Rohm BU4551B High voltage cmos logic ics switch> Datasheet

General-purpose CMOS Logic IC Series (BU4S,BU4000B Series)
High Voltage CMOS Logic ICs
<Analog Switch>
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,
BU4051BCF,BU4051BCFV,BU4052BC,BU4052BCF,BU4052BCFV,
BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
No.11050EBT05
●Description
BU4066BC series ICs each contain 4 independent switches capable of controlling either digital or analog signals.
BU4051BC / BU4052BC / BU4053BC / and BU4551B series ICs are analog selectable composite multiplexer/demultiplexer.
BU4051BC series is configured with 8 channels, BU4052BC is configured with two 4 channels,BU4053BC series is
configured with three 2 channels, BU4551B series is configured with four 2 channels, and switches applicable for each
channel are turned on according to digital signals of control terminal. Even if the logic amplitude (VDD-VSS) of the control
signal is small, signals of large amplitude (VDD-VEE) can be switched.
●Features
1) Low power consumption
2) Wide operating supply voltage (3[V]~18[V])
3) High input impedance
4) L-TTL2 input and LS-TTL1 can be driven directly.
5) Applicable channel switches can be turned “ON” and “OFF” by the digital control signal.
6) Small control voltage (VDD-VSS) can control signals of large amplitude (VDD-VEE).
7) Linearity with excellent transfer characteristics
●Use
This product is used as the switch and chopper modulation circuit of analog and digital signals.
Since ON resistance of each switch is low, the product can be connected to low impedance circuit.
The product can be used as ON/OFF switch and changeover switch of high-speed lines without degrading analog signals
such as voice and images.
●Lineup
High Voltage CMOS Logic
Analog Switch
4
circuits
switch
1
circuits
8 to 1
multiplexer
2
circuits
4 to 1
multiplexer
3
circuits
2 to 1
multiplexer
4
circuits
2 to 1
multiplexer
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
BU4066BC/
BU4066BCF/
BU5066BCFV
BU4051BC/
BU4051BCF/
BU4051BCFV
BU4052BC/
BU4052BCF/
BU4052BCFV
BU4053BC/
BU4053BCF/
BU4053BCFV
BU4551B/
BU4551B F/
BU4551B FV
1/17
(Quad-analog switch)
(8ch analog multiplexer/demultiplexer)
(Dual 4ch analog multiplexer/demultiplexer)
(Triple 2ch analog multiplexer/demultiplexer)
(Quad 2ch analog multiplexer/demultiplexer)
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
●Absolute Maximum Ratings
Parameter
Symbol
Power Supply Voltage
Supply current
Operating temperature
Storage temperature
Input Voltage
Maximum junction temperature
VDD
Iin
Topr
Tstg
VIN
Tjmax
BU4066BC
Limit
BU4051BC BU4052BC
-0.5 to 20
±10
-40 to 85
-55 to 150
-0.5 to VDD+0.5
150
Unit
BU4053BC
BU4551B
-0.3 to 18
-0.3 to VDD+0.3
V
mA
℃
℃
V
℃
●Recommended Operating Conditions
Symbol
Parameter
Operating Power Supply
Input Voltage
BU4066BC
VDD
VIN
Limit
BU4051BC BU4052BC
3 to 18
0 to VDD
BU4053BC
BU4551B
3 to 16
Unit
V
V
●Thermal Derating Curve
1400
1400
1180[mV] BU4066BC
(*1)
870[mV] BU4066BCFV (*2)
610[mV] BU4066BCF
1000
(*3)
800
600
400
1000
200
(*1)
9.5
620[mV] BU4***FV (*5)
(*2)
7.0
380[mV] BU4***F
(*3)
4.9
(*4)
10.0
(*5)
5.0
(*6)
3.1
1250[mV] BU4***
1200
Power Dissipation Pd〔mW〕
Power Dissipation Pd〔mW〕
1200
(*4)
(*6)
800
(*) Below shows BU4***
600
BU4051BC
BU4052BC
BU4053BC
BU4551B
400
When used at Ta=25[°C] or above,
values of above are reduced per 1[°C].
Allowable loss is the value for mounting
70[mm] x 70[mm] x 1.6[mm] FR4 glass epoxy
circuit board copper foil area is 3% or less).
200
85℃
85℃
0
0
0
25
●I/O Interface
50
75
100
125
150
Ambient temperature Ta〔℃〕
175
0
25
50
75
100
125
150
Ambient temperature Ta〔℃〕
VDD
GND
<Analog switch input / output>
mW/℃
175
VDD
VDD
GND
GND
<Input>
●Description of output rising / falling wave
・tPLH: Time up to 50% of the rise time of input waveform
~ 50% of the rise time of output waveform
・tPHL: Time up to 50% of the fall time of input waveform
~ 50% of the fall time of output waveform
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
・tPZH: Time up to 50% of input ~ 50% of the
rise time of output waveform
・tPHZ: Time up to 50% of input ~ 50% of the
fall time of output waveform
2/17
・tPZH: Time up to 50% of input ~ 50% of the
fall time of output waveform
・tPHZ: Time up to 10% of input ~ 10% of the
rise time of output waveform
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
●Electrical Characteristics(BU4066BC)
DC Characteristics(Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
3.5
Input “H” voltage
VIH
7.0
11.0
1.5
Input “L” voltage
VIL
3.0
3.75
Input “H” current
IIH
0.3
Input “L” current
IIL
-0.3
ON resistance
ON resistance defluxion
V
V
μA
μA
VDD[V]
5
10
15
5
10
15
15
15
-
150
600
5
-
500
950
5
200
600
120
500
10
-
80
280
15
-
25
10
5
-
-
-
0.3
-
-
-0.3
RON
△RON
Unit
Ω
Ω
5
5
10
15
15
Technical Note
Condition
Fig.No
-
-
-
-
VIH=15[V]
VIL=0[V]
VIN=0.25[V]
RL=10[kΩ]
VIN=2.5[V]
RL=10[kΩ]
VIN=5[V]
RL=10[kΩ]
VIN=5[V]
RL=10[kΩ]
VIN=7.5[V]
RL=10[kΩ]
-
1
VI=VDD/2
RL=10[kΩ]
-
VIN=15[V]
VOUT=0[V]
VIN=0[V]
VOUT=15[V]
-
VI=VDD or GND
-
Channel-OFF
Leakage current
IOFF
Static supply current
IDD
-
-
1.0
2.0
4.0
μA
5
10
15
CC
-
8
-
pF
-
f=1[MHz]
-
CS
-
10
-
pF
-
f=1[MHz]
-
Input capacitance
(control input)
Input capacitance
(switch input)
μA
15
Switching Characteristics(Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
VDD[V]
MIN
TYP
MAX
20
50
5
Propagation delay time
tPLH
12
40
10
ns
SWIN→OUT
tPHL
10
30
15
40
90
5
Propagation delay time
tPHZ,tPLZ
35
80
10
ns
CONT→OUT
tPZH,tPZL
30
70
15
60
140
5
Propagation delay time
tPHZ,tPLZ
20
50
10
ns
CONT→OUT
tPZH,tPZL
15
40
15
Feed through attenuation
FT
-
0.7
-
MHz
5
Sine wave distortion
D
-
0.1
-
%
5
CTc
-
-
600
mVp-p
5
CT
-
1
-
MHz
5
Cross talk
(CONT→OUT)
Cross talk(2)
Between channels
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
3/17
Condition
RL=10[kΩ]
Fig.No
2・3
Output“H”“L”
→“Hi Z”
RL=1[kΩ]
Output“Hi Z”
→“H”“L”
RL=1[kΩ]
VSS=-5[V]
RL=10[kΩ]
VSS=-5[V]
RL=10[kΩ]
VSS=-5[V]
RL=10[kΩ],f=1[MHz]
VSS=-5[V]
RL=10[kΩ]
4・5
6・7
-
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
●Electrical Characteristics(BU4051BC)
DC Characteristics(Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
3.5
Input “H” voltage
VIH
7.0
11.0
1.5
Input “L” voltage
VIL
3.0
4.0
Input “H” current
IIH
0.3
Input “L” current
IIL
-0.3
950
ON resistance
RON
250
160
10
ON resistance defluxion
△RON
6
4
0.3
Channel-OFF
IOFF
Leakage current
-0.3
5
Static supply current
IDD
10
15
Unit
V
V
μA
μA
Ω
Ω
μA
μA
VDD[V]
5
10
15
5
10
15
15
15
5
10
15
5
10
15
15
15
5
10
15
Switching Characteristics(Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
15
45
5
Propagation delay time
tPLH
8
20
10
ns
CHANNEL IN→OUT
tPHL
6
15
15
170
550
5
Propagation delay time
tPHZ,tPLZ
90
240
10
ns
CONT→OUT
tPZH,tPZL
70
160
15
150
450
5
Propagation delay time
tPHZ,tPLZ
70
210
10
ns
INHIBIT→OUT
tPZH,tPZL
50
160
15
Maximum propagation
fMAX.
20
MHz
5
frequency
Feed through attenuation
FT
0.5
MHz
5
Sine wave distortion
D
0.02
%
5
Input capacitance
CC
5
pF
(control input)
Input capacitance
CS
10
pF
(switch input)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
4/17
Technical Note
Condition
Fig.No
-
-
-
-
VIH=15[V]
VIL=0[V]
-
-
8
-
-
-
-
VI=VDD or GND
-
Condition
Fig.No
-
9・10
-
-
11・12
13・14
15・16
17・18
VEE=-5[V]
-
VEE=-5[V]
VEE=-5[V]
-
-
-
-
-
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
●Electrical Characteristics(BU4052BC)
DC Characteristics(Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
3.5
Input “H” voltage
VIH
7.0
11.0
1.5
Input “L” voltage
VIL
3.0
4.0
Input “H” current
IIH
0.3
Input “L” current
IIL
-0.3
950
ON resistance
RON
250
160
10
ON resistance defluxion
△RON
6
4
0.3
Channel-OFF
IOFF
Leakage current
-0.3
5
Static supply current
IDD
10
15
Unit
V
V
μA
μA
Ω
Ω
μA
μA
Switching Characteristics(Unless otherwise noted, Ta=25℃,CL=50pF)
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
15
45
Propagation delay time
tPLH
8
20
ns
SWITCH IN→OUT
tPHL
6
15
170
550
Propagation delay time
tPHZ,tPLZ
90
240
ns
CONT→OUT
tPZH,tPZL
70
160
150
450
Propagation delay time
tPHZ,tPLZ
70
210
ns
INH→OUT
tPZH,tPZL
50
160
Maximum propagation
fMAX.
20
MHz
frequency
Feed through attenuation
FT
0.5
MHz
Sine wave distortion
D
0.02
%
Input capacitance
CC
5
pF
(control input)
Input capacitance
CS
10
pF
(switch input)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
5/17
VDD[V]
5
10
15
5
10
15
15
15
5
10
15
5
10
15
15
15
5
10
15
VDD[V]
5
10
15
5
10
15
5
10
15
Technical Note
Condition
Fig.No
-
-
-
-
VIH=15[V]
VIL=0[V]
-
-
19
-
-
-
-
VI=VDD or GND
-
Condition
Fig.No
-
20・21
-
22・23
24・25
26・27
28・29
-
5
VEE=-5[V]
-
5
5
VEE=-5[V]
VEE=-5[V]
-
-
-
-
-
-
-
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
●Electrical Characteristics(BU4053BC)
DC Characteristics(Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
3.5
Input “H” voltage
VIH
7.0
11.0
1.5
Input “L” voltage
VIL
3.0
4.0
Input “H” current
IIH
0.3
Input “L” current
IIL
-0.3
950
RON resistance
RON
250
160
10
RON resistance defluxion
△RON
6
4
0.3
Channel-OFF
IOFF
Leakage current
-0.3
5
Static supply current
IDD
10
15
Unit
V
V
μA
μA
Ω
Ω
μA
μA
VDD[V]
5
10
15
5
10
15
15
15
5
10
15
5
10
15
15
15
5
10
15
Switching Characteristics(Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
15
45
5
Propagation delay time
tPLH
8
20
10
ns
SW IN→OUT
tPHL
6
15
15
170
550
5
Propagation delay time
tPHZ,tPLZ
90
240
10
ns
CONT→OUT
tPZH,tPZL
70
160
15
150
380
5
Propagation delay time
tPHZ,tPLZ
70
200
10
ns
INH→OUT
tPZH,tPZL
50
160
15
Maximum propagation
fMAX.
20
MHz
5
frequency
Feed through attenuation
FT
0.7
MHz
5
Sine wave distortion
D
0.02
%
5
Input capacitance
CC
5
pF
(control input)
Input capacitance
CS
10
pF
(switch input)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
6/17
Technical Note
Condition
Fig.No
-
-
-
-
VIH=15[V]
VIL=0[V]
-
-
30
-
-
-
-
VI=VDD or GND
-
Condition
Fig.No
-
31・32
-
33・34
35・36
37・38
39・40
VEE=-5[V]
-
VEE=-5[V]
VEE=-5[V]
-
-
-
-
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
●Electrical Characteristics(BU4551BC)
DC Characteristics(Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
3.5
Input “H” voltage
VIH
7.0
11.0
1.5
Input “L” voltage
VIL
3.0
4.0
Input “H” current
IIH
0.3
Input “L” current
IIL
-0.3
1100
ON resistance
RON
500
280
25
ON resistance defluxion
△RON
10
5
0.3
Channel-OFF
IOFF
Leakage current
-0.3
5
Static supply current
IDD
10
15
Unit
V
V
μA
μA
Ω
Ω
μA
μA
VDD[V]
5
10
15
5
10
15
15
15
5
10
15
5
10
15
15
15
5
10
15
Switching Characteristics(Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
Condition
Fig.No
-
-
-
-
VIH=15[V]
VIL=0[V]
-
-
41
-
-
-
-
VI=VDD or GND
-
Condition
Fig.No
-
42・43
-
44・45
-
46・47
-
35
-
-
15
12
360
160
120
360
160
120
-
ns
fMAX.
-
15
-
MHz
-
VEE=-5[V]
-
FT
D
-
0.7
0.02
-
MHz
%
-
VEE=-5[V]
VEE=-5[V]
-
CC
-
5
-
pF
-
-
-
CS
-
10
-
pF
-
-
-
Propagation delay time
SW IN→OUT
tPLH
tPHL
Propagation delay time
CONT→OUT
tPZH
tPHZ
Propagation delay time
INH→OUT
tPZL
tPLZ
Maximum propagation
frequency
Feed through attenuation
Sine wave distortion
Input capacitance
(control input)
Input capacitance
(switch input)
Technical Note
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
7/17
5
ns
ns
10
15
5
10
15
5
10
15
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
●Reference Data(BU4066BC)
50
300
50
[BU4066BC/F/FV]
[BU4066BC/F/FV]
85[℃]
25[℃]
150
VDD=10[V]
85[℃]
-40[℃]
25[℃]
100
VDD=15[V]
85[℃]
-40[℃]
25[℃]
-40[℃]
30
VDD=3[V]
20
VDD=5[V]
VDD=10[V]
10
50
0
0
5
10
-25
0
25
75
100
VDD=10[V]
VDD=18[V]
-50
175
75
VDD=5[V]
50
50
75
100
Fig.3 falling propagation delay
(IN-OUT)
[BU4066BC/F/FV]
175
Operating Temperature Range
150
Propagation Delay [ns]
Propagation Delay [ns]
100
25
[BU4066BC/F/FV]
Operating Temperature Range
VDD=3[V]
0
200
[BU4066BC/F/FV]
150
-25
Ambient Temperature [℃]
200
200
Propagation Delay [ns]
50
Fig.2 rising propagation delay
(IN-OUT)
Fig.1 On resistance-input voltage
125
VDD=5[V]
Ambient Temperature [℃]
Input Voltage [V]
175
VDD=3[V]
20
0
-50
15
30
10
VDD=18[V]
0
Operating Temperature Range
40
Propagation Delay [ns]
200
[BU4066BC/F/FV]
Operating Temperature Range
40
VDD=5[V]
Propagation Delay [ns]
ON Resistance [Ω]
250
125
100
VDD=3[V]
75
VDD=5[V]
50
VDD=10[V]
Operating Temperature Range
150
125
VDD=3[V]
VDD=5[V]
VDD=10[V]
VDD=18[V]
100
75
50
VDD=10[V]
VDD=18[V]
25
25
25
VDD=18[V]
0
0
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.4 rising propagation delay
(CONT-OUT ,tPZH)
0
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.5 falling propagation delay
(CONT-OUT ,tPHZ)
Fig.6 rising propagation delay
(CONT-OUT ,tPLZ)
200
[BU4066BC/F/FV]
Propagation Delay [ns]
175
Operating Temperature Range
150
125
100
VDD=3[V]
75
VDD=5[V]
50
VDD=10[V]
25
VDD=18[V]
0
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.7 falling propagation delay
(CONT-OUT ,tPZL)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
8/17
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
●Reference Data(BU4051BC)
50
300
50
[BU4051BC/F/FV]
[BU4051BC/F/FV]
VDD=5[V]
Propagation Delay [ns]
40
200
25[℃]
150
-40[℃]
VDD=10[V]
85[℃]
25[℃]
100
VDD=15[V]
85[℃]
-40[℃]
25[℃]
-40[℃]
30
20
10
50
VDD=3[V]
VDD=5[V]
VDD=10[V]
VDD=18[V]
30
20
10
Operating Temperature Range
Operating Temperature Range
0
0
0
5
10
0
-50
15
-25
0
25
50
75
100
Input Voltage [V]
Ambient Temperature [℃]
Fig.8 ON resistance-input voltage
Fig.9 propagation delay time tPLH
(IN-OUT)
-50
Propagation Delay [ns]
400
300
200
VDD=5[V]
100
25
75
100
[BU4051BC/F/FV]
400
VDD=3[V]
300
VDD=5[V]
200
VDD=10[V]
VDD=18[V]
100
VDD=10[V]
50
Fig.10 propagation delay time tPHL
(IN-OUT)
[BU4051BC/F/FV]
Operating Temperature Range
VDD=3[V]
0
500
[BU4051BC/F/FV]
400
-25
Ambient Temperature [℃]
500
500
Propagation Delay [ns]
40
VDD=3[V]
VDD=5[V]
VDD=10[V]
VDD=18[V]
Propagation Delay [ns]
ON Resistance [Ω]
85[℃]
[BU4051BC/F/FV]
Propagation Delay [ns]
250
VDD=3[V]
300
VDD=5[V]
200
VDD=10[V]
VDD=18[V]
100
Operating Temperature Range
Operating Temperature Range
VDD=18[V]
0
0
-50
-25
0
25
50
75
0
-50
100
-25
0
25
75
100
-50
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.11 propagation delay time tPZH
(CONT-OUT)
VDD=5[V]
100
400
VDD=3[V]
300
200
VDD=5[V]
100
VDD=10[V]
75
100
[BU4051BC/F/FV]
Operating Temperature Range
Propagation Delay [ns]
Propagation Delay [ns]
200
50
500
400
VDD=3[V]
25
[BU4051BC/F/FV]
Operating Temperature Range
300
0
Fig.13 propagation delay time tPLZ
(CONT-OUT)
500
[BU4051BC/F/FV]
400
-25
Ambient Temperature [℃]
Fig.12 propagation delay time tPHZ
(CONT-OUT)
500
Propagation Delay [ns]
50
VDD=3[V]
300
VDD=5[V]
200
VDD=10[V]
VDD=18[V]
100
VDD=10[V]
Operating Temperature Range
VDD=18[V]
0
VDD=18[V]
0
-50
-25
0
25
50
75
100
-50
Ambient Temperature [℃]
-25
0
25
0
75
100
Ambient Temperature [℃]
Fig.14 propagation delay time tPZL
(CONT-OUT)
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.15 propagation delay time tPZH
(INH-OUT)
500
Fig.16 propagation delay time tPHZ
(INH-OUT)
500
[BU4051BC/F/FV]
400
300
VDD=5[V]
VDD=10[V]
VDD=18[V]
100
Operating Temperature Range
400
VDD=3[V]
200
[BU4051BC/F/FV]
Propagation Delay [ns]
Propagation Delay [ns]
50
300
VDD=3[V]
200
VDD=5[V]
100
VDD=10[V]
Operating Temperature Range
0
VDD=18[V]
0
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.17 propagation delay time tPZL
(INH-OUT)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.18 propagation delay time tPLZ
(INH-OUT)
9/17
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
●Reference Data(BU4052BC)
300
50
50
[BU4052BC/F/FV]
VDD=5[V]
40
Propagation Delay [ns]
200
25[℃]
150
VDD=10[V]
-40[℃]
85[℃]
25[℃] VDD=15[V]
85[℃]
-40[℃]
100
25[℃]
-40[℃]
30
VDD=3[V]
20
VDD=5[V]
VDD=10[V]
10
50
0
5
10
15
-25
0
25
VDD=5[V]
VDD=10[V]
VDD=18[V]
50
75
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.19 ON resistance-input voltage
Fig.20 propagation delay time tPLH
(IN-OUT)
Fig.21 propagation delay time tPHL
(IN-OUT)
500
500
500
[BU4052BC/F/FV]
[BU4052BC/F/FV]
Propagation Delay [ns]
VDD=5[V]
VDD=10[V]
200
VDD=3[V]
400
300
VDD=18[V]
100
[BU4052BC/F/FV]
300
VDD=5[V]
VDD=10[V]
200
VDD=18[V]
25
50
75
100
-25
0
25
50
75
-50
100
[BU4052BC/F/FV]
Operating Temperature Range
Propagation Delay [ns]
VDD=5[V]
100
400
VDD=3[V]
300
200
VDD=5[V]
100
VDD=10[V]
50
75
100
[BU4052BC/F/FV]
Operating Temperature Range
400
200
25
500
500
[BU4052BC/F/FV]
VDD=3[V]
0
Fig.24 propagation delay time tPLZ
(CONT-OUT)
Fig.23 propagation delay time tPHZ
(CONT-OUT)
500
-25
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.22 propagation delay time tPZH
(CONT-OUT)
300
VDD=18[V]
0
-50
Ambient Temperature [℃]
400
VDD=10[V]
Operating Temperature Range
0
0
VDD=5[V]
200
Operating Temperature Range
0
-25
300
100
100
Operating Temperature Range
-50
VDD=3[V]
400
Propagation Delay [ns]
VDD=3[V]
400
Propagation Delay [ns]
VDD=3[V]
20
0
-50
Input Voltage [V]
Propagation Delay [ns]
30
10
VDD=18[V]
0
0
Operating Temperature Range
40
Propagation Delay [ns]
ON Resistance [Ω]
85[℃]
[BU4052BC/F/FV]
Operating Temperature Range
Propagation Delay [ns]
250
[BU4052BC/F/FV]
VDD=3[V]
300
VDD=5[V]
VDD=10[V]
200
VDD=18[V]
100
VDD=10[V]
Operating Temperature Range
VDD=18[V]
0
VDD=18[V]
0
-50
-25
0
25
50
75
100
-50
Ambient Temperature [℃]
-25
0
25
0
75
100
Fig.26 propagation delay time tPZH
(INH-OUT)
500
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.25 propagation delay time tPZL
(CONT-OUT)
Fig.27 propagation delay time tPHZ
(INH-OUT)
500
[BU4052BC/F/FV]
[BU4052BC/F/FV]
400
Operating Temperature Range
400
Propagation Delay [ns]
Propagation Delay [ns]
50
VDD=3[V]
300
VDD=5[V]
200
VDD=10[V]
VDD=18[V]
100
300
VDD=3[V]
200
VDD=5[V]
100
VDD=10[V]
Operating Temperature Range
VDD=18[V]
0
0
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.28 propagation delay time tPZL
(INH-OUT)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.29 propagation delay time tPLZ
(INH-OUT)
10/17
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
●Reference Data(BU4053BC)
300
50
50
[BU4053BC/F/FV]
VDD=5[V]
40
Propagation Delay [ns]
200
25[℃]
150
VDD=10[V]
-40[℃]
85[℃]
25[℃] VDD=15[V]
85[℃]
-40[℃]
25[℃]
-40[℃]
100
30
VDD=3[V]
20
VDD=5[V]
VDD=10[V]
10
50
0
5
10
15
VDD=10[V]
VDD=18[V]
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.30 ON resistance-input voltage
Fig.31 propagation delay time tPLH
(IN-OUT)
Fig.32 propagation delay time tPHL
(IN-OUT)
500
500
500
[BU4053BC/F/FV]
400
VDD=3[V]
300
VDD=5[V]
200
VDD=10[V]
100
VDD=5[V]
200
0
VDD=10[V]
-25
0
25
50
75
100
-25
0
25
50
75
100
Propagation Delay [ns]
200
VDD=5[V]
VDD=3[V]
200
VDD=5[V]
50
75
100
Ambient Temperature [℃]
-25
0
25
50
300
VDD=5[V]
200
VDD=10[V]
VDD=18[V]
0
75
100
Ambient Temperature [℃]
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.37 propagation delay time tPZH
(INH-OUT)
500
VDD=3[V]
Operating Temperature Range
VDD=18[V]
-50
Fig.36 propagation delay time tPZL
(CONT-OUT)
100
[BU4053BC/F/FV]
100
VDD=10[V]
0
25
75
400
300
VDD=18[V]
0
50
Fig.35 propagation delay time tPLZ
(CONT-OUT)
Operating Temperature Range
100
VDD=10[V]
0
25
500
400
VDD=3[V]
0
[BU4053BC/F/FV]
Operating Temperature Range
300
-25
Ambient Temperature [℃]
500
[BU4053BC/F/FV]
-25
VDD=18[V]
-50
Fig.34 propagation delay time tPHZ
(CONT-OUT)
500
-50
VDD=10[V]
Ambient Temperature [℃]
Fig.33 propagation delay time tPZH
(CONT-OUT)
100
VDD=5[V]
200
0
-50
Ambient Temperature [℃]
400
VDD=3[V]
300
100
VDD=18[V]
0
-50
Operating Temperature Range
400
VDD=3[V]
300
100
VDD=18[V]
[BU4053BC/F/FV]
Operating Temperature Range
Propagation Delay [ns]
Operating Temperature Range
Propagation Delay [ns]
Propagation Delay [ns]
VDD=5[V]
Input Voltage [V]
400
Propagation Delay [ns]
VDD=3[V]
20
0
-50
[BU4053BC/F/FV]
Fig.38 propagation delay time tPHZ
(INH-OUT)
500
[BU4053BC/F/FV]
[BU4053BC/F/FV]
Operating Temperature Range
VDD=3[V]
300
VDD=5[V]
200
VDD=10[V]
VDD=18[V]
100
Operating Temperature Range
400
Propagation Delay [ns]
400
Propagation Delay [ns]
30
10
VDD=18[V]
0
0
Operating Temperature Range
40
Propagation Delay [ns]
ON Resistance [Ω]
85[℃]
[BU4053BC/F/FV]
Operating Temperature Range
Propagation Delay [ns]
250
[BU4053BC/F/FV]
300
VDD=3[V]
200
VDD=5[V]
100
0
VDD=10[V]
VDD=18[V]
0
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.39 propagation delay time tPZL
(INH-OUT)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.40 propagation delay time tPLZ
(INH-OUT)
11/17
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
●Reference Data(BU4551B)
350
50
50
[BU4551B/F/FV]
[BU4551B/F/FV]
85[℃]
25[℃]
150
VDD=10[V]
-40[℃]
85[℃]
100
VDD=15[V]
25[℃]
85[℃]
-40[℃]
25[℃]
-40[℃]
50
VDD=5[V]
VDD=10[V]
10
0
0
5
10
15
30
VDD=3[V]
20
VDD=5[V]
VDD=10[V]
10
VDD=16[V]
0
VDD=16[V]
0
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Input Voltage [V]
Ambient Temperature [℃]
Fig.41 ON resistance-input voltage
Fig.42 propagation delay time tPLH
(IN-OUT)
Fig.43 propagation delay time tPHL
(IN-OUT)
800
800
800
[BU4551B/F/FV]
[BU4551B/F/FV]
VDD=3[V]
700
Propagation Delay [ns]
600
Operating Temperature Range
500
400
VDD=5[V]
300
200
VDD=10[V]
100
VDD=16[V]
600
VDD=3[V]
500
400
300
VDD=5[V]
200
VDD=10[V]
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.44 propagation delay time tPZH
(CONT-OUT)
Operating Temperature Range
600
500
VDD=3[V]
400
300
VDD=5[V]
200
VDD=10[V]
100
VDD=16[V]
0
-50
[BU4551B/F/FV]
700
Operating Temperature Range
100
0
Ambient Temperature [℃]
Propagation Delay [ns]
700
Propagation Delay [ns]
30
20
Operating Temperature Range
40
VDD=3[V]
Propagation Delay [ns]
200
[BU4551B/F/FV]
Operating Temperature Range
40
VDD=5[V]
250
Propagation Delay [ns]
ON Resistance [Ω]
300
VDD=16[V]
0
-50
-25
0
25
50
75
Ambient Temperature [℃]
100
Fig.45 propagation delay time tPHZ
(CONT-OUT)
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.46 propagation delay time tPLZ
(CONT-OUT)
800
[BU4551B/F/FV]
Propagation Delay [ns]
700
VDD=3[V]
600
Operating Temperature Range
500
400
VDD=5[V]
300
200
VDD=10[V]
100
VDD=16[V]
0
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.47 propagation delay time tPZL
(CONT-OUT)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
12/17
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
●Pin Configration・Pin Function・Block Diagram・Truth Table
1) BU4066BC Series
PIN FUNCTION
PIN No. PIN NAME
1
IN/OUT
2
OUT/IN
3
OUT/IN
I/O
I/O
I/O
I/O
PIN FUNCTION
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
I/O
Analog Switch Input / Output
14
VDD
OUT/IN IN/OUT
SWA
13
CONT.A
SWD
OUT/IN IN/OUT
12
CONT.D
4
11
IN/OUT
5
CONT.B
I
Control Input
6
CONT.C
I
Control Input
OUT/IN
7
VEE
-
Power Supply(-)
9
OUT/IN
8
IN/OUT
I/O
Analog Switch Input / Output
IN/OUT
9
OUT/IN
I/O
Analog Switch Input / Output
8
10
OUT/IN
I/O
Analog Switch Input / Output
11
IN/OUT
I/O
Analog Switch Input / Output
12
CONT.D
I
Control Input
13
CONT.A
I
Control Input
-
Power Supply(+)
IN/OUT
1
OUT/IN
2
OUT/IN
3
IN/OUT
4
CONT.B
5
IN/OUT OUT/IN
SWB
CONT.C
6
SWC
IN/OUT OUT/IN
VEE
7
VDD
10
VDD VDD
IN / OUT
IN/OUT
14
VDD
TRUTH TABLE
CONTROL
A
B
C
D
IN / OUT
CONT
ON SWITCH
A(1pin-2pin)
B(3pin-4pin)
C(8pin-9pin)
D(10pin-11pin)
2) BU4051BCSeries
CHANNEL
IN/OUT
X4
1
X6
2
6
COMMON
OUT/IN
X
3
X7
4
X5
5
INHIBIT
VDD
INHIBIT
A
B
C
VSS
VEE
4
1
7
0
5
3
INH
A
6
C
15
X2
4
X7
I/O
Analog Switch Input / Output
14
X1
5
X5
I/O
Analog Switch Input / Output
X0
6
INHIBIT
I
Control Input
13
7
VEE
-
Power Supply(-)
12
X3
8
VSS
-
Power Supply(-)
11
A
9
C
I
Control Input
10
B
I
Control Input
B
7
10
VSS
8
9
CHANNEL
IN/OUT
B
11
A
I
Control Input
C
12
X3
I/O
Analog Switch Input / Output
13
X0
I/O
Analog Switch Input / Output
14
15
X1
BINARY TO 1 of 8 DECODER
WITH INHIBIT
X0
X1
X2
X3
X4
X5
X6
X7
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
PIN FUNCTION
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
VDD
VEE
LEVEL
CONVERTER
I/O
I/O
I/O
I/O
16
2
OUT/IN
VEE
PIN FUNCTION
PIN No. PIN NAME
1
X4
2
X6
3
X
COMMON
X
X2
16
VDD
TRUTH TABLE
INHIBIT
A
L
L
L
H
L
L
L
H
L
L
L
H
L
L
L
H
H
X
13/17
I/O
Analog Switch Input / Output
I/O
-
Analog Switch Input / Output
Power Supply(+)
B
L
L
H
H
L
L
H
H
X
C
L
L
L
L
H
H
H
H
X
ON SWITCH
X0
X1
X2
X3
X4
X5
X6
X7
NONE
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
3) BU4052BC Series
Y0
1
Y2
2
2Y
COMMON Y
3
Y3
4
Y1
INHIBIT
VEE
VSS
0Y
OUT/IN X
1Y
OX
INH
3X
VEE
A
6
B
7
8
15
X2
4
Y3
I/O
Analog Switch Input / Output
14
X1
5
Y1
I/O
Analog Switch Input / Output
13
COMMON X
6
INHIBIT
I
Control Input
7
VEE
-
Power Supply(-)
8
VSS
-
Power Supply(-)
9
B
I
Control Input
12
X0
11
X3
10
A
10
A
I
Control Input
B
11
X3
I/O
Analog Switch Input / Output
12
13
X0
I/O
Analog Switch Input / Output
COMMON X
I/O
Analog Switch Input / Output
14
X1
I/O
Analog Switch Input / Output
I/O
-
Analog Switch Input / Output
Power Supply(+)
9
VDD
INHIBIT
A
B
LEVEL
CONVERTER
PIN FUNCTION
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
VDD
1X
3Y
I/O
I/O
I/O
I/O
16
2X
Y OUT/IN
5
PIN FUNCTION
PIN No. PIN NAME
1
Y0
2
Y2
3
COMMON Y
BINARY TO 1 of 4 DECODER
WITH INHIBIT
VSS
VEE
X0
X1
COMMON
X
X2
X3
Y0
Y1
Y2
15
X2
16
VDD
TRUTH TABLE
INHIBIT
A
L
L
L
L
H
COMMON
Y
Y3
L
H
L
H
X
B
ON SWITCH
L
L
H
H
X
X0, Y0
X1, Y1
X2, Y2
X3, Y3
NONE
4) BU4053BC Series
Y1
1
Y0
2
0Y
Z1
3
Z
4
Z0
5
1Y
INHIBIT
X
Z
1X
0Z
OX
15
Y
14
X
13
X1
12
X0
11
A
A
6
VEE
VDD
Y
1Z
INH
16
C
B
VEE
7
10
B
VSS
8
9
C
VDD
INHIBIT
A
B
C
VSS
VEE
X0
X1
LEVEL
CONVERTER
BINARY TO 1 of 2 DECODER
WITH INHIBIT
Y0
Y1
Z0
Z1
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
COMMON
X
COMMON
Y
COMMON
Z
PIN FUNCTION
PIN No. PIN NAME
1
Y1
2
Y0
3
Z1
4
Z
5
Z0
6
INHIBIT
7
VEE
8
VSS
9
C
10
B
11
A
12
X0
13
X1
14
X
15
Y
16
VDD
TRUTH TABLE
INHIBIT
A
L
L
L
H
L
L
L
H
L
L
L
H
L
L
L
H
H
X
14/17
I/O
I/O
I/O
I/O
I/O
I/O
I
I
I
I
I/O
I/O
I/O
I/O
B
L
L
H
H
L
L
H
H
X
PIN FUNCTION
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Control Input
Power Supply(-)
Power Supply(-)
Control Input
Control Input
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Power Supply(+)
C
L
L
L
L
H
H
H
H
X
ON SWITCH
X0,Y0,Z0
X1,Y0,Z0
X0,Y1,Z0
X1,Y1,Z0
X0,Y0,Z1
X1,Y0,Z1
X0,Y1,Z1
X1,Y1,Z1
NONE
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
5) BU4551B Series
W1
1
16
VDD
X0
2
15
W0
X1
3
14
W
X
4
13
Z
12
Z1
11
Z0
X0
Y
Y0
1Y
5
W0
W
X1
X
Z
Y
Z1
Y0
Z0
6
VEE
CONTROL
Y1
VEE
7
10
Y1
VSS
8
9
CONTROL
VDD
CONT
LEVEL
CONVERTER
CONTROL
VSS
VEE
W0
W1
X0
X1
Y0
Y1
Z0
Z1
COMMON
W
COMMON
X
COMMON
Y
COMMON
Z
PIN FUNCTION
PIN No. PIN NAME
1
W1
2
X0
3
X1
4
X
5
Y
6
Y0
7
VEE
8
VSS
9
CONTROL
10
Y1
11
Z0
12
Z1
13
Z
14
W
15
W0
16
VDD
TRUTH TABLE
CONTROL
0
1
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I
I/O
I/O
I/O
I/O
I/O
I/O
-
PIN FUNCTION
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Control Input
Power Supply(-)
Power Supply(-)
Control Input
Control Input
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Analog Switch Input / Output
Power Supply(+)
ON SWITCH
W0,X0,Y0,Z0
W1,X1,Y1,Z1
●Notes for use
1. Absolute maximum ratings
An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can
break down the devices, thus making impossible to identify breaking mode, such as short circuit or an open circuit. If any
over rated values will expect to exceed the absolute maximum ratings, consider adding circuit protection devices, such as
fuses.
2. Connecting the power supply connector backward
Connecting of the power supply in reverse polarity can damage IC. Take precautions when connecting the power supply
lines. An external direction diode can be added.
3. Power Supply lines
Design PCB layout pattern to provide low impedance GND and supply lines. To obtain a low noise ground and supply line,
separate the ground section and supply lines of the digital and analog blocks. Furthermore, for all power terminals to ICs,
connect a capacitor between the power supply and the GND terminal. When applying electrolytic capacitors in the circuit,
not that capacitance characteristic values are reduced at low temperatures.
4. GND voltage
The potential of GND pin must be minimum potential in all operating conditions.
5. Thermal design
Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions.
6. Inter-pin shorts and mounting errors
Use caution when positioning the IC for mounting on printed circuit boards. The IC may be damaged if there is any
connection error or if pins are shorted together.
7. Actions in strong electromagnetic field
Use caution when using the IC in the presence of a strong electromagnetic field as doing so may cause the IC to
malfunction.
8. Testing on application boards
When testing the IC on an application board, connecting a capacitor to a pin with low impedance subjects the IC to stress.
Always discharge capacitors after each process or step. Always turn the IC's power supply off before connecting it to or
remove it from a jig or fixture during the inspection process. Ground the IC during assembly steps as an antistatic measure.
Use similar precaution when transporting or storing the IC.
9.Ground Wiring Pattern
When using both small signal and large current GND patterns, it is recommended to isolate the two ground patterns,
placing a signal ground point at the ground potential of application so that the pattern wiring resistance and voltage
variations caused by large currents do not caused by large currents do not cause variations in the small signal ground
voltage. Be careful not to change the GND wiring pattern of any external components, either.
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
15/17
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
●Ordering part number
B
U
4
Part No.
5
5
Part No.
4066BC
4051BC
4052BC
1
B
F
V
-
Package
None: DIP14,DIP16
F : SOP14, SOP16
FV : SSOP-B14
SSOP-B16
4053BC
4551B
E
2
Packaging and forming specification
E2: Embossed tape and reel
None:Tray,Tube
SOP14
<Tape and Reel information>
8.7 ± 0.2
(MAX 9.05 include BURR)
8
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
0.3MIN
4.4±0.2
6.2±0.3
14
1
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
7
1.5±0.1
0.15 ± 0.1
0.4 ± 0.1
0.11
1.27
0.1
1pin
Reel
(Unit : mm)
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
SSOP-B14
<Tape and Reel information>
5.0 ± 0.2
8
1
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
0.3Min.
4.4 ± 0.2
6.4 ± 0.3
14
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
7
0.10
1.15 ± 0.1
0.15 ± 0.1
0.1
0.65
0.22 ± 0.1
1pin
Reel
(Unit : mm)
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
DIP14
<Tape and Reel information>
19.4±0.3
14
6.5±0.3
8
3.2±0.2 4.25±0.3
0.51Min.
1
Container
Tube
Quantity
1000pcs
Direction of feed
Direction of products is fixed in a container tube
7
7.62
0.3±0.1
0°−15°
2.54
0.5±0.1
∗ Order quantity needs to be multiple of the minimum quantity.
(Unit : mm)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
16/17
2011.08 - Rev.B
BU4066BC,BU4066BCF,BU4066BCFV,BU4051BC,BU4051BCF,BU4051BCFV,BU4052BC,
BU4052BCF,BU4052BCFV,BU4053BC,BU4053BCF,BU4053BCFV,BU4551B,BU4551BF,BU4551BFV
Technical Note
SOP16
<Tape and Reel information>
10 ± 0.2
(MAX 10.35 include BURR)
9
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
0.3MIN
4.4±0.2
6.2±0.3
16
1
8
0.11
1.5±0.1
0.15 ± 0.1
1.27
0.4 ± 0.1
0.1
1pin
Reel
(Unit : mm)
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
SSOP-B16
<Tape and Reel information>
5.0±0.2
9
1
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
0.3Min.
4.4±0.2
6.4±0.3
16
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
8
0.10
1.15±0.1
0.15±0.1
0.1
0.65
1pin
0.22±0.1
Reel
(Unit : mm)
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
DIP16
<Tape and Reel information>
Container
Tube
Quantity
1000pcs
Direction of feed
Direction of products is fixed in a container tube
19.4±0.3
9
1
8
0.51Min.
3.2±0.2 4.25±0.3
6.5±0.3
16
7.62
0.3±0.1
2.54
0.5±0.1
0°−15°
∗ Order quantity needs to be multiple of the minimum quantity.
(Unit : mm)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
17/17
2011.08 - Rev.B
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
R1120A
Similar pages