Rohm BU4081FV High voltage cmos logic ics gate> Datasheet

General-purpose CMOS Logic IC Series (BU4S,BU4000B Series)
High Voltage CMOS Logic ICs
<Logic Gate>
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
No.09050EAT03
●Description
BU4001B series ICs are 2-input positive logic NOR gates, each with four built-in circuits. A buffer achieved by an inverter
added at the gate output improves the input / output propagation characteristics and minimizes variation in the propagation
time caused by an increase in the load capacitance. BU4011B series ICs are 2-input positive logic NAND gates. Four
circuits are contained on a single chip. An inverter-based buffer is included at the gate output, enabling improved input /
output propagation characteristics, and an increased load capacitance minimizes fluctuations in the propagation time.
BU4030B and BU4070B series ICs are exclusive OR gates, each with four built-in circuits. An inverter-based buffer was
incorporated at the gate output for enhanced I/O voltage characteristics, and the load capacitance has been increased in
order to minimize fluctuations in the propagation time. BU4081B series are 2-input positive logic AND gates with four circuits
mounted on a single chip. An inverter-type buffer was added to the gate output, improving input/output transmission speed,
and an increased load capacitance suppresses fluctuations in the transmission time. BU4093B series ICs are 4-circuit,
2-input NAND gates whose input pins all have a Schmitt trigger function. BU4069UB series ICs are 6-circuit inverters with no
buffers. A single-stage gate configuration reduces propagation time. BU4584B series ICs are inverter-type Schmitt trigger
circuits, each incorporating 6 circuits in a single chip.
●Features
1) Low power consumption
2) Broad operating supply voltage range: 3V to 16V
3) High input impedance
4) High fan out
5) L-TTL2 and LS-TTL1 inputs can be directly driven
6) All outputs are equipped with buffers (except for BU4069UB)
●Applications
These products are suitable for applications requiring low power consumption and a high degree of noise tolerance
The BU4030B/BU4070B series can be used in digital comparators and parity circuits
The BU4093B series are suitable as line receivers, waveform shaping and multi-vibrators, etc.
The BU4584B series can be used in waveform shaping circuits for inputs with a slow rise time and fall time
●Lineup
High Voltage CMOS Logic
Logic Gate
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
4
circuits
NOR
gate
BU4001B/
BU4001F
(Quad 2-input NOR gate)
4
circuits
NAND
gate
BU4011B/
BU4011B F/
BU4011B FV
(Quad 2-input NAND gate)
4
circuits
EXOR
gate
BU4030B/
BU4030B F
(Quad exclusive OR gate)
4
circuits
EXOR
gate
BU4070B/
BU4070B F
(Quad exclusive OR gate)
4
circuits
AND
gate
4
circuits
NAND
gate
6
circuits
INV
gate
6
circuits
INV
gate
BU4081B/
BU4081F/
BU4081FV
BU4093B/
BU4093B F/
BU4093B FV
BU4069UB/
BU4069UB F/
BU4069UB FV
BU4584B/
BU4584BF/
BU4584BFV
1 / 21
6
(Quad 2-input AND gate)
(Quad 2-input NAND Schmitt trigger)
(Hex inverter)
(Hex Schmitt trigger inverter)
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Absolute Maximum Ratings
Limit
Parameter
Symbol
Power Supply Voltage
Unit
BU4030B
BU4081B BU4093B BU4069UB BU4584B
/BU4070B
-0.3 to 18
V
BU4001B BU4011B
VDD
Supply current
Iin
±10
mA
Operating temperature
Topr
-40 to 85
℃
Storage temperature
Tstg
-55 to 150
℃
VIN
Tjmax
-0.3 to VDD+0.3
150
V
℃
Input Voltage
Maximum junction temperature
●Recommended Operating Conditions
Limit
Parameter
Symbol
Operating Power Supply
VDD
Input Voltage
VIN
BU4001B BU4011B
Unit
BU4030B
BU4081B BU4093B BU4069UB BU4584B
/BU4070B
3 to 16
V
0 to VDD
V
●Thermal Derating Curve
Power dissipation Pd [mW]
1400
1180[mV] BU4***
(*1)
870[mV] BU4***FV (*2)
1200
610[mV] BU4***F
1000
(*3)
(*)shows BU4*** below
BU4001B
BU4011B
BU4030B
BU4070B
BU4081B
BU4093B
BU4069UB
BU4584B
800
600
400
(*1)
9.5
200
0
25
50
75 85℃100
125
150
175
Ambient temperature Ta [℃]
(*2)
7.0
(*3)
4.9
UNIT
mW/℃
When used at Ta=25[°C] or above, values of above are reduced per 1[°C].
Allowable loss is the value for mounting 70[mm] x 70[mm] x 1.6[mm] FR4 glass epoxy
circuit board (copper foil area is 3% or less).
●Input / Output Equivalent Circuits
VDD
VDD
VDD
VDD
GND
GND
GND
GND
<Input>
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
<Output>
2 / 21
6
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
DC Characteristics
●Electrical Characteristics(BU4001B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF)
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
3.5
-
-
5
Input “H” voltage
VIH
7.0
-
-
V
10
11.0
-
-
15
-
-
1.5
5
Input “L” voltage
VIL
-
-
3.0
V
10
-
-
4.0
15
Input “H” current
IIH
-
-
0.3
μA
15
Input “L” current
IIL
-
-
-0.3
μA
15
4.95
-
-
5
Output “H” voltage
VOH
9.95
-
-
V
10
14.95
-
-
15
-
-
0.05
5
Output “L” voltage
VOL
-
-
0.05
V
10
-
-
0.05
15
-0.16
-
-
5
Output “H” current
IOH
-0.4
-
-
mA
10
-1.2
-
-
15
0.44
-
-
5
Output “L” current
IOL
1.1
-
-
mA
10
3.0
-
-
15
-
-
1
5
Static supply current
IDD
-
-
2
μA
10
-
-
4
15
Switching Characteristics
Parameter
Symbol
Output rising time
tTLH
Output falling time
tTHL
“L” to ”H”
Propagation delay time
tPLH
“H” to ”L”
Propagation delay time
tPHL
Input capacitance
CIN
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
MIN
-
-
-
-
-
-
-
-
-
-
-
-
-
Standard Value
TYP
MAX
180
-
90
-
65
-
100
-
50
-
40
-
90
-
50
-
40
-
90
-
50
-
40
-
5
-
3 / 21
6
Unit
ns
ns
ns
ns
pF
VDD[V]
5
10
15
5
10
15
5
10
15
5
10
15
-
Condition
-
-
VIH=15[V]
VIL=0[V]
IO=0[mA]
IO=0[mA]
VOH=4.6[V]
VOH=9.5[V]
VOH=13.5[V]
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
VI=VDD or GND
Fig.No
1
2
3
1
2
3
-
-
1
2
3
1
2
3
4
5
-
Condition
Fig.No
-
6
-
7
-
8
-
9
-
-
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
DC Characteristics
●Electrical Characteristics(BU4011B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF)
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
3.5
-
-
5
Input “H” voltage
VIH
7.0
-
-
V
10
11.0
-
-
15
-
-
1.5
5
Input “L” voltage
VIL
-
-
3.0
V
10
-
-
4.0
15
Input “H” current
IIH
-
-
0.3
μA
15
Input “L” current
IIL
-
-
-0.3
μA
15
4.95
-
-
5
Output “H” voltage
VOH
9.95
-
-
V
10
14.95
-
-
15
-
-
0.05
5
Output “L” voltage
VOL
-
-
0.05
V
10
-
-
0.05
15
-0.16
-
-
5
Output “H” current
IOH
-0.4
-
-
mA
10
-1.2
-
-
15
0.44
-
-
5
Output “L” current
IOL
1.1
-
-
mA
10
3.0
-
-
15
-
-
1
5
Static supply current
IDD
-
-
2
μA
10
-
-
4
15
Switching Characteristics
Parameter
Symbol
Output rising time
tTLH
Output falling time
tTHL
“L” to ”H”
Propagation delay time
tPLH
“H” to ”L”
Propagation delay time
tPHL
Input capacitance
CIN
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
MIN
-
-
-
-
-
-
-
-
-
-
-
-
-
Standard Value
TYP
MAX
180
-
90
-
65
-
100
-
50
-
40
-
90
-
50
-
40
-
90
-
50
-
40
-
5
-
4 / 21
6
Unit
ns
ns
ns
ns
pF
VDD[V]
5
10
15
5
10
15
5
10
15
5
10
15
-
Condition
-
-
VIH=15[V]
VIL=0[V]
IO=0[mA]
IO=0[mA]
VOH=4.6[V]
VOH=9.5[V]
VOH=13.5[V]
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
VI=VDD or GND
Fig.No
10
11
12
10
11
12
-
-
10
11
12
10
11
12
13
14
-
Condition
Fig.No
-
15
-
16
-
17
-
18
-
-
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
DC Characteristics
●Electrical Characteristics(BU4030B/ BU4070B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF)
Standard Value
Parameter
Symbol
Unit
Condition
MIN
TYP
MAX
VDD[V]
3.5
-
-
5
Input “H” voltage
VIH
7.0
-
-
V
10
-
11.0
-
-
15
-
-
1.5
5
Input “L” voltage
VIL
-
-
3.0
V
10
-
-
-
4.0
15
Input “H” current
IIH
-
-
0.3
μA
15
VIH=15[V]
Input “L” current
IIL
-
-
-0.3
μA
15
VIL=0[V]
4.95
-
-
5
Output “H” voltage
VOH
9.95
-
-
V
10
IO=0[mA]
14.95
-
-
15
-
-
0.05
5
Output “L” voltage
VOL
-
-
0.05
V
10
IO=0[mA]
-
-
0.05
15
-0.16
-
-
5
VOH=4.6[V]
Output “H” current
IOH
-0.4
-
-
mA
10
VOH=9.5[V]
-1.2
-
-
15
VOH=13.5[V]
0.44
-
-
5
VOL=0.4[V]
Output “L” current
IOL
1.1
-
-
mA
10
VOL=0.5[V]
3.0
-
-
15
VOL=1.5[V]
-
-
1
5
Static supply current
IDD
-
-
2
μA
10
VI=VDD or GND
-
-
4
15
Switching Characteristics
Parameter
Symbol
Output rising time
tTLH
Output falling time
tTHL
“L” to ”H”
Propagation delay time
tPLH
“H” to ”L”
Propagation delay time
tPHL
Input capacitance
CIN
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
MIN
-
-
-
-
-
-
-
-
-
-
-
-
-
Standard Value
TYP
MAX
180
-
90
-
65
-
100
-
50
-
40
-
90
-
50
-
40
-
90
-
50
-
40
-
5
-
5 / 21
6
Unit
ns
ns
ns
ns
pF
VDD[V]
5
10
15
5
10
15
5
10
15
5
10
15
-
Fig.No
19
20
21
19
20
21
-
-
19
20
21
19
20
21
22
23
-
Condition
Fig.No
-
24
-
25
-
26
-
27
-
-
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
DC Characteristics
●Electrical Characteristics(BU4081B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF)
Standard Value
Parameter
Symbol
Unit
Condition
MIN
TYP
MAX
VDD[V]
3.5
-
-
5
Input “H” voltage
VIH
7.0
-
-
V
10
-
11.0
-
-
15
-
-
1.5
5
Input “L” voltage
VIL
-
-
3.0
V
10
-
-
-
4.0
15
Input “H” current
IIH
-
-
0.3
μA
15
VIH=15[V]
Input “L” current
IIL
-
-
-0.3
μA
15
VIL=0[V]
4.95
-
-
5
Output “H” voltage
VOH
9.95
-
-
V
10
IO=0[mA]
14.95
-
-
15
-
-
0.05
5
Output “L” voltage
VOL
-
-
0.05
V
10
IO=0[mA]
-
-
0.05
15
-0.16
-
-
5
VOH=4.6[V]
Output “H” current
IOH
-0.4
-
-
mA
10
VOH=9.5[V]
-1.2
-
-
15
VOH=13.5[V]
0.44
-
-
5
VOL=0.4[V]
Output “L” current
IOL
1.1
-
-
mA
10
VOL=0.5[V]
3.0
-
-
15
VOL=1.5[V]
-
-
1
5
Static supply current
IDD
-
-
2
μA
10
VI=VDD or GND
-
-
4
15
Switching Characteristics
Parameter
Symbol
Output rising time
tTLH
Output falling time
tTHL
“L” to ”H”
Propagation delay time
tPLH
“H” to ”L”
Propagation delay time
tPHL
Input capacitance
CIN
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
MIN
-
-
-
-
-
-
-
-
-
-
-
-
-
Standard Value
TYP
MAX
180
-
90
-
65
-
100
-
50
-
40
-
160
-
65
-
50
-
160
-
65
-
50
-
5
-
6 / 21
6
Unit
ns
ns
ns
ns
pF
VDD[V]
5
10
15
5
10
15
5
10
15
5
10
15
-
Fig.No
28
29
30
28
29
30
-
-
28
29
30
28
29
30
31
32
-
Condition
Fig.No
-
33
-
34
-
35
-
36
-
-
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
DC Characteristics
●Electrical Characteristics(BU4093B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF)
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
3.5
-
-
5
Input “H” voltage
VIH
7.0
-
-
V
10
11.0
-
-
15
-
-
1.5
5
Input “L” voltage
VIL
-
-
3.0
V
10
-
-
4.0
15
Input “H” current
IIH
-
-
0.3
μA
15
Input “L” current
IIL
-
-
-0.3
μA
15
4.95
-
-
5
Output “H” voltage
VOH
9.95
-
-
V
10
14.95
-
-
15
-
-
0.05
5
Output “L” voltage
VOL
-
-
0.05
V
10
-
-
0.05
15
-0.44
-
-
5
Output “H” current
IOH
-1.1
-
-
mA
10
-3.0
-
-
15
0.44
-
-
5
Output “L” current
IOL
1.1
-
-
mA
10
3.0
-
-
15
-
-
1
5
Static supply current
IDD
-
-
2
μA
10
-
-
4
15
0.17
-
0.39
5
Hysteresis voltage
VH
0.25
-
0.60
μA
10
0.33
-
0.90
15
Switching Characteristics
Parameter
Symbol
Output rising time
tTLH
Output falling time
tTHL
“L” to ”H”
Propagation delay time
tPLH
“H” to ”L”
Propagation delay time
tPHL
Input capacitance
CIN
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
Standard Value
MIN
TYP
MAX
-
100
-
-
50
-
-
40
-
-
100
-
-
50
-
-
40
-
-
125
-
-
50
-
-
40
-
-
125
-
-
50
-
-
40
-
-
5
-
7 / 21
6
Unit
ns
ns
ns
ns
pF
VDD[V]
5
10
15
5
10
15
5
10
15
5
10
15
-
Condition
-
-
VIH=15[V]
VIL=0[V]
IO=0[mA]
IO=0[mA]
VOH=4.6[V]
VOH=9.5[V]
VOH=13.5[V]
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
VI=VDD or GND
Fig.No
37
38
39
37
38
39
-
-
37
38
39
37
38
39
40
41
-
-
-
Condition
Fig.No
-
42
-
43
-
44
-
45
-
-
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
DC Characteristics
●Electrical Characteristics(BU4069UB)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF)
Standard Value
Parameter
Symbol
Unit
Condition
MIN
TYP
MAX
VDD[V]
4.0
-
5
Input “H” voltage
VIH
8.0
-
V
10
-
12.5
-
15
-
-
1.0
5
Input “L” voltage
VIL
-
-
2.0
V
10
-
-
-
2.5
15
Input “H” current
IIH
-
-
0.3
μA
15
VIH=15[V]
Input “L” current
IIL
-
-
-0.3
μA
15
VIL=0[V]
4.95
-
-
5
Output “H” voltage
VOH
9.95
-
-
V
10
IO=0[mA]
14.95
-
-
15
-
-
0.05
5
Output “L” voltage
VOL
-
-
0.05
V
10
IO=0[mA]
-
-
0.05
15
-0.44
-
5
VOH=4.6[V]
Output “H” current
IOH
-1.1
-
mA
10
VOH=9.5[V]
-3.0
-
15
VOH=13.5[V]
0.44
-
5
VOL=0.4[V]
Output “L” current
IOL
1.1
-
mA
10
VOL=0.5[V]
3.0
-
15
VOL=1.5[V]
-
-
1
5
Static supply current
IDD
-
-
2
μA
10
VI=VDD or GND
-
-
4
15
Switching Characteristics
Parameter
Symbol
Output rising time
tTLH
Output falling time
tTHL
“L” to ”H”
Propagation delay time
tPLH
“H” to ”L”
Propagation delay time
tPHL
Input capacitance
CIN
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
MIN
-
-
-
-
-
-
-
-
-
-
-
-
-
Standard Value
TYP
MAX
180
-
90
-
65
-
100
-
50
-
40
-
90
-
50
-
40
-
65
-
40
-
30
-
5
-
8 / 21
6
Unit
ns
ns
ns
ns
pF
VDD[V]
5
10
15
5
10
15
5
10
15
5
10
15
-
Fig.No
46
47
48
46
47
48
-
-
46
47
48
46
47
48
49
50
-
Condition
Fig.No
-
51
-
52
-
53
-
54
-
-
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
DC Characteristics
●Electrical Characteristics(BU4584B)(Unless otherwise noted, VSS=0V, Ta=25℃, CL=50pF)
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
3.5
-
-
5
Input “H” voltage
VIH
7.0
-
-
V
10
11.0
-
-
15
-
-
1.5
5
Input “L” voltage
VIL
-
-
3.0
V
10
-
-
4.0
15
Input “H” current
IIH
-
-
0.3
μA
15
Input “L” current
IIL
-
-
-0.3
μA
15
4.95
-
-
5
Output “H” voltage
VOH
9.95
-
-
V
10
14.95
-
-
15
-
-
0.05
5
Output “L” voltage
VOL
-
-
0.05
V
10
-
-
0.05
15
-0.44
-
-
5
Output “H” current
IOH
-1.1
-
-
mA
10
-3.0
-
-
15
0.44
-
-
5
Output “L” current
IOL
1.1
-
-
mA
10
3.0
-
-
15
-
-
1
5
Static supply current
IDD
-
-
2
μA
10
-
-
4
15
0.15
-
0.6
5
Hysteresis voltage
VH
0.25
-
1.0
μA
10
0.40
-
1.5
15
Input capacitance
CIN
-
5
-
pF
-
Switching Characteristics
Parameter
Symbol
Output rising time
tTLH
Output falling time
tTHL
“L” to ”H”
Propagation delay time
tPLH
“H” to ”L”
Propagation delay time
tPHL
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
MIN
-
-
-
-
-
-
-
-
-
-
-
-
Standard Value
TYP
MAX
100
-
50
-
40
-
100
-
50
-
40
-
125
-
60
-
50
-
125
-
60
-
50
-
9 / 21
6
Unit
ns
ns
ns
ns
VDD[V]
5
10
15
5
10
15
5
10
15
5
10
15
Condition
-
-
VIH=15[V]
VIL=0[V]
IO=0[mA]
IO=0[mA]
VOH=4.6[V]
VOH=9.5[V]
VOH=13.5[V]
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
Fig.No
55
56
57
55
56
57
-
-
55
56
57
55
56
57
58
59
-
-
-
-
-
-
Condition
Fig.No
-
60
-
61
-
62
-
63
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Switching Characteristics
20[ns
]
20[ns
]
90%
50%
Inpu
t
10%
①tPHL
②tPLH
90%
Output
Description of Symbols
(1) tPHL: Time up to 50% of rise time of input waveform
~ 50% of fall time of output waveform
(2) tPLH: Time up to 50% of fall time of input waveform
~ 50% of rise time of output waveform
(3) tTHL: Time up to 90% ~ 10% of fall time of output waveform
(4) tTLH: Time up to 10% ~ 90% of rise time of output waveform
50%
10%
④tTLH
③tTHL
20[ns
]
20[ns
]
90%
50%
Inpu
t
10%
②tpHL
①tpLH
90%
Description of Symbols
(1) tPLH: Time up to 50% of rise time of input waveform
~50% of rise time of output waveform
(2) tPHL: Time up to 50% of fall time of input waveform
~ 50% of fall time of output waveform
(3) tTLH: Time up to 10% ~ 90% of rise time of output waveform
(4) tTHL: Time up to 90% ~ 10% of fall time of output waveform
50%
Outpu
t
10%
③tTLH
④tTHL
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
10 / 21
6
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Electrical Characteristics Curves(BU4001B)
6
20
12
[BU4001B/F]
[BU4001B/F]
10
25[℃]
-40[℃]
4
3
2
85[℃]
25[℃]
-40[℃]
85[℃]
15
Output Voltage [V]
85[℃]
Output Voltage [V]
Output Voltage [V]
5
[BU4001B/F]
8
6
4
25[℃]
-40[℃]
10
5
1
2
0
0
0
1
2
3
4
0
5
0
2
4
Input Voltage [V]
8
0
5
10
15
Input Voltage [V]
Fig.1
Fig.2
Fig.3
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
Output voltage-Input voltage characteristics
(VDD=10[V] / VSS=0[V])
Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
85[℃]
20
VDD=5[V]
-40[℃]
25[℃]
10
40
30
20
-40[℃]
25[℃] VDD=10[V]
85[℃]
10
0
0
5
10
15
0
20
5
10
15
Fig.4
Output source current-voltage characteristics
450
Propagation Delay Time [ns]
350
VDD=3[V]
250
200
VDD=5[V]
VDD=10[V]
20
25
50
-25
0
25
75
100
Ambient Temperature [℃]
Fig.7
Falling time tTHL
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
50
75
400
[BU4001B/F]
[BU4001B/F]
350
Operating Temperature Range
300
250
100
Ambient Temperature [℃]
VDD=3[V]
200
150
VDD=5[V]
100
VDD=10[V]
Operating Temperature Range
300
VDD=3[V]
250
200
150
VDD=5[V]
100
VDD=10[V]
50
VDD=18[V]
0
0
VDD=18[V]
-50
VDD=18[V]
0
-25
VDD=10[V]
Fig.6
VDD=18[V]
-50
VDD=5[V]
100
0
50
50
VDD=3[V]
150
Rising time tTLH
350
Operating Temperature Range
100
200
Fig.5
400
150
250
Output sink current-voltage characteristics
[BU4001B/F]
300
300
Output Voltage [V]
Output Voltage [V]
400
Operating Temperature Range
50
-40[℃]
25[℃] VDD=5[V]
85[℃]
Propagation Delay Time [ns]
30
VDD=15[V]
-40[℃]
25[℃]
85[℃]
Output Rise Time [ns]
VDD=10[V]
-40[℃]
25[℃]
0
[BU4001B/F]
[BU4001B/F]
350
Output Sink Current [mA]
40
400
50
[BU4001B/F]
VDD=15[V]
-40[℃]
25[℃]
85[℃]
85[℃]
Output Fall Time [ns]
10
Input Voltage [V]
50
Output Source Current [mA]
6
0
-50
-25
0
25
50
75
Ambient Temperature [℃]
100
-50
-25
0
25
50
75
Fig.8
Fig.9
Rising propagation delay tPLH
Falling propagation delay tPHL
11 / 21
6
100
Ambient Temperature [℃]
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Electrical Characteristics Curves(BU4011B)
6
20
[BU4011B/F/FV]
[BU4011B/F/FV]
10
5
4
25[℃]
15
-40[℃]
3
2
85[℃]
25[℃]
Output Voltage [V]
85[℃]
Output Voltage [V]
Output Voltage [V]
[BU4011B/F/FV]
-40[℃]
5
85[℃]
25[℃]
-40[℃]
10
5
1
0
0
0
1
2
3
4
0
0
5
2
4
10
0
5
10
15
Input Voltage [V]
Fig.10
Fig.11
Fig.12
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
Output voltage-Input voltage characteristics
(VDD=10[V] / VSS=0[V])
Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
VDD=10[V]
-40[℃]
25[℃]
30
85[℃]
20
VDD=5[V]
-40[℃]
25[℃]
10
VDD=15[V]
-40[℃]
25[℃]
85[℃]
40
20
-40[℃]
25[℃] VDD=10[V]
85[℃]
10
5
10
15
20
0
5
Output Voltage [V]
10
Fig.13
VDD=3[V]
200
VDD=5[V]
100
VDD=10[V]
VDD=18[V]
0
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Propagation Delay Time [ns]
Operating Temperature Range
300
200
VDD=3[V]
VDD=5[V]
VDD=10[V]
VDD=18[V]
0
20
-50
25
50
Fig.14
Fig.15
Rising time tTLH
500
[BU4011B/F/FV]
Operating Temperature Range
400
300
VDD=3[V]
200
VDD=5[V]
100
VDD=18[V]
0
-50
-25
0
25
50
75
Ambient Temperature [℃]
Fig.17
Rising propagation delay tPLH
12 / 21
6
75
100
[BU4011B/F/FV]
Operating Temperature Range
400
VDD=3[V]
300
200
VDD=5[V]
100
VDD=10[V]
VDD=10[V]
Fig.16
www.rohm.com
0
Ambient Temperature [℃]
Falling time tTHL
© 2009 ROHM Co., Ltd. All rights reserved.
-25
Output sink current-voltage characteristics
500
[BU4011B/F/FV]
400
15
300
Output Voltage [V]
Output source current-voltage characteristics
500
Operating Temperature Range
100
-40[℃]
25[℃] VDD=5[V]
85[℃]
0
0
[BU4011B/F/FV]
400
30
85[℃]
0
500
[BU4011B/F/FV]
Output Rise Time [ns]
40
50
[BU4011B/F/FV]
Propagation Delay Time [ns]
VDD=15[V]
-40[℃]
25[℃]
85[℃]
Output Sink Current [mA]
50
Output Source Current [mA]
8
Input Voltage [V]
Input Voltage [V]
Output Fall Time [ns]
6
VDD=18[V]
0
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.18
Falling propagation delay tPHL
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Electrical Characteristics Curves(BU4030B / BU4070B)
[BU4070B/F]
85[℃]
4
25[℃]
20
[BU4030B/F]
[BU4030B/F]
[BU4070B/F]
10
[BU4070B/F]
15
-40[℃]
Output Voltage [V]
5
Output Voltage [V]
12
[BU4030B/F]
3
2
8
85[℃]
25[℃]
Output Voltage [V]
6
-40[℃]
6
4
85[℃]
25[℃]
-40[℃]
10
5
1
2
0
0
0
1
2
3
4
0
5
0
5
5
10
15
Input Voltage [V]
Fig.19
Fig.20
Fig.21
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
Output voltage-Input voltage characteristics
(VDD=10[V] / VSS=0[V])
Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
50
50
400
VDD=10[V]
-40[℃]
25[℃]
30
85[℃]
20
VDD=5[V]
-40[℃]
25[℃]
10
0
VDD=15[V]
-40[℃]
25[℃]
85[℃]
40
20
-40[℃]
25[℃] VDD=10[V]
85[℃]
10
5
10
15
20
[BU4070B/F]
Operating Temperature Range
30
0
5
Output Voltage [V]
10
300
200
VDD=3[V]
VDD=5[V]
100
VDD=10[V]
-40[℃]
25[℃] VDD=5[V]
85[℃]
0
0
[BU4030B/F]
[BU4070B/F]
[BU4070B/F]
Output Rise Time [ns]
40
[BU4030B/F]
[BU4030B/F]
VDD=15[V]
-40[℃]
25[℃]
85[℃]
85[℃]
VDD=18[V]
0
15
-50
20
-25
0
25
50
Fig.22
Fig.23
Fig.24
Output sink current-voltage characteristics
Rising time tTLH
VDD=3[V]
300
200
VDD=5[V]
100
VDD=10[V]
VDD=18[V]
0
-50
-25
0
25
50
75
500
[BU4070B/F]
Operating Temperature Range
300
VDD=3[V]
200
VDD=5[V]
100
VDD=10[V]
VDD=18[V]
0
100
Ambient Temperature [℃]
Fig.25
Falling time tTHL
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
-50
-25
0
25
50
Fig.26
Rising propagation delay tPLH
6
400
VDD=3[V]
300
200
VDD=5[V]
100
VDD=10[V]
VDD=18[V]
0
75
Ambient Temperature [℃]
13 / 21
100
[BU4030B/F]
[BU4070B/F]
Operating Temperature Range
[BU4030B/F]
Propagation Delay Time [ns]
400
400
Propagation Delay Time [ns]
[BU4030B/F]
[BU4070B/F]
Operating Temperature Range
75
Ambient Temperature [℃]
Output Voltage [V]
Output source current-voltage characteristics
500
Output Fall Time [ns]
0
Input Voltage [V]
Output Sink Current [mA]
Output Source Current [mA]
Input Voltage [V]
10
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.27
Falling propagation delay tPHL
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Electrical Characteristics Curves(BU4081B)
6
12
[BU4081B/F/FV]
85[℃]
5
20
[BU4081B/F/FV]
85[℃]
25[℃] -40[℃]
25[℃]
[BU4081B/F/FV]
-40[℃]
85[℃]
10
25[℃]
-40[℃]
3
2
Output Voltage [V]
Output Voltage [V]
Output Voltage [V]
15
4
8
6
4
10
5
1
2
0
0
0
0
1
2
3
4
5
0
2
4
Input Voltage [V]
8
0
10
5
10
Fig.28
Fig.29
Fig.30
Output voltage-Input voltage characteristics
(VDD=10[V] / VSS=0[V])
Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
30
VDD=10[V]
-40[℃]
25[℃]
20
VDD=5[V]
-40[℃]
25[℃]
10
0
40
10
15
Operating Temperature Range
-40[℃]
25[℃]
85[℃]
30
20
-40[℃]
25[℃] VDD=10[V]
85[℃]
10
-40[℃]
25[℃] VDD=5[V]
85[℃]
0
5
[BU4081B/F/FV]
VDD=15[V]
85[℃]
0
200
[BU4081B/F/FV]
Output Rise Time [ns]
40
50
[BU4081B/F/FV]
Output Sink Current [mA]
VDD=15[V]
-40[℃]
25[℃]
85[℃]
85[℃]
20
0
5
Output Voltage [V]
10
15
150
100
VDD=3[V]
50
VDD=5[V]
VDD=10[V]
VDD=18[V]
0
-50
20
-25
0
25
50
Fig.31
Fig.32
Fig.33
Output sink current-voltage characteristics
Rising time tTLH
200
[BU4081B/F/FV]
Propagation Delay Time [ns]
Operating Temperature Range
VDD=3[V]
100
VDD=5[V]
VDD=10[V]
-50
-25
0
25
50
75
100
VDD=5[V]
50
VDD=10[V]
Operating Temperature Range
200
VDD=3[V]
150
100
VDD=5[V]
50
VDD=10[V]
VDD=18[V]
VDD=18[V]
0
VDD=3[V]
150
VDD=18[V]
0
100
Ambient Temperature [℃]
Fig.34
Falling time tTHL
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
100
[BU4081B/F/FV]
Operating Temperature Range
150
50
250
[BU4081B/F/FV]
Propagation Delay Time [ns]
200
75
Ambient Temperature [℃]
Output Voltage [V]
Output source current-voltage characteristics
Output Fall Time [ns]
15
Input Voltage [V]
Input Voltage [V]
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
50
Output Source Current [mA]
6
0
-50
-25
0
25
50
75
Ambient Temperature [℃]
Fig.35
Rising propagation delay tPLH
14 / 21
6
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.36
Falling propagation delay tPHL
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Electrical Characteristics Curves(BU4093B)
6
12
[BU4093B/F/FV]
[BU4093B/F/FV]
10
25[℃]
85[℃]
85[℃]
-40[℃]
4
3
2
25[℃]
25[℃]
-40[℃]
15
-40[℃]
Output Voltage [V]
85[℃]
Output Voltage [V]
Output Voltage [V]
5
20
[BU4093B/F/FV]
8
6
4
10
5
1
2
0
0
0
0
1
2
3
4
5
0
5
Input Voltage [V]
0
10
15
Fig.37
Fig.38
Fig.39
Output voltage-Input voltage characteristics
(VDD=10[V] / VSS=0[V])
Output voltage-Input voltage characteristics
50
50
400
[BU4093B/F/FV]
(VDD=15[V] / VSS=0[V])
[BU4093B/F/FV]
[BU4093B/F/FV]
40
30
350
VDD=10[V]
-40[℃]
25[℃]
85[℃]
20
VDD=5[V]
-40[℃]
25[℃]
85[℃]
10
40
VDD=15[V]
-40[℃]
25[℃]
85[℃]
30
20
VDD=10[V]
-40[℃]
25[℃]
85[℃]
10
-40[℃]
25[℃]
VDD=5[V]
85[℃]
0
0
0
5
10
15
Output Rise Time[ns]
-40[℃]
25[℃]
85[℃]
Output Source Current [mA]
0
20
5
10
Operating Temperature Range
300
250
200
VDD=3[V]
150
VDD=5[V]
VDD=10[V]
100
VDD=18[V]
50
0
15
20
-50
-25
Output Voltage [V]
Output Voltage [V]
0
25
50
Fig.40
Fig.41
Fig.42
Output source current-voltage characteristics
Output sink current-voltage characteristics
Rising time tTLH
400
400
400
Propagation Delay Time [ns]
300
VDD=3[V]
200
VDD=5[V]
100
VDD=10[V]
Operating Temperature Range
300
200
VDD=3[V]
100
VDD=5[V]
0
-25
0
25
50
75
200
VDD=3[V]
100
VDD=5[V]
VDD=10[V]
VDD=18[V]
0
-50
Operating Temperature Range
300
VDD=10[V]
VDD=18[V]
100
Ambient Temperature [℃]
-50
-25
0
25
50
75
Ambient Temperature [℃]
VDD=18[V]
0
100
-50
-25
0
25
50
75
Fig.43
Fig.44
Fig.45
Rising propagation delay tPLH
Falling propagation delay tPHL
www.rohm.com
15 / 21
6
100
Ambient Temperature [℃]
Falling time tTHL
© 2009 ROHM Co., Ltd. All rights reserved.
100
[BU4093B/F/FV]
[BU4093B/F/FV]
[BU4093B/F/FV]
Operating Temperature Range
75
Output Voltage [V]
Propagation Delay Time [ns]
Output Source Current [mA]
10
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
VDD=15[V]
Output Fall Time [ns]
5
Input Voltage [V]
Input Voltage [V]
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Electrical Characteristics Curves(BU4069UB)
5
85[℃]
25[℃]
4
3
2
1
85[℃]
-40[℃]
8
6
4
85[℃]
15
25[℃]
-40[℃]
10
5
0
0
0
1
2
3
4
5
0
2
4
Input Voltage [V]
6
8
0
10
5
10
15
Input Voltage [V]
Input Voltage [V]
Fig.46
Fig.47
Fig.48
Output voltage-Input voltage characteristics
Output voltage-Input voltage characteristics
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
(VDD=10[V] / VSS=0[V])
(VDD=15[V] / VSS=0[V])
50
40
30
VDD=10[V]
-40[℃]
25[℃]
85[℃]
VDD=15[V]
-40[℃]
25[℃]
20
85[℃]
10
40
VDD=15[V]
-40[℃]
30
25[℃]
85[℃]
20
5
10
15
0
20
-40[℃]
25[℃]
85[℃]
5
15
VDD=10[V]
VDD=18[V]
100
20
-50
VDD=3[V]
300
VDD=5[V]
VDD=10[V]
0
25
50
Fig.50
Fig.51
Output sink current-voltage characteristics
Rising time tTLH
75
100
400
[BU4069UB/F/FV]
[BU4069UB/F/FV]
VDD=18[V]
Propagation Delay Time [ns]
400
-25
Ambient Temperature [℃]
400
[BU4069UB/F/FV]
Operating Temperature Range
100
VDD=3[V]
VDD=5[V]
200
0
10
Fig.49
Output source current-voltage characteristics
200
300
Output Voltage [V]
Output Voltage [V]
500
VDD=10[V]
-40[℃]
25[℃]
85[℃]
10
VDD=5[V]
0
[BU4069UB/F/FV]
Operating Temperature Range
0
0
400
[BU4069UB/F/FV]
Output Rise Time [ns]
VDD=5[V]
-40[℃]
25[℃]
85[℃]
Output Sink Current [mA]
[BU4069UB/F/FV]
Operating Temperature Range
Propagation Delay Time [ns]
50
Output Source Current [mA]
25[℃]
[BU4069UB/F/FV]
2
0
Output Fall Time [ns]
20
[BU4069UB/F/FV]
10
-40[℃]
Output Voltage [V]
Output Voltage [V]
12
[BU4069UB/F/FV]
Output Voltage [V]
6
300
VDD=10[V]
200
VDD=18[V]
VDD=3[V]
100
VDD=5[V]
Operating Temperature Range
300
VDD=3[V]
200
VDD=10[V]
VDD=18[V]
VDD=5[V]
100
VDD=18[V]
0
0
0
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.52
Falling time tTHL
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
-50
-25
0
25
50
75
Ambient Temperature [℃]
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.53
Fig.54
Rising propagation delay tPLH
Falling propagation delay tPHL
16 / 21
6
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Electrical Characteristics Curves(BU4584B)
Output Voltage [V]
-40[℃]
3
2
85[℃]
25[℃]
8
15
-40[℃]
6
4
85[℃]
25[℃]
10
-40[℃]
5
2
0
0
1
2
3
4
0
0
5
0
2
4
Input Voltage [V]
6
8
0
10
5
10
Fig.57
Fig.55
Fig.56
Output voltage-Input voltage characteristics
Output voltage-Input voltage characteristics
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
(VDD=10[V] / VSS=0[V] )
(VDD=15[V] / VSS=0[V])
50
50
VDD=5[V]
-40[℃]
25[℃]
85[℃]
40
30
VDD=10[V]
-40[℃]
25[℃]
85[℃]
20
VDD=15[V]
-40[℃]
25[℃]
85[℃]
10
40
VDD=15[V]
-40[℃]
30
25[℃]
85[℃]
20
10
15
VDD=10[V]
-40[℃]
25[℃]
85[℃]
10
-40[℃]
25[℃]
85[℃]
VDD=5[V]
5
[BU4584B/F/FV]
Operating Temperature Range
0
0
400
[BU4584B/F/FV]
Output Sink Current [mA]
[BU4584B/F/FV]
0
0
20
5
Output Voltage [V]
300
200
VDD=3[V]
100
VDD=10[V]
VDD=5[V]
VDD=18[V]
0
10
15
20
-50
Output Voltage [V]
-25
0
25
50
Fig.58
Fig.59
Fig.60
Output sink current-voltage characteristics
Rising time tTLH
400
[BU4584B/F/FV]
Operating Temperature Range
Propagation Delay Time [ns]
400
VDD=3[V]
300
200
VDD=5[V]
100
VDD=10[V]
400
[BU4584B/F/FV]
300
200
VDD=3[V]
100
100
[BU4584B/F/FV]
Operating Temperature Range
Operating Temperature Range
Propagation Delay Time [ns]
500
75
Ambient Temperature [℃]
Output source current-voltage characteristics
Output Fall Time [ns]
15
Input Voltage [V]
Input Voltage [V]
Output Rise Time [ns]
Output Voltage [V]
10
85[℃]
25[℃]
1
Output Source Current [mA]
[BU4584B/F/FV]
[BU4584B/F/FV]
5
4
20
12
[BU4584B/F/FV]
Output Voltage [V]
6
VDD=5[V]
300
VDD=3[V]
200
VDD=5[V]
100
VDD=10[V]
VDD=10[V]
VDD=18[V]
0
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
VDD=18[V]
VDD=18[V]
0
-50
-25
0
25
50
75
Ambient Temperature [℃]
0
100
-50
-25
0
25
50
75
Fig.61
Fig.62
Fig.63
Falling time tTHL
Rising propagation delay tPLH
Falling propagation delay tPHL
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
17 / 21
6
100
Ambient Temperature [℃]
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Pinout Diagrams・Pin Description
1) BU4001B Series
2) BU4011B Series
3) BU4030B Series
A1
1
14
VDD
A1
1
14
VDD
A1
1
14
VDD
B1
2
13
A4
B1
2
13
A4
B1
2
13
A4
O1
3
12
B4
O1
3
12
B4
O1
3
12
B4
O2
4
11
O4
O2
4
11
O4
O2
4
11
O4
B2
5
10
O3
B2
5
10
O3
B2
5
10
O3
A2
6
9
B3
A2
6
9
B3
A2
6
9
B3
VSS
7
8
A3
VSS
7
8
A3
VSS
7
8
A3
PIN No.
PIN NAME
I/O
PIN FUNCTION
PIN No.
PIN NAME
I/O
PIN FUNCTION
PIN No.
PIN NAME
I/O
PIN FUNCTION
1
A1
I
INPUT1
1
A1
I
INPUT1
1
A1
I
INPUT1
2
B1
I
INPUT1
2
B1
I
INPUT1
2
B1
I
INPUT1
3
O1
O
OUTPUT1
3
O1
O
OUTPUT1
3
O1
O
OUTPUT1
4
O2
O
OUTPUT2
4
O2
O
OUTPUT2
4
O2
O
OUTPUT2
5
B2
I
INPUT2
5
B2
I
INPUT2
5
B2
I
INPUT2
6
A2
I
INPUT2
6
A2
I
INPUT2
6
A2
I
INPUT2
7
VSS
―
Power Supply(-)
7
VSS
―
Power Supply(-)
7
VSS
―
Power Supply(-)
8
A3
I
INPUT3
8
A3
I
INPUT3
8
A3
I
INPUT3
9
B3
I
INPUT3
9
B3
I
INPUT3
9
B3
I
INPUT3
10
O3
O
OUTPUT3
10
O3
O
OUTPUT3
10
O3
O
OUTPUT3
11
O4
O
OUTPUT4
11
O4
O
OUTPUT4
11
O4
O
OUTPUT4
12
B4
I
INPUT4
12
B4
I
INPUT4
12
B4
I
INPUT4
13
A4
I
INPUT4
13
A4
I
INPUT4
13
A4
I
INPUT4
14
VDD
―
Power Supply(+)
14
VDD
―
Power Supply(+)
14
VDD
―
Power Supply(+)
TRUTH TABLE
TRUTH TABLE
TRUTH TABLE
A
B
OUT
A
B
OUT
A
B
L
L
H
L
L
H
L
L
OUT
L
L
H
L
L
H
H
L
H
H
H
L
L
H
L
H
H
L
H
H
H
L
H
H
L
H
H
L
4) BU4070B Series
5) BU4081B Series
6) BU4093B Series
A1
1
14
VDD
A1
1
14
VDD
I1
1
14
VDD
B1
2
13
A4
B1
2
13
A4
I2
2
13
I8
O1
3
12
B4
O1
3
12
B4
O1
3
12
I7
O2
4
11
O4
O2
4
11
O4
O2
4
11
O4
B2
5
10
O3
B2
5
10
O3
I3
5
10
O3
9
B3
I4
6
9
I6
8
A3
VSS
7
8
I5
A2
6
9
B3
A2
6
VSS
7
8
A3
VSS
7
PIN No.
PIN NAME
I/O
PIN FUNCTION
PIN No.
PIN NAME
I/O
PIN FUNCTION
PIN No.
PIN NAME
I/O
PIN FUNCTION
1
A1
I
INPUT1
1
A1
I
INPUT1
1
I1
I
INPUT1
2
B1
I
INPUT1
2
B1
I
INPUT1
2
I2
I
INPUT2
3
O1
O
OUTPUT1
3
O1
O
OUTPUT1
3
O1
O
OUTPUT1
4
O2
O
OUTPUT2
4
O2
O
OUTPUT2
4
O2
O
OUTPUT2
5
B2
I
INPUT2
5
B2
I
INPUT2
5
I3
I
INPUT3
6
A2
I
INPUT2
6
A2
I
INPUT2
6
I4
I
INPUT4
7
VSS
―
Power Supply(-)
7
VSS
―
Power Supply(-)
7
VSS
―
Power Supply(-)
8
A3
I
INPUT3
8
A3
I
INPUT3
8
I5
I
INPUT5
9
B3
I
INPUT3
9
B3
I
INPUT3
9
I6
I
INPUT6
10
O3
O
OUTPUT3
10
O3
O
OUTPUT3
10
O3
O
OUTPUT3
11
O4
O
OUTPUT4
11
O4
O
OUTPUT4
11
O4
O
OUTPUT4
12
B4
I
INPUT4
12
B4
I
INPUT4
12
I7
I
INPUT7
13
A4
I
INPUT4
13
A4
I
INPUT4
13
I8
I
INPUT8
14
VDD
―
Power Supply(+)
14
VDD
―
Power Supply(+)
14
VDD
―
Power Supply(+)
TRUTH TABLE
TRUTH TABLE
TRUTH TABLE
A
B
OUT
A
B
OUT
A
B
L
L
L
L
L
L
L
L
H
L
H
H
L
H
L
L
H
H
H
L
H
H
L
L
H
L
H
H
H
L
H
H
H
H
H
L
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
18 / 21
6
OUT
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
7) BU4069UB Series
Technical Note
8) BU4584B Series
I1
1
14
VDD
I1
1
14
VDD
O1
2
13
I6
O1
2
13
I6
O6
I2
3
12
O6
I2
3
12
O2
4
11
I5
O2
4
11
I5
I3
5
10
O5
I3
5
10
O5
O3
6
9
I4
O3
6
9
I4
VEE
7
8
O4
VEE
7
8
O4
PIN No.
PIN NAME
I/O
PIN FUNCYION
PIN No.
PIN NAME
I/O
1
I1
I
INPUT1
1
I1
I
PIN FUNCYION
INPUT1
2
O1
O
OUTPUT1
2
O1
O
OUTPUT1
3
I2
I
INPUT2
3
I2
I
INPUT2
4
O2
O
OUTPUT2
4
O2
O
OUTPUT2
5
I3
I
INPUT3
5
I3
I
INPUT3
6
O3
O
OUTPUT3
6
O3
O
OUTPUT3
7
VSS
―
Power Supply(-)
7
VSS
―
Power Supply(-)
8
I4
O
OUTPUT4
8
I4
O
OUTPUT4
9
O4
I
INPUT4
9
O4
I
INPUT4
10
I5
O
OUTPUT5
10
I5
O
OUTPUT5
11
O5
I
INPUT5
11
O5
I
INPUT5
12
I6
O
OUTPUT6
12
I6
O
OUTPUT6
13
O6
I
INPUT6
13
O6
I
INPUT6
14
VDD
―
Power Supply(+)
14
VDD
―
Power Supply(+)
TRUTH TABLE
IN
H
L
TRUTH TABLE
OUT
L
H
IN
H
L
OUT
L
H
●Notes for use
1. Absolute maximum ratings
An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can break
down the devices, thus making impossible to identify breaking mode, such as a short circuit or an open circuit. If any over rated
values will expect to exceed the absolute maximum ratings, consider adding circuit protection devices, such as fuses.
2. Connecting the power supply connector backward
Connecting of the power supply in reverse polarity can damage IC. Take precautions when connecting the power supply
lines. An external direction diode can be added.
3. Power supply lines
Design PCB layout pattern to provide low impedance GND and supply lines. To obtain a low noise ground and supply line,
separate the ground section and supply lines of the digital and analog blocks. Furthermore, for all power supply terminals
to ICs, connect a capacitor between the power supply and the GND terminal. When applying electrolytic capacitors in the
circuit, not that capacitance characteristic values are reduced at low temperatures.
4. GND voltage
The potential of GND pin must be minimum potential in all operating conditions.
5. Thermal design
Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions.
6. Inter-pin shorts and mounting errors
Use caution when positioning the IC for mounting on printed circuit boards. The IC may be damaged if there is any
connection error or if pins are shorted together.
7. Actions in strong electromagnetic field
Use caution when using the IC in the presence of a strong electromagnetic field as doing so may cause the IC to malfunction.
8. Testing on application boards
When testing the IC on an application board, connecting a capacitor to a pin with low impedance subjects the IC to stress.
Always discharge capacitors after each process or step. Always turn the IC's power supply off before connecting it to or
removing it from a jig or fixture during the inspection process. Ground the IC during assembly steps as an antistatic
measure. Use similar precaution when transporting or storing the IC.
9. Ground Wiring Pattern
When using both small signal and large current GND patterns, it is recommended to isolate the two ground patterns,
placing a single ground point at the ground potential of application so that the pattern wiring resistance and voltage
variations caused by large currents do not cause variations in the small signal ground voltage. Be careful not to change the
GND wiring pattern of any external components, either.
10. Unused input terminals
Connect all unused input terminals to VDD or VSS in order to prevent excessive current or oscillation.
Insertion of a resistor (100kΩ approx.) is also recommended
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
19 / 21
6
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
●Ordering part number
B
U
4
Part No.
0
0
Part No.
4001B
4011B
4030B
4070B
1
B
F
V
-
Package
None: DIP14
F
: SOP14
FV : SSOP-B14
4081B
4093B
4069UB
4584B
E
2
Packaging and forming specification
E2: Embossed tape and reel
None:Tray,Tube
SOP14
<Tape and Reel information>
8.7 ± 0.2
(MAX 9.05 include BURR)
8
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
0.3MIN
4.4±0.2
6.2±0.3
14
1
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
7
1.5±0.1
0.15 ± 0.1
0.4 ± 0.1
0.11
1.27
0.1
1pin
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
Reel
(Unit : mm)
SSOP-B14
<Tape and Reel information>
5.0 ± 0.2
8
0.3Min.
4.4 ± 0.2
6.4 ± 0.3
14
1
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
7
0.10
1.15 ± 0.1
0.15 ± 0.1
0.65
0.1
0.22 ± 0.1
1pin
(Unit : mm)
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
Reel
20 / 21
6
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
2009.06 - Rev.A
BU4001B/F,BU4011B/F/FV,BU4030B/F,BU4070B/F,
BU4081B/F/FV,BU4093B/F/FV,BU4069UB/F/FV,BU4584B/F/FV
Technical Note
DIP14
<Tape and Reel information>
19.4±0.3
14
6.5±0.3
8
3.2±0.2 4.25±0.3
0.51Min.
1
Container
Tube
Quantity
1000pcs
Direction of feed
Direction of products is fixed in a container tube
7
7.62
0.3±0.1
0°−15°
2.54
0.5±0.1
∗ Order quantity needs to be multiple of the minimum quantity.
(Unit : mm)
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
21 / 21
6
2009.06 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of
any of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
R0039A
Similar pages