Vishay BY253P General purpose plastic rectifier Datasheet

BY251P thru BY255P
Vishay General Semiconductor
General Purpose Plastic Rectifier
FEATURES
• Low forward voltage drop
• Low leakage current, IR less than 0.1 μA
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
DO-201AD
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes application.
Note
• These devices are not AEC-Q101 qualified.
PRIMARY CHARACTERISTICS
IF(AV)
3.0 A
VRRM
200 V to 1300 V
IFSM
150 A
IR
5.0 μA
VF
1.1 V
TJ max.
150 °C
MECHANICAL DATA
Case: DO-201AD, molded epoxy body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
per
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
BY251P
BY252P
BY253P
BY254P
BY255P
UNIT
Maximum repetitive peak reverse voltage
VRRM
200
400
600
800
1300
V
Maximum RMS voltage
VRMS
140
280
420
560
910
V
Maximum DC blocking voltage
VDC
200
400
600
800
1300
V
Maximum average forward rectified current
10 mm lead length
IF(AV)
3.0
A
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
IFSM
150
A
Maximum full load reverse current, full cycle average
10 mm lead length
IR(AV)
100
μA
TJ, TSTG
- 55 to + 150
°C
Operating junction and storage temperature range
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous
forward voltage
3.0 A
SYMBOL
BY251P
BY252P
BY253P
BY254P
BY255P
UNIT
VF
1.1
V
TA = 25 °C
IR
5.0
μA
Maximum reverse
recovery time
IF = 0.5 A, IR = 1.0 V,
Irr = 0.25 A
trr
3.0
μs
Typical junction capacitance
4.0 V, 1 MHz
CJ
40
pF
Maximum reverse current
at rated DC blocking voltage
Document Number: 88838
Revision: 04-Nov-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
BY251P thru BY255P
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
BY251P
BY252P
BY253P
RθJA (1)
20
(1)
10
RθJL
BY254P
BY255P
UNIT
°C/W
Note
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, P.C.B. mounted
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
BY253P-E3/54
1.1
54
1400
13" diameter paper tape and reel
BY253P-E3/73
1.1
73
1000
Ammo pack packaging
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
10
60 Hz Resistive
or Inductive Load
Instantaneous Reverse Leakage
Current (μA)
Average Forward Rectified Current (A)
4.0
3.0
2.0
1.0
10 mm Lead Length
0
1
TJ = 75 °C
0.1
TJ = 25 °C
0.01
0
25
50
75
100
125
150
175
40
20
0
80
60
100
Ambient Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 3 - Maximum Non-repetitive Peak Forward Surge Current
100
1000
Instantaneous Forward Current (A)
8.3 ms Single Half Sine-Wave
Peak Forward Surge Current (A)
TJ = 125 °C
100
TA = 55 °C
0
1
10
100
TJ = 25 °C
Pulse Width = 300 μs
1 % Duty Cycle
10
1
0.1
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
Number of Cycles at 60 Hz
Instantaneous Forward Voltage (V)
Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current
Fig. 4 - Typical Instantaneous Forward Characteristics
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88838
Revision: 04-Nov-09
BY251P thru BY255P
Vishay General Semiconductor
100
Junction Capacitance (pF)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
10
1
100
Reverse Voltage (V)
Fig. 5 - Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-201AD
1.0 (25.4)
MIN.
0.210 (5.3)
0.190 (4.8)
DIA.
0.375 (9.5)
0.285 (7.2)
1.0 (25.4)
MIN.
0.052 (1.32)
0.048 (1.22)
DIA.
Document Number: 88838
Revision: 04-Nov-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages