Honeywell BZ-2RW824-A2 Basic switches standard Datasheet

Interactive Catalog Replaces Catalog Pages
Honeywell Sensing and Control has replaced
the PDF product catalog with the new
Interactive Catalog. The Interactive Catalog is
a power search tool that makes it easier to find
product information. It includes more
installation, application, and technical
information than ever before.
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
Click this icon to try the new
Interactive Catalog.
Basic Switches
Standard
BZ/BA Series
STANDARD BASIC SWITCH CUT-A-WAY
The cut-a-way shown is representative of the standard basic switches described in this
catalog.
GENERAL INFORMATION
MICRO SWITCH standard basic switches
are precision snap-action mechanisms
enclosed in accurately molded plastic
cases. These switches are carefully manufactured and thoroughly inspected.
They are industry known for their compactness, light weight, accurate repeatability and long life.
Mounting holes for Types BZ, BM, BA, BE,
DT, MT, and 6AS switches accept pins or
screws of .139 inch (3,53 mm) diameter.
Characteristics as stated are taken at normal room temperature and humidity.
These may vary as temperature and humidity conditions differ.
GENERAL SWITCH IDENTIFICATION
Standard
Basic Switches
MOUNTING DIMENSIONS
Mounting dimensions are included at the
end of each product section. They are
shown in English and metric equivalents.
These dimensions are for reference only.
For exacting layout work, request an engineering layout work, request an engineering drawing from the 800 number.
The type BZ switch design meets most
applications needs. Modifications of the
standard silver contact design and material, spring configuration, and plunger locations give the type BM, BA and BE
switches greater electrical load handling
capacity. Other changes in materials and
switch design provide operating characteristics, temperature tolerances, and
sealing to cover a wide range of special
requirements.
FEATURES
1 Operating force as low as 4 oz. (113
grams) maximum
1 Sensitive differential travel as low as
.0002 to .0003 inches (0,005 to 0,008
mm)
1 Power load switching capability to 25
amperes
1 Motor handling capacity to 2 horsepower at 250 VAC
1 Long mechanical life
1 High temperature constructions for up
to +400°F (204°C)
1 Momentary or maintained contact
action
1 Alloy contacts available for special application needs
1 Variety of integral actuators
1 Variety of auxiliary actuators
1 Variety of terminal designs
1 Optional sealed plunger and cover
1 Stainless steel snap spring available
1 Military standard construction available with over 50 listings on the MILS-8805 Qualified products list
1 UL recognized, CSA certified
First letter in catalog listing designates:
B = Single-pole double-throw
W = Single-pole single-throw (normally closed)
Y = Single-pole single-throw (normally open)
Second letter in catalog listing designates:
Z = Standard 15-amp version
M = 22-amp version
A = Standard 20-amp version
E = 25-amp version
RECOMMENDED TORQUE (max.)
Mounting screws . . . . . . . . . . . . 3 in./lbs.*
Terminal screws . . . . . . . . . . . . . . 4 in./lbs.
Panel mount bushing . . . . . . . 4-6 in./lbs.
*Note: Tightening mounting screws
above 3 in./lbs. changes operating characteristics and increases
the possibility of cracking the
case.
This section covers only over 100 of our most popular BZ/BA type Series
catalog listings. If you don’t find what you’re looking for, it’s likely one of
the approximately 1800 other active listings will meet your needs. Contact the 800 number.
UL/CSA
Our basic switches are Component Recognized by Underwriters’ Laboratories, Inc. and certified by Canadian Standards Association. The BA, BZ, and BM line is covered as Special Use Switches to UL Standard 1054; the BE line is covered as an Industrial Motor
Controller to UL Standard 508.
Agency File References
are:
BA
BM
BZ
BE-1,2,5
BE-R
For application help: call 1-800-537-6945.
UL File E12252, issued 12-09-88
UL File E12252, issued 12-08-88
UL File E12252, issued 6-29-89
UL File E22779, Vol. 4, Sec. 1
UL File E22779, Vol. 4, Sec. 2
Honeywell Sensing and Control
47
Basic Switches
Standard
BZ/BA Series
AVAILABLE TERMINALS
Most of the BZ/BA catalog listings have
A2 type terminals. Several other terminal
styles are shown and others are available.
Specific information should be requested
from the 800 number or local Authorized
Distributor.
Solder (No suffix)
Use up to #14 wire
A2
Bottom facing 6-32 NC × .218N
screw with cup washers
A4
(Same as A2 except #8 screws)
D6
.250N (6,35 mm) wide × .032N (0,81 mm) thick
quick-connect
D5
.250N (6,35 mm) wide × .030N (7,62) thick
quick-connect
T
Bottom facing 6-32 NC × .218N screw
with Sems lockwashers
P4
Side facing 8-32 × .218N screw with cup washers
PC2
Self lifting pressure plate terminals and plastic
barriers for added dielectric protection
ACTUATORS
BA, BE, BM and BZ standard basic
switches use the actuators described.
48
Pin plunger; in-line motion
Overtravel plunger; in-line
applications requiring additional
overtravel
Roller lever; Very low force, fast
moving cams
Roller leaf; Low-force, large
movement actuation
Honeywell Sensing and Control
Added overtravel in a panel mount
roller plunger; Actuation by cams
Leaf; Low-force, slow moving cams or
slides
Lever; Very low force, slow cams and
slides
Added overtravel in a panel-mount
plunger; Heavy-duty in-line
applications or slow cams.
Cam rise should not exceed 30°
For application help: call 1-800-537-6945.
Basic Switches
Standard
BZ/BA Series
Characteristics: O.F. — Operating Force; R.F. — Release Force; P.T.
— Pretravel; O.T. — Overtravel; D.T. — Differential Travel; O.P. —
Operating Position.
ORDER GUIDE by ascending electrical capability
PIN PLUNGER
Catalog
Listing
BZ/BA TYPE
Dim. Dwg. Fig. 1
Electrical
Data And
O.F.
R.F. min. P.T. max. O.T. min.
UL Codes newtons newtons
mm
mm
Recommended For Page 46
ounces ounces inches
inches
Applications requiring
gold alloy contacts
1 Amp
P
2,5-3,61
9-13
1,11
4
0,38
.015
0,13
.005
0,01-0,05
.0004-.0020
15,88
.625
BZ-2R725551-A2
Gold alloy contacts
Dustproof and splash
resistant seal
1 Amp
P
2,22-4,17
8-15
1,11
4
—
—
0,13
.005
0,01-0,06
.0004-.0025
15,88
.625
BZ-2R244-A2
Operating in temp. to
+400°F (204°C) for
100 hours
5 Amps
B
2,5-3,61
9-13
1,11
4
0,38
.015
0,13
.005
0,01-0,05
.0004-.0020
15,88
.625
BZ-R21-A2
Lower force
10 Amps
C
1,11
4
0,7
2.5
0,30
.012
0,13
.005
0,005-0,013
.0002-.0005
15,88
.625
BZ-2R-A2
Most applications
SPDT
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
0,13
.005
0,01-0,05
.0004-.0020
15,88
.625
WZ-2R-A2
SPST (normally
closed)
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
0,13
.005
0,01-0,05
.0004-.0020
15,88
.625
YZ-2R-A2
SPST (normally open)
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
0,13
.005
0,01-0,05
.0004-.0020
15,88
.625
BZ-R-A2
Less differential travel
15 Amps
D
1,95-2,5
7-9
1,11
4
0,30
.012
0,13
.005
0,005-0,008
.0002-.0003
15,88
.625
BZ-R19-A2
Best repeatability
15 Amps
D
1,95-3,34
7-12
1,11
4
0,30
.012
0,13-0,2
0,005-0,02
.005-.008 .0002-.0008
16,26
.640
BZ-2R24-A2
Operating in temp. to
+250°F (121°C)
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
0,13
.005
0,01-0,05
.0004-.0020
15,88
.625
BZ-2RT04
(8805/1-004)
MIL-S-8805 application
requirements
15 Amps
A
2,5-3,61
9-13
1,67
6
0,38
.015
0,13
.005
0,01-0,05
.0004-.0020
15,88
.625
BZ-2R05-A2
Best stability under
varying humidity
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
0,13
.005
0,01-0,05
.0004-.0020
15,88
.625
BZ-2R5551-A2
Dustproof and splash
resistant seal
15 Amp
A
2,5-4,17
9-15
1,11
4
—
—
0,13
.005
0,01-0,06
.0004-.0025
15,88
.625
BZ-2R55-A2-S
Best service for sealed
construction. Stainless
steel internal snap
spring.
15 Amps
A
2,5-4,17
9-15
1,11
4
—
—
0,13
.005
0,01-0,06
.0004-.0025
15,88
.625
BA-2R-A2
Up to 20 ampere load
handling
20 Amps
G
3,89-6,12
14-22
2,78
10
1,27
.050
0,25
.010
0,05-0,19
.0020-.0075
16,26
.640
BA-2R24-A2
Operating in
temperature to +250°F
(121°C)
20 Amps
G
3,89-6,12
14-22
2,78
10
1,27
.050
0,25
.010
0,05-0,19
.0020-.0075
16,26
.640
BM-1R-A2
Up to 22 ampere load
handling
22 Amps
F
1,95-2,78
7-10
1,11
4
0,38
.015
0,13
.005
0,013-0,025
.0005-.0010
15,88
.625
BE-2R-A4
Up to 25 ampere load
handling
25 Amps
H
3,89-6,12
14-22
2,78
10
1,27
.050
0,25
.010
0,05-0,19
.0020-.0075
16,26
.640
BZ-RX
Manual reset
(maintained contact)
applications, solder
terminals
15 Amps
E
1,95-2,5
7-9
0,56-2,78*
2-10
—
—
—
—
0,30
.012
—
—
0,13
.005
0,38*
.015
—
—
15,88
.625
WA-1RX-A4
Manual reset SPSTNC, A4 terminals
20 Amps
W
5,56
20
6,95*
25
—
—
—
—
—
—
—
—
0,25
.010
—
—
0,20
.008
—
—
16,26
.64
27,9*
1.10
Dim. Dwg. Fig. 3
Dim. Dwg. Fig. 4
Except where stated ** ±0,38mm
±.015 in.
*Reset characteristics.
All catalog listings shown are not
necessarily stock items. Stocking
depends on sales experience.
For application help: call 1-800-537-6945.
Auxiliary actuators see p. 62-63.
Honeywell Sensing and Control
49
Standard
Basic Switches
BA/BE TYPE
O.P.**
mm
inches
BZ-2R72-A2
SEALED TYPE
Dim. Dwg. Fig. 2
D.T.
mm
inches
Basic Switches
Standard
BZ/BA Series
Characteristics: O.F. — Operating Force;
R.F. — Release Force; P.T. — Pretravel;
O.T. — Overtravel; D.T. — Differential Travel;
O.P. — Operating Position.
OVERTRAVEL
PLUNGER
ORDER GUIDE
Catalog Listing
Recommended For
Electrical
Data and
UL Codes
Page 46
O.F.
newtons
ounces
R.F. min.
newtons
ounces
P.T. max.
mm
inches
O.T. min.
mm
inches
D.T.
mm
inches
O.P.*
mm
inches
BZ-2RD72-A2
Applications requiring gold
alloy contacts
1 Amp
P
2,5-3,61
9-13
1,11
4
0,38
.015
1,52
.060
0,01-0,05
.0004.0020
21,21
.835
BZ-2RD-A2
Added overtravel. For
manual operation and slow
20° (max) cam rise
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
1,52
.060
0,01-0,05
.0004.0020
21,21
.835
BZ-2RD24-A2
Operating in temperature
to +250°F (121°C)
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
1,52
.060
0,01-0,05
.0004.0020
21,21
.835
BM-1RD-A2
Up to 22 ampere load
handling
22 Amps
F
1,95-2,78
7-10
1,11
4
0,38
.015
1,52
.060
0,013-0,025
.0005.0010
21,21
.835
BZ-2RDS725551-A2
Applications requiring gold
alloy contacts plus
dustproof and splash
resistant seal
1 Amp
P
3,61-5,28
13-19
1,11
4
—
1,52
.060
0,01-0,063
.0004.0025
28,20
1.110
Dustproof and splash
resistant seal
15 Amps
A
3,61-5,28
13-19
1,11
4
—
1,52
.060
0,01-0,063
.0004.0025
28,20
1.110
BA-2RB-A2
Up to 20 ampere load
handling
20 Amps
G
3,89-6,12
14-22
2,78
10
1,27
.050
2,39
.094
0,05-0,19
.0020.0075
26,20
1.03
BE-2RB-A4
Up to 25 ampere load
handling
25 Amps
H
3,89-6,12
14-22
2,78
10
1,27
.050
2,39
.094
0,05-0,19
.0020.0075
26,20
1.03
BZ-2RS72-A2
Applications requiring gold
alloy contacts
1 Amp
P
2,5-3,61
9-13
1,11
4
0,38
.015
1,52
.060
0,01-0,05
.0004.0020
28,20
1.110
BZ-2RS-A2
Added overtravel. For
in-line operation and with JR
auxiliary actuators
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
1,52
.060
0,01-0,063
.0004.0025
28,20
1.110
BZ-2RS24-A2
Operating in temperature
to +250°F (121°C)
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
1,52
.060
0,01-0,05
.0004.0020
28,20
1.110
MIL-S-8805 application
requirements
15 Amps
A
2,5-3,61
9-13
1,67
6
0,38
.015
1,52
.060
0,01-0,05
.0004.0020
28,20
1.110
BZ-RSX
Manual reset
solder terminals
15 Amps
E
1,95-2,64
7-9
—
—
0,30
.012
0,64
.025
—
—
2,79
1.11
BM-1RS-A2
Up to 22 ampere load
handling
22 Amps
F
1,95-2,78
7-10
1,11
4
0,38
.015
1,52
.060
0,013-0,025
.0005.0010
28,20
1.110
BZ-2RS7225551-A2
Applications requiring gold
alloy contacts plus
dustproof and splash
resistant seal
1 Amp
P
2,5-4,17
9-15
1,11
4
—
1,52
.060
0,01-0,063
.0004.0025
28,20
1.110
15 Amps
A
2,5-4,17
9-15
1,11
4
—
1,52
.060
0,01-0,063
.0004.0025
28,20
1.110
Dim. Dwg. Fig. 11
BZ-2RDS5551-A2
Dim. Dwg. Fig. 12
Dim. Dwg. Fig. 13
BZ-2RST04
(M8805/1-012)
Dim. Dwg. Fig. 14
BZ-2RS5551-A2
Dustproof and splash
resistant seal
*±0,51 mm
±.020 in.
Dim. Dwg. Fig. 15
50
Honeywell Sensing and Control
For application help: call 1-800-537-6945.
Basic Switches
Standard
OVERTRAVEL
PLUNGER
BZ/BA Series
ORDER GUIDE
Catalog Listing
Recommended For
Electrical
Data and
UL Codes
Page 46
O.F.
newtons
ounces
R.F. min.
newtons
ounces
P.T. max.
mm
inches
O.T. min.
mm
inches
D.T.
mm
inches
O.P.**
mm
inches
BZ-2RQ-A2
Added overtravel. For
manual in-line operation and
for slow 30° (max) rise cams
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
5,56
.219
0,01-0,05
.0004.0020
38,10±0,51
1.500±.020
BZ-2RQ24-A2
Operating in temperature
to ±250°F (121°C)
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
5,56
.219
0,01-0,05
.0004.0020
38,10±0,51
1.500±.020
BZ-2RQ172-A2
Applications requiring gold
alloy contacts
1 Amp
P
2,5-3,61
9-13
1,11
4
0,38
.015
5,56
.219
0,01-0,05
.0004.0020
21,82
.859
BZ-2RQ1-A2
BZ-2RQ-A2 type applications
with panel mount
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
5,56
.219
0,01-0,05
.0004.0020
21,82
.859
MIL-S-8805 application
requirements
15 Amps
A
2,5-3,61
9-13
1,67
6
0,38
.015
5,56
.219
0,01-0,05
.0004.0020
21,82
.859
BZ-2RQ124-A2
Operating in temperature
to ±250°F (121°C)
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
5,56
.219
0,01-0,05
.0004.0020
21,82
.859
BZ-2RN702
Furnished with
unassembled seal
boot.
15 Amps
X
2,5-3,61
9-13
1,11
4
0,38
0.15
3,18
.125
0,01-0,05
.0004.0020
48,4±0,50
1.906±.020
BZ-RQ1X
Manual reset.
Solder terminals
15 Amps
E
1,67-2,64
6-9.5
–
–
0,30
0.12
5,56
.219
–
–
23,42±1,14
.922±.045
7,14*
.281*
BA-2RQ1-A2
Up to 20 ampere load
handling
20 Amps
G
3,89-6,12
14-22
2,78
10
1,27
.050
5,56
.219
0,05-0,19
.0020.0075
21,82
.859
BM-1RQ1-A2
Up to 22 ampere load
handling
22 Amps
F
1,95-2,78
7-10
1,11
4
0,38
.015
5,56
.219
0,0130,025
.0005.0010
21,82
.859
BZ-2RQ1872-A2
Applications requiring gold
alloy contacts
1 Amp
P
2,5-3,61
9-13
1,11
4
0,38
.015
3,56
.140
0,01-0,05
.0004.0020
33,32±1,14
1.312±.045
BZ-2RQ18-A2
Added overtravel. Roller
plunger for rapid cam (30°
max) rise and slide
operation. Panel mount
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
3,56
.140
0,01-0,05
.0004.0020
33,32±1,14
1.312±.045
BZ-2RQ1824-A2
Operating in temperature
to ±250°F) (121°C)
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
3,56
.140
0,01-0,05
.0004.0020
33,32±1,14
1.312±.045
BZ-2AQ18T1
Double-break
circuitry
15 Amps
T
3,89-6,68
14-24
1,11
4
0,51
.020
3,58
.141
0,03-0,10
.001-.004
33,35±1,19
1.313±.047
BM-1RQ18-A2
Up to 22 ampere load
handling
22 Amps
F
1,95-2,78
7-10
1,11
4
0,38
.015
3,56
.140
0,0130,025
.0005.0010
33,32±1,14
1.312±.045
BZ-2RQ181-A2
Applications requiring
roller plunger 90° to major
axis of switch
15 Amps
A
2,5-3,61
9-13
1,11
4
0,38
.015
3,56
.140
0,01-0,05
.0004.0020
33,32±1,14
1.312±.045
Dim. Dwg. Fig. 16
BZ/BM TYPE
BZ-2RQ1T04
(M8805/1-020)
Dim. Dwg. Fig. 17
BA TYPE
Dim. Dwg. Fig. 19
* Reset characteristics.
Dim. Dwg. Fig. 20
For application help: call 1-800-537-6945.
Except where stated ** ±0,76 mm
±.030 in.
Honeywell Sensing and Control
51
Standard
Basic Switches
Dim. Dwg. Fig. 18
Basic Switches
Standard
BZ/BA Series
Characteristics: O.F. — Operating Force; R.F. — Release Force;
P.T. — Pretravel; O.T. — Overtravel; D.T. — Differential Travel;
O.P. — Operating Position.
STRAIGHT LEVER
ORDER GUIDE
Recommended
For
Catalog Listing
BZ-2RW8072-A2
D.T.
mm
inches
O.P.**
mm
inches
1 Amp
P
0,7
2.5
0,14
0.5
—
5,56
.219
0,18-1,27
.007-.050
19,1
.750
Best stability under
varying humidity.
Gold alloy contacts
with seal
1 Amp
P
0,7
2.5
0,14
0.5
—
5,56
.219
0,18-1,27
.007-.050
19,1
.750
Operating in temp.
to +400°F (204°C)
for 100 hours
5 Amps
B
0,7
2.5
0,14
0.5
—
5,56
.219
0,18-1,27
.007-.050
19,1
.750
Lowest operating
force (without
external return
spring)
10 Amps
I
0,07
.25
—
6,76
.266
5,56
.219
0,08-0,38
.003-.015
19,1
.750
1.25 inch lever
requirements
15 Amps
A
1,67
6
0,42
1.5
—
0,42
.141
0,10-0,63
.004-.025
19,1
.750
2.5 inch lever
requirements
15 Amps
A
0,7
2.5
0,14
0.5
—
5,56
.219
0,18-1,27
.007-.050
19,1
.750
BZ-2RW84-A2
Lower force (without
external return
spring)
15 Amps
A
0,28
1
0,03
0.125
8,33
.328
5,56
.219
0,18-1,27
.007-.050
19,1
.750
BZ-2RW805551-A2
Dustproof and
splash resistant seal
15 Amps
A
0,7
2.5
0,14
0.5
—
5,56
.219
0,18−1,27
.007-.050
19,1
.750
MIL-S-8805
application
requirements
15 Amps
A
0,28-0,90
1-3.25
0,21
0.75
7,52
.296
4,37
.172
2,36
.093
19,1
.750
Operating in
temperature to
+250°F (121°C)
15 Amps
A
0,7
2.5
0,14
0.5
—
5,56
.219
0,18-1,27
.007-.050
19,1
.750
BZ-RW80X
Manual reset solder
terminals
15 Amps
E
0,63
2.25
—
—
—
—
5,56
.219
0,38*
.015
—
—
–
–
19,05
.750
7,14*
.281
BZ-2RW863-A2
6 inch lever
requirements
15 Amps
A
0,28
1
—
—
12,7
.500
BA-2RV-A2
Up to 20 ampere
load handling
20 Amps
G
0,7
2.5
0,14
0.5
15,88
.625
1,98
.078
2,77
.109
19,1
.750
BM-1RW84-A2
Up to 22 ampere
load handling
22 Amps
F
0,28
1
0,03
0.125
7,54
.297
5,56
.219
0,13-0,84
.005-.033
19,1
.750
BE-2RV-A4
Up to 25 ampere
load handling
25 Amps
H
0,7
2.5
0,14
0.5
15,88
.625
1,98
.078
2,77
.109 max.
19,1
.750
Adjustable
operating point (17
mm to 22 mm) .670N
to .880N
15 Amps
A
0.7
2.5
0.14
0.5
—
3,54 †
.125
0,18-1,27 17,02-22,35
.007-.050 .670-.880
Reverse acting
actuator (switch
plunger depressed
in free position)
15 Amps
A
1,67
6
0,28
1
5,56
.219
5,56
.219
0,10-0,89
.004-.035
BZ-2RW80722555105-A2
BZ-2RW8244-A2
BZ-RW8435-A2
Dim. Dwg. Fig. 21
BZ-2RW876T
BZ-2RW80-A2
BA TYPE
BZ-2RWT04
(M8805/1-044)
BZ-2RW824-A2
ADJUSTABLE
O.T. min.
mm
inches
Applications
requiring gold alloy
contacts
BZ/BM TYPE
Dim. Dwg. Fg. 23
Electrical
Data and O.F. max. R.F. min. P.T. max.
UL Codes newtons newtons
mm
Page 46
ounces ounces inches
* Reset characteristics.
BZ-2RW899-A2
BZ-2RM-A2
Dim. Dwg. Fg. 22
† From17 mm O.P.
.670 in.
Honeywell Sensing and Control
19,1
.750
Except where stated ** ±0.76 mm
±.030 in.
Dim. Dwg. Fig. 24
52
0,46-3,68 19,1±1,52
.018-.145 .750±.060
For application help: call 1-800-537-6945.
Basic Switches
Standard
BZ/BA Series
SIMULATED ROLLER
ORDER GUIDE
Catalog
Listing
BZ-2RW80147-A2
Electrical
Data And
UL Code
Recommended For Page 46
O.F.
R.F.
P.T.
max.
min.
max.
newtons newtons
mm
ounces ounces inches
O.T.
min.
mm
inches
D.T.
mm
inches
O.P.**
mm
inches
30,17
1.188
1.05 inch (26,7 mm)
(simulated roller)
lever applications
15 Amps
A
1,67
6
0,42
1.5
—
2,39
.094
0,08-0,51
.003-.020
1.90 inch (48,3 mm)
(simulated roller)
lever applications
15 Amps
A
0,97
3.5
0,21
0.75
—
3,96
.156
0,10-1,0 30,17±0,76
.004-.040 1.188±.030
Applications
requiring gold alloy
contacts
1 Amp
P
1,67
6
0,42
1.5
—
2,39
.094
0,08-0,51
.003-.020
30,17
1.188
Applications
requiring gold alloy
contacts plus
dustproof and splash
resistant seal
1 Amp
P
1,67
6
0,42
1.5
—
2,39
.094
0,08-0,51
.003-.020
30,17
1.188
1.05 inch (26,7 mm)
(steel roller) lever
applications
15 Amps
A
1,67
6
0,42
1.5
—
2,39
.094
0,08-0,51
.003-.020
30,17
1.188
BZ-2RW8222-A2
Roller turned 90°
15 Amps
A
0,7-1,81
2.5-6.5
0,35
1.25
—
3,58
.141 max.
0,08-0,51
.003-.020
30,75
1.25
BZ-2RW82224-A2
Operating in
temperature to
+250°F (121°C)
15 Amps
A
1,67
6
0,42
1.5
—
2,39
.094
0,08-0,51
.003-.020
30,17
1.188
Dustproof and
splash resistant seal
15 Amps
A
1,67
6
0,42
1.5
—
2,39
.094
0,08-0,51
.003-.020
30,17
1.188
Best service for
sealed construction.
Stainless steel
internal snap spring.
15 Amps
A
1,67
6
0,42
1.5
—
2,39
.094
0,08-0,51
.003-.020
30,17
1.188
BA-2RV22-A2
Up to 20 ampere
load handling
20 Amps
G
1,67
6
0,42
1.5
6,35
.250
0,76
.030
1,14
.045 max.
29,77
1.172
BM-1RW822-A2
Up to 22 ampere
load handling
22 Amps
F
1,67
6
0,42
1.5
—
2,39
.094
0,025-0,33
.001-.013
30,17
1.188
BE-2RV22-A4
Up to 25 ampere
load handling
25 Amps
H
1,67
6
0,42
1.5
6,35
.250
0,76
.030
1,14
.045 max.
29,77
1.172
BZ-2RW82299-A2
Adjustable operating
point. Roller lever
1.05 inch (26,7 mm)
15 Amps
A
1,67
6
0,42
1.5
—
1,02
.040
0,08-0,51 29,77-30,56
.003-.020 1.172-1.203
Adjustable operating
point. Roller lever
1.90 inch (48,3 mm)
15 Amps
A
0,97
3.5
0,21
0.75
—
2,16
.085
0,10-1,0
.004-.040
BZ-2RW80196-A2
Dim. Dwg. Fig. 27
ROLLER LEVER
BZ-2RW82272-A2
BZ-2RW822725551-A2
BZ/BM TYPE
BZ-2RW822-A2
Dim. Dwg. Fig. 25
BZ-2RW8225551-A2
Dim. Dwg. Fig. 28
BA/BE TYPE
BZ-2RW8299-A2
29,2-31,5
1.150-1.24
Dim. Dwg. Fig. 26
Except where stated * ±0,38 mm
±.015 in.
For application help: call 1-800-537-6945.
Honeywell Sensing and Control
53
Standard
Basic Switches
BZ-2RW82255-A2-S
Basic Switches
Standard
ROLLER LEVER
BZ/BM TYPE
BZ/BA Series
ORDER GUIDE
Catalog
Listing
Recommended
For
BZ-2RW82725551-A2
Applications requiring
gold alloy contacts,
plus dustproof, and
splash resistant seal
BA/BE TYPE
Dim. Dwg. Fig. 30
Electrical
Data And
UL Code
Page 46
O.F.
R.F.
max.
min.
newtons newtons
ounces ounces
P.T.
max.
mm
inches
O.T.
min.
mm
inches
D.T.
mm
inches
O.P.*
mm
inches
1 Amp
P
0,97
3.5
0,21
0.75
—
3,96
.156
0,10-1,0
.004-.040
30,17±0,76
1.188±.030
1.90 inch (48,3 mm)
(steel roller) lever
applications
15 Amps
A
0,97
3.5
0,21
0.75
—
3,96
.156
0,10-1,0
.004-.040
30,17±0,76
1.188±.030
Dustproof and splash
resistant seal
15 Amps
A
0,97
3.5
0,21
0.75
—
3,96
.156
0,10-1,0
.004-.040
30,17±0,76
1.188±.030
Operating in
temperature to
+250°F (121°C)
15 Amps
A
0,97
3.5
0,21
0.75
—
3,96
.156
0,10-1,0
.004-.040
30,17±0,76
1.188±.030
BA-2RV2-A2
Up to 20 ampere load
handling
20 Amps
G
0,97
3.5
0,14
0.5
11,89
.468
1,52
.060
2,16
.085
30,17±0,76
1.188±.030
BM-1RW82-A2
Up to 22 ampere load
handling
22 Amps
F
0,97
3.5
0,21
0.75
—
3,96
.156
0,08-0,56
.003-.022
30,17±0,76
1.188±.030
Up to 25 ampere load
handling
25 Amps
H
0,97
3.5
0,14
0.5
11,89
.468
1,52
.060
2,16
.085 max.
30,17±0,76
1.188±.030
BZ-2RW82-A2
Dim. Dwg. Fig. 29
Characteristics:
O.F. — Operating Force; R.F. — Release Force; P.T. — Pretravel;
O.T. — Overtravel; D.T. — Differential Travel;
O.P. — Operating Position.
BZ-2RW825551-A2
BZ-2RW8224-A2
BE-2RV2-A4
NOTE: For adjustable operate point and simulated roller lever switches, refer to previous page.
BZ-RW922-A2
Best repeatability and
O.P. stability
10 Amps
I
3,34
12
1,11
4
0,38
.015
2,54
.100
0,013-0,025
.0005-.0010
31,37
1.235
BZ-2RW826-A2
One-way roller (9,4
mm H 3,8 mm) .37N
dia. H .15N wide roller
15 Amps
A
1,67
6
0,42
1.5
—
2,39
.094
0,08-0,51
.003-.020
41,34
1.625
One-way roller (4,83
mm H 4,83 mm) .19N
dia. H .19N wide roller
15 Amps
A
2,22
8
0,42
1.5
—
1,52
.060
0,38
.015
28,96
1.14
Dim. Dwg. Fig. 31
BZ-2RW825-A2
Dim. Dwg. Fig. 32
54
Honeywell Sensing and Control
Except where stated * ±0,38 mm
±.015 in.
For application help: call 1-800-537-6945.
Basic Switches
Standard
FLEXIBLE LEAF
BZ/BA Series
ORDER GUIDE
Electrical
Data and
UL Codes
Page 46
O.F. max.
newtons
ounces
Force and stability of the
flexible leaf actuator
15 Amps
A
1,39
5
0,14
0.5
–
1,52
.060
1,27
.050
17,48
.688
Dustproof and splash
resistant seal
15 Amps
A
1,95
7
0,14
0.5
–
1,52
.060
1,27
.050
17,48
.688
BZ-2RLT04
(M8805/1-001)
MIL-S-8805 application
requirements
15 Amps
A
1,39
5
0,14
0.5
–
1,52
.060
1,27
.050
17,48
.688
BZ-2RL24-A2
Operating in temperature
to +250°F (121°C)
15 Amps
A
1,39
5
0,14
0.5
–
1,52
.060
1,27
.050
17,48
.688
BZ-RLX
Manual reset.
Solder terminals
15 Amps
E
0,83
3
–
–
–
–
1,57
.062
0,38*
.015
–
–
–
–
17,48
.688
7,14*
.281
BA-2RL-A2
Up to 20 ampere load
handling
20 Amps
G
2,5
9
0,28
1
–
1,57
.062
1,57
.062
17,48
.688
Up to 25 ampere load
handling
25 Amps
H
2,5
9
0,28
1
–
1,57
.062
1,57
.062
17,48
.688
Electrical
Data and
UL Codes
Page 46
O.F. max.
newtons
ounces
Operating in temp. to
+250°F (121°C)
for 100 hours
5 Amps
B
1,39
5
0,14
0.5
–
1,52
.060
1,27
.050
28,6
1.125
Force and stability of the
flexible leaf with roller
15 Amps
A
1,39
5
0,14
0.5
–
1,52
.060
1,27
.050
28,6
1.125
Dustproof and splash
resistant seal
15 Amps
A
1,95
7
0,14
0.5
–
1,52
.060
1,27
.050
28,6
1.125
BZ-2RL2T04
(M8805/1-036)
MIL-S-8805 application
requirements
15 Amps
A
1,04-1,39
3.75-5
0,14
0.5
–
1,52
.060
1,27
.050
28,6
1.125
BA-2RL2-A2
Up to 20 ampere load
handling
20 Amps
G
2,5
9
0,28
1
–
1,52
.060
1,65
.065
28,6
1.125
Up to 25 ampere load
handling
25 Amps
H
2,5
9
0,28
1
–
1,52
.060
1,65
.065
28,6
1.125
Catalog Listing
BZ TYPE
BZ-2RL-A2
BZ-2RL5551-A2
Dim. Dwg. Fig. 33
BA/BE TYPE
Dim. Dwg. Fig. 34
BE-2RL-A4
FLEXIBLE
ROLLER LEAF
BZ TYPE
Catalog Listing
BZ-2RL25551-A2
BA/BE TYPE
BE-2RL2-A4
Recommended For
R.F. min. P.T. max. O.T. min. D.T. max.
newtons
mm
mm
mm
ounces
inches
inches
inches
* Reset characteristics
For application help: call 1-800-537-6945.
O.P.*
mm
inches
** ±0.76 mm
±.030 in.
Honeywell Sensing and Control
55
Standard
Basic Switches
BZ-2RL2-A2
Dim. Dwg. Fig. 36
O.P.**
mm
inches
ORDER GUIDE
BZ-RL24-A2
Dim. Dwg. Fig. 35
Recommended For
R.F. min. P.T. max. O.T. min. D.T. max.
newtons
mm
mm
mm
ounces
inches
inches
inches
Basic Switches
Standard
BZ/BA Series
GENERAL INFORMATION
SPECIAL CIRCUITRY SWITCHES
‘‘Special sequence’’ switches provide unusual circuit control. A make-beforebreak switch provides circuit continuity
while switching from N.C. to N.O. In another make-before-make switch, upon
actuation, one circuit is made an interval
before the second circuit. Another switch
provides a single pulse or momentary
closure of the contacts with each cycle of
operation.
Double break versions can interrupt greater inductive loads and feature shorting
bar construction. A split contact version
allows control of the two isolated circuits.
Characteristics: O.F. – Operating Force;
R.F. – Release Force; P.T. – Pretravel;
O.T. – Overtravel; D.T. – Differential Travel;
O.P. – Operating Position.
PIN PLUNGER
ORDER GUIDE
Catalog Listing
BZ-2G-A2
Dim. Dwg. Fig 5
Unoperated
Intermediate
6BS1-B
Recommended For
Make-before-break
contact action
Fully
Operated
Make-before-make
contact action
Electrical
Data and
UL Codes
Page 46
O.F.
newtons
ounces
10 Amps
C
5,56
20 max.
R.F. min. P.T. max. O.T. min.
newtons
mm
mm
ounces
inches
inches
2,22
8
Intermediate
Release
10 Amps
R
9,73
35 max.
0,76
.030
D.T.
mm
inches
O.P.*
mm
inches
0,13
.005
0,38
.015
15,9
.625
–
–
–
Fully
Released
2,78
10
–
Dim. Dwg. Fig. 6
*±0,38 mm
± .015 in.
10BS210
Adjustable
differential travel
20 Amps
Y
3,10-5,56
11-20
2,78
10
–
0,25
.010 at
max.
setting
0,04-0,06
.0015-.0025
0,18
.007 at max.
setting
Dim. Dwg. Fig. 4-A
56
Honeywell Sensing and Control
For application help: call 1-800-537-6945.
16,3
.64
Basic Switches
Standard
BZ/BA Series
PIN PLUNGER —
SPECIAL CIRCUITRY
ORDER GUIDE
Recommended For
Electrical
Data and
UL Codes
Page 46
BZ-3AT
Double-break, low
voltage DC applications
15 Amps
T
4,45-7,23
16-26
1,11
4
0,76
.030
0,13
.005
0,051-0,13
.002-.005
15,9
.625
BZ-2AW80T
As above, with
2.5 inch lever
15 Amps
T
0,90
3.25
0,14
.25
–
–
5,56
.219
0,51
2.54
19,05±0,76
.750±.030
BZ-2AW82T
As above, with
1.9 inch roller lever
15 Amps
T
1,25
4.5
0,21
.75
–
–
3.96
.156
0,38-1,91
.015-.075
30,18±0,76
1.188±.030
BZ-2AW822T
As above, with
1.05 inch roller lever
15 Amps
T
2,36
8.5
0,42
1.5
–
–
2,39
.094
0,20-2,39
.008-.030
30,18±0,76
1.188±.030
BA-3ST
Double-break, low
voltage DC applications
25 Amps
M
7,23-10,6
26-38
2,78
10
1,65
.065
0,25
.010
0,18-0,38
.007-.015
16,3
.640
BZ-3YT
(MS25383-1)
MIL-S-8805 application
requirements. (split
contact)
5 Amps
U
4,45-7,23
16-26
1,11
4
0,76
.030
0,13
.005
0,025-0,1
.001-.004
15,9
.625
BZ-3YWT80
As above, with
2.50 inch lever
5 Amps
U
0,97
3.5
0,14
.5
–
–
5,56
.219
0,51-2,54
.020-.100
19,05±0,76
.750±.030
BZ-3YWT82
As above, with
1.9 inch roller lever
5 Amps
U
1,25
4.5
0,21
.75
–
–
3,96
.156
0,38-1,91
.015-.075
30,18±0,76
1.188±.030
BZ-3YWT822
As above, with
1.05 inch roller lever
5 Amps
U
1,95
7
0,42
1.5
–
–
2,39
.094
0,20-1,02
.008-.040
30,19
.188
Catalog Listing
Dim. Dwg. Fig. 8
O.F.
newtons
ounces
R.F. min. P.T. max. O.T. min.
newtons
mm
mm
ounces
inches
inches
D.T.
mm
inches
O.P.*
mm
inches
Dim. Dwg. Fig. 9
Except where stated * ±0,38 mm
±.015 in.
For application help: call 1-800-537-6945.
Honeywell Sensing and Control
57
Standard
Basic Switches
Dim. Dwg. Fig. 10
Basic Switches
Standard
BZ/BA Series
MOUNTING DIMENSIONS (For reference only)
PIN PLUNGERS
BZ/BM
BA/BE
Fig. 1
Fig. 2
Fig. 4
Fig. 4-A
Fig. 3
PIN PLUNGERS — SPECIAL
CIRCUITRY
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Mounting holes accept pins or screws of
.139 N (3,53 mm) diameter.
58
Honeywell Sensing and Control
For application help: call 1-800-537-6945.
Basic Switches
Standard
BZ/BA Series
MOUNTING DIMENSIONS (For reference only)
OVERTRAVEL PLUNGERS
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
*Fig. 17
*Fig. 19
*Fig. 20
Standard
Basic Switches
Fig. 11
*Fig. 18
* Threaded bushings are 15/32-32ns.
For application help: call 1-800-537-6945.
Honeywell Sensing and Control
59
Basic Switches
Standard
BZ/BA Series
MOUNTING DIMENSIONS (For reference only)
STRAIGHT LEVERS
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
FLEXIBLE LEAF ACTUATOR
Fig. 33
60
Honeywell Sensing and Control
Fig. 34
For application help: call 1-800-537-6945.
Basic Switches
Standard
BZ/BA Series
MOUNTING DIMENSIONS
ROLLER LEVERS
Fig. 28
Fig. 29
Fig. 30
Fig. 31
Fig. 32
FLEXIBLE ROLLER LEAF
Mounting holes accept pins or screws of
.139N (3,53 mm) diameter.
Fig. 35
For application help: call 1-800-537-6945.
Fig. 36
Honeywell Sensing and Control
61
Standard
Basic Switches
Fig. 27
Similar pages