PHILIPS BY428 Damper diode Datasheet

DISCRETE SEMICONDUCTORS
DATA SHEET
handbook, 2 columns
M3D118
BY428
Damper diode
Product specification
Supersedes data of May 1996
1996 Sep 26
Philips Semiconductors
Product specification
Damper diode
BY428
FEATURES
DESCRIPTION
• Glass passivated
Rugged glass package, using a high
temperature alloyed construction.
• High maximum operating
temperature
• Low leakage current
• Excellent stability
• Available in ammo-pack
• Also available with preformed leads
for easy insertion.
,
2/3 page k(Datasheet)
APPLICATIONS
• Damper diode in high frequency
horizontal deflection circuits up to
64 kHz.
This package is hermetically sealed
and fatigue free as coefficients of
expansion of all used parts are
matched.
a
MAM104
Fig.1 Simplified outline (SOD64) and symbol.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
VRSM
non-repetitive peak reverse voltage
−
1500
V
VRRM
repetitive peak reverse voltage
−
1500
V
VR
continuous reverse voltage
−
1400
V
IFWM
working peak forward current
−
4
A
IFRM
repetitive peak forward current
−
8
A
IFSM
non-repetitive peak forward current
−
50
A
Tstg
storage temperature
−65
+175
°C
Tj
junction temperature
−65
+150
°C
Ttp = 80 °C; lead length = 10 mm;
see Fig.2
t = 10 ms half sinewave;
Tj = Tj max prior to surge;
VR = VRRMmax
ELECTRICAL CHARACTERISTICS
Tj = 25 °C; unless otherwise specified.
SYMBOL
VF
PARAMETER
forward voltage
CONDITIONS
MAX.
UNIT
IF = 4 A; Tj = Tj max; see Fig.3
1.60
V
IF = 4 A; see Fig.3
1.95
V
IR
reverse current
VR = VRmax; Tj = 150 °C
150
µA
trr
reverse recovery time
when switched from IF = 0.5 A to IR = 1 A;
measured at IR = 0.25 A; see Fig.6
250
ns
tfr
forward recovery time
when switched to IF = 5 A in 50 ns;
Tj = Tj max; see Fig.7
250
ns
1996 Sep 26
2
Philips Semiconductors
Product specification
Damper diode
BY428
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
CONDITIONS
VALUE
UNIT
Rth j-tp
thermal resistance from junction to tie-point
lead length = 10 mm
25
K/W
Rth j-a
thermal resistance from junction to ambient
note 1
75
K/W
mounted as shown in Fig.5
40
K/W
Note
1. Device mounted on an epoxy-glass printed-circuit board, 1.5 mm thick; thickness of Cu-layer ≥40 µm, see Fig.4.
For more information please refer to the “General Part of associated Handbook”.
1996 Sep 26
3
Philips Semiconductors
Product specification
Damper diode
BY428
GRAPHICAL DATA
MBH409
4
MBH410
8
handbook, halfpage
handbook, halfpage
Ptot
IF
(A)
(W)
3
6
2
4
1
2
0
0
0
1
2
3
4
5
IFWM (A)
6
0
1
Solid line: basic high-voltage E/W modulator circuit; see Fig.8.
Dotted line: basic conventional horizontal deflection circuit; see Fig.9.
Curves include power dissipation due to switching losses.
Dotted line: Tj = 150 °C.
Solid line: Tj = 25 °C.
Fig.2
Fig.3
Maximum total power dissipation as a
function of working peak forward current.
3
VF (V)
Forward current as a function of forward
voltage; maximum values.
35
handbook, halfpage
10
50
handbook, halfpage
2
25
3 cm2
copper
7
3 cm2
copper
50
30
10
2
3
MGA204
MGA200
25.4
Dimensions in mm.
Dimensions in mm.
Fig.5
Fig.4 Device mounted on a printed-circuit board.
1996 Sep 26
4
Mounting with additional printed-circuit
board for heat sink purposes.
Philips Semiconductors
Product specification
Damper diode
BY428
handbook, full pagewidth
IF
(A)
DUT
+
10 Ω
0.5
25 V
t rr
1Ω
50 Ω
0
t
0.25
0.5
IR
(A)
1.0
Input impedance oscilloscope: 1 MΩ, 22 pF; tr ≤ 7 ns.
Source impedance: 50 Ω; tr ≤ 15 ns.
Fig.6 Test circuit and reverse recovery time waveform and definition.
MGD600
handbook, halfpage
VF
90%
t fr
100%
t
IF
10%
t
Fig.7 Forward recovery time definition.
1996 Sep 26
5
MAM057
Philips Semiconductors
Product specification
Damper diode
BY428
APPLICATION INFORMATION
For horizontal deflection circuits, two basic applications are shown in Figs 8 and 9.
The maximum allowable total power dissipation for the diode can be calculated from the thermal resistance Rth j-a and
the difference between Tj max and Tamb max in the application. The maximum IFWM can then be taken from Fig.2.
The basic application waveforms in Fig.10 relate to the circuit in Fig.8. In the circuit in Fig.9 the forward conduction time
of the diode is shorter, allowing a higher IFWM (see Fig.2).
handbook, horizontal
halfpage
deflection
transistor
D1
horizontal
handbook, halfpage
LY
deflection
transistor
D1
Cf
LY
Cs
+ (E-W)
MBE934
MBE935
D1 = BY428.
D1 = BY428.
Fig.8
Fig.9
Application in basic high-voltage E/W
modulator circuit.
Application in basic horizontal deflection
circuit.
handbook, full pagewidth
I FRM
IF
I FWM
time
VRRM
VR
time
tp
T
MCD430 - 1
Fig.10 Basic application waveforms.
1996 Sep 26
6
Philips Semiconductors
Product specification
Damper diode
BY428
,
PACKAGE OUTLINE
k
handbook, full pagewidth
4.5
max
28 min
5.0 max
Dimensions in mm.
The marking band indicates the cathode.
28 min
a
1.35
max
MBC049
Fig.11 SOD64.
DEFINITIONS
Data Sheet Status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification
This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1996 Sep 26
7
Similar pages