PHILIPS BY229X-200 Rectifier diodes fast, soft-recovery Datasheet

Philips Semiconductors
Product specification
Rectifier diodes
fast, soft-recovery
FEATURES
BY229F, BY229X series
SYMBOL
• Low forward volt drop
• Fast switching
• Soft recovery characteristic
• High thermal cycling performance
• Isolated mounting tab
QUICK REFERENCE DATA
VR = 200 V/ 400 V/ 600 V/800 V
k
1
IF(AV) = 8 A
a
2
IFSM ≤ 60 A
trr ≤ 135 ns
GENERAL DESCRIPTION
Glass-passivated double diffused rectifier diodes featuring low forward voltage drop, fast reverse recovery and soft
recovery characteristic. The devices are intended for use in TV receivers, monitors and switched mode power supplies.
The BY229F series is supplied in the conventional leaded SOD100 package.
The BY229X series is supplied in the conventional leaded SOD113 package.
PINNING
PIN
SOD100
SOD113
DESCRIPTION
case
1
cathode
2
anode
tab
case
isolated
1
2
1
2
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL
PARAMETER
VRSM
VRRM
VRWM
VR
Peak non-repetitive reverse
voltage
Peak repetitive reverse voltage
Crest working reverse voltage
Continuous reverse voltage
IF(AV)
Average forward current1
CONDITIONS
MIN.
BY229F- / BY229X-
IF(RMS)
IFRM
RMS forward current
Peak repetitive forward current
IFSM
Peak non-repetitive forward
current
I2t
Tstg
Tj
I2t for fusing
Storage temperature
Operating junction temperature
square wave; δ = 0.5;
Ths ≤ 83 ˚C
sinusoidal; a = 1.57;
Ths ≤ 90 ˚C
t = 25 µs; δ = 0.5;
Ths ≤ 83 ˚C
t = 10 ms
t = 8.3 ms
sinusoidal; Tj = 150 ˚C
prior to surge; with
reapplied VRWM(max)
t = 10 ms
MAX.
UNIT
-
200
200
400
400
600
600
800
800
V
-
200
150
150
400
300
300
600
500
500
800
600
600
V
V
V
-
8
A
-
7
A
-
11
16
A
A
-
60
66
A
A
-40
-
18
150
150
A2s
˚C
˚C
1. Neglecting switching and reverse current losses.
September 1998
1
Rev 1.200
Philips Semiconductors
Product specification
Rectifier diodes
fast, soft-recovery
BY229F, BY229X series
ISOLATION LIMITING VALUE & CHARACTERISTIC
Ths = 25 ˚C unless otherwise specified
SYMBOL PARAMETER
CONDITIONS
Visol
Peak isolation voltage from
both terminals to external
heatsink
SOD100 package; R.H. ≤ 65%; clean and
dustfree
MIN.
Visol
Cisol
TYP. MAX. UNIT
-
-
1500
V
R.M.S. isolation voltage from SOD113 package; f = 50-60 Hz;
both terminals to external
sinusoidal waveform; R.H. ≤ 65%; clean
heatsink
and dustfree
-
-
2500
V
Capacitance from pin 1 to
external heatsink
-
10
-
pF
MIN.
TYP.
MAX.
UNIT
-
55
4.8
7.2
-
K/W
K/W
K/W
MIN.
TYP.
MAX.
UNIT
-
1.5
0.1
1.85
0.4
V
mA
MIN.
TYP.
MAX.
UNIT
-
100
0.5
50
135
0.7
60
ns
µC
A/µs
f = 1 MHz
THERMAL RESISTANCES
SYMBOL
PARAMETER
CONDITIONS
Rth j-hs
Thermal resistance junction to
heatsink
Thermal resistance junction to
ambient
with heatsink compound
without heatsink compound
in free air.
Rth j-a
STATIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL
PARAMETER
CONDITIONS
VF
IR
Forward voltage
Reverse current
IF = 20 A
VR = VRWM; Tj = 125 ˚C
DYNAMIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL
PARAMETER
CONDITIONS
trr
Qs
dIR/dt
Reverse recovery time
Reverse recovery charge
Maximum slope of the reverse
recovery current
IF = 1 A; VR > 30 V; -dIF/dt = 50 A/µs
IF = 2 A; VR > 30 V; -dIF/dt = 20 A/µs
IF = 2 A; -dIF/dt = 20 A/µs
September 1998
2
Rev 1.200
Philips Semiconductors
Product specification
Rectifier diodes
fast, soft-recovery
I
dI
F
BY229F, BY229X series
80
F
dt
BY229
IFS(RMS) / A
70
IFSM
60
trr
50
time
40
30
Qs
I
100%
25%
20
10
I
R
0
rrm
1ms
Fig.1. Definition of trr, Qs and Irrm
20
30
54
15
10s
BY229F
Tj = 150 C
Tj = 25 C
78
0.5
20
0.2
10
1s
IF / A
D = 1.0
Vo = 1.25 V
Rs = 0.03 Ohms
0.1s
tp / s
Fig.4. Maximum non-repetitive rms forward current.
IF = f(tp); sinusoidal current waveform; Tj = 150˚C prior
to surge with reapplied VRWM.
Ths(max) / C
BY329
PF / W
10ms
102
0.1
tp
I
D=
5
tp
T
2
4
6
IF(AV) / A
8
typ
10
150
12
0
0
Fig.2. Maximum forward dissipation, PF = f(IF(AV));
square wave current waveform; parameter D = duty
cycle = tp/T.
15
Ths(max) / C
BY329
PF / W
Vo = 1.25 V
0.5
1
VF / V
10
78
2.2
2
BY329
Qs / uC
Tj = 150 C
Tj = 25 C
IF = 10 A
1.9
10
1.5
Fig.5. Typical and maximum forward characteristic;
IF = f(VF); parameter Tj
a = 1.57
Rs = 0.03 Ohms
max
t
T
0
0
10
126
10 A
102
2A
2.8
4
1A
2A
1
1A
126
5
0
0
2
4
IF(AV) / A
6
0.1
150
8
1
Fig.3. Maximum forward dissipation, PF = f(IF(AV));
sinusoidal current waveform; parameter a = form
factor = IF(RMS)/IF(AV).
September 1998
10
-dIF/dt (A/us)
100
Fig.6. Maximum Qs at Tj = 25˚C and 150˚C
3
Rev 1.200
Philips Semiconductors
Product specification
Rectifier diodes
fast, soft-recovery
BY229F, BY229X series
BY329
trr / ns
1000
10
Transient thermal impedance, Zth j-hs (K/W)
IF = 10 A
1
10A
1A
1A
0.1
100
PD
0.01
tp
D=
Tj = 150 C
Tj = 25 C
0.001
1us
10
1
10
-dIF/dt (A/us)
100
Fig.7. Maximum trr measured to 25% of Irrm; Tj = 25˚C
and 150˚C
100
T
10us
tp
T
t
100us 1ms
10ms 100ms
1s
pulse width, tp (s)
BY229F
10s
Fig.9. Transient thermal impedance Zth = f(tp)
BY329
Cd / pF
10
1
1
10
VR / V 100
1000
Fig.8. Typical junction capacitance Cd at f = 1 MHz;
Tj = 25˚C
September 1998
4
Rev 1.200
Philips Semiconductors
Product specification
Rectifier diodes
fast, soft-recovery
BY229F, BY229X series
MECHANICAL DATA
Dimensions in mm
10.2
max
5.7
max
3.2
3.0
Net Mass: 2 g
4.4
max
0.9
0.5
2.9 max
4.4
4.0
7.9
7.5
17
max
seating
plane
3.5 max
not tinned
4.4
13.5
min
k
0.4
a
0.9
0.7
M
0.55 max
1.3
5.08
top view
Fig.10. SOD100; The seating plane is electrically isolated from all terminals.
Notes
1. Refer to mounting instructions for F-pack envelopes.
2. Epoxy meets UL94 V0 at 1/8".
September 1998
5
Rev 1.200
Philips Semiconductors
Product specification
Rectifier diodes
fast, soft-recovery
BY229F, BY229X series
MECHANICAL DATA
Dimensions in mm
10.3
max
4.6
max
Net Mass: 2 g
3.2
3.0
2.9 max
2.8
Recesses (2x)
2.5
0.8 max. depth
6.4
15.8
19
max. max.
15.8
max
seating
plane
3 max.
not tinned
3
2.5
13.5
min.
1
0.4
2
M
1.0 (2x)
0.6
2.54
0.9
0.7
0.5
2.5
5.08
Fig.11. SOD113; The seating plane is electrically isolated from all terminals.
Notes
1. Refer to mounting instructions for F-pack envelopes.
2. Epoxy meets UL94 V0 at 1/8".
September 1998
6
Rev 1.200
Philips Semiconductors
Product specification
Rectifier diodes
fast, soft-recovery
BY229F, BY229X series
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
 Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
September 1998
7
Rev 1.200
Similar pages