Sensortechnics BTEL5P10D4C Precision very low differential pressure transmitter Datasheet

BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
FEATURES
· 1 to 10 mbar, 1 to 10 "H2O
differential pressure
· High level output,
1...6 V or 4...20 mA (2-wire connection)
· Precision temperature compensated
and calibrated
· Rugged aluminium housing
· Female 1/8" BSP and 1/8" NPT fittings
MEDIA COMPATIBILITY
Pressure inlet:
Non-corrosive, non-ionic working fluids such as air, dry
gases and the like
Housing:
Aluminium, protection class IP 67 (according to
DIN EN 60529) respectively NEMA 61
ELECTRICAL CONNECTION
SPECIFICATIONS12
1...6 V output version
1
Maximum ratings
12 to 32 V
+Vs
11
Supply voltage
Output current
BTEL/PTUL5...D1...
Source
Sink
BTEL/PTUL5...D4...
Temperature limits
Storage
Operating
Compensated
Proof pressure2
BTEL/PTUL5...01D...
BTEL/PTUL5...02D...
all others
Pressure at any port3
BTEL/PTUL5...01D...
BTEL/PTUL5...02D...
all others
June 2008 / 094
12 to 32 V
sensor
2
Vout
4
20 mA
10 mA
30 mA
-40 to 100°C
-25 to 85°C
0 to 50°C
GND
-Vs
3
case
4...20 mA output version
1
12 to 32 V
+Vs
250 mbar / 100 "H2O
250 mbar / 100 "H2O
350 mbar / 150 "H2O
sensor
V
4
-Vs
500 mbar / 200 "H2O
500 mbar / 200 "H2O
750 mbar / 300 "H2O
V
RL
GND
3
case
1/6
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
COMMON PERFORMANCE CHARACTERISTICS9
Characteristics
Operating pressure
Min.
Typ.
Max.
BTEL5001...
0
1
BTEL5P01...
-1
1
BTEL5002...
0
2
BTEL5P02...
-2
2
BTEL5005...
0
5
BTEL5P05...
-5
5
BTEL5010...
0
10
BTEL5P10...
-10
10
PTUL5001...
0
1
PTUL5P01...
-1
1
PTUL5002...
0
2
PTUL5P02...
-2
2
PTUL5005...
0
5
PTUL5P05...
-5
5
PTUL5010...
0
10
PTUL5P10...
-10
10
Unit
mbar
Position sensitivity
0.5
Non-linearity and hysteresis4
±0.1
Output noise (0 < f < 1 kHz)
0.04
"H2O
%FSO/g
±0.25
%FSO
Long term stability5
Thermal effects (0 to 50°C)6
Offset
Span
Response time (10 to 90 %)
June 2008 / 094
BTEL/PTUL5...01D...
±0.5
all others
±0.2
BTEL5...01D...
±0.08
±0.16
BTEL5...02D.../
PTUL5...01D...
±0.04
±0.10
all others
±0.02
±0.06
±0.04
±0.08
%FSO/°C
1
ms
2/6
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
PERFORMANCE CHARACTERISTICS9
1...6 V output versions (unless otherwise noted VS = 15 V, tamb = 25°C, RL > 100 kΩ, com. mode pressure = 0)
Characteristics
7
Zero pressure offset
BTEL/PTUL50...D1...
BTEL/PTUL5P...D1...
BTEL/PTUL50...D1...
BTEL/PTUL5P...D1...
Full scale span8
Min.
Typ.
Max.
0.9
3.4
4.9
2.4
1.0
3.5
5.0
2.5
6.0
1.1
3.6
5.1
2.6
Full scale output
Output impedance
50
Power supply rejection
Offset
Span
Power consumption
Unit
V
Ω
0.05
0.03
%FSO/V
60
mW
4...20 mA output versions (unless otherwise noted VS = 15 V, tamb = 25°C, RL = 100 Ω, com. mode pressure = 0)
Characteristics
7
Zero pressure offset
BTEL/PTUL50...D4...
BTEL/PTUL5P...D4...
BTEL/PTUL50...D4...
BTEL/PTUL5P...D4...
Full scale span8
Min.
Typ.
Max.
3.9
11.9
15.9
7.9
4.0
12.0
16.0
8.0
20.0
4.1
12.1
16.1
8.1
Full scale output
Output impedance
0.1
Power supply rejection
Offset
Span
Power consumption (IL = 20 mA)
Unit
mA
Ω
0.05
0.03
%FSO/V
260
mW
ELECTROMAGNETIC CAPABILITY10
Test conditions
Radiated, radio frequency
electromagnetic field
immunity (RFI)
Electrical fast transient /
burst immunity (EFT)
Electrostatic discharge
immunity test (ESD)
Immunity to conducted
disturbances induced by
radio-frequency fields
June 2008 / 094
EN61000-4-3:
EN61000-4-4:
EN61000-4-2:
EN61000-4-6:
Grade 3
10 V/m, 80 MHz to 1000 MHz
80 % AMC (1 kHz)
Grade 3
±2 kV
Grade 4
±8 kV, contact discharge
Grade 3
0,15 to 80 MHz
10 V, 80 % AMC (1 kHz)
Criterion
Interference
A
<1 % FSO
B
<1 % FSO
B
<1 % FSO
A
<1 % FSO
3/6
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
Specification notes:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
IP 67 protection for BTEL/PTUL5...A is given with locked connector only.
Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element.
This is the highest pressure which can be applied to any port at any time. At the same time the differential pressure
between the ports H and L must not exceed the maximum proof pressure.
Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span.
Long term stability is the change in output after one year or 1 million pressure cycles.
Thermal effects tested and guaranteed from 0...50 °C relative to 25°. All specifications shown are relative to 25°C.
Calibrated after minimum 3 minutes warm-up time.
Full scale span is the algebraic difference between the positive full scale output and zero pressure offset.
Higher pressure applied to port H.
Test are in accordance with EN61000-6-2, April 1999.
The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the
load limitation diagram.
CE-labelling is in accordance with 89/336/EEC.
LOAD LIMITATION
4...20 mA output version
1200
Ohm
1000
800
600
operating
range
400
200
0
June 2008 / 094
10
20
30 V
Vsupply
4/6
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
OUTLINE DRAWING
Connector version
NOM 86.0 (3.39)
40.0
(1.58)
72.0 (2.84)
20.0
(0.79)
H: high pressure port
L: low pressure port
13.5 diam. (0.53)
mating plug
8.0 (0.31) min.
4
M12 x 1
(0.47)
8.0 (0.31) min.
2 x M5
(UNC 10-24)
9.0
(0.35)
BTE.../PTE...: 2 x 1/8" BSP
PTU...: 2 x 1/8" NPT
mass: typ. 170 g
dimensions in mm (inches)
1
3
2
ELECTRICAL CONNECTION
Connection
1...6 V
4...20 mA
Pin
output
output
1
+Vs
+Vs
2
Vout
NC
3
case
case
4
-Vs
-Vs
Cable version
40.0
(1.58)
90.0 (3.54)
72.0 (2.84)
20.0
(0.79)
H: high pressure port
L: low pressure port
13.5 diam. (0.53)
8.0 (0.31) min.
1 m (3.3 ft) shielded cable
4 x 0.25 mm² (AWG24)
8.0 (0.31) min.
2 x M5
(UNC 10-24)
mass: typ. 220 g
dimensions in mm (inches)
June 2008 / 094
9.0
(0.35)
BTE.../PTE...: 2 x 1/8" BSP
PTU...: 2 x 1/8" NPT
ELECTRICAL CONNECTION
Connection
4...20 mA
1...6 V
output
output
bare
case/shield case/shield
brown
+Vs
+Vs
white
NC
NC
NC
green
Vout
yellow
-Vs
-Vs
5/6
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
RECOMMENDED CABLE/CONNECTOR ACCESSORY
for connector version
Order number ZK000101, other cable lengths on special request
NOM 2 m
PIN CONNECTION
36.5
Pin
1
2
3
4
NOM
60
Flying lead end
brown
green
white + shield
yellow
Included in delivery!
M12 x 1
Ø 20
dimensions in mm
ORDERING INFORMATION
BTEL5/PTUL5
x
x
x
Output signal
1: 1...6 V
4: 4...20 mA
Reading
0:
unidirectional reading
P:
bidirectional reading
Note:
D
Electrical connection
A: connector version
C: cable version
Calibration
BTEL: calibration in mbar
PTUL: calibration in "H2O
Pressure range
01: 1 mbar / 1 "H2O
02:
2 mbar / 2 "H2O
05:
5 mbar / 5 "H2O
10: 10 mbar /10 "H2O
xx
Differential pressure
(0...1 mbar not available
for output signal 1...6 V)
Other pressure ranges and options are widely available.
Please contact your nearest Sensortechnics sales representative.
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
June 2008 / 094
6/6
www.sensortechnics.com
Similar pages