Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 50A HIGH CURRENT SILICON BRIDGE RECTIFIERS BP50-005 THRU BP50-10 FEATURES z CURRENT RATING 50A z REVERSE VOLTAGE RATING UP TO 1000V z TYPICAL IR LESS THAN 1μA z HIGH TEMPERATURE SOLDERING GUARANTEED: 260°C /10 SECOND HOLE FOR No.10 SCREW 0.2” (5.08)diam. 1.13(28.7) 1.12(28.4) HOLE FOR No.10 SCREW 0.2” (5.08)diam. 0.652 (16.6) ＋ 0.657(16.7) 0.618(15.7) 0.728(18.5) 0.689(17.5) MECHANICAL DATA z CASE: METAL HEAT SINK CASE, ELECTRICALLY INSULATED DIMENSIONS IN INCHES AND (MILLIMETERS) 0.094 z TERMINALS: UNIVERSAL .25” (6.3mm) FAST ON (2.4) diam z MOUNTING METHOD: BOLT DOWN ON HEAT SINK WITH SILICON THERMAL COMPOUND BETWEEN BRIDGE AND MOUNTING SURFACE FOR MAXIMUM HEAT TRANSFER EFFICIENCY H* 0.442(11.23) 0.432(10.97) z WEIGHT : 20 GRAMS 1.13(28.7) 1.12(28.4) 0.469(11.90) 0.429(10.90) 0.752(19.10) 0.673(17.10) 0.565(14.35) 0.525(13.35) 0.25 (6.35) 0.042(1.07) 0.038(0.97) L* I* 1.200 (30.5) MIN 1.00(25.40) H* 0.90(22.86) 0.442(11.23) 0.432(10.97) DIM H* I* L* MIN 0.295(7.5) 0.74(18.80) 1.09(27.89) MAX 0.311(7.9) 0.84(21.30) - REMARK SUFFIX “S” THIN CASE SUFFIX “S” THIN CASE SUFFIX “S” THIN CASE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL BP50-005 BP50-01 BP50-02 BP50-04 BP50-06 BP50-08 BP50-10 UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED OUTPUT CURRENT AT TC=55°C PEAK FORWARD SURGE CURRENT SINGLE SINE-WAVE SUPERIMPOSED ON RATED LOAD STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 50.0 A IFSM 550 A TSTG TOP - 55 TO + 175 - 55 TO + 175 ºC ºC ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL BP50-005 BP50-01 BP50-02 BP50-04 BP50-06 BP50-08 BP50-10 UNITS MAXIMUM INSTANTANEOUS FORWARD VOLTAGE PER BRIDGE ELEMENT AT SPECIFIED CURRENT MAXIMUM REVERSE DC CURRENT AT RATE DC BLOCKING VOLTAGE PER ELEMENT NOTE: Suffix No. Versus Different Cases And Terminals VF 1.1 V IR 10 μA CASE SUFFIX No TERMINAL FAST ON TERMINALS WIRE LEAD TERMINALS IN LINE PIN CONFIGURATION NORMAL METAL CASE THIN METAL CASE NORMAL PLASTIC CASE ALUMINUM BASE THIN PLASTIC CASE ALUMINUM BASE PS NO SUFFIX W S WS P PW PWS － － L LS BP50-005 THRU BP50-10 Page: 1 RATINGS AND CHARACTERISTIC CURVES BP50-005 THRU BP50-10 FIG 2 TYPICAL REVERSE CHARACTERISTICS AT TJ=25ºC 50 10 45 INSTANTANEOUS REVERSE CURRENT MICROAMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG 1 MAXIMUM OUTPUT RECTIFIED CURRENT 40 35 30 25 20 15 10 5 1.0 0.1 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE 0 20 40 60 80 100 120 140 160 180 INSTANTANEOUS FORWARD CURRENT, AMPERES FIG 3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 500 PEAK FORWARD SURGE CURRENT, AMPERES CASE TEMPERATURE TC FIG 4 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 600 400 300 200 100 TJ=175ºC SINGLE SINE WAVE (JEDEC Method) 40 1 1.5 2 3 100 4 5 6 7 8 910 15 20 30 4050 70 100 NUMBER OF CYCLES AT 60HZ 50 .442（11.23） 10 .432（10.97） 5 1.13（28.7） 1.0 1.12（28.4） TJ=25ºC Pulse Width 300us 1% Duty Cycle 0.1 0.6 0.8 1.0 － AC ＋ .550 （13.9） .75 （19.1） 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS .120（3.05） .040（1.2） .200 （5.1） BP50-L BP50-005 THRU BP50-10 .140（3.6） IN LINE PIN CONFIGURATION (PLASTIC CASE) Page: 2