Seme LAB BYM13-40 Surface mount schottky barrier rectifier Datasheet

BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60
Vishay General Semiconductor
Surface Mount Schottky Barrier Rectifier
FEATURES
• MELF Schottky rectifier
• Ideal for automated placement
• Guardring for overvoltage protection
• Low power losses, high efficiency
• Low forward voltage drop
• High surge capability
• Meets MSL level 1, per J-STD-020C, LF max peak
of 250 °C
DO-213AB
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
MAJOR RATINGS AND CHARACTERISTICS
IF(AV)
1.0 A
VRRM
20 V to 60 V
IFSM
30 A
VF
0.50 V, 0.70 V
Tj max.
125 °C, 150 °C
TYPICAL APPLICATIONS
For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection
applications
MECHANICAL DATA
Case: DO-213AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: Two bands indicate cathode end 1st band
denotes device type 2nd band denotes voltage type
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60
Denotes Schottky devices: 1st band is orange
Polarity color bands (2nd band) voltage type
SGL41-20
SGL41-30
SGL41-40
SGL41-50
SGL41-60
Gray
Red
Orange
Yellow
Green
UNIT
Maximum repetitive peak reverse voltage
VRRM
20
30
40
50
60
V
Maximum RMS voltage
VRMS
14
21
28
35
42
V
Maximum DC blocking voltage
VDC
20
30
40
50
60
V
Maximum average forward rectified current (see Fig.
IF(AV)
1.0
A
Peak forward surge current 8.3 ms single half sinewave superimposed on rated load
IFSM
30
A
Voltage rate of change (rated VR)
dv/dt
10000
V/µs
Operating junction temperature range
Storage temperature range
Document Number 88548
03-Nov-06
TJ
TSTG
- 55 to + 125
- 55 to + 150
- 55 to + 150
°C
°C
www.vishay.com
1
BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
Maximum instantaneous
at 1.0 A
forward voltage (1)
BYM13-20
BYM13-30
BYM13-40
BYM13-50
BYM13-60
SGL41-20
SGL41-30
SGL41-40
SGL41-50
SGL41-60
VF
0.50
UNIT
0.70
V
0.5
Maximum reverse
current at rated DC
blocking voltage (1)
TA = 25 °C
TA = 100 °C
Typical junction
capacitance
IR
at 4.0 V, 1.0 MHz
CJ
10
5.0
110
80
mA
pF
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
BYM13-20
BYM13-30
BYM13-40
BYM13-50
BYM13-60
SGL41-20
SGL41-30
SGL41-40
SGL41-50
SGL41-60
RθJA
RθJT
Maximum thermal resistance (1)
UNIT
75
30
°C/W
Note:
(1) Thermal resistance junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal
ORDERING INFORMATION
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.114
96
1500
7" Diameter Plastic Tape & Reel
SGL41-40-E3/96
GL41-40-E3/97
0.114
97
5000
13" Diameter Plastic Tape & Reel
BYM13-40-E3/96
0.114
96
1500
7" Diameter Plastic Tape & Reel
BYM13-40-E3/97
0.114
97
5000
13" Diameter Plastic Tape & Reel
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
30
Average Forward Current (A)
Resistive or
Inductive Load
P.C.B. Mounted
on 0.24 x 0.24"
(6.0 x 6.0 mm)
Copper Land
Areas
0.75
SGL41-20 - SGL41-40
0.50
SGL41-50 & SGL41-60
0.25
Peak Forward Surge Current (A)
1.0
At Rated Td
8.3 ms Single Half Sine-Wave
25
20
15
10
5
0
25
0
50
75
100
125
150
Terminal Temperature (°C)
Figure 1. Forward Current Derating Curve
www.vishay.com
2
175
1
10
100
Number of Cycles at 60 Hz
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
Document Number 88548
03-Nov-06
BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60
Vishay General Semiconductor
400
Tj = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Tj = 125 °C
10
Junction Capacitance (pF)
Instantaneous Forward Current (A)
50
Tj = 150 °C
Pulse Width = 300 µs
1 % Duty Cycle
1
Tj = 25 °C
0.1
100
SGL41-20 - SGL41-40
SGL41-50 & SGL41-60
SGL41-20 - SGL41-40
SGL41-50 & SGL41-60
0.01
10
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1
0.1
10
40
100
Reverse Voltage (V)
Instantaneous Forward Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 5. Typical Junction Capacitance
Instantaneous Reverse Current (mA)
100
SGL41-20 - SGL41-40
SGL41-50 & SGL41-60
10
Tj = 125 °C
1
0.1
Tj = 75 °C
0.01
Tj = 25 °C
0.001
0
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Figure 4. Typical Reverse Characteristics
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AB
SOLDERABLE ENDS
1st BAND
D2
0.022 (0.56)
0.018 (0.46)
+0
D2 = D1 - 0.008 (0.20)
D1=
0.105
0.095
(2.67)
(2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185(4.7)
1st band denotes type and positive end (cathode)
Document Number 88548
03-Nov-06
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
Similar pages