Optoway BTR-7600AMG 1310 nm tx / 1550 nm rx , 3.3v / 1.25 gb/s rohs compliant single-fiber mm transceiver Datasheet

Optoway
BTR-7600MG
1
*********************************************************************************************************************************************************************
BTR-7600MG / BTR-7600CMG / BTR-7600AMG / BTR-7600ACMG
1310 nm TX / 1550 nm RX , 3.3V / 1.25 Gb/s RoHS Compliant Single-Fiber MM Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l
l
l
l
l
l
l
l
l
l
l
l
l
l
The BTR-7600MG series is high performance module for
multi-mode single fiber communications by using 1310 nm
transmitter and 1550 nm receiver. The transmitter section
uses a multiple quantum well laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated 1550
nm detector preamplifier (IDP) mounted in an optical
header and a limiting post-amplifier IC. A PECL logic
interface simplifies interface to external circuitry.
Single Fiber Bi-Directional MM Transceiver
1310 nm LD Transmitter
1550 nm Receiver
Link distance 0 to 500 m
Industry Standard 1 x 9 Footprint
Single +3.3 V Power Supply
RoHS Compliant
0 to 70oC Operating : BTR-7600MG
-20 to 85oC Operating : BTR-7600AMG
LVPECL Differential Inputs and Outputs
LVPECL Signal Detect Output: BTR-7600MG
LVTTL Signal Detect Output: TR-7600CMG
Wave Solderable and Aqueous Washable
Class 1 Laser International Safety Standard IEC-60825
Compliant
APPLICATIONS
LASER SAFETY
This multi-mode mode transceiver is a Class 1 laser product.
It complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
l WDM 1.25 Gb/s Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 1.063 Gb/s Links
ORDER INFORMATION
P/No.
Bit Rate Distance
(Gb/s)
(m)
BTR-7600MG
BTR-7600AMG
1.25
1.25
0 to 500
0 to 500
TX
(nm)
RX
(nm)
Voltage
(V)
Package
Temp
(oC)
1310
1310
1550
1550
3.3
3.3
1X9 SC
1X9 SC
0 to 70
-20 to 85
TX
RX Sens. RoHS
Power
(dBm) Compliant
(dBm)
-4 to -10
-17
Yes
-4 to -10
-17
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Topr
Soldering Temperature
Power Supply Voltage
Input Voltage
--Vcc
---
Output Current
Iout
Min
-40
0
-20
Units
o
C
o
C
0
GND
Max
85
70
85
260
4.5
Vcc
0
30
mA
Min
3.13
0
-20
Typ
3.3
Max
3.47
70
85
1300
240
o
C
V
V
Notes
BTR-7600MG
BTR-7600AMG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Vcc
Topr
Data Rate
Power Supply Current
Icc
1250
Units
V
o
C / BTR-7600MG
o
C / BTR-7600AMG
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V2.0
Optoway
BTR-7600MG
2
***********************************************************************************************************************************************************************
Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Total Jitter
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Symbol
Min
Po
-10
1260
λ
--∆λ
ER
9.0
Compliant with IEEE 802.3z
tr
tf
RIN
TJ
IIL
IIH
VIH - VIL
VIL - VCC
VIH - VCC
Typ
Max
Units
Notes
---
-4
1360
4
---
dBm
nm
nm
dB
1
0.26
0.26
-120
0.227
ns
ns
dB/Hz
ns
-----
20% to 80% Values
20% to 80% Values
2
µA
µA
mV
V
V
-350
350
300
-2.0
-1.1
RMS (σ)
-1.58
-0.74
3
3
Notes: 1. Output power is power coupled into a 62.5/125 µm multi-mode fiber.
2. Measured with a 27-1 PRBS.
3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3. 47V)
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Optical Return Loss
Electrical
Data Output Voltage – Low
Data Output Voltage – High
SD Output Voltage -- Low
SD Output Voltage -- High
SD Output Voltage -- Low
SD Output Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
--Pin
Pa
Pd
---
-17
---17
---
dBm
dBm
dBm
dBm
dB
nm
dB
1
ORL
---3
---30
1.0
1480
14
V OL - VCC
V OH - VCC
V OL - VCC
V OH - VCC
VOL
V OH
-2.0
-1.1
-2.0
-1.1
0
2.0
-------
1580
-1.58
-0.74
-1.58
-0.74
0.8
Vcc+0.3
V
V
V
V
V
V
Transition: low to high
Transition: high to low
2
3
3
BTR-7600MG
BTR-7600CMG
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS.
2. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm.
3. These outputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V2.0
Optoway
BTR-7600MG
3
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
Receiver Signal Ground 1 (Rx GND)
Receiver Data Out 2 (RD+)
Receiver Data Out Bar 3 (RD−)
Signal Detect 4 (SD)
Receiver Power Supply 5 (Rx Vcc)
Transmitter Power Supply 6 (Tx Vcc)
Transmitter Data In Bar 7 (TD−)
Transmitter Data In 8 (TD+)
Transmitter Signal Ground 9 (Tx GND)
PIN
1
2
3
4
5
6
7
8
9
Symbol
Rx GND
RD+
RD−
SD
Rx Vcc
Tx Vcc
TD−
TD+
Tx GND
N/C
TOP VIEW
N/C
Notes
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
See recommended circuit schematic
Active high on this indicates a received optical signal
+3.3V dc power for the receiver section
+3.3V dc power for the transmitter section
See recommended circuit schematic
See recommended circuit schematic
Directly connect this plan to the trransmitter ground plane
RECOMMENDED CIRCUIT SCHEMATIC
Vcc3.3V
Vcc3.3V
Vcc3.3V
R2
NA
R3
NA
R1
NA
R4
NA
C9
MICROSTRIP5
100nF
C10
Z=50R
MICROSTRIP6
100nF
Z=5OR
TDLVPECL
TD+
L2
Vcc3.3V
1uH
U2
9
8
7
6
5
4
3
2
1
TXGND
TD+
TDTXVCC
RXVCC
SD
RDRD+
RXGND
BTR-77XX(C)/76XX(C)
C2
C3
100nF
100nF
C4
10uF
L1
PHY DEVICE
1uH
C1
C8
100nF
10uF
Vcc3.3V
RD+
R21
1K
C12
MICROSTRIP7
100nF
Z=50R
MICROSTRIP8
R14
100R
LVPECL
RD-
C11 100nF Z=5OR
SD / LVPECL
The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power
supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx
Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V2.0
Optoway
BTR-7600MG
4
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2005 V2.0
Similar pages