MIC BR354W Single-phase bridge rectifier Datasheet

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
BR3505W THRU BR3510W
50 to 1000 Volts
35 Amperes
VOLTAGE RANGE
CURRENT
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
l High forward surge current capability
l Integrally molded heatsink provide very low thermal resistance
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260 oC/10 second, at 5 lbs. (2.3kg) tension.
BR-35W
AC
+
0.732( 18.6)
0.692( 17.6)
0.47( 11.9)
0.43( 10.9)
-
0.205( 5.2)
0.197( 5.0)
AC
0.732( 18.6)
0.692( 17.6)
1.13( 28.8)
1.11( 28.2)
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Plated lead 0.25”(6.35mm) lugs.
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max.
l Weight:0.61ounce, 17.4 grams
METAL HEAT SINK
0.442( 11.2)
0.432( 10.9)
EXOPY CASE
0.78( 19.8) MIN
0.042( 1.10) DIA
0.038( 0.97) TYP
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS
BR3505W BR351W BR352W BR354W BR356W BR358W BR3510W
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum Average Forward
Rectified Output Current, at TC=50℃(Note1,2)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
I(AV)
35
Amps
IFSM
400
Amps
2
664
1.1
10
1.0
A2S
Volts
µAmps
mAmps
Rating for Fusing(t<8.3ms)
Maximum Instantaneous Forward Voltage at 17.5A
Maximum DC Reverse Current at rated TA=25℃
DC blocking voltage
TA=100℃
IT
VF
Isolation Voltage from case to leads
VISO
2500
VAC
Typical Thermal Resistance (Note 1,2)
RθJC
2.0
℃/W
TJ
-55 to +150
℃
TSTG
-55 to +150
℃
Operating Temperature Range
Storage Temperature Range
IR
NOTES:
1.
Unit mounted on 9”×3.5”×4.6” thick (23cm×9cm×11.8cm) Al. plate.
2.
Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
E-mail: [email protected]
Web Site: www.cnmic.com
1/2
MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
BR3505W THRU BR3510W
E-mail: [email protected]
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
35 Amperes
Web Site: www.cnmic.com
2/2
Similar pages