Vishay BY229B-400 Fast switching plastic rectifier Datasheet

BY229(X,B)-200 thru BY229(X,B)-800
Vishay General Semiconductor
Fast Switching Plastic Rectifier
TO-220AC
FEATURES
ITO-220AC
• Glass passivated chip junction
• Superfast recovery time for high efficiency
• Low leakage current
• High forward surge capability
• Meets MSL level 1, per J-STD-020, LF
maximum peak of 245 °C (for TO-263AB package)
2
2
1
1
BY229 Series
• Solder dip 260 °C, 40 s (for TO-220AC and
ITO-220AC package)
BY229x Series
PIN 1
PIN 1
CASE
PIN 2
PIN 2
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TO-263AB
K
TYPICAL APPLICATIONS
2
For use in fast switching rectification of power
supply, inverters, converters and freewheeling diodes
application.
1
BY229B Series
PIN 1
PIN 2
K
HEATSINK
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for commercial grade, meets JESD 201 class
1A whiskter test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV)
8.0 A
VRRM
200 V to 800 V
IFSM
100 A
trr
145 ns
VF
1.85 V
TJ max.
150 °C
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
BY229-200
BY229-400
BY229-600
BY229-800
UNIT
Maximum recurrent peak reverse voltage
VRRM
200
400
600
800
V
Maximum RMS voltage
VRMS
140
280
420
560
V
200
400
600
800
Maximum DC blocking voltage
VDC
Maximum average forward rectified current at TC = 100 °C
IF(AV)
8.0
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
100
A
Maximum slope of reverse recovery current
IF = 2.0 A, VR = 30 V, dI/dt = 20 µs
dI/dt
60
A/μs
TJ, TSTG
- 40 to + 150
°C
VAC
1500
V
Operating junction and storage temperature range
Isolation voltage (ITO-220AC only)
from terminal to heatsink t = 1 min
Document Number: 88540
Revision: 06-Nov-07
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
V
www.vishay.com
1
BY229(X,B)-200 thru BY229(X,B)-800
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous forward
voltage (1)
SYMBOL BY229-200 BY229-400 BY229-600 BY229-800 UNIT
20 A
VF
1.85
V
Maximum DC reverse current at
rated DC blocking voltage
TJ = 25 °C
TJ = 125 °C
IR
10
300
µA
Maximum reverse recovery time
IF = 1.0 A, VR = 30 V,
dI/dt = 50 A/µs, Irr = 10 % IRM
trr
145
ns
Maximum recovered stored charge
IF = 2.0 A, VR = 30 V,
dI/dt = 20 A/µs
Qrr
700
nC
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
BY229
BY229X
BY229B
UNIT
Typical thermal resistance from junction to case
RθJC
2.0
4.8
2.0
°C/W
Typical thermal resistance from junction to air
RθJA
20
-
20
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AC
BY229-200-E3/45
1.80
45
50/tube
Tube
ITO-220AC
BY229X-200-E3/45
1.95
45
50/tube
Tube
TO-263AB
BY229B-200-E3/45
1.77
45
50/tube
Tube
TO-263AB
BY229B-200-E3/81
1.77
81
800/reel
Tape reel
TO-220AC
BY229-200HE3/45 (1)
1.80
45
50/tube
Tube
ITO-220AC
BY229X-200HE3/45 (1)
1.95
45
50/tube
Tube
TO-263AB
BY229B-200HE3/45 (1)
1.77
45
50/tube
Tube
TO-263AB
BY229B-200HE3/81 (1)
1.77
81
800/reel
Tape reel
Note:
(1) Automotive grade AEC Q101 qualified
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88540
Revision: 06-Nov-07
BY229(X,B)-200 thru BY229(X,B)-800
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
1000
Resistive or Inductive Load
Instantaneous Reverse Leakage
Current (µA)
Average Forward Rectified Current (A)
12
10
8
6
4
2
0
TJ = 125 °C
TJ = 100 °C
10
1
TJ = 25 °C
0.1
0.01
0
25
50
100
75
125
0
150
20
40
60
80
100
Case Ambient Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Figure 1. Forward Current Derating Curve
Figure 4. Typical Reverse Leakage Characteristics
150
100
TL = 75 °C
8.3 ms Single Half Sine-Wave
125
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Junction Capacitance (pF)
Peak Forward Surge Current (A)
TJ = 150 °C
100
100
75
50
25
10
0
100
10
1
1
100
10
Number of Cycles at 60 Hz
Reverse Voltage (V)
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
Figure 5. Typical Junction Capacitance
Instantaneous Forward Current (A)
100
TJ = 150 °C
10
TJ = 25 °C
TJ = 100 °C
1
TJ = 125 °C
Pulse Width = 300 µs
1 % Duty Cycle
0.1
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Instantaneous Forward Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics
Document Number: 88540
Revision: 06-Nov-07
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
BY229(X,B)-200 thru BY229(X,B)-800
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
ITO-220AC
TO-220AC
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91) DIA.
0.148 (3.74) DIA.
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
1
PIN
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.035 (0.89)
0.025 (0.64)
0.025 (0.64)
0.015 (0.38)
0.022 (0.56)
0.014 (0.36)
0.205 (5.20)
0.195 (4.95)
7° REF.
0.191 (4.85)
0.171 (4.35)
CASE
0.037 (0.94)
0.027 (0.68)
7° REF.
2
1
0.560 (14.22)
0.530 (13.46)
PIN 1
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.350 (8.89)
0.330 (8.38)
0.110 (2.79)
0.100 (2.54)
PIN 2
0.105 (2.67)
0.095 (2.41)
0.671 (17.04)
0.651 (16.54)
PIN
1.148 (29.16)
1.118 (28.40)
2
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.603 (15.32)
0.573 (14.55)
0.350 (8.89)
0.330 (8.38)
7° REF.
0.076 (1.93) REF.
45° REF.
0.635 (16.13)
0.625 (15.87)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.055 (1.40)
0.045 (1.14)
Mounting Pad Layout
0.42 (10.66) MIN.
K
0.360 (9.14)
0.320 (8.13)
1
K
2
0.624 (15.85)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
www.vishay.com
4
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.33 (8.38) MIN.
0.670 (17.02)
0.591 (15.00)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88540
Revision: 06-Nov-07
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages