Murata BNX023-01 Block type emifil (lc combined) smd type Datasheet

Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr (LC Combined) > SMD Type
Data Sheet
1
Block Type EMIFILr (LC Combined)
SMD Type
BNX02* Series
■ Dimensions
■ Insertion Loss Characteristics (Main Items)
12.1±0.2
20
(4)
1.05±0.2
1.6±0.3
0.3±0.1
(3)
(4)
7.0±0.2 1.55±0.2
1.3±0.2
(2.45)
(1)
(2)
(4)
1.0±0.3
60
80
100
0.1
: Electrode
2.5±0.2 1.55±0.2
(4)
10
Frequency (MHz)
100
1000
■ Packaging
L1
Code
Packaging
Minimum Quantity
L
180mm Embossed Tape
400
K
330mm Embossed Tape
1500
B
Bulk(Bag)
100
L3
C2
B
L2
1
(in mm)
■ Equivalent Circuit
(1)
BNX022-01
BNX023-01
40
(2)
0.3±0.1
(1)
4.2±0.3
(3)
(4)
Insertion Loss (dB)
BNX022
3.1±0.2
(3)
0
(2)
9.1±0.2
(1)
CB (2)
C1
CG (4)
(3) PSG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
■ Rated Value (p: packaging code)
Part Number
Rated Voltage Withstand Voltage
Rated Current
Insulation Resistance(min.)
Insertion Loss
BNX022-01p
50Vdc
125Vdc
10A
500M ohm
1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm)
BNX023-01p
100Vdc
250Vdc
15A
500M ohm
1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm)
Operating Temperature Range: -40°C to +125°C
In operating temperatures exceeding +85°C, derating of current is necessary.
Continued on the following page.
o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2009.5.1
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr (LC Combined) > SMD Type
Data Sheet
2
Continued from the preceding page.
■ Derating of Rated current
In operating temperatures exceeding
+85°C, derating of current is necessary for
BNX022 series. Please apply the derating
curve shown in chart according to the
operating temperature.
Derated Current (A)
Derating
10
1
0
-40
85
125
Operating Temperature (°C)
■ Derating of Rated current
In operating temperatures exceeding
+85°C, derating of current is necessary for
BNX023 series. Please apply the derating
curve shown in chart according to the
operating temperature.
Derating
Derated Current (A)
15
1
0
-40
85
125
Operating Temperature (°C)
■ !Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2009.5.1
http://www.murata.com/
Similar pages