PHILIPS BUK7514-30 Trenchmos transistor standard level fet Datasheet

Philips Semiconductors
Product specification
TrenchMOS transistor
Standard level FET
GENERAL DESCRIPTION
N-channel enhancement mode
standard level field-effect power
transistor in a plastic envelope using
’trench’ technology. The device
features very low on-state resistance
and has integral zener diodes giving
ESD protection up to 2kV. It is
intended for use in automotive and
general
purpose
switching
applications.
PINNING - TO220AB
PIN
BUK7514-30
QUICK REFERENCE DATA
SYMBOL
PARAMETER
VDS
ID
Ptot
Tj
RDS(ON)
Drain-source voltage
Drain current (DC)
Total power dissipation
Junction temperature
Drain-source on-state
resistance
VGS = 10 V
PIN CONFIGURATION
MAX.
UNIT
30
69
125
175
14
V
A
W
˚C
mΩ
SYMBOL
DESCRIPTION
d
tab
1
gate
2
drain
3
source
tab
g
drain
s
1 23
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134)
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
VDS
VDGR
±VGS
ID
ID
IDM
Ptot
Tstg, Tj
Drain-source voltage
Drain-gate voltage
Gate-source voltage
Drain current (DC)
Drain current (DC)
Drain current (pulse peak value)
Total power dissipation
Storage & operating temperature
RGS = 20 kΩ
Tmb = 25 ˚C
Tmb = 100 ˚C
Tmb = 25 ˚C
Tmb = 25 ˚C
-
- 55
30
30
16
69
48
240
125
175
V
V
V
A
A
A
W
˚C
TYP.
MAX.
UNIT
-
1.2
K/W
60
-
K/W
MIN.
MAX.
UNIT
-
2
kV
THERMAL RESISTANCES
SYMBOL
PARAMETER
CONDITIONS
Rth j-mb
Thermal resistance junction to
mounting base
Thermal resistance junction to
ambient
-
Rth j-a
in free air
ESD LIMITING VALUE
SYMBOL
PARAMETER
CONDITIONS
VC
Electrostatic discharge capacitor
voltage, all pins
Human body model
(100 pF, 1.5 kΩ)
December 1997
1
Rev 1.100
Philips Semiconductors
Product specification
TrenchMOS transistor
Standard level FET
BUK7514-30
STATIC CHARACTERISTICS
Tj= 25˚C unless otherwise specified
SYMBOL
PARAMETER
CONDITIONS
V(BR)DSS
Drain-source breakdown
voltage
Gate threshold voltage
VGS = 0 V; ID = 0.25 mA;
VGS(TO)
Tj = -55˚C
VDS = VGS; ID = 1 mA
Tj = 175˚C
Tj = -55˚C
IDSS
Zero gate voltage drain current
VDS = 30 V; VGS = 0 V;
IGSS
Gate source leakage current
VGS = ±10 V; VDS = 0 V
±V(BR)GSS
Gate-source breakdown
voltage
Drain-source on-state
resistance
IG = ±1 mA;
RDS(ON)
Tj = 175˚C
Tj = 175˚C
VGS = 10 V; ID = 25 A
Tj = 175˚C
MIN.
TYP.
MAX.
UNIT
30
27
2.0
1.0
16
3.0
0.05
0.02
-
4.0
4.4
10
500
1
20
-
V
V
V
V
V
µA
µA
µA
µA
V
-
12
-
14
26
mΩ
mΩ
MIN.
TYP.
MAX.
UNIT
DYNAMIC CHARACTERISTICS
Tmb = 25˚C unless otherwise specified
SYMBOL
PARAMETER
CONDITIONS
gfs
Forward transconductance
VDS = 25 V; ID = 25 A
9
18
-
S
Qg(tot)
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain (Miller) charge
ID = 69 A; VDD = 24 V; VGS = 10 V
-
38
7
14
-
nC
nC
nC
Ciss
Coss
Crss
Input capacitance
Output capacitance
Feedback capacitance
VGS = 0 V; VDS = 25 V; f = 1 MHz
-
1500
480
220
-
pF
pF
pF
td on
tr
td off
tf
Turn-on delay time
Turn-on rise time
Turn-off delay time
Turn-off fall time
VDD = 25 V; ID = 25 A;
VGS = 10 V; RG = 5 Ω
Resistive load
-
22
30
40
25
35
60
50
38
ns
ns
ns
ns
Ld
Internal drain inductance
-
3.5
-
nH
Ld
Internal drain inductance
-
4.5
-
nH
Ls
Internal source inductance
Measured from contact screw on
tab to centre of die
Measured from drain lead 6 mm
from package to centre of die
Measured from source lead 6 mm
from package to source bond pad
-
7.5
-
nH
December 1997
2
Rev 1.100
Philips Semiconductors
Product specification
TrenchMOS transistor
Standard level FET
BUK7514-30
REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS
Tj = 25˚C unless otherwise specified
SYMBOL
PARAMETER
IDR
IDRM
VSD
Continuous reverse drain
current
Pulsed reverse drain current
Diode forward voltage
trr
Qrr
Reverse recovery time
Reverse recovery charge
CONDITIONS
MIN.
TYP.
MAX.
UNIT
-
-
69
A
IF = 25 A; VGS = 0 V
IF = 69 A; VGS = 0 V
-
0.95
1.0
240
1.2
-
A
V
V
IF = 69 A; -dIF/dt = 100 A/µs;
VGS = -10 V; VR = 25 V
-
60
0.1
-
ns
µC
MIN.
TYP.
MAX.
UNIT
-
-
125
mJ
AVALANCHE LIMITING VALUE
SYMBOL
PARAMETER
CONDITIONS
WDSS
Drain-source non-repetitive
unclamped inductive turn-off
energy
ID = 36 A; VDD ≤ 15 V;
VGS = 10 V; RGS = 50 Ω; Tmb = 25 ˚C
December 1997
3
Rev 1.100
Philips Semiconductors
Product specification
TrenchMOS transistor
Standard level FET
120
BUK7514-30
Normalised Power Derating
PD%
Zth j-mb / (K/W)
10
BUKx55-lv
110
100
90
D=
1
0.5
80
0.1
0.2
0.1
0.05
0.02
0.01
0
70
60
50
40
30
tp
PD
D=
20
10
0
0
20
40
60
80 100
Tmb / C
120
140
160
Fig.1. Normalised power dissipation.
PD% = 100⋅PD/PD 25 ˚C = f(Tmb)
120
1E-05
1E-03
t/s
1E-01
1E+01
Fig.4. Transient thermal impedance.
Zth j-mb = f(t); parameter D = tp/T
Normalised Current Derating
ID%
t
T
0.001
1E-07
180
tp
T
100
110
100
ID / A
16
10
80
90
BUK7514-30
8
6.5
12
80
6
60
70
60
50
5.5
40
40
5
30
20
20
4.4
4
10
0
0
20
40
60
80 100
Tmb / C
120
140
160
0
180
2
ID / A
8
RDS(ON) / mOhm
40
10
5
7514-30
5.5
6
6.5
/ ID
V
)=
tp = 10 us
(ON
S
RD
100
6
Fig.5. Typical output characteristics, Tj = 25 ˚C.
ID = f(VDS); parameter VGS
7514-30
DS
4
VDS / V
Fig.2. Normalised continuous drain current.
ID% = 100⋅ID/ID 25 ˚C = f(Tmb); conditions: VGS ≥ 10 V
1000
0
30
100 us
VGS / V =
20
1 ms
10
1
10 ms
100 ms
1
10
VDS / V
10
0
100
12
0
20
40
60
80
16
100
ID / A
Fig.3. Safe operating area. Tmb = 25 ˚C
ID & IDM = f(VDS); IDM single pulse; parameter tp
December 1997
8
10
Fig.6. Typical on-state resistance, Tj = 25 ˚C.
RDS(ON) = f(ID); parameter VGS
4
Rev 1.100
Philips Semiconductors
Product specification
TrenchMOS transistor
Standard level FET
BUK7514-30
ID / A
7514-30
100
5
BUK759-60
max.
Tj / C = 25
80
VGS(TO) / V
4
175
typ.
60
3
40
2
20
1
min.
0
0
2
4
6
8
0
-100
10
-50
0
50
Tj / C
VGS / V
Fig.7. Typical transfer characteristics.
ID = f(VGS) ; conditions: VDS = 25 V; parameter Tj
200
Sub-Threshold Conduction
1E-01
30
1E-02
Tj / C = 25
20
150
Fig.10. Gate threshold voltage.
VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS
7514-30
gfs / S
100
175
2%
1E-03
typ
98%
1E-04
10
1E-05
0
0
20
40
ID / A
60
80
1E-06
Fig.8. Typical transconductance, Tj = 25 ˚C.
gfs = f(ID); conditions: VDS = 25 V
a
1
2
3
4
5
Fig.11. Sub-threshold drain current.
ID = f(VGS); conditions: Tj = 25 ˚C; VDS = VGS
C / pF
30V TrenchMOS
2
0
7514-30
10000
1.5
Ciss
1
1000
Coss
0.5
Crss
0
-100
-50
0
50
Tj / C
100
150
100
0.1
200
10
100
VDS / V
Fig.9. Normalised drain-source on-state resistance.
a = RDS(ON)/RDS(ON)25 ˚C = f(Tj); ID = 25 A; VGS = 10 V
December 1997
1
Fig.12. Typical capacitances, Ciss, Coss, Crss.
C = f(VDS); conditions: VGS = 0 V; f = 1 MHz
5
Rev 1.100
Philips Semiconductors
Product specification
TrenchMOS transistor
Standard level FET
10
BUK7514-30
VGS / V
7514-30
120
WDSS%
110
100
8
VDS / V = 6
90
24
80
6
70
60
50
4
40
30
2
20
10
0
0
0
10
20
QG / nC
30
20
40
Fig.13. Typical turn-on gate-charge characteristics.
VGS = f(QG); conditions: ID = 69 A; parameter VDS
100
IF / A
40
60
80
100
120
Tmb / C
140
160
180
Fig.15. Normalised avalanche energy rating.
WDSS% = f(Tmb); conditions: ID = 35 A
7514-30
VDD
+
L
80
VDS
60
Tj / C = 175
25
-
VGS
-ID/100
40
0
20
0
T.U.T.
R 01
shunt
RGS
0
0.5
1
VSDS / V
1.5
2
Fig.16. Avalanche energy test circuit.
WDSS = 0.5 ⋅ LID2 ⋅ BVDSS /(BVDSS − VDD )
Fig.14. Typical reverse diode current.
IF = f(VSDS); conditions: VGS = 0 V; parameter Tj
+
VDD
RD
VDS
-
VGS
0
RG
T.U.T.
Fig.17. Switching test circuit.
December 1997
6
Rev 1.100
Philips Semiconductors
Product specification
TrenchMOS transistor
Standard level FET
BUK7514-30
MECHANICAL DATA
Dimensions in mm
4,5
max
Net Mass: 2 g
10,3
max
1,3
3,7
2,8
5,9
min
15,8
max
3,0 max
not tinned
3,0
13,5
min
1,3
max 1 2 3
(2x)
0,9 max (3x)
2,54 2,54
0,6
2,4
Fig.18. SOT78 (TO220AB); pin 2 connected to mounting base.
Notes
1. Observe the general handling precautions for electrostatic-discharge sensitive devices (ESDs) to prevent
damage to MOS gate oxide.
2. Refer to mounting instructions for SOT78 (TO220) envelopes.
3. Epoxy meets UL94 V0 at 1/8".
December 1997
7
Rev 1.100
Philips Semiconductors
Product specification
TrenchMOS transistor
Standard level FET
BUK7514-30
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
 Philips Electronics N.V. 1997
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
December 1997
8
Rev 1.100
Similar pages