Rohm BU7275SHFV Full swing low voltage operation cmos operational amplifier Datasheet

Operational Amplifiers / Comparators
Full Swing Low Voltage Operation
CMOS Operational Amplifiers
BU7261G, BU7261SG, BU7295HFV, BU7295SHFV,
BU7262F/FVM/NUX, BU7262SF/FVM/NUX, BU7264F, BU7264SF,
BU7241G, BU7241SG, BU7275HFV, BU7275SHFV,
BU7242F/FVM/NUX, BU7242S F/FVM/NUX, BU7244F, BU7244SF
No.10049EAT22
●Description
Low Voltage CMOS Op-Amp integrates one or two or four independent output full swing Op-Amps and phase compensation
capacitors on a single chip. Especially, this series is operable with low voltage, low supply current and low input bias current.
・Input-Output Full Swing : BU7261 (BU7261S) family, BU7241 (BU7241S) family,
BU7295 (BU7295S) family, BU7275 (BU7275S) family,
BU7262 (BU7262S) family, BU7242 (BU7242S) family,
BU7264 (BU7264S) family, BU7244 (BU7244S) family,
●Features
1) Operable with low voltage
+1.8[V] ~ +5.5[V] (single supply):
BU7261/BU7241 family BU7262/BU7242 family
BU7264/BU7244 family BU7295/BU7275 family
2) Operable input-Output full swing
3) High slew rate (BU7261 family, BU7262 family)
(BU7295 family, BU7264 family)
4) Internal phase compensation
5) Wide temperature range
-40[℃] ~ +85[℃]
(BU7261G, BU7262 family, BU7264F, BU7295HFV)
(BU7241G, BU7242 family, BU7244F, BU7275HFV)
-40[℃] ~ +105[℃]
(BU7261SG, BU7262S family, BU7264SF, BU7295SHFV)
(BU7241SG, BU7242S family, BU7244SF, BU7275SHFV)
Input-Output Full Swing
High speed
Single
6)
7)
8)
9)
High large signal voltage gain
Low supply current
(BU7241 family, BU7242 family)
(BU7275 family, BU7244 family)
Low input bias current 1[pA](Typ.)
Internal ESD protection
Human body model (HBM)±4000[V](Typ.)
BU7261G
(BU7261SG: Operation guaranteed up to 105℃)
BU7295HFV
(BU7295SHFV: Operation guaranteed up to 105℃)
Dual
BU7262F/FVM/NUX
(BU7262S F/FVM/NUX: Operation guaranteed up to 105℃)
Quad
BU7264F
(BU7264SF: Operation guaranteed up to 105℃)
Low power
Single
BU7241G
(BU7241SG: Operation guaranteed up to 105℃)
BU7275HFV
(BU7275SHFV: Operation guaranteed up to 105℃)
Dual
BU7242F/FVM/NUX
(BU7242S F/FVM/NUX: Operation guaranteed up to 105℃)
Quad
BU7244F
(BU7244SF: Operation guaranteed up to 105℃)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Pin Assignments
OUT1 1
IN+
VSS
IN-
1
2
OUT1
VDD
5
+
IN1-
-
IN1+
3
4
OUT
VSS
1
8
VDD
7
OUT2
CH1
2
- +
CH2
3
+
-
4
6
5
14 OUT4
IN1- 2
IN2-
-
CH1
CH4
-
+
+
IN1+ 3
12 IN4+
VDD 4
11 VSS
IN2+ 5
10 IN3+
-
IN2- 6
IN2+
13 IN4-
+
-
+
9 IN3-
CH3
CH2
OUT2 7
SSOP5
HVSOF5
Input type
SOP8
MSOP8
8 OUT3
VSON008X2030
SOP14
Package
SSOP5
BU7261G
BU7261SG
Input-output Full Swing
BU7241G
BU7241SG
HVSOF5
BU7275HFV
BU7275SHFV
BU7295HFV
BU7295SHFV
SOP8
BU7262F
BU7262SF
BU7242F
BU7242SF
VSON008X2030
MSOP8
SOP14
BU7262NUX
BU7262SNUX
BU7242NUX
BU7242SNUX
BU7262FVM
BU7262SFVM
BU7242FVM
BU7242SFVM
BU7264F
BU7264SF
BU7244F
BU7244SF
●Absolute maximum rating (Ta=25[℃])
Ratings
Parameter
Symbol
BU7261G, BU7241G,
BU7262F/FVM/NUX
BU7242F/FVM/NUX
BU7264F, BU7244F
BU7295HFV, BU7275HFV
BU7261SG, BU7241SG,
BU7262SF/FVM/NUX
BU7242SF/FVM/NUX
BU7264SF, BU7244SF
BU7295SHFV, BU7275SHFV
Unit
VDD-VSS
+7
V
Vid
VDD-VSS
V
Input Common-mode Voltage Range
Vicm
(VSS-0.3)(VDD+0.3)
V
Operating Temperature
Topr
Storage Temperature
Tstg
-55 ~ +125
℃
Tjmax
+125
℃
Supply Voltage
Differential Input Voltage(*1)
Maximum Junction Temperature
-40 ~ +85
-40 ~ +105
℃
Note: Absolute maximum rating item indicates the condition which must not be exceeded.
Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment
may cause deterioration of characteristics.
(*1) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VSS.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
2/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Electrical characteristics
○BU7261 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
BU7261G,
BU7261SG
Temperature
Range
Min.
Typ.
Unit
Condition
Max.
25℃
-
1
9
Full range
-
-
10
Iio
25℃
-
1
-
pA
-
Ib
25℃
-
1
-
pA
-
25℃
-
250
550
Full range
-
-
600
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=1.5[V]
Input Offset Voltage (*2)(*3)
Vio
Input Offset Current (*2)
Input Bias Current (*2)
mV
VDD=1.8 ~ 5.5[V],
VOUT=VDD/2
Supply Current (*3)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
-
V
RL=10[kΩ]
Low Level Output Voltage
VOL
25℃
-
-
VSS+0.1
V
RL=10[kΩ]
Large Signal Voltage Gain
AV
25℃
70
95
-
dB
RL=10[kΩ]
Vicm
25℃
0
-
3
V
VDD-VSS=3[V]
Common-mode Rejection Ratio
CMRR
25℃
45
60
-
dB
-
Power Supply Rejection Ratio
PSRR
25℃
60
80
-
dB
-
Output Source Current (*4)
IOH
25℃
4
10
-
mA
VDD-0.4[V]
Output Sink Current (*4)
IOL
25℃
5
12
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
1.1
-
V/μs CL=25[pF]
Gain Band width
FT
25℃
-
2
-
MHz CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
Input Common-mode Voltage Range
Phase Margin
(*2)
(*3)
(*4)
°
CL=25[pF], AV=40[dB]
Absolute value
Full range: BU7261: Ta=-40[℃] ~ +85[℃] BU7261S: Ta=-40[℃] ~ +105[℃]
Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
3/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
○BU7262 family (Unless otherwise specified
Parameter
Symbol
Technical Note
VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
BU7262F/FVM/NUX
BU7262S F/FVM/NUX
Temperature
Range
Min.
Typ.
Unit
Condition
Max.
25℃
-
1
9
Full range
-
-
10
Iio
25℃
-
1
-
pA
-
Ib
25℃
-
1
-
pA
-
25℃
-
550
1100
Full range
-
-
1200
Input Offset Voltage (*5)(*6)
Vio
Input Offset Current (*5)
Input Bias Current (*5)
mV
VDD=1.8 ~ 5.5[V]
VOUT=VDD/2
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=1.5[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
3
V
VDD-VSS=3[V]
CMRR
25℃
45
60
-
dB
-
PSRR
25℃
60
80
-
dB
-
Output Source Current (*7)
IOH
25℃
4
10
-
mA
VDD-0.4[V]
Output Sink Current (*7)
IOL
25℃
5
12
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
1.1
-
V/μs CL=25[pF]
Gain Band width
FT
25℃
-
2
-
MHz CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=0.8[Vp-p],
f=1[kHz]
CS
25℃
-
100
-
dB
AV=40[dB]
Supply Current (*6)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode Rejection Ratio
Power Supply Rejection Ratio
Input Common-mode Voltage Range
Phase Margin
Total Harmonic Distortion
Channel Separation
(*5)
(*6)
(*7)
Absolute value
Full range: BU7262: Ta=-40[℃] ~ +85[℃] BU7262S: Ta=-40[℃] ~ +105[℃]
Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
4/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
○BU7264 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
BU7264F
BU7264SF
Temperature
Range
Min.
Typ.
Unit
Condition
Max.
25℃
-
1
9
Full range
-
-
10
Iio
25℃
-
1
-
pA
-
Ib
25℃
-
1
-
pA
-
25℃
-
1100
2300
Full range
-
-
2800
Input Offset Voltage (*8)(*9)
Vio
Input Offset Current (*8)
Input Bias Current (*8)
mV
VDD=1.8 ~ 5.5[V]
VOUT=VDD/2
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=1.5[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
3
V
VDD-VSS=3[V]
CMRR
25℃
45
60
-
dB
-
PSRR
25℃
60
80
-
dB
-
Output Source Current (*10)
IOH
25℃
4
10
-
mA
VDD-0.4[V]
Output Sink Current (*10)
IOL
25℃
5
12
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
1.1
-
V/μs CL=25[pF]
Gain Band width
FT
25℃
-
2
-
MHz CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
THD
25℃
-
0.05
-
%
VOUT=0.8[Vp-p],
f=1[kHz]
CS
25℃
-
100
-
dB
AV=40[dB]
Supply Current (*9)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode Rejection Ratio
Power Supply Rejection Ratio
Input Common-mode Voltage Range
Phase Margin
Total Harmonic Distortion
Channel Separation
CL=25[pF], AV=40[dB]
(*8) Absolute value
(*9) Full range: BU7264: Ta=-40[℃] ~ +85[℃] BU7264S: Ta=-40[℃] ~ +105[℃]
(*10) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
5/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
○BU7295 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
BU7295HFV
BU7295SHFV
Temperature
Range
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*11)
Vio
25℃
-
1
6
mV
-
Input Offset Current (*11)
Iio
25℃
-
1
-
pA
-
Input Bias Current (*11)
Ib
25℃
-
1
-
pA
-
25℃
-
150
300
Full range
-
-
400
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=1.5[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
60
95
-
dB
RL=10[kΩ]
25℃
0
-
3
V
VDD-VSS=3[V]
CMRR
25℃
45
60
-
dB
-
PSRR
25℃
60
80
-
dB
-
Output Source Current (*13)
IOH
25℃
4
8
-
mA
VDD-0.4[V]
Output Sink Current (*13)
IOL
25℃
9
18
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
1.0
-
V/μs CL=25[pF]
Gain Band width
FT
25℃
-
1.0
-
MHz CL=25[pF], AV=40[dB]
θ
25℃
-
60
-
Supply Current (*12)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode Rejection Ratio
Power Supply Rejection Ratio
Input Common-mode Voltage Range
Phase Margin
°
CL=25[pF], AV=40[dB]
(*11) Absolute value
(*12) Full range: BU7295: Ta=-40[℃] ~ +85[℃] BU7295S: Ta=-40[℃] ~ +105[℃]
(*13) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
6/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
○BU7241 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
BU7241G,
BU7241SG
Temperature
Range
Min.
Typ.
Unit
Condition
Max.
25℃
-
1
9
Full range
-
-
10
Iio
25℃
-
1
-
pA
-
Ib
25℃
-
1
-
pA
-
25℃
-
70
150
Full range
-
-
250
Input Offset Voltage (*14)(*15)
Vio
Input Offset Current (*14)
Input Offset Current (*14)
mV
VDD=1.8 ~ 5.5[V]
VOUT=VDD/2
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=1.5[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
3
V
VDD-VSS=3[V]
CMRR
25℃
45
60
-
dB
-
PSRR
25℃
60
80
-
dB
-
Output Source Current (*16)
IOH
25℃
4
10
-
mA
VDD-0.4[V]
Output Sink Current (*16)
IOL
25℃
5
12
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
0.4
-
V/μs CL=25[pF]
Gain Band width
FT
25℃
-
0.9
-
MHz CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=0.8[Vp-p],
f=1[kHz]
Supply Current (*15)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode Rejection Ratio
Power Supply Rejection Ratio
Input Common-mode Voltage Range
Phase Margin
Total Harmonic Distortion
(*14) Absolute value
(*15) Full range: BU7241: Ta=-40[℃] ~ +85[℃] BU7241S: Ta=-40[℃] ~ +105[℃]
(*16) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
7/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
○BU7242 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
BU7242F/FVM/NUX
BU7242S F/FVM/NUX
Temperature
Range
Min.
Typ.
Unit
Condition
Max.
25℃
-
1
9
Full range
-
-
10
Iio
25℃
-
1
-
pA
-
Ib
25℃
-
1
-
pA
-
25℃
-
180
360
Full range
-
-
600
Input Offset Voltage (*17) (*18)
Vio
Input Offset Current (*17)
Input Bias Current (*17)
mV
VDD=1.8 ~ 5.5[V]
VOUT=VDD/2
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=1.5[V]
-
V
RL=10[kΩ]
-
VSS+0.1
V
RL=10[kΩ]
70
95
-
dB
RL=10[kΩ]
25℃
0
-
3
V
VDD-VSS=3[V]
CMRR
25℃
45
60
-
dB
-
PSRR
25℃
60
80
-
dB
-
Output Source Current (*19)
IOH
25℃
4
10
-
mA
VDD-0.4[V]
Output Sink Current (*19)
IOL
25℃
5
12
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
0.4
-
V/μs CL=25[pF]
Gain Band width
FT
25℃
-
0.9
-
MHz CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=0.8[Vp-p],
f=1[kHz]
CS
25℃
-
100
-
dB
AV=40[dB]
Supply Current (*18)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
Low Level Output Voltage
VOL
25℃
-
Large Signal Voltage Gain
AV
25℃
Vicm
Common-mode Rejection Ratio
Power Supply Rejection Ratio
Input Common-mode Voltage Range
Phase Margin
Total Harmonic Distortion
Channel Separation
(*17) Absolute value
(*18) Full range: BU7242: Ta=-40[℃] ~ +85[℃] BU7242S: Ta=-40[℃] ~ +105[℃]
(*19) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
8/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
○BU7244 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
BU7244F
BU7244SF
Temperature
Range
Min.
Typ.
Unit
Condition
Max.
25℃
-
1
9
Full range
-
-
10
Iio
25℃
-
1
-
pA
-
Ib
25℃
-
1
-
pA
-
25℃
-
360
750
Full range
-
-
1200
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=1.5[V]
Input Offset Voltage (*20) (*21)
Vio
Input Offset Current (*20)
Input Bias Current (*20)
mV
VDD=1.8 ~ 5.5[V]
VOUT=VDD/2
Supply Current (*21)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
-
V
RL=10[kΩ]
Low Level Output Voltage
VOL
25℃
-
-
VSS+0.1
V
RL=10[kΩ]
Large Signal Voltage Gain
AV
25℃
70
95
-
dB
RL=10[kΩ]
Vicm
25℃
0
-
3
V
VDD-VSS=3[V]
Common-mode Rejection Ratio
CMRR
25℃
45
60
-
dB
-
Power Supply Rejection Ratio
PSRR
25℃
60
80
-
dB
-
Output Source Current (*22)
IOH
25℃
4
10
-
mA
VDD-0.4[V]
Output Sink Current (*22)
IOL
25℃
5
12
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
0.4
-
V/μs CL=25[pF]
Gain Band width
FT
25℃
-
0.9
-
MHz CL=25[pF], AV=40[dB]
θ
25℃
-
50
-
°
CL=25[pF], AV=40[dB]
THD
25℃
-
0.05
-
%
VOUT=0.8[Vp-p],
f=1[kHz]
CS
25℃
-
100
-
dB
AV=40[dB]
Input Common-mode Voltage Range
Phase Margin
Total Harmonic Distortion
Channel Separation
(*20) Absolute value
(*21) Full range: BU7244: Ta=-40[℃] ~ +85[℃] BU7244S: Ta=-40[℃] ~ +105[℃]
(*22) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
9/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
○BU7275 family (Unless otherwise specified VDD=+3[V], VSS=0[V], Ta=25[℃])
Limits
Parameter
Symbol
BU7275HFV
BU7275SHFV
Temperature
Range
Min.
Typ.
Max.
Unit
Condition
Input Offset Voltage (*23)
Vio
25℃
-
1
6
mV
-
Input Offset Current (*23)
Iio
25℃
-
1
-
pA
-
Input Bias Current (*23)
Ib
25℃
-
1
-
pA
-
25℃
-
40
80
Full range
-
-
130
μA
RL=∞ All Op-Amps
AV=0[dB], VIN=1.5[V]
Supply Current (*24)
IDD
High Level Output Voltage
VOH
25℃
VDD-0.1
-
-
V
RL=10[kΩ]
Low Level Output Voltage
VOL
25℃
-
-
VSS+0.1
V
RL=10[kΩ]
Large Signal Voltage Gain
AV
25℃
60
95
-
dB
RL=10[kΩ]
Vicm
25℃
0
-
3
V
VDD-VSS=3[V]
Common-mode Rejection Ratio
CMRR
25℃
45
60
-
dB
-
Power Supply Rejection Ratio
PSRR
25℃
60
80
-
dB
-
Output Source Current (*25)
IOH
25℃
4
8
-
mA
VDD-0.4[V]
Output Sink Current (*25)
IOL
25℃
9
18
-
mA
VSS+0.4[V]
Slew Rate
SR
25℃
-
0.3
-
V/μs
CL=25[pF]
Gain Band width
FT
25℃
-
0.6
-
MHz
CL=25[pF], AV=40[dB]
θ
25℃
-
60
-
°
CL=25[pF], AV=40[dB]
Input Common-mode Voltage Range
Phase Margin
(*23) Absolute value
(*24) Full range: BU7275: Ta=-40[℃] ~ +85[℃] BU7275S: Ta=-40[℃] ~ +105[℃]
(*25) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
10/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Reference Data (BU7261 family)
BU7261 family
POWER DISSIPATION [mW] .
400
200
BU7261SG
400
200
0
0
85 100
50
AMBIENT TEMPERATURE [℃]
0
150
0
Fig.1
600
5.5V
1.8V
200
150
4
85℃
25℃
3
-40℃
2
1
3
4
5
SUPPLY VOLTAGE [V]
10
25℃
5
-40℃
3
4
5
SUPPLY VOLTAGE [V]
5.5V
10
3.0V
1.8V
5
1.8V
5
0
30
60
90
60
90
120
120
BU7261 family
-40℃
25℃
30
20
85℃
105℃
10
0
0.5
25℃
40
85℃
105℃
20
0.5
1.0
1.5
1.5
2
2.5
3
Fig.9
Output Source Current – Output Voltage
(VDD=3[V])
-40℃
60
1
OUTPUT VOLTAGE [V]
BU7261 family
80
0.0
90
40
120
0
AMBIENT TEMPERATURE [℃]
60
0
-30
2.0
2.5
3.0
OUTPUT VOLTAGE [V]
BU7261 family
40
OUTPUT SINK CURRENT [mA]
10
30
50
Fig.8
Output Voltage Low – Ambient Temperature
OUTPUT SINK CURRENT
OUTPUT SOURCE CURRENT [mA]
3.0V
0
(RL=10[kΩ])
BU7261 family
5.5V
30
-30
Output Voltage High – Ambient Temperature
(RL=10[kΩ])
15
0
1
AMBIENT TEMPERATURE [℃]
15
0
-60
BU7261 family
-30
1.8V
2
AMBIENT TEMPERATURE [℃]
(RL=10[kΩ])
0
-60
3.0V
3
Fig.6
20
6
Fig.7
Output Voltage Low – Supply Voltage
20
4
Fig.5
0
2
5.5V
-60
OUTPUT SOURCE CURRENT [mA]
85℃
BU7261 family
6
6
Output Voltage High – Supply Voltage
OUTPUT VOLTAGE LOW [mV]
OUTPUT VOLTAGE LOW [mV]
105℃
6
0
2
(RL=10[kΩ])
15
3
4
5
SUPPLY VOLTAGE [V]
5
105℃
1
BU7261 family
20
2
Fig.3
Supply Current – Supply Voltage
5
120
-40℃
1
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Fig.4
Supply Current – Ambient Temperature
1
200
BU7261 family
6
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [μA]
800
0
-60
25℃
Derating curve
BU7261 family
3.0V
400
Fig.2
1000
400
85℃
AMBIENT TEMPERATURE [℃]
Derating curve
105℃
600
0
100105
50
800
SUPPLY CURRENT [µA]
BU7261G
600
BU7261 family
1000
OUTPUT VOLTAGE HIGH [V]
POWER DISSIPATION [mW] .
600
BU7261 family
800
800
30
5.5V
20
3.0V
10
1.8V
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.10
Output Source Current – Ambient Temperature
Fig.11
Output Sink Current – Output Voltage
Fig.12
Output Sink Current – Ambient Temperature
(VOUT=VDD-0.4[V])
(VDD=3[V])
(VOUT=VSS+0.4[V])
(*) The above data is ability value of sample, it is not guaranteed. BU7261G: -40[℃] ~ +85[℃] BU7261SG: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
11/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
BU7261 family
25℃
5.0
-40℃
2.5
0.0
85℃
105℃
-2.5
-5.0
-7.5
-10.0
5.0
5.5V
2.5
0.0
-2.5
3.0V
1.8V
-5.0
-7.5
2
3
4
5
6
-60
SUPPLY VOLTAGE [V]
-30
0
30
60
90
120
105℃
80
60
140
120
5.5V
3
4
5
-60
SUPPLY VOLTAGE [V]
POWER SUPPLY REJECTION RATIO [dB]
100
5.5V
80
60
3.0V
1.8V
40
20
0
-60
-30
0
30
60
30
60
90
90
120
85℃
60
-40℃
20
0
3
4
5
SUPPLY VOLTAGE [V]
6
BU7261 family
5
80
60
40
4
5.5V
3
2
1
1.8V
20
3.0V
0
-30
0
30
60
90
-60
120
AMBIENT TEMPERATURE [℃]
Fig.20
Power Supply Rejection Ratio
– Ambient Temperature
BU7261 family
2
Fig.18
Common Mode Rejection Ratio
– Supply Voltage
100
Fig.19
Common Mode Rejection Ratio
– Ambient Temperature
25℃
40
1
120
0
-60
120
105℃
80
120
BU7261 family
140
AMBIENT TEMPERATURE [℃]
2.5
0
90
100
Fig.17
Large Signal Voltage Gain
– Ambient Temperature
BU7261 family
120
-30
60
BU7261 family
AMBIENT TEMPERATURE [℃]
Fig.16
Large Signal Voltage Gain
– Supply Voltage
COMMON MODE REJECTION RATIO [dB]
3.0V
80
6
30
120
SLEW RATE L-H [V/µs]
2
0
(VDD=3[V])
1.8V
100
-30
Fig.15
Input Offset Voltage – Ambient Temperature
60
1
-7.5
COMMON MODE REJECTION RATIO [dB]
25℃
25℃
-5.0
BU7261 family
160
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIGNAL VOLTAGE GAIN [dB]
140
85℃
-40℃
AMBIENT TEMPERATURE [℃]
(Vicm=VDD, VOUT=1.5[V])
BU7261 family
105℃
0.0
-2.5
-60
(Vicm=VDD, VOUT=1.5[V])
100
85℃
2.5
AMBIENT TEMPERATURE [℃]
Fig.14
Input Offset Voltage – Ambient Temperature
-40℃
5.0
120
Fig.13
Input Offset Voltage – Supply Voltage
160
7.5
-10.0
-10.0
1
BU7261 family
10.0
7.5
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
7.5
BU7261 family
10.0
INPUT OFFSET VOLTAGE [mV]
10.0
Technical Note
BU7261 family
100
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
Fig.21
Slew Rate L-H – Ambient Temperature
200
80
5.5V
1.5
1.0
150
60
40
100
Gain
3.0V
1.8V
0.5
50
20
0.0
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
PHASE [deg]
2.0
GAIN[dB]
SLEW RATE H-L [V/μs]
Phase
0
1.E+00 1.E+01 1.E+02 1.E+03
1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.22
Fig.23
Slew Rate H-L – Ambient Temperature
Voltage Gain – Frequency
(*) The above data is ability value of sample, it is not guaranteed. BU7261G: -40[℃] ~ +85[℃] BU7261SG: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
12/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Reference Data (BU7262 family)
BU7262 family
BU7262FVM
600
BU7262NUX
400
200
800
BU7262SF
BU7262SFVM
600
BU7262SNUX
400
200
0
0
85 100
50
150
0
AMBIENT TEMPERATURE [℃]
5.5V
3.0V
600
300
1.8V
105℃
4
85℃
25℃
3
-40℃
2
1
105℃
10
25℃
-40℃
0
3
4
5
SUPPLY VOLTAGE [V]
3
4
5
SUPPLY VOLTAGE [V]
5
5.5V
4
3.0V
3
1.8V
2
1
6
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃ ]
(RL=10[kΩ])
(RL=10[kΩ])
BU7262 family
15
5.5V
1.8V
10
5
3.0V
BU7262 family
50
-40℃
40
25℃
30
20
105℃
85℃
10
0
-30
0
30
60
90
0
120
0.5
1.5
2
2.5
3
Fig.32
Output Source Current – Output Voltage
(VDD=3.0[V])
(RL=10[kΩ])
BU7262 family
80
1
OUTPUT VOLTAGE [V]
Fig.31
Output Voltage Low – Ambient Temperature
BU7262 family
120
Fig.29
Output Voltage High – Ambient Temperature
(RL=10[kΩ])
20
6
BU7262 family
6
AMBIENT TEMPERATURE [℃]
Fig.30
Output Voltage Low – Supply Voltage
5
Fig.28
Output Voltage High – Supply Voltage
0
-60
6
4
0
2
20
OUTPUT VOLTAGE LOW [mV]
BU7262 family
40
OUTPUT SINK CURRENT [mA]
5.5V
15
3.0V
10
1.8V
5
0
-60
OUTPUT SINK CURRENT [mA]
OUTPUT VOLTAGE LOW [mV]
20
OUTPUT SOURCE CURRENT [mA]
3
Supply Current – Supply Voltage
BU7262 family
1
BU7262 family
2
2
SUPPLY VOLTAGE [V]
5
120
Fig.27
Supply Current – Ambient Temperature
1
1
150
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
5
-40℃
Fig.26
6
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [μA]
1200
85℃
400
Derating curve
BU7262 family
15
25℃
800
Fig.25
1500
0
-60
1200
AMBIENT TEMPERATURE [℃]
Fig.24
Derating curve
900
105℃
85℃
0
100105
50
1600
OUTPUT VOLTAGE HIGH [V]
0
SUPPLY CURRENT [µA]
BU7262F
BU7262 family
2000
OUTPUT SOURCE CURRENT [mA]
800
BU7262 family
1000
POWER DISSIPATION [mW] .
POWER DISSIPATION [mW] .
1000
-40℃
60
25℃
40
85℃
20
105℃
0
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
OUTPUT VOLTAGE [V]
Fig.33
Output Source Current – Ambient Temperature
Fig.34
Output Sink Current – Output Voltage
(VOUT=VDD-0.4[V])
(VDD=3[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7262F/FVM/NUX: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
13/36
5.5V
30
20
3.0V
10
0
-60
1.8V
-30
0
30
60
90
120
AMBIENT TEMPERATURE[℃]
Fig.35
Output Sink Current – Ambient Temperature
(VOUT=VSS+0.4[V])
BU7262S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
BU7262 family
25℃
-40℃
2.5
0.0
-2.5
85℃
105℃
-5.0
-7.5
5.0
2.5
0.0
3.0V
-5.0
-7.5
2
3
4
5
SUPPLY VOLTAGE[V]
6
Fig.36
Input Offset Voltage – Supply Voltage
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
85℃
120
100
-40℃
80
2
3
4
5
SUPPLY VOLTAGE [V]
140
1.8V
120
100
3.0V
5.5V
80
-60
6
80
3.0V
1.8V
40
20
0
-60
-30
0
30
60
-30
0
30
60
90
120
90
120
4
BU7262 family
120
25℃
-40℃
100
80
60
105℃
85℃
40
20
0
1
2
3
4
5
SUPPLY VOLTAGE [V]
6
Fig.41
Common Mode Rejection Ratio
– Supply Voltage
BU7262 family
140
BU7262 family
5
120
100
80
60
40
20
5.5V
3
2
3.0V
1
0
-30
0
30
60
90
120
-60
AMBIENT TEMPERATURE [℃]
Fig.42
Common Mode Rejection Ratio
– Ambient Temperature
4
1.8V
0
-60
AMBIENT TEMPERATURE [℃]
Fig.43
Power Supply Rejection Ratio
– Ambient Temperature
BU7262 family
2.5
1
2
3
INPUT VOLTAGE [V]
(VDD=3[V])
SLEW RATE L-H [V/μs]
POWER SUPPLY REJECTION RATIO [dB]
5.5V
60
0
Fig.38
Input Offset Voltage – Input Voltage
Fig.40
Large Signal Voltage Gain
– Ambient Temperature
BU7262 family
100
-10
AMBIENT TEMPERATURE [℃]
Fig.39
Large Signal Voltage Gain
– Supply Voltage
120
85℃ 105℃
-5
-1
60
60
1
0
120
BU7262 family
160
LARGE SIGNAL VOLTAGE GAIN [dB]
140
25℃
25℃
(Vicm=VDD, VOUT=1.5[V])
BU7262 family
105℃
-40℃
5
Fig.37
Input Offset Voltage – Ambient Temperature
(Vicm=VDD,VOUT=1.5[V])
160
10
-15
-60
COMMON MODE REJECTION RATIO [dB]
1
COMMON MODE REJECTION RATIO [dB]
1.8V
-10.0
-10.0
LARGE SIGNAL VOLTAGE GAIN [dB]
5.5V
-2.5
BU7262 family
15
7.5
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
7.5
5.0
BU7262 family
10.0
INPUT OFFSET VOLTAGE [mV]
10.0
Technical Note
BU7 mily
100
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
Fig.44
Slew Rate L-H – Ambient Temperature
200
Phase
80
1.5
3.0V
1.0
1.8V
0.5
60
100
40
Gain
50
20
0.0
0
-60
-30
0
30
60
90
120
PHASE [deg]
150
5.5V
GAIN [dB]
SLEW RATE H-L [V/μs]
2.0
0
1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
AMBIENT TEMPERATURE [℃]
FREQUENCY [Hz]
Fig.45
Slew Rate H-L – Ambient Temperature
Voltage Gain – Frequency
Fig.46
(*)The above data is ability value of sample, it is not guaranteed. BU7262F/FVM/NUX: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
14/36
BU7262S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Reference Data (BU7264 family)
BU7264 family
BU7264 family
1000
BU7264F
600
400
200
2500
800
SUPPLY CURRENT [µA]
800
BU7264 family
3000
105℃
POWER DISSIPATION [mW] .
POWER DISSIPATION [mW] .
1000
BU7264SF
600
400
200
85℃
2000
1500
25℃
1000
500
-40℃
0
0
85 100
50
150
0
AMBIENT TEMPERATURE [℃]
50
BU7264 family
OUTPUT VOLTAGE HIGH [V]
5.5V
3.0V
1000
1.8V
105℃
85℃
3.0
-40℃
2.0
105℃
5
25℃
-40℃
2
3
4
5
SUPPLY VOLTAGE [V]
1.8V
2
1
-30
0
60
90
120
Fig.52
Output Voltage High – Ambient Temperature
1.8V
5
3.0V
BU7264 family
50
-40℃
40
25℃
30
20
105℃
85℃
10
0
-30
0
30
60
90
0
120
0.5
1
2
2.5
3
Fig.55
Output Source Current – Output Voltage
(RL=10[kΩ])
(VDD=3[V])
BU7264 family
80
1.5
OUTPUT VOLTAGE [V]
Fig.54
Output Voltage Low – Ambient Temperature
BU7264 family
30
(RL=10[kΩ])
5.5V
5.5V
BU7264 family
40
-40℃
OUTPUT SINK CURRENT [mA]
OUTPUT SOURCE CURRENT [mA]
3.0V
3
AMBIENT TEMPERATURE [℃]
10
(RL=10[kΩ])
20
15
3.0V
10
1.8V
5
60
25℃
40
105℃
85℃
20
0
0
5.5V
4
AMBIENT TEMPERATURE [℃]
Fig.53
Output Voltage Low – Supply Voltage
-30
5
-60
6
BU7264 family
0
-60
6
6
BU7264 family
(RL=10[kΩ])
0
5
6
OUTPUT SOURCE CURRENT [mA]
85℃
3
4
5
SUPPLY VOLTAGE [V]
15
OUTPUT VOLTAGE LOW [mV]
10
2
Fig.51
Output Voltage High – Supply Voltage
BU7264 family
15
4
0
1
Supply Current – Ambient Temperature
0
-60
25℃
1.0
120
Fig.50
OUTPUT VOLTAGE LOW [mV]
5.0
4.0
3
Fig.49
Supply Current – Supply Voltage
0.0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
2
SUPPLY VOLTAGE [V]
OUTPUT SINK CURRENT [mA]
SUPPLY CURRENT [μA]
2000
1
1
BU7264 family
6.0
2500
0
-60
150
Fig.48
Derating curve
3000
500
0
AMBIENT TEMPERATURE [℃]
Fig.47
Derating curve
1500
105
100
OUTPUT VOLTAGE HIGH [V]
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
OUTPUT VOLTAGE [V]
5.5V
30
20
3.0V
10
1.8V
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE[℃]
Fig.56
Output Source Current – Ambient Temperature
Fig.57
Output Sink Current – Output Voltage
Fig.58
Output Sink Current – Ambient Temperature
(VOUT=VDD-0.4[V])
(VDD=3[V])
(VOUT=VSS+0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7264F: -40[℃] ~ +85[℃] BU7264SF: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
15/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
BU7264 family
5.0
2.5
105℃
25℃
0.0
-2.5
85℃
-5.0
-40℃
-7.5
5.5V
0.0
-2.5
-5.0
1
2
3
4
5
INPUT VOLTAGE [V]
3.0V
-7.5
-30
0
30
60
90
100
105℃
60
40
20
0
140
1.8V
3.0V
5.5V
120
100
80
60
3
4
5
SUPPLY VOLTAGE [V]
6
-60
POWER SUPPLY REJECTION RATIO [dB]
100
3.0V
80
60
40
1.8V
20
0
-60
-30
0
30
60
90
-30
0
30
60
90
100
120
25℃
60
20
0
120
1
3
4
5
SUPPLY VOLTAGE [V]
6
BU7264 family
5
80
60
40
4
5.5V
3
2
3.0V
1
20
1.8V
0
-30
0
30
60
90
120
-60
AMBIENT TEMPERATURE [℃]
Fig.66
Power Supply Rejection Ratio
– Ambient Temperature
BU7264 family
2
Fig.64
Common Mode Rejection Ratio
– Supply Voltage
100
Fig.65
Common Mode Rejection Ratio
– Ambient Temperature
105℃
85℃
40
120
0
-60
4
-40℃
80
BU7264 family
140
AMBIENT TEMPERATURE [℃]
3.0
1
2
3
INPUT VOLTAGE [V]
BU7264 family
Fig.63
Large Signal Voltage Gain
– Ambient Temperature
BU7264 family
5.5V
0
120
AMBIENT TEMPERATURE [℃]
Fig.62
Large Signal Voltage Gain
– Supply Voltage
120
-10
SLEW RATE L-H [V/μs]
2
25℃
-40℃
(VDD=3[V])
COMMON MODE REJECTION RATIO [dB]
25℃
120
105℃
Fig.61
Input Offset Voltage – Input Voltage
BU7264 family
160
LARGE SIGNAL VOLTAGE GAIN [dB]
-40℃
1
-5
-1
(Vicm=VDD,VOUT=1.5[V])
BU7264 family
80
85℃
0
AMBIENT TEMPERATURE [℃]
(Vicm=VDD,VOUT=1.5[V])
85℃
5
120
Fig.60
Input Offset Voltage – Ambient Temperature
140
10
-15
-60
6
Fig.59
Input Offset Voltage – Supply Voltage
160
COMMON MODE REJECTION RATIO [dB]
1.8V
-10.0
-10.0
LARGE SIGNAL VOLTAGE GAIN [dB]
5.0
2.5
BU7264 family
15
7.5
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
7.5
BU7264 family
10.0
INPUT OFFSET VOLTAGE [mV]
10.0
Technical Note
BU7264 family
100
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
Fig.67
Slew Rate L-H – Ambient Temperature
200
Phase
80
5.5V
1.5
3.0V
150
60
100
40
Gain
1.0
50
20
0.5
PHASE [deg]
2.0
GAIN [dB]
SLEW RATE H-L [V/μs]
2.5
1.8V
0
0.0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.68
Slew Rate H-L – Ambient Temperature
0
1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.69
Voltage Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7264F: -40[℃] ~ +85[℃] BU7264SF: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
16/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Reference Data (BU7295 family)
BU7295 family
BU7295HFV
600
400
200
0
250
800
BU7295SHFV
600
400
200
150
100 105
50
Fig.70
3.0V
150
100
1.8V
50
105℃
4.0
85℃
25℃
3.0
-40℃
2.0
1.0
3
4
5
SUPPLY VOLTAGE [V]
3
4
5
SUPPLY VOLTAGE [V]
15
10
5.5V
5
3.0V
1.8V
0
-60
6
-30
0
30
60
90
90
120
40
25℃
-40℃
30
20
10
105℃
85℃
0.5
-40℃
60
25℃
40
105℃
85℃
20
1
1.5
2
2.5
3
OUTPUT VOLTAGE [V]
Fig.78
Output Source Current – Output Voltage
(VDD=3[V])
BU7295 family
50
OUTPUT SINK CURRENT [mA]
1.8V
60
BU7295 family
0
BU7295 family
80
OUTPUT SINK CURRENT [mA]
3.0V
30
50
120
(RL=10[kΩ])
5.5V
0
(RL=10[kΩ])
AMBIENT TEMPERATURE [℃]
BU7295 family
5
1
0
-30
(RL=10[kΩ])
10
1.8V
2
Fig.75
Output Voltage High – Ambient Temperature
BU7295 family
Fig.77
Output Voltage Low – Ambient Temperature
15
3.0V
3
AMBIENT TEMPERATURE [℃]
Fig.76
Output Voltage Low – Supply Voltage
20
5.5V
4
-60
6
25℃
2
5
(RL=10[kΩ])
0
6
BU7295 family
6
OUTPUT SOURCE CURRENT [mA]
105℃
85℃
-40℃
5
2
Fig.74
Output Voltage High – Supply Voltage
BU7295 family
10
3
4
5
SUPPLY VOLTAGE [V]
0
1
OUTPUT VOLTAGE LOW [mV]
OUTPUT VOLTAGE LOW [mV]
BU7295 family
5.0
120
Fig.73
15
2
Fig.72
Supply Current – Supply Voltage
0.0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
Supply Current – Ambient Temperature
OUTPUT SOURCE CURRENT [mA]
1
150
OUTPUT VOLTAGE HIGH [V]
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [μA]
5.5V
-40℃
25℃
Derating curve
6.0
250
1
50
Fig.71
BU7295 family
0
-60
100
AMBIENT TEMPERATURE [℃]
Derating curve
200
150
0
0
AMBIENT TEMPERATURE [℃]
300
105℃
85℃
200
0
85 100
50
BU7295 family
300
SUPPLY CURRENT [µA]
800
0
BU7295 family
1000
POWER DISSIPATION [mW] .
POWER DISSIPATION [mW] .
1000
40
5.5V
30
20
3.0V
10
1.8V
0
-60
0
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
OUTPUT VOLTAGE [V]
Fig.79
Output Source Current – Ambient Temperature
Fig.80
Output Sink Current – Output Voltage
(VOUT=VDD-0.4[V])
(VDD=3[V])
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE[℃]
Fig.81
Output Sink Current – Ambient Temperature
(VOUT=VSS+0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7295HFV: -40[℃] ~ +85[℃] BU7295SHFV: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
17/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
BU7295 family
6
4
25℃
105℃
2
0
-2
-4
-40℃
7.5
85℃
-6
5.0
5.5V
2.5
0.0
-2.5
-5.0
-7.5
-8
2
3
4
5
INPUT VOLTAGE [V]
-60
6
85℃
80
0
30
60
90
105℃
60
40
20
3
4
5
SUPPLY VOLTAGE [V]
140
3.0V
1.8V
5.5V
120
100
80
-60
6
POWER SUPPLY REJECTION RATIO [dB]
100
3.0V
5.5V
80
60
1.8V
40
20
0
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
-30
0
30
60
90
1
2
3
INPUT VOLTAGE [V]
120
BU7295 family
105℃
100
85℃
80
60
-40℃
20
0
1
2
3
4
5
SUPPLY VOLTAGE [V]
6
Fig.87
Common Mode Rejection Ratio
– Supply Voltage
BU7295 family
3.0
2.5
100
80
60
40
2.0
5.5V
1.5
3.0V
1.0
1.8V
0.5
20
0.0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
-60
120
Fig.89
Power Supply Rejection Ratio
– Ambient Temperature
BU7295 family
25℃
40
120
120
0
-60
4
(VDD=3[V])
BU7295 family
140
Fig.88
Common Mode Rejection Ratio
– Ambient Temperature
3.0
0
120
Fig.86
Large Signal Voltage Gain
– Ambient Temperature
BU7295 family
105℃
-6
AMBIENT TEMPERATURE [℃]
Fig.85
Large Signal Voltage Gain
– Supply Voltage
120
85℃
-4
Fig.84
Input Offset Voltage – Input Voltage
SLEW RATE L-H [V/µs]
2
-2
-1
60
0
1
25℃
0
120
BU7295 family
160
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIGNAL VOLTAGE GAIN [dB]
25℃
120
100
2
(Vicm=VDD,VOUT=1.5[V])
BU7295 family
140
-30
Fig.83
Input Offset Voltage – Ambient Temperature
(Vicm=VDD,VOUT=1.5[V])
-40℃
-40℃
4
AMBIENT TEMPERATURE [℃]
Fig.82
Input Offset Voltage – Supply Voltage
160
6
-10
COMMON MODE REJECTION RATIO [dB]
1
8
-8
-10.0
-10
COMMON MODE REJECTION RATIO [dB]
3.0V
1.8V
BU7295 family
10
INPUT OFFSET VOLTAGE [mV]
8
BU7295 family
10.0
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
10
Technical Note
BU7295 family
100
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
Fig.90
Slew Rate L-H – Ambient Temperature
200
Phase
80
150
2.0
5.5V
1.5
1.0
PHASE [deg]
3.0V
GAIN [dB]
SLEW RATE H-L [V/μs]
2.5
60
40
100
Gain
1.8V
50
20
0.5
0.0
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.91
Slew Rate H-L – Ambient Temperature
0
1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.92
Voltage Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7295HFV: -40[℃] ~ +85[℃] BU7295SHFV: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
18/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Reference Data (BU7241 family)
BU7241 family
BU7241G
400
200
0
85
50
150
Fig.93
Derating curve
Fig.94
Derating curve
1.8V
50
-30
0
30
60
90
5
-40℃
20
10
105℃
2
1
2
3
4
5
SUPPLY VOLTAGE [V]
2
1.8V
5
30
60
90
3.0V
3
1.8V
2
1
0
-60
6
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
AMBIENT TEMPERATURE [℃]
120
(RL=10[kΩ])
(RL=10[kΩ])
BU7241 family
50
40
5.5V
30
3.0V
20
10
BU7241 family
50
40
-40℃
25℃
30
20
85℃
105℃
10
0
-30
0
30
60
90
0
120
0.5
1
1.5
2
2.5
OUTPUT VOLTAGE [V]
3
(RL=10[kΩ])
(VDD=3[V])
BU7241 family
80
70
60
50
25℃
85℃
40
30
20
-40℃
10
105℃
0
0
4
Fig.101
Output Source Current – Output Voltage
OUTPUT SINK CURRENT [mA]
OUTPUT SOURCE CURRENT [mA]
10
-30
5.5V
Fig.100
Output Voltage Low – Ambient Temperature
BU7241 family
3.0V
0
-60
5
Fig.98
Output Voltage High – Ambient Temperature
(RL=10[kΩ])
15
6
BU7241 family
AMBIENT TEMPERATURE [℃]
5.5V
3
4
5
SUPPLY VOLTAGE [V]
Fig.97
Output Voltage High – Supply Voltage
0
-60
6
Fig.99
Output Voltage Low – Supply Voltage
20
3
4
5
SUPPLY VOLTAGE [V]
1.8V
85℃
0
-40℃
60
OUTPUT VOLTAGE LOW [mV]
OUTPUT VOLTAGE LOW [mV]
25℃
30
25℃
1
BU7241 family
40
85℃
3
2
6
0
Fig.96
Supply Current – Ambient Temperature
50
105℃
4
SUPPLY VOLTAGE [V]
60
BU7241 family
6
120
-40℃
50
Fig.95
Supply Current – Supply Voltage
OUTPUT VOLTAGE HIGH [V]
3.0V
100
25℃
100
1
OUTPUT SOURCE CURRENT [mA]
5.5V
150
105℃
85℃
150
150
AMBIENT TEMPERATURE [℃]
200
1
100105
50
AMBIENT TEMPERATURE [℃]
BU7241 family
200
0
0
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [μA]
200
0
100
250
0
-60
BU7241SG
400
0.0
0.5
1.0
1.5
2.0
2.5
3.0
OUTPUT VOLTAGE [V]
BU7241 family
40
OUTPUT SINK CURRENT [mA]
0
600
BU7241 family
250
SUPPLY CURRENT [μA]
600
BU7241 family
800
POWER DISSIPATION [mW] .
POWER DISSIPATION [mW] .
800
30
20
5.5V
3.0V
10
1.8V
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.102
Output Source Current – Ambient Temperature
Fig.103
Output Sink Current – Output Voltage
Fig.104
Output Sink Current – Ambient Temperature
(VOUT=VDD-0.4[V])
(VDD=3[V])
(VOUT=VSS+0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7241G: -40[℃] ~ +85[℃] BU7241SG: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
19/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
BU7241 family
5.0
-40℃
25℃
2.5
0.0
105℃
-2.5
85℃
-5.0
-7.5
5.0
5.5V
2.5
0.0
-2.5
-5.0
-7.5
-10.0
-10.0
2
3
4
5
Fig.105
Input Offset Voltage – Supply Voltage
BU7241 family
120
25℃
-40℃
100
-30
0
30
60
80
90
-1
2
3
4
5
SUPPLY VOLTAGE [V]
140
3.0V
5.5V
120
100
1.8V
80
-60
6
POWER SUPPLY REJECTION RATIO [dB]
5.5V
80
60
3.0V
1.8V
40
20
0
-60
-30
0
30
60
-30
0
30
60
90
105℃
85℃
80
60
20
0
1
2
90
120
2.5
90
60
30
2.0
1.5
5.5V
1.0
0.5
3.0V
1.8V
0.0
-30
0
30
60
90
Fig.111
Common Mode Rejection Ratio
– Ambient Temperature
Fig.112
Power Supply Rejection Ratio
– Ambient Temperature
BU7241 family
100
-60
120
AMBIENT TEMPERATURE [℃]
BU7241 family
6
BU7241 family
3.0
120
0
-60
3
4
5
SUPPLY VOLTAGE [V]
Fig.110
Common Mode Rejection Ratio
– Supply Voltage
BU7241 family
150
25℃
-40℃
40
120
AMBIENT TEMPERATURE [℃]
2.0
100
Fig.109
Large Signal Voltage Gain
– Ambient Temperature
100
4
BU7241 family
120
AMBIENT TEMPERATURE [℃]
BU7241 family
1
2
3
INPUT VOLTAGE [V]
(VDD=3[V])
BU7241 family
Fig.108
Large Signal Voltage Gain
– Supply Voltage
120
0
(Vicm=VDD, VOUT=1.5[V])
SLEW RATE L-H [V/μs]
1
-10
120
60
60
25℃
-40℃
-5
Fig.107
Input Offset Voltage – Input Voltage
160
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIGNAL VOLTAGE GAIN [dB]
105℃
85℃
105℃
85℃
0
Fig.106
Input Offset Voltage – Ambient Temperature
(Vicm=VDD, VOUT=1.5[V])
140
5
AMBIENT TEMPERATURE [℃]
SUPPLY VOLTAGE [V]
160
10
-15
-60
6
COMMON MODE REJECTION RATIO [dB]
1
COMMON MODE REJECTION RATIO [dB]
3.0V
1.8V
BU7241 family
15
7.5
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
7.5
BU7241 family
10.0
INPUT OFFSET VOLTAGE [mV]
10.0
Technical Note
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.113
Slew Rate L-H – Ambient Temperature
200
80
1.0
5.5V
150
60
100
40
Gain
0.5
50
20
3.0V
PHASE [deg]
1.5
GAIN [dB]
SLEW RATE H-L [V/μs]
Phase
1.8V
0.0
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.114
Slew Rate H-L – Ambient Temperature
0
1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY[Hz]
Fig.115
Voltage Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7241G: -40[℃] ~ +85[℃] BU7241SG: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
20/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Reference Data (BU7242 family)
BU7242 family
BU7242F
BU7242FVM
600
BU7242NUX
400
200
BU7242 family
500
105℃
800
SUPPLY CURRENT [µA]
800
BU7242 family
1000
POWER DISSIPATION [mW] .
POWER DISSIPATION [mW] .
1000
BU7242SF
BU7242SFVM
600
BU7242SNUX
400
200
400
85℃
300
25℃
200
100
-40℃
0
85 100
50
AMBIENT TEMPERATURE [℃]
0
150
0
50
100
AMBIENT TEMPERATURE [℃]
Fig.116
Derating curve
400
5.5V
1.8V
200
0
-60
105℃
5
85℃
4
25℃
3
-40℃
2
1
Fig.119
Supply Current – Ambient Temperature
2
3
4
5
SUPPLY VOLTAGE [V]
6
BU7242 family
5
5.5V
4
3.0V
3
1.8V
2
1
-60
-30
0
40
105℃
30
85℃
20
10
50
40
30
20
5.5V
3.0V
1.8V
10
25℃
-40℃
1
2
3
4
5
SUPPLY VOLTAGE [V]
0
-60
6
-30
0
Fig.122
Output Voltage Low – Supply Voltage
BU7242 family
OUTPUT SINK CURRENT [mA]
OUTPUT SOURCE CURRENT [mA]
5.5V
15
3.0V
10
1.8V
5
0
30
60
90
90
30
25℃
20
120
AMBIENT TEMPERATURE [℃]
Fig.125
Output Source Current – Ambient Temperature
(VOUT=VDD-0.4[V])
10
0
120
0
www.rohm.com
0.5
1
1.5
2
2.5
3
OUTPUT VOLTAGE [V]
(RL=10[kΩ])
(VDD=3[V])
BU7242 family
60
85℃
25℃
40
20
105℃
-40℃
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
OUTPUT VOLTAGE [V]
Fig.126
Output Sink Current – Output Voltage
(VDD=3[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7242F/FVM/NUX: -40[℃] ~ +85[℃]
© 2010 ROHM Co., Ltd. All rights reserved.
85℃
105℃
Fig.124
Output Source Current – Output Voltage
80
20
-30
60
-40℃
Fig.123
Output Voltage Low – Ambient Temperature
(RL=10[kΩ])
0
-60
30
40
AMBIENT TEMPERATURE [℃]
21/36
BU7242 family
40
OUTPUT SINK CURRENT [mA]
0
120
BU7242 family
50
OUTPUT SOURCE CURRENT [mA]
OUTPUT VOLTAGE LOW [mV]
OUTPUT VOLTAGE LOW [mV]
50
90
(RL=10[kΩ])
BU7242 family
60
60
Fig.121
Output Voltage High – Ambient Temperature
(RL=10[kΩ])
60
30
AMBIENT TEMPERATURE [℃]
Fig.120
Output Voltage High – Supply Voltage
BU7242 family
6
0
1
120
3
4
5
SUPPLY VOLTAGE [V]
6
0
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
2
Fig.118
Supply Current – Supply Voltage
BU7242 family
6
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [µA]
600
3.0V
1
Fig.117
Derating curve
BU7242 family
800
0
150
OUTPUT VOLTAGE HIGH [V]
0
105
30
5.5V
20
3.0V
10
1.8V
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE[℃]
Fig.127
Output Sink Current – Ambient Temperature
(VOUT=VSS+0.4[V])
BU7242S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
BU7242 family
5.0
25℃
-40℃
2.5
0.0
105℃
85℃
-2.5
-5.0
-7.5
-10.0
2.5
0.0
-2.5
1.8V
-5.0
-7.5
-10.0
2
3
4
5
6
SUPPLY VOLTAGE[V]
105℃
120
100
25℃
-30
0
30
60
90
-40℃
60
2
3
4
5
6
100
80
1.8V
5.5V
60
40
20
-60
3.0V
1.8V
40
20
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
60
90
105℃
60
25℃
-40℃
40
20
0
1
2
3
4
5
SUPPLY VOLTAGE [V]
6
Fig.133
Common Mode Rejection Ratio
– Supply Voltage
BU7242 family
3.0
2.5
120
90
60
2.0
5.5V
1.5
1.0
3.0V
0.5
30
1.8V
0
-60
0.0
-30
0
30
60
90
-60
120
AMBIENT TEMPERATURE [℃]
Fig.135
BU7242 family
100
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
Fig.136
Power Supply Rejection Ratio
– Ambient Temperature
BU7242 family
85℃
80
120
BU7242 family
150
Fig.134
Common Mode Rejection Ratio
– Ambient Temperature
2.0
30
SLEW RATE L-H [V/µs]
80
POWER SUPPLY REJECTION RATIO [dB]
5.5V
0
0
4
BU7242 family
100
Fig.132
Large Signal Voltage Gain
– Ambient Temperature
100
-30
-30
1
2
3
INPUT VOLTAGE [V]
120
AMBIENT TEMPERATURE [℃]
BU7242 family
-60
0
(VDD=3[V])
120
Fig.131
Large Signal Voltage Gain
– Supply Voltage
60
-10
Fig.130
Input Offset Voltage – Input Voltage
3.0V
SUPPLY VOLTAGE [V]
120
105℃
-5
-1
0
1
85℃
120
BU7242 family
140
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIGNAL VOLTAGE GAIN [dB]
140
80
0
(Vicm=VDD, VOUT=1.5[V])
BU7242 family
85℃
5
Fig.129
Input Offset Voltage – Ambient Temperature
VOUT=1.5[V])
160
-40℃
25℃
AMBIENT TEMPERATURE [℃]
Fig.128
Input Offset Voltage – Supply Voltage
(Vicm=VDD,
10
-15
-60
COMMON MODE REJECTION RATIO [dB]
1
COMMON MODE REJECTION RATIO [dB]
5.5V
3.0V
5.0
BU7242 family
15
7.5
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
7.5
BU7242 family
10.0
INPUT OFFSET VOLTAGE [mV]
10.0
Technical Note
Slew Rate L-H – Ambient Temperature
200
80
5.5V
1.0
150
60
40
Gain
0.5
1.8V
0.0
-60
-30
0
30
60
50
20
3.0V
90
120
AMBIENT TEMPERATURE [℃]
Fig.137
Slew Rate H-L – Ambient Temperature
100
PHASE [deg]
1.5
GAIN [dB]
SLEW RATE H-L [V/µs]
Phase
0
0
1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.138
Voltage Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7242F/FVM/NUX: -40[℃] ~ +85[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
22/36
BU7242S F/FVM/NUX: -40[℃] ~ +105[℃]
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Reference Data (BU7244 family)
POWER DISSIPATION [mW] .
POWER DISSIPATION [mW] .
BU7244 family
1000
800
BU7244F
600
400
200
800
BU7244 SF
600
400
200
BU7244 family
1000
105℃
800
SUPPLY CURRENT [µA]
BU7244 family
1000
85℃
600
400
200
-40℃
25℃
0
85 100
50
150
0
AMBIENT TEMPERATURE [℃]
BU7244 family
5.5V
3.0V
400
1.8V
0
-60
5.00
105℃
4.00
85℃
3.00
25℃
-40℃
2.00
1.00
2
3
4
5
SUPPLY VOLTAGE [V]
Fig.142
Output Voltage High – Supply Voltage
BU7244 family
5.5V
6
4
3.0V
1.8V
2
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
(RL=10[kΩ])
105℃
5
25℃
2
3
4
5
SUPPLY VOLTAGE [V]
5
0
-60
6
Fig.145
Output Voltage Low – Supply Voltage
0
30
60
10
3.0V
5
90
0
30
20
105℃
85℃
10
0
120
0.5
1
60
90
120
AMBIENT TEMPERATURE [℃]
2
2.5
3
Fig.146
Fig.147
Output Source Current – Output Voltage
(VDD=3[V])
BU7244 family
25℃
60
85℃
40
-40℃
20
0.0
1.5
OUTPUT VOLTAGE [V]
105℃
0
-30
30
AMBIENT TEMPERATURE [℃]
80
OUTPUT SINK CURRENT [mA]
OUTPUT SOURCE CURRENT [mA]
5.5V
15
0
-60
25℃
(RL=10[kΩ])
BU7244 family
1.8V
-40℃
40
0
-30
Output Voltage Low – Ambient Temperature
(RL=10[kΩ])
20
3.0V
1.8V
0
1
OUTPUT SOURCE CURRENT [mA]
85℃
-40℃
5.5V
10
BU7244 family
50
0.5
1.0
1.5
2.0
2.5
3.0
OUTPUT VOLTAGE [V]
BU7244 family
40
OUTPUT SINK CURRENT [mA]
10
15
120
Fig.144
Output Voltage High – Ambient Temperature
BU7244 family
20
OUTPUT VOLTAGE LOW [mV]
OUTPUT VOLTAGE LOW [mV]
15
6
BU7244 family
(RL=10[kΩ])
20
5
8
6
Fig.143
Supply Current – Supply Voltage
4
0
1
120
3
Fig.141
Supply Current – Supply Voltage
0.00
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
2
SUPPLY VOLTAGE [V]
BU7244 family
6.00
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [μA]
800
200
1
150
Fig.140
Derating curve
Derating curve
600
105
100
50
AMBIENT TEMPERATURE [℃]
Fig.139
1000
0
OUTPUT VOLTAGE HIGH [V]
0
0
30
5.5V
20
3.0V
10
1.8V
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE[℃]
Fig.148
Output Source Current – Ambient Temperature
Fig.149
Output Sink Current – Output Voltage
Fig.150
Output Sink Current – Ambient Temperature
(VOUT=VDD-0.4[V])
(VDD=3[V])
(VOUT=VSS+0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7244F: -40[℃] ~ +85[℃] BU7244SF: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
23/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
BU7244 family
5.0
25℃
2.5
105℃
0.0
-2.5
-40℃
-5.0
85℃
-7.5
5.0
5.5V
2.5
0.0
-2.5
1.8V
-5.0
-7.5
2
3
4
5
INPUT VOLTAGE [V]
-30
BU7244 family
25℃
-40℃
80
0
30
60
105℃
60
40
20
90
3
4
5
SUPPLY VOLTAGE [V]
140
1.8V
3.0V
5.5V
120
100
80
-60
6
POWER SUPPLY REJECTION RATIO [dB]
BU7244 family
100
5.5V
3.0V
60
1.8V
40
20
0
-60
-30
0
30
60
90
120
-30
0
30
60
90
120
4
BU7244 family
120
100
80
-40℃
60
85℃
40
25℃
105℃
20
0
1
3
4
5
SUPPLY VOLTAGE [V]
Fig.155
Large Signal Voltage Gain
– Ambient Temperature
Fig.156
Common Mode Rejection Ratio
– Supply Voltage
BU7244 family
2
6
BU7244 family
2.0
120
100
80
60
40
1.5
5.5V
1.0
3.0V
0.5
1.8V
20
0
-60
-30
0
30
60
90
0.0
120
-60
AMBIENT TEMPERATURE [℃]
Fig.157
BU7244 family
0
30
60
90
120
Fig.159
Slew Rate L-H – Ambient Temperature
Power Supply Rejection Ratio
– Ambient Temperature
100
-30
AMBIENT TEMPERATURE[℃]
Fig.158
Common Mode Rejection Ratio
– Ambient Temperature
BU7244 family
1
2
3
INPUT VOLTAGE [V]
AMBIENT TEMPERATURE [℃]
140
AMBIENT TEMPERATURE [℃]
2.0
0
(VDD=3[V])
BU7244 family
Fig.154
80
-10
(Vicm=VDD,VOUT=1.5[V])
Large Signal Voltage Gain
– Supply Voltage
120
105℃
-1
SLEW RATE L-H [V/µs]
2
85℃
-5
120
60
0
1
0
Fig.153
Input Offset Voltage – Input Voltage
160
LARGE SIGNAL VOLTAGE GAIN [dB]
LARGE SIGNAL VOLTAGE GAIN [dB]
85℃
120
100
25℃
Fig.152
Input Offset Voltage – Ambient Temperature
(Vicm=VDD,VOUT=1.5[V])
140
-40℃
5
AMBIENT TEMPERATURE [℃]
Fig.151
Input Offset Voltage – Supply Voltage
160
10
-15
-60
6
COMMON MODE REJECTION RATIO [dB]
1
COMMON MODE REJECTION RATIO [dB]
3.0V
-10.0
-10.0
BU7244 family
15
7.5
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
7.5
BU7244 family
10.0
INPUT OFFSET VOLTAGE [mV]
10.0
Technical Note
200
80
3.0V
1.0
5.5V
0.5
150
60
40
100
Gain
PHASE [deg]
1.5
GAIN [dB]
SLEW RATE H-L [V/μs]
Phase
50
20
1.8V
0.0
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.160
Slew Rate H-L – Ambient Temperature
0
1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.161
Voltage Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7244F: -40[℃] ~ +85[℃] BU7244SF: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
24/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Reference Data (BU7275 family)
POWER DISSIPATION [mW] .
BU7275HFV
600
400
200
85
50
BU7275SHFV
600
400
200
0
150
5.5V
1.8V
0
-60
105℃
25℃
-40℃
2.00
1.00
Fig.165
105℃
85℃
-40℃
5
3
4
5
SUPPLY VOLTAGE [V]
3
4
5
SUPPLY VOLTAGE [V]
10
5.5V
1.8V
3.0V
5
0
-60
6
0
3.0V
10
1.8V
5
0
-60
60
90
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
20
10
105℃
85℃
25℃
40
105℃
85℃
20
0.5
1.0
1.5
0.5
1
1.5
2
2.5
3
Fig.170
Output Source Current – Output Voltage
(VDD=3 [V])
-40℃
0.0
25℃
-40℃
30
OUTPUT VOLTAGE [V]
0
-30
BU7275 family
0
BU7275 family
60
120
40
120
(RL=10[kΩ])
80
OUTPUT SINK CURRENT [mA]
OUTPUT SOURCE CURRENT [mA]
5.5V
15
30
Fig.169
Output Voltage Low – Ambient Temperature
BU7275 family
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
0
-30
(RL=10[kΩ])
20
1.8V
2
50
AMBIENT TEMPERATURE [℃]
Fig.168
Output Voltage Low – Supply Voltage
3.0V
Fig.167
Output Voltage High – Ambient Temperature
2.0
2.5
3.0
OUTPUT VOLTAGE [V]
BU7275 family
50
OUTPUT SINK CURRENT [mA]
2
4
(RL=10[kΩ])
25℃
1
6
5.5V
-60
BU7275 family
15
0
5
BU7275 family
6
6
(RL=10[kΩ])
OUTPUT VOLTAGE LOW [mV]
10
2
Fig.166
Output Voltage High – Supply Voltage
BU7275 family
4
0
1
120
Supply Current – Supply Voltage
OUTPUT VOLTAGE LOW [mV]
85℃
3.00
3
8
0.00
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
15
2
Fig.164
Supply Current – Supply Voltage
5.00
4.00
-40℃
SUPPLY VOLTAGE [V]
BU7275 family
6.00
OUTPUT VOLTAGE HIGH [V]
SUPPLY CURRENT [μA]
75
25
1
150
Fig.163
Derating curve
BU7275 family
3.0V
25
0
105
100
50
Fig.162
Derating curve
50
50
AMBIENT TEMPERATURE [℃]
AMBIENT TEMPERATURE [℃]
100
105℃
85℃
25℃
0
100
75
OUTPUT VOLTAGE HIGH [V]
0
800
BU7275 family
100
OUTPUT SOURCE CURRENT [mA]
POWER DISSIPATION [mW] .
800
0
BU7275 family
1000
SUPPLY CURRENT [µA]
BU7275 family
1000
40
5.5V
30
20
3.0V
10
1.8V
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE[℃]
Fig.171
Output Source Current – Ambient Temperature
Fig.172
Output Sink Current – Output Voltage
Fig.173
Output Sink Current – Ambient Temperature
(VOUT=VDD-0.4[V])
(VDD=3[V])
(VOUT=VSS+0.4[V])
(*)The above data is ability value of sample, it is not guaranteed. BU7275 HFV: -40[℃] ~ +85[℃] BU7275S HFV: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
25/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
BU7275 family
6
4
-40℃
25℃
85℃
2
0
-2
-4
7.5
105℃
-6
5.0
2.5
0.0
1.8V
-7.5
2
3
4
5
INPUT VOLTAGE [V]
-60
6
120
25℃
80
105℃
-40℃
-30
0
30
60
90
60
40
20
3
4
5
SUPPLY VOLTAGE [V]
140
3.0V
1.8V
5.5V
120
100
80
-60
6
POWER SUPPLY REJECTION RATIO [dB]
100
3.0V
80
60
1.8V
40
20
0
-60
-30
0
30
60
90
-30
0
30
60
90
120
BU7275 family
100
105℃
85℃
80
60
-40℃
120
20
0
100
80
60
40
20
3
4
5
SUPPLY VOLTAGE [V]
6
BU7275 family
0.8
0.6
3.0V
5.5V
0.4
1.8V
0.2
0.0
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.180
Common Mode Rejection Ratio
– Ambient Temperature
Fig.181
Power Supply Rejection Ratio
– Ambient Temperature
BU7275 family
2
1.0
120
0
-60
25℃
40
1
BU7275 family
140
4
Fig.179
Common Mode Rejection Ratio
– Supply Voltage
AMBIENT TEMPERATURE[℃]
1.0
1
2
3
INPUT VOLTAGE [V]
120
Fig.178
Large Signal Voltage Gain
– Ambient Temperature
BU7275 family
5.5V
0
(VDD=3[V])
AMBIENT TEMPERATURE [℃]
Fig.177
Large Signal Voltage Gain
– Supply Voltage
120
-6
Fig.176
Input Offset Voltage – Input Voltage
SLEW RATE L-H [V/μs]
2
105℃
-1
60
0
1
85℃
-4
120
BU7275 family
160
LARGE SIGNAL VOLTAGE GAIN [dB]
85℃
100
0
-2
(Vicm=VDD,VOUT=1.5[V])
BU7275 family
-40℃
25℃
2
Fig.175
Input Offset Voltage – Ambient Temperature
(Vicm=VDD,VOUT=1.5[V])
140
4
AMBIENT TEMPERATURE [℃]
Fig.174
Input Offset Voltage – Supply Voltage
160
6
-10
COMMON MODE REJECTION RATIO [dB]
1
8
-8
-10.0
-10
COMMON MODE REJECTION RATIO [dB]
3.0V
-5.0
-8
LARGE SIGNAL VOLTAGE GAIN [dB]
5.5V
-2.5
BU7275 family
10
INPUT OFFSET VOLTAGE [mV]
8
BU7275 family
10.0
INPUT OFFSET VOLTAGE [mV]
INPUT OFFSET VOLTAGE [mV]
10
Technical Note
BU7275 family
100
-60
-30
0
30
60
90
AMBIENT TEMPERATURE [℃]
120
Fig.182
Slew Rate L-H – Ambient Temperature
200
Phase
80
3.0V
5.5V
0.4
1.8V
0.2
0.0
150
PHASE [deg]
0.6
GAIN [dB]
SLEW RATE H-L [V/μs]
0.8
60
100
40
Gain
50
20
0
-60
-30
0
30
60
90
120
AMBIENT TEMPERATURE [℃]
Fig.183
Slew Rate H-L – Ambient Temperature
0
1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08
FREQUENCY [Hz]
Fig.184
Voltage Gain – Frequency
(*)The above data is ability value of sample, it is not guaranteed. BU7275HFV: -40[℃] ~ +85[℃] BU7275SHFV: -40[℃] ~ +105[℃]
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
26/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Test circuit 1 NULL method
VDD, VSS, EK, Vicm Unit: [V]
Parameter
Input Offset Voltage
Large Signal Voltage Gain
Common-mode Rejection Ratio
(Input Common-mode Voltage Range)
Power Supply Rejection Ratio
VF
S1
S2
S3
VDD
VSS
EK
Vicm
Calculation
VF1
VF2
VF3
VF4
VF5
VF6
VF7
ON
ON
OFF
3
0
3
1
ON
ON
ON
3
0
-1.5
-0.5
-2.5
1.5
2
ON
ON
OFF
3
0
-1.5
0
3
3
ON
ON
OFF
1.8
5.5
0
-0.9
0
4
-Calculation-
1. Input Offset Voltage (Vio)
Vio =
2. Large Signal Voltage Gain (Av)
Av = 20Log
3. Common-mode Rejection Ratio (CMRR)
CMRR = 20Log
4. Power Supply Rejection Ratio (PSRR)
PSRR = 20Log
|VF1|
[V]
1+Rf/Rs
2×(1+Rf/Rs)
[dB]
|VF2-VF3|
1.8×(1+Rf/Rs)
|VF4-VF5|
[dB]
3.7×(1+Rf/Rs)
[dB]
|VF6-VF7|
0.1[µF]
Rf=50[kΩ]
SW1
RS=50[Ω]
500[kΩ]
VDD
0.01[µF]
15[V]
EK
Vo
Ri=1[MΩ]
500[kΩ]
0.015[µF]
RS=50[Ω]
Vicm
0.015[µF]
SW3
Ri=1[MΩ]
SW2
50[kΩ]
LL
DUT
1000[pF]
VF
RL
VSS
-15[V]
VRL
Fig.185 Test circuit 1 (one channel only)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
27/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Test circuit2 switch condition
SW
1
SW
2
SW
3
SW
4
SW
5
SW
6
Supply Current
OFF OFF
ON
OFF
ON
OFF OFF OFF OFF OFF OFF OFF
Maximum Output Voltage RL=10 [kΩ]
OFF
ON
OFF OFF
ON
OFF OFF
Output Current
OFF
ON
OFF OFF
ON
OFF OFF OFF OFF
Slew Rate
OFF OFF
Maximum Frequency
ON
SW No.
ON
OFF OFF OFF
OFF OFF
SW4
SW
7
R2
ON
ON
ON
SW
8
ON
SW
9
SW
10
OFF OFF
ON
SW
11
ON
SW
12
OFF
OFF OFF
OFF
ON
OFF OFF
ON
OFF OFF OFF
ON
OFF OFF
ON
100[kΩ]
●
●
VDD=3[V]
-
SW1
SW2
SW5
R1
SW6
+
SW7
SW8
SW9
RL
CL
SW10
SW11 SW12
1[kΩ]
GND
VIN-
VIN+
Vo
Fig.186 Test circuit 2
VIN
VOUT
[V]
[V]
3[V]
SR =ΔV / Δ t
3[V]
ΔV
3[V P-P]
Δt
0[V]
t
0[V]
Input waveform
t
Output waveform
Fig.187. Slew rate input output wave
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
28/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Test circuit 3 Channel separation
R2=100[kΩ]
R2=100[kΩ]
VDD
R1=1[kΩ]
V
VIN
R1//R2
VSS
VDD
R1=1[kΩ]
~
VOUT1
=1[Vrms]
R1//R2
V VOUT2
~
VSS
CS=20Log
100×VOUT1
VOUT2
Fig.188 Test circuit 3
●Schematic diagram
VDD
Vbias
IN+
class
AB c ontrol
IN-
OUT
Vbias
VSS
Fig.189 Simplified schematic
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
29/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Examples of circuit
○Voltage follower
Voltage gain is 0 [dB].
This circuit controls output voltage (Vout) equal input
voltage (Vin), and keeps Vout with stable because of high
input impedance and low output impedance.
Vout is shown next formula.
VDD
Vout
Vout=Vin
Vin
VSS
Fig. 190 Voltage follower circuit
○Inverting amplifier
R2
For inverting amplifier, Vin is amplified by voltage gain
decided R1 and R2, and phase reversed voltage is
outputted.
Vout is shown next formula.
VDD
R1
Vin
Vout
Vout=-(R2/R1)・Vin
Input impedance is R1.
R1//R2
VSS
Fig. 191 Inverting amplifier circuit
○Non-inverting amplifier
R1
R2
VDD
For non-inverting amplifier, Vin is amplified by voltage
gain decided R1 and R2, and phase is same with Vin.
Vout is shown next formula.
Vout
Vin
Vout=(1+R2/R1)・Vin
This circuit realizes high input impedance because Input
impedance is operational amplifier’s input Impedance.
VSS
Fig. 192 Non-inverting amplifier circuit
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
30/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Examples of circuit
○Adder circuit
R3
VDD
Vin1
Vin2
Adder circuit output the voltage that added up Input
voltage. A phase of the output voltage turns over,
because non-inverting circuit is used.
Vout is shown next formula.
R1
Vout
R2
Vout = -R3(Vin1/R1+Vin2/R2)
When three input voltage is as above, it connects
with input through resistance like R1 and R2.
VSS
Fig. 193 Adder circuit
○Differential amplifier
R2
VDD
R1
Vin1
Vin2
Vout
R3
Differential amplifier output the voltage
that amplified a difference of input voltage.
In the case of R1=R3=Ra, R2=R4=Rb
Vout is shown next formula.
Vout = -Rb/Ra(Vin1-Vin2)
R4
VSS
Fig. 194 Differential amplifier
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
31/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Description of electrical characteristics
Described here are the terms of electric characteristics used in this technical note. Items and symbols used are also shown.
Note that item name and symbol and their meaning may differ from those on another manufacture’s document or general document.
1. Absolute maximum ratings
Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of
absolute maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of
dharacteristics.
1.1 Power supply voltage (VDD/VSS)
Indicates the maximum voltage that can be applied between the positive power supply terminal and negative power
supply terminalwithout deterioration or destruction of characteristics of internal circuit.
1.2 Differential input voltage (Vid)
Indicates the maximum voltage that can be applied between non-inverting terminal and inverting terminal without
deterioration and destruction of characteristics of IC.
1.3 Input common-mode voltage range (Vicm)
Indicates the maximum voltage that can be applied to non-inverting terminal and inverting terminal without
deterioration or destruction of characteristics. Input common-mode voltage range of the maximum ratings not assure
normal operation of IC. When normalOperation of IC is desired, the input common-mode voltage of characteristics
item must be followed.
1.4 Power dissipation (Pd)
Indicates the power that can be consumed by specified mounted board at the ambient temperature 25℃(normal
temperature).
As for package product, Pd is determined by the temperature that can be permitted by IC chip in the package
(maximum junction temperature) and thermal resistance of the package.
2. Electrical characteristics item
2.1 Input offset voltage (Vio)
Indicates the voltage difference between non-inverting terminal and inverting terminal. It can be translated into the
input voltage difference required for setting the output voltage at 0 [V].
2.2 Input offset current (Iio)
Indicates the difference of input bias current between non-inverting terminal and inverting terminal.
2.3 Input bias current (Ib)
Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias current at
non-inverting terminal and input bias current at inverting terminal.
2.4 Circuit current (IDD)
Indicates the IC current that flows under specified conditions and no-load steady status.
2.5 High level output voltage / Low level output voltage (VOM)
Indicates the voltage range that can be output by the IC under specified load condition. It is typically divided into
high-level output voltage and low-level output voltage. High-level output voltage indicates the upper limit of output
voltage. Low-level output voltage indicates the lower limit.
2.6 Large signal voltage gain (AV)
Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal
and inverting terminal. It is normally the amplifying rate (gain) with reference to DC voltage.
Av = (Output voltage fluctuation) / (Input offset fluctuation)
2.7 Input common-mode voltage range (Vicm)
Indicates the input voltage range where IC operates normally.
2.8 Common-mode rejection ratio (CMRR)
Indicates the ratio of fluctuation of input offset voltage when in-phase input voltage is changed. It is normally the
fluctuation of DC.
CMRR =(Change of Input common-mode voltage)/(Input offset fluctuation)
2.9 Power supply rejection ratio (PSRR)
Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed. It is normally the fluctuation of DC.
PSRR=(Change of power supply voltage)/(Input offset fluctuation)
2.10 Channel separation (CS)
Indicates the fluctuation of input offset voltage or that of output voltage with reference to the change of output voltage
of driven channel.
2.11 Slew rate (SR)
Indicates the time fluctuation ratio of voltage output when step input signal is applied.
2.12 Unity gain frequency (ft)
Indicates a frequency where the voltage gain of Op-Amp is 1.
2.13 Total harmonic distortion + Noise (THD+N)
Indicates the fluctuation of input offset voltage or that of output voltage with reference to the change of output voltage
of driven channel.
2.14 Input referred noise voltage (Vn)
Indicates a noise voltage generated inside the operational amplifier equivalent by ideal voltage source connected in
series with input terminal.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
32/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Derating curve
Power dissipation (total loss) indicates the power that can be consumed by IC at Ta=25℃(normal temperature).IC is heated
when it consumed power, and the temperature of IC ship becomes higher than ambient temperature. The temperature that
can be accepted by IC chip depends on circuit configuration, manufacturing process, and consumable power is limited.
Power dissipation is determined by the temperature allowed in IC chip (maximum junction temperature) and thermal
resistance of package (heat dissipation capability). The maximum junction temperature is typically equal to the maximum
value in the storage temperature range. Heat generated by consumed power of IC radiates from the mold resin or lead frame
of the package. The parameter which indicates this heat dissipation capability (hardness of heat release) is called thermal
resistance, represented by the symbol θj-a[℃/W]. The temperature of IC inside the package can be estimated by this
thermal resistance. Fig.195 (a) shows the model of thermal resistance of the package. Thermal resistance θja, ambient
temperature Ta, junction temperature Tj, and power dissipation Pd can be calculated by the equation below :
θja = (Tj-Ta) / Pd
[℃/W]
・・・・・ (Ⅰ)
Derating curve in Fig.195(b) indicates power that can be consumed by IC with reference to ambient temperature. Power that
can be consumed by IC with reference to ambient temperature. Power that can be consumed by IC begins to attenuate at
certain ambient temperature. This gradient is determined by thermal resistance θja. Thermal resistance θja depends on chip
size, power consumption, package, ambient temperature, package condition, wind velocity, etc even when the same of
package is used. Thermal reduction curve indicates a reference value measured at a specified condition. Fig196(c) ~ (h)
show a derating curve for an example of low voltage full swing
[W]
CMOS Op-Amp.
Pd(max)
θja = ( Tj ー Ta ) / Pd [℃/W]
P2
θja2 <θja1
周囲温度 Ta [℃]
Ambient temperature Ta [℃]
θja2
P1
Tj(max)
θja1
0
50
25
Tj [℃]Tj [℃]
Chip surface
temperature
チップ 表面温度
75
100
125
]
Ta[℃
Ambient
temperature Ta [℃]
Power 消費電力
dissin] P [W]
(b) Derating curve
(a)Thermal resistance
Fig. 195 Thermal resistance and derating
1000
800
535[mW]
600
BU7295HFV(*30)
BU7275HFV(*30)
400
200
0
50
100
AMBIENT TEMPERATURE[℃ ]
POWER DISSIPATION [mW]
BU7295SHFV(*30)
BU7275SHFV(*30)
200
620[mW]
800
600
50
100
AMBIENT TEMPERATURE[℃ ]
4 88 [ mW ]
400
200
0
85 100
50
AM BIENT TEMPERATURE[℃ ]
0
0
(f) BU7261SG BU7241SG
0
150
(e) BU7264F BU7244F
1000
BU7262SF(*27)
BU7242SF(*27)
480[mW]
BU7262SFVM(*28)
BU7242SFVM(*28)
412[mW]
BU7262SNUX(*29)
BU7242SNUX(*29)
200
150
BU7264F(*31)
BU7244F(*31)
600
150
400
105
0
BU7262NUX(*29)
BU7242NUX(*29)
85
BU7261SG(*26)
BU7241SG(*26)
400
0
412[mW]
800
(d) BU7262F/FVM/NUX BU7242F/FVM/NUX
800
5 3 5 [m W ]
BU7262FVM(*28)
BU7242FVM(*28)
50
100
AMBIENT TEMPERATURE[℃]
1000
600
480[mW]
200
0
1000
5 4 0 [m W ]
BU7262F(*27)
BU7242F(*27)
400
150
(c) BU7261G BU7241G
BU7275HFV BU7295HFV
POW ER DISSIPATION [mW ]
600
0
85
0
800
1000
620[mW]
POW ER DISSIPATION [mW ]
POW ER DISSIPATION [mW ]
POWER DISSIPATION [mW]
BU7261G(*26)
BU7241G(*26)
540[mW]
POW ER DISSIPATION [mW ]
1000
105
50
100
AMBIENT TEMPERATURE[℃]
800
4 88 [ mW ]
600
400
200
0
150
(g) BU7262S F/FVM/NUX BU7242S F/FVM/NUX
BU7264SF(*31)
BU7244SF(*31)
105
0
50
100
AMBIENT TEMPERATURE[℃ ]
150
(h) BU7264SF BU7244SF
BU7275SHFV BU7295SHFV
(*26)
5.4
(*27)
6.2
(*28)
4.8
(*29)
4.12
(*30)
5.35
(*31)
4.88
Unit
[mW/℃]
When using the unit above Ta=25[℃], subtract the value above per degree[℃]. Permissible dissipation is the value.
when FR4 glass epoxy board 70[mm]×70[mm]×1.6[mm] (cooper foil area below 3[%]) is mounted.
Fig. 196 Derating Curve
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
33/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Notes for use
1) Absolute maximum ratings
Absolute maximum ratings are the values which indicate the limits, within which the given voltage range can be safely
charged to the terminal. However, it does not guarantee the circuit operation.
2) Applied voltage to the input terminal
For normal circuit operation of voltage comparator, please input voltage for its input terminal within input common mode
voltage VDD + 0.3[V].
Then, regardless of power supply voltage, VSS-0.3[V] can be applied to input terminals without deterioration or destruction
of its characteristics.
3) Operating power supply (split power supply/single power supply)
The voltage comparator operates if a given level of voltage is applied between VDD and VSS.
Therefore, the operational amplifier can be operated under single power supply or split power supply.
4) Power dissipation (pd)
If the IC is used under excessive power dissipation. An increase in the chip temperature will cause deterioration of the
radical characteristics of IC. For example, reduction of current capability. Take consideration of the effective power
dissipation and thermal design with a sufficient margin. Pd is reference to the provided power dissipation curve.
5) Short circuits between pins and incorrect mounting
Short circuits between pins and incorrect mounting when mounting the IC on a printed circuits board, take notice of the
direction and positioning of the IC.
If IC is mounted erroneously, It may be damaged. Also, when a foreign object is inserted between output, between output
and VDD terminal or VSS terminal which causes short circuit, the IC may be damaged.
6) Using under strong electromagnetic field
Be careful when using the IC under strong electromagnetic field because it may malfunction.
7) Usage of IC
When stress is applied to the IC through warp of the printed circuit board, The characteristics may fluctuate due to the
piezo effect. Be careful of the warp of the printed circuit board.
8) Testing IC on the set board
When testing IC on the set board, in cases where the capacitor is connected to the low impedance, make sure to
discharge per fabrication because there is a possibility that IC may be damaged by stress.
When removing IC from the set board, it is essential to cut supply voltage. As a countermeasure against the static
electricity, observe proper grounding during fabrication process and take due care when carrying and storage it.
9) The IC destruction caused by capacitive load
The transistors in circuits may be damaged when VDD terminal and VSS terminal is shorted with the charged output
terminal capacitor.When IC is used as a operational amplifier or as an application circuit, where oscillation is not activated
by an output capacitor, the output capacitor must be kept below 0.1[μF] in order to prevent the damage mentioned above.
10) Decupling capacitor
Insert the decupling capacitance between VDD and VSS, for stable operation of operational amplifier.
11) Latch up
Be careful of input voltage that exceed the VDD and VSS. When CMOS device have sometimes occur latch up operation.
And protect the IC from abnormaly noise
12) Decupling capacitor
Insert the decupling capacitance between VDD and VSS, for stable operation of operational amplifier.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
34/36
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
●Ordering part number
B
U
7
Part No.
2
6
Part No.
・7261 7261S
・7241 7241S
・7262 7262S
・7242 7242S
2
S
F
V
M
-
Package
G
: SSOP5
F
: SOP8, SOP14
FVM : MSOP8
NUX : VSON008X2030
HFV : HVSOF5
・7264 7264S
・7244 7244S
・7295 7295S
・7275 7275S
T
R
Packaging and forming specification
E2: Embossed tape and reel
(SOP8/SOP14)
TR: Embossed tape and reel
(SSOP5/MSOP8/VSON008X2030/HVSOF5)
SOP8
<Tape and Reel information>
7
5
6
+6°
4° −4°
6.2±0.3
4.4±0.2
0.3MIN
8
0.9±0.15
5.0±0.2
(MAX 5.35 include BURR)
1 2
3
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
4
0.595
1.5±0.1
+0.1
0.17 -0.05
S
S
0.11
0.1
1.27
Direction of feed
1pin
0.42±0.1
Reel
(Unit : mm)
∗ Order quantity needs to be multiple of the minimum quantity.
SOP14
<Tape and Reel information>
8.7 ± 0.2
(MAX 9.05 include BURR)
8
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
0.3MIN
4.4±0.2
6.2±0.3
14
1
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
7
1.5±0.1
0.15 ± 0.1
0.11
1.27
0.4 ± 0.1
0.1
Direction of feed
1pin
Reel
(Unit : mm)
∗ Order quantity needs to be multiple of the minimum quantity.
SSOP5
5
4
1
2
0.2Min.
+0.2
1.6 −0.1
2.8±0.2
<Tape and Reel information>
+6°
4° −4°
2.9±0.2
3
Tape
Embossed carrier tape
Quantity
3000pcs
Direction
of feed
TR
The direction is the 1pin of product is at the upper right when you hold
( reel on the left hand and you pull out the tape on the right hand
1pin
+0.05
0.13 −0.03
1.25Max.
)
0.05±0.05
1.1±0.05
S
+0.05
0.42 −0.04
0.95
0.1
S
Direction of feed
Reel
(Unit : mm)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
35/36
∗ Order quantity needs to be multiple of the minimum quantity.
2010.12 - Rev.A
BU7261/BU7261S family, BU7241/BU7241S family, BU7295/BU7295S family, BU7275/BU7275S family
BU7262/BU7262S family, BU7242/BU7242S family, BU7264/BU7264S family, BU7244/BU7244S family
Technical Note
MSOP8
<Tape and Reel information>
2.8±0.1
4.0±0.2
8 7 6 5
0.6±0.2
+6°
4° −4°
0.29±0.15
2.9±0.1
(MAX 3.25 include BURR)
Tape
Embossed carrier tape
Quantity
3000pcs
Direction
of feed
TR
The direction is the 1pin of product is at the upper right when you hold
( reel on the left hand and you pull out the tape on the right hand
)
1 2 3 4
1PIN MARK
1pin
+0.05
0.145 −0.03
0.475
0.08±0.05
0.75±0.05
0.9MAX
S
+0.05
0.22 −0.04
0.08 S
Direction of feed
0.65
Reel
(Unit : mm)
∗ Order quantity needs to be multiple of the minimum quantity.
HVSOF5
<Tape and Reel information>
(0.05)
4
4
(0.91)
5
0.2MAX
(0.3)
1.0±0.05
5
(0.41)
1.6±0.05
(0.8)
Tape
Embossed carrier tape
Quantity
3000pcs
Direction
of feed
TR
The direction is the 1pin of product is at the upper right when you hold
( reel on the left hand and you pull out the tape on the right hand
)
3 2 1
1 2 3
1pin
0.13±0.05
S
+0.03
0.02 −0.02
0.6MAX
1.2±0.05
(MAX 1.28 include BURR)
1.6±0.05
0.1
S
0.5
0.22±0.05
0.08
Direction of feed
M
Reel
(Unit : mm)
∗ Order quantity needs to be multiple of the minimum quantity.
VSON008X2030
<Tape and Reel information>
3.0±0.1
2.0±0.1
0.6MAX
1PIN MARK
0.25
TR
The direction is the 1pin of product is at the upper right when you hold
( reel on the left hand and you pull out the tape on the right hand
)
(0.12)
+0.03
0.02 −0.02
1.5±0.1
4000pcs
0.5
1
4
8
5
1.4±0.1
0.3±0.1
C0.25
Embossed carrier tape
Quantity
Direction
of feed
S
0.08 S
Tape
1pin
+0.05
0.25 −0.04
Reel
(Unit : mm)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
36/36
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
2010.12 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A
Similar pages