Shunye BR1505W Silicon bridge rectifier Datasheet

BR1505W THRU BR1510W
SILICON BRIDGE RECTIFIERS
Reverse Voltage - 50 to 1000 Volts
Forward Current - 15.0 Amperes
BR-15W
FEATURES
0.452
(11.5)
METAL
HEAT SINK
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Ideal for printed circuit boards
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260 C/10 seconds,at 5 lbs. (2.3kg) tension
MAX.
0.591
MAX.
(15.0)
0.042(1.10) DIA.
0.038(0.97)
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
HOLE FOR
NO.8 SCREW
MECHANICAL DATA
AC
+
0.732(18.6)
0.692(17.6)
1.181(30.0)
1.102(28.0)
Case: Molded plastic body
Terminals: Lead 0.040” (1.02mm) diameter.
Polarity: Polarity symbols marked on case
Mounting:Thru hole for #8 screw,20in.-lbs. torque max.
Weight:0.61 ounce, 17.4 grams
0.468(11.9)
0.429(10.9)
-
AC
0.732(18.6)
0.692(17.6)
0.033x.250
(0.8x6.4)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for current capacitive load urrent derate by 20%.
SYMBOLS
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified
current at TC=55 C (Note 1,2)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Rating for Fusing(t<8.3ms)
Maximum instantaneous forward voltage dorp
per bridge element at 7.5A
Maximum DC reverse current
TA=25 C
at rated DC blocking voltage
TA=100 C
Isolation voltage from case to leads
Typical Thermal Resistance (Note 2)
Operating junction temperature range
storage temperature range
VRRM
VRMS
VDC
BR
1505W
50
35
50
BR
151W
100
70
100
BR
152W
BR
154W
200
140
200
400
280
400
BR
156W
600
420
600
BR
158W
800
560
800
BR
1510W
UNITS
1000
700
1000
VOLTS
VOLTS
VOLTS
I(AV)
15
Amps
IFSM
300.0
Amps
I2t
373
A2s
VF
1.1
Volts
10
1.0
2500
2.0
-65 to +150
-65 to +150
uA
mA
IR
VISO
RqJA
TJ
TSTG
NOTES:
1.Unit mounted on 5” x 4” x3” thick(12.8cmx10.2cmx7.3cm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
www.shunyegroup.com.cn
VAC
C/W
C
C
RATINGS AND CHARACTERISTIC CURVES BR1505W THRU BR1510W
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
FIG. 1- FORWARD CURRENT DERATING CURVE
12
9
Single Phase
Half Wave 60Hz
Resistive or
inductive Load
6
3
0
0
25
50
FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT
£PEAK FORWARD SURGE CURRENT,
AMPERES
15
75
100
125
150
300
250
200
150
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
100
175
50
1
10
AMBIENT TEMPERATURE, C
FIG. 4-TYPICAL REVERSE CHARACTERISTICS
FIG. 3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
1,000
100
10
1
TJ=25 C
PULSE WIDTH=300 ms
1%DUTY CYCLE
0.1
0.6
0.8
1.0
1.2
1.4
1.5
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD
CURRENT,AMPERES
200
100
TJ=100 C
10
1
TJ=25 C
0.1
0.01
INSTANTANEOUS FORWARD VOLEAGE,
VOLTS
20
40
60
80
TJ=25 C
100
10
1
0.1
0.01
0.01
0.1
1
10
10
0.1
1.0
10
100
FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE
TRANSIENT THERMAL IMPEDANCE,
C/W
FIG. 5-TYPICAL JUNCTION CAPACITANCE
1000
0
PERCENT OF PEAK REVERSE VOLTAGE,%
2000
JUNCTION CAPACITANCE, pF
100
NUMBER OF CYCLES AT 60 Hz
100
REVERSE VOLTAGE,VOLTS
www.shunyegroup.com.cn
t,PULSE DURATION,sec.
100
Similar pages