PHILIPS BUK6208-40C

BUK6208-40C
N-channel TrenchMOS intermediate level FET
Rev. 01 — 9 April 2010
Objective data sheet
1. Product profile
1.1 General description
Intermediate level gate drive N-channel enhancement mode Field-Effect Transistor (FET)
in a plastic package using advanced TrenchMOS technology. This product has been
designed and qualified to the appropriate AEC Q101 standard for use in high performance
automotive applications.
1.2 Features and benefits
„ AEC Q101 compliant
„ Suitable for intermediate level gate
drive sources
„ Suitable for thermally demanding
environments due to 175 °C rating
1.3 Applications
„ 12 V Automotive systems
„ Start-Stop micro-hybrid applications
„ Electric and electro-hydraulic power
steering
„ Transmission control
„ Motors, lamps and solenoid control
„ Ultra high performance power
switching
1.4 Quick reference data
Table 1.
Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max Unit
VDS
drain-source
voltage
Tj ≥ 25 °C; Tj ≤ 175 °C
-
-
40
V
ID
drain current
VGS = 10 V; Tmb = 25 °C
-
-
50
A
Ptot
total power
dissipation
Tmb = 25 °C; see Figure 1
-
-
128
W
VGS = 10 V; ID = 25 A;
Tj = 25 °C
-
6.6
8
mΩ
-
-
210
mJ
-
-
-
nC
[1]
Static characteristics
RDSon
drain-source
on-state
resistance
Avalanche ruggedness
EDS(AL)S
non-repetitive
ID = 50 A; Vsup ≤ 40 V;
drain-source
RGS = 50 Ω; VGS = 10 V;
avalanche energy Tj(init) = 25 °C; unclamped
Dynamic characteristics
QGD
gate-drain charge ID = 25 A; VDS = 32 V;
VGS = 10 V; see Figure 6
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
[1]
Continuous current is limited by package.
2. Pinning information
Table 2.
Pinning information
Pin
Symbol Description
1
G
gate
Simplified outline
2
D
Drain
3
S
source
mb
D
mounting base; connected to
drain
Graphic symbol
D
mb
G
mbb076
S
2
1
3
SOT428 (DPAK)
3. Ordering information
Table 3.
Ordering information
Type number
BUK6208-40C
BUK6208-40C
Objective data sheet
Package
Name
Description
Version
DPAK
plastic single-ended surface-mounted package (DPAK); 3 leads
(one lead cropped)
SOT428
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 9 April 2010
© NXP B.V. 2010. All rights reserved.
2 of 11
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
VDS
drain-source voltage
Tj ≥ 25 °C; Tj ≤ 175 °C
gate-source voltage
VGS
drain current
ID
Min
Typ
Max
Unit
-
-
40
V
Pulsed
[1]
-20
-
20
V
Tmb = 25 °C; VGS = 10 V
[2]
-
-
50
A
Tmb = 100 °C; VGS = 10 V
[2]
-
-
50
A
IDM
peak drain current
Tmb = 25 °C; tp ≤ 10 µs; pulsed
-
-
349
A
Ptot
total power dissipation
Tmb = 25 °C; see Figure 1
-
-
128
W
Tstg
storage temperature
-55
-
175
°C
Tj
junction temperature
-55
-
175
°C
VGS
gate-source voltage
-16
-
16
V
DC
Source-drain diode
[2]
IS
source current
Tmb = 25 °C
-
-
50
A
ISM
peak source current
tp ≤ 10 µs; pulsed; Tmb = 25 °C
-
-
349
A
ID = 50 A; Vsup ≤ 40 V; RGS = 50 Ω;
VGS = 10 V; Tj(init) = 25 °C; unclamped
-
-
210
mJ
-
-
-
J
Avalanche ruggedness
EDS(AL)S
non-repetitive
drain-source
avalanche energy
EDS(AL)R
repetitive drain-source
avalanche energy
[3][4][5]
[1]
Accumulated pulse duration not to exceed 5mins.
[2]
Continuous current is limited by package.
[3]
Single-pulse avalanche rating limited by maximum junction temperature of 175 °C.
[4]
Repetitive avalanche rating limited by an average junction temperature of 170 °C.
[5]
Refer to application note AN10273 for further information.
BUK6208-40C
Objective data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 9 April 2010
© NXP B.V. 2010. All rights reserved.
3 of 11
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
03na19
120
Pder
(%)
80
40
0
0
50
100
150
200
Tmb (°C)
Fig 1.
Normalized total power dissipation as a function of mounting base temperature
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Rth(j-mb)
thermal resistance
from junction to
mounting base
see Figure 2
-
-
1.17
K/W
003aae418
10
Zth(j-mb)
(K/W)
1
δ = 0.5
0.2
0.1
10-1
0.05
δ=
P
0.02
10-2
tp
T
single shot
t
tp
T
10-3
10-6
Fig 2.
10-5
10-4
10-3
10-2
10-1
tp (s)
1
Transient thermal impedance from junction to mounting base as a function of pulse duration
BUK6208-40C
Objective data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 9 April 2010
© NXP B.V. 2010. All rights reserved.
4 of 11
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
6. Characteristics
Table 6.
Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Static characteristics
V(BR)DSS
drain-source
breakdown voltage
ID = 250 µA; VGS = 0 V; Tj = 25 °C
40
-
-
V
ID = 250 µA; VGS = 0 V; Tj = -55 °C
36
-
-
V
VGS(th)
gate-source threshold
voltage
ID = 1 mA; VDS = VGS; Tj = 25 °C;
see Figure 3; see Figure 4
1.8
2.3
2.8
V
ID = 1 mA; VDS = VGS; Tj = -55 °C;
see Figure 3
-
-
3.3
V
ID = 1 mA; VDS = VGS; Tj = 175 °C;
see Figure 3
0.8
-
-
V
-
-
500
µA
IDSS
drain leakage current
VDS = 40 V; VGS = 0 V; Tj = 175 °C
VDS = 40 V; VGS = 0 V; Tj = 25 °C
-
0.02
1
µA
IGSS
gate leakage current
VDS = 0 V; VGS = 20 V; Tj = 25 °C
-
2
100
nA
VDS = 0 V; VGS = -20 V; Tj = 25 °C
-
2
100
nA
VGS = 10 V; ID = 25 A; Tj = 25 °C
-
6.6
8
mΩ
RDSon
drain-source on-state
resistance
VGS = 5 V; ID = 15 A; Tj = 25 °C
-
-
[tbd]
mΩ
VGS = 4.5 V; ID = 15 A; Tj = 25 °C
-
-
[tbd]
mΩ
VGS = 10 V; ID = 25 A; Tj = 175 °C;
see Figure 5
-
-
16.8
mΩ
ID = 25 A; VDS = 32 V; VGS = 10 V;
see Figure 6
-
-
-
nC
ID = 25 A; VDS = 32 V; VGS = 5 V;
see Figure 6
-
-
-
nC
ID = 25 A; VDS = 32 V; VGS = 10 V;
see Figure 6
-
-
-
nC
-
-
-
nC
-
3000
[tbd]
pF
-
450
[tbd]
pF
-
330
[tbd]
pF
-
-
-
ns
Dynamic characteristics
QG(tot)
total gate charge
QGS
gate-source charge
QGD
gate-drain charge
Ciss
input capacitance
Coss
output capacitance
Crss
reverse transfer
capacitance
td(on)
turn-on delay time
VGS = 0 V; VDS = 25 V; f = 1 MHz;
Tj = 25 °C
VDS = 30 V; RL = 1.2 Ω; VGS = 10 V;
RG(ext) = 10 Ω
tr
rise time
-
-
-
ns
td(off)
turn-off delay time
-
-
-
ns
tf
fall time
-
-
-
ns
LD
internal drain
inductance
from upper edge of drain mounting base
to centre of die ; Tj = 25 °C
-
3.5
-
nH
LS
internal source
inductance
from source lead to source bond pad ;
Tj = 25 °C
-
7.5
-
nH
Source-drain diode
VSD
source-drain voltage
IS = 25 A; VGS = 0 V; Tj = 25 °C
-
0.85
1.2
V
trr
reverse recovery time
-
-
-
ns
Qr
recovered charge
IS = 20 A; dIS/dt = -100 A/µs; VGS = 0 V;
VDS = 25 V
-
-
-
nC
BUK6208-40C
Objective data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 9 April 2010
© NXP B.V. 2010. All rights reserved.
5 of 11
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
003aad805
4
003aad806
10-1
ID
(A)
VGS(th)
(V)
10-2
3
max
min
2
typ
10-3
typ
max
min
10-4
1
0
-60
Fig 3.
10-5
10-6
0
60
120
Tj (°C)
0
180
Gate-source threshold voltage as a function of
junction temperature
Fig 4.
1
2
3
VGS (V)
4
Sub-threshold drain current as a function of
gate-source voltage
003aad793
2.5
VDS
a
ID
2
VGS(pl)
1.5
VGS(th)
VGS
1
QGS1
QGS2
QGS
0.5
QGD
QG(tot)
003aaa508
0
-60
Fig 5.
0
60
120
Tj (°C)
180
Normalized drain-source on-state resistance
factor as a function of junction temperature
BUK6208-40C
Objective data sheet
Fig 6.
Gate charge waveform definitions
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 9 April 2010
© NXP B.V. 2010. All rights reserved.
6 of 11
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
7. Package outline
Plastic single-ended surface-mounted package (DPAK); 3 leads (one lead cropped)
SOT428
y
E
A
A
A1
b2
E1
mounting
base
D2
D1
HD
2
L
L2
1
L1
3
b1
b
w
M
c
A
e
e1
0
5
10 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
b
b1
b2
c
D1
D2
min
E
E1
min
e
e1
HD
L
L1
min
L2
w
y
max
mm
2.38
2.22
0.93
0.46
0.89
0.71
1.1
0.9
5.46
5.00
0.56
0.20
6.22
5.98
4.0
6.73
6.47
4.45
2.285
4.57
10.4
9.6
2.95
2.55
0.5
0.9
0.5
0.2
0.2
OUTLINE
VERSION
SOT428
Fig 7.
REFERENCES
IEC
JEDEC
JEITA
TO-252
SC-63
EUROPEAN
PROJECTION
ISSUE DATE
06-02-14
06-03-16
Package outline SOT428 (DPAK)
BUK6208-40C
Objective data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 9 April 2010
© NXP B.V. 2010. All rights reserved.
7 of 11
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
8. Revision history
Table 7.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BUK6208-40C_1
20100409
Objective data sheet
-
-
BUK6208-40C
Objective data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 9 April 2010
© NXP B.V. 2010. All rights reserved.
8 of 11
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
9. Legal information
9.1
Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term 'short data sheet' is explained in section "Definitions".
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product
status information is available on the Internet at URL http://www.nxp.com.
9.2
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
9.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
BUK6208-40C
Objective data sheet
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. The product is not designed, authorized or warranted to be
suitable for use in medical, military, aircraft, space or life support equipment,
nor in applications where failure or malfunction of an NXP Semiconductors
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. NXP Semiconductors accepts no
liability for inclusion and/or use of NXP Semiconductors products in such
equipment or applications and therefore such inclusion and/or use is at the
customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on a weakness or default in the
customer application/use or the application/use of customer’s third party
customer(s) (hereinafter both referred to as “Application”). It is customer’s
sole responsibility to check whether the NXP Semiconductors product is
suitable and fit for the Application planned. Customer has to do all necessary
testing for the Application in order to avoid a default of the Application and the
product. NXP Semiconductors does not accept any liability in this respect.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Limiting values — Stress above one or more limiting values (as defined in the
Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 9 April 2010
© NXP B.V. 2010. All rights reserved.
9 of 11
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
Export control — This document as well as the item(s) described herein may
be subject to export control regulations. Export might require a prior
authorization from national authorities.
9.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Adelante, Bitport, Bitsound, CoolFlux, CoReUse, DESFire, EZ-HV,
FabKey, GreenChip, HiPerSmart, HITAG, I²C-bus logo, ICODE, I-CODE,
ITEC, Labelution, MIFARE, MIFARE Plus, MIFARE Ultralight, MoReUse,
Nexperia, QLPAK, Silicon Tuner, SiliconMAX, SmartXA, STARplug,
TOPFET, TrenchMOS, TriMedia and UCODE — are trademarks of NXP B.V.
HD Radio and HD Radio logo — are trademarks of iBiquity Digital
Corporation.
10. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
BUK6208-40C
Objective data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 9 April 2010
© NXP B.V. 2010. All rights reserved.
10 of 11
BUK6208-40C
NXP Semiconductors
N-channel TrenchMOS intermediate level FET
11. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
9.1
9.2
9.3
9.4
10
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1
General description . . . . . . . . . . . . . . . . . . . . . .1
Features and benefits . . . . . . . . . . . . . . . . . . . . .1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Quick reference data . . . . . . . . . . . . . . . . . . . . .1
Pinning information . . . . . . . . . . . . . . . . . . . . . . .2
Ordering information . . . . . . . . . . . . . . . . . . . . . .2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .3
Thermal characteristics . . . . . . . . . . . . . . . . . . .4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . .7
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . .8
Legal information. . . . . . . . . . . . . . . . . . . . . . . . .9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . .9
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Contact information. . . . . . . . . . . . . . . . . . . . . .10
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 9 April 2010
Document identifier: BUK6208-40C