) 2 mm 3 mm L30 microstrip L31 microstrip L33 microstrip - R1, R2 wire resistor 10 R3, R4 SMD resistor 5.6 R5, R6 wire resistor 100 R7, R8 potentiometer 10 k 0805 [1] American technical ceramics type 800R or capacitor of same quality. [2] American technical ceramics type 800B or capacitor of same quality. [3] American technical ceramics type 180R or capacitor of same quality. [4] American technical ceramics type 100A or capacitor of same quality. [5] Printed-Circuit Board (PCB): Taconic RF35; r = 3.5 F/m; height = 0.762 mm; Cu (top/bottom metallization); thickness copper plating = 35 m. BLU6H0410L-600P_6H0410LS-600P Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 7 of 15 xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx NXP Semiconductors BLU6H0410L-600P_6H0410LS-600P Product data sheet +VG1(test) R7 C19 Rev. 2 — 12 July 2013 All information provided in this document is subject to legal disclaimers. R1 C17 R5 +VD1(test) C36 L5 R3 C34 L32 50 Ω C33 C21 C11 L30 C5 C3 C8 L4 B2 C10 50 Ω B1 C31 R4 C15 L2 C1 C32 L33 C13 L3 L1 L31 C30 C2 C4 C35 C6 C7 C9 C12 C37 C14 C16 C22 C18 R2 C24 +VD2(test) C20 R8 +VG2(test) Fig 5. Class-AB common source broadband amplifier; VD1(test), VD2(test), VG1(test) and VG2(test) are drain and gate test voltages Power LDMOS transistor 8 of 15 © NXP B.V. 2013. All rights reserved. See Table 9 for a list of components. 001aan763 BLU6H0410L(S)-600P R6 C23 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor L3 L32 L5 L30 L1 50 mm L2 L31 L33 L4 L31 L2 L1 L30 L5 L32 L3 105 mm 001aam588 See Table 9 for a list of components. Fig 6. Printed-Circuit Board (PCB) for class-AB common source amplifier 49.6 mm 44 mm +VG1(test) +VD1(test) C23 R7 C36 + R1 C17 R5 C19 C21 C11 R3 C34 C33 50 Ω C15 C10 C1 C30 C32 C3 C7 C5 C9 C13 50 Ω C31 C35 C2 C4 C6 C14 C8 C12 4 mm C16 R4 C22 C37 R6 C20 R2 R8 C24 C18 + +VG2(test) +VD2(test) 6.3 mm 25.3 mm 26.3 mm 36.8 mm 001aan764 See Table 9 for a list of components. Fig 7. Component layout for class-AB common source amplifier BLU6H0410L-600P_6H0410LS-600P Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 9 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor 9. Package outline Flanged balanced ceramic package; 2 mounting holes; 4 leads SOT539A D A F D1 U1 B q C w2 M C M H1 1 c 2 E1 p H U2 5 L 3 A E w1 M A M B M 4 w3 M b Q e 0 5 10 mm scale DIMENSIONS (millimetre dimensions are derived from the original inch dimensions) UNIT A mm 4.7 4.2 inches b c D D1 e E E1 11.81 0.18 31.55 31.52 9.50 13.72 11.56 0.10 30.94 30.96 9.30 9.53 9.27 F H H1 L 1.75 17.12 25.53 3.48 1.50 16.10 25.27 2.97 p Q q 3.30 3.05 2.26 2.01 35.56 U1 U2 w1 41.28 10.29 0.25 41.02 10.03 w2 w3 0.51 0.25 0.374 0.375 0.069 0.674 1.005 0.137 0.130 0.089 0.185 0.465 0.007 1.242 1.241 1.625 0.405 1.400 0.010 0.020 0.010 0.540 0.366 0.365 0.059 0.634 0.995 0.117 0.120 0.079 0.165 0.455 0.004 1.218 1.219 1.615 0.395 Note 1. millimeter dimensions are derived from the original inch dimensions. 2. recommended screw pitch dimension of 1.52 inch (38.6 mm) based on M3 screw. OUTLINE VERSION REFERENCES IEC JEDEC EIAJ ISSUE DATE 10-02-02 12-05-02 SOT539A Fig 8. EUROPEAN PROJECTION Package outline SOT539A BLU6H0410L-600P_6H0410LS-600P Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 10 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor Earless flanged balanced ceramic package; 4 leads SOT539B D A F 5 D1 D U1 H1 w2 1 c D 2 E1 U2 H E L 3 4 w3 b Q e 0 5 10 mm scale Dimensions Unit(1) w2 w3 0.25 0.25 max 0.185 0.465 0.007 1.242 1.241 0.374 0.375 0.069 0.674 1.005 0.137 0.089 1.275 0.405 0.54 inches nom 0.01 min 0.165 0.455 0.004 1.218 1.219 0.366 0.365 0.059 0.634 0.995 0.117 0.079 1.265 0.395 0.01 mm max nom min A b E E1 4.7 11.81 0.18 31.55 31.52 c D D1 9.5 9.53 e 4.2 11.56 0.10 30.94 30.96 9.3 9.27 F H H1 L Q U1 U2 1.75 17.12 25.53 3.48 2.26 32.39 10.29 1.50 16.10 25.27 2.97 2.01 32.13 10.03 13.72 Note 1. millimeter dimensions are derived from the original inch dimensions. Outline version References IEC JEDEC JEITA Issue date 12-05-02 13-05-24 SOT539B Fig 9. sot539b_po European projection Package outline SOT539B BLU6H0410L-600P_6H0410LS-600P Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 11 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor 10. Handling information CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling electrostatic sensitive devices. Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or equivalent standards. 11. Abbreviations Table 10. Abbreviations Acronym Description LDMOS Laterally Diffused Metal-Oxide Semiconductor LDMOST Laterally Diffused Metal-Oxide Semiconductor Transistor RF Radio Frequency SMD Surface Mounted Device VSWR Voltage Standing-Wave Ratio 12. Revision history Table 11. Revision history Document ID Release date Data sheet status BLU6H0410L-600P_6H0410LS-600P v.2 20130712 Product data sheet Modifications: • Product data sheet Supersedes - BLU6H0410L-600P_6H0410LS-600P v.1 The package outline Figure 9 is updated. BLU6H0410L-600P_6H0410LS-600P v.1 20120426 Product data sheet BLU6H0410L-600P_6H0410LS-600P Change notice - All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 - © NXP B.V. 2013. All rights reserved. 12 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 13.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 13.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. BLU6H0410L-600P_6H0410LS-600P Product data sheet Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 13 of 15 BLU6H0410L(S)-600P NXP Semiconductors Power LDMOS transistor Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 13.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] BLU6H0410L-600P_6H0410LS-600P Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 July 2013 © NXP B.V. 2013. All rights reserved. 14 of 15 NXP Semiconductors BLU6H0410L(S)-600P Power LDMOS transistor 15. Contents 1 1.1 1.2 1.3 2 3 4 5 6 6.1 7 7.1 7.1.1 7.2 8 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Ruggedness in class-AB operation . . . . . . . . . 4 Application information. . . . . . . . . . . . . . . . . . . 5 Narrowband RF figures . . . . . . . . . . . . . . . . . . 5 2-Tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Impedance information . . . . . . . . . . . . . . . . . . . 5 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Handling information. . . . . . . . . . . . . . . . . . . . 12 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Contact information. . . . . . . . . . . . . . . . . . . . . 14 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2013. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 12 July 2013 Document identifier: BLU6H0410L-600P_6H0410LS-600P