ETC BYW29/D

BYW29−200
SWITCHMODE
Power Rectifiers
. . . designed for use in switching power supplies, inverters and as
free wheeling diodes, these state-of-the-art devices have the
following features:
•
•
•
•
•
•
•
http://onsemi.com
Ultrafast 35 Nanosecond Recovery Time
175°C Operating Junction Temperature
Popular TO-220 Package
Epoxy Meets UL94, VO @ 0.125 in
Low Forward Voltage
Low Leakage Current
High Temperature Glass Passivated Junction
ULTRAFAST
RECTIFIERS
8.0 AMPERES
200 V
Mechanical Characteristics:
1
• Case: Epoxy, Molded, Epoxy Meets UL 94, V-0
• Weight: 1.9 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
•
•
•
•
4
3
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Shipped 50 units per plastic tube
Marking: BYW29-200
Device Meets MSL1 Requirements
ESD Ratings: Machine Model, C (> 400 V)
Human Body Model, 3B (> 8000 V)
4
MARKING DIAGRAM
BYW29- 200
MAXIMUM RATINGS
Rating
1
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
200
V
Average Rectified Forward Current
Total Device, (Rated VR),
TC = 150°C
IF(AV)
8.0
A
Peak Repetitive Forward Current
(Rated VR, Square Wave, 20 kHz),
TC = 150°C
IFM
16
A
Nonrepetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Half - wave, Single Phase, 60 Hz)
IFSM
100
A
TJ, Tstg
- 65 to +175
°C
RJC
3.0
°C/W
Operating Junction Temperature and
Storage Temperature Range
3
CASE 221B
TO - 220AC
PLASTIC
BYW29- 200 = Device Code
ORDERING INFORMATION
Device
BYW29- 200
Package
Shipping
TO - 220
50 Units/Rail
THERMAL CHARACTERISTICS
Maximum Thermal Resistance, Junction
to Case
 Semiconductor Components Industries, LLC, 2003
June, 2003 - Rev. 0
1
Publication Order Number:
BYW29/D
BYW29 - 200
ELECTRICAL CHARACTERISTICS
Rating
Symbol
Maximum Instantaneous Forward Voltage (Note 1)
(iF = 5.0 A, TC = 100°C)
(iF = 20 A, TC = 25°C)
vF
Maximum Instantaneous Reverse Current (Note 1)
(Rated Dc Voltage, TJ = 100°C)
(Rated Dc Voltage, TJ = 25°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 A, di/dt = 50 A/s)
(IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A)
trr
Value
Unit
V
0.85
1.3
A
600
5.0
ns
35
25
1. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
BYW29 - 200
1000
100
IR, REVERSE CURRENT ( A)
70
50
20
10
100°C
1.0
25°C
0.1
10
0.01
7.0
0
20
40
60
120
140
180 200
160
Figure 2. Typical Reverse Current*
* The curves shown are typical for the highest voltage device in the
grouping. Typical reverse current for lower voltage selections can be
estimated from these same curves if VR is sufficiently below rated VR.
3.0
2.0
TJ = 175°C
100°C
25°C
1.0
0.7
0.5
0.3
0.2
0.1
0.2 0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
10
9.0
RATED VR APPLIED
8.0
dc
7.0
6.0
SQUARE WAVE
5.0
4.0
3.0
2.0
1.0
0
140
150
vF, INSTANTANEOUS VOLTAGE (V)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
RJA = 16°C/W
RJA = 60°C/W
(NO HEAT SINK)
dc
10
SQUARE WAVE
8.0
6.0
4.0
dc
2.0
SQUARE WAVE
0
0
20
40
60
80
100
120
140
180
170
Figure 3. Current Derating, Case
14
12
160
TC, CASE TEMPERATURE (°C)
Figure 1. Typical Forward Voltage
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
100
80
VR, REVERSE VOLTAGE (V)
5.0
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
30
TJ = 175°C
100
160
180
200
10
9.0
TJ = 175°C
8.0
7.0
SQUARE WAVE
6.0
dc
5.0
4.0
3.0
2.0
1.0
0
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
TA, AMBIENT TEMPERATURE (°C)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Current Derating, Ambient
Figure 5. Power Dissipation
http://onsemi.com
3
9.0
10
1.0
D = 0.5
0.5
0.2
0.1
0.1
0.05
0.01
ZJC(t) = r(t) RJC
RJC = 1.5 C/W MAX
P(pk)
0.05
t2
SINGLE PULSE
0.02
0.01
0.01
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT T1
t1
DUTY CYCLE, D = t1/t2
0.02
0.05
0.1
0.2
0.5
1.0
2.0
5.0
10
20
TJ(pk) − TC = P(pk) ZJC(t)
50
t, TIME (ms)
Figure 6. Thermal Response
1000
C, CAPACITANCE (pF)
r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED)
BYW29 - 200
TJ = 25°C
300
100
30
10
1.0
10
VR, REVERSE VOLTAGE (V)
Figure 7. Typical Capacitance
http://onsemi.com
4
100
100
200
500
1000
BYW29 - 200
PACKAGE DIMENSIONS
TO - 220 TWO - LEAD
CASE 221B - 04
ISSUE D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
C
B
Q
F
S
T
DIM
A
B
C
D
F
G
H
J
K
L
Q
R
S
T
U
4
A
1
U
3
H
K
L
R
D
G
J
http://onsemi.com
5
INCHES
MIN
MAX
0.595
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.190
0.210
0.110
0.130
0.018
0.025
0.500
0.562
0.045
0.060
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
MILLIMETERS
MIN
MAX
15.11
15.75
9.65
10.29
4.06
4.82
0.64
0.89
3.61
3.73
4.83
5.33
2.79
3.30
0.46
0.64
12.70
14.27
1.14
1.52
2.54
3.04
2.04
2.79
1.14
1.39
5.97
6.48
0.000
1.27
BYW29 - 200
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make
changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303 - 675- 2175 or 800 - 344- 3860 Toll Free USA/Canada
Fax: 303 - 675- 2176 or 800 - 344- 3867 Toll Free USA/Canada
Email: [email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
2- 9- 1 Kamimeguro, Meguro - ku, Tokyo, Japan 153 - 0051
Phone: 81 - 3- 5773- 3850
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
N. American Technical Support: 800 - 282- 9855 Toll Free USA/Canada
http://onsemi.com
6
BYW29/D