PHILIPS BZA900A Quadruple esd transient voltage suppressor Datasheet

DISCRETE SEMICONDUCTORS
DATA SHEET
M3D743
BZA900A-series
Quadruple ESD transient voltage
suppressor
Product specification
2001 Sep 03
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
FEATURES
BZA900A-series
PINNING
• ESD rating >8 kV, according to IEC61000-4-2
PIN
DESCRIPTION
• SOT665 surface mount package
1
cathode 1
• Common anode configuration.
2
common anode
3
cathode 2
APPLICATIONS
4
cathode 3
• Computers and peripherals
5
cathode 4
• Audio and video equipment
• Communication systems
DESCRIPTION
handbook, halfpage 5
4
Monolithic transient voltage suppressor diode in a five lead
SOT665 package for 4-bit wide ESD transient
suppression.
1
3
2
4
5
MARKING
1
TYPE NUMBER
2
3
MGW315
MARKING CODE
BZA956A
Z1
BZA962A
Z2
BZA968A
Z3
Fig.1 Simplified outline (SOT665) and symbol.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
Per diode
IZ
working current
Tamb = 25 °C
−
note 1
mA
IF
continuous forward current
Tamb = 25 °C
−
200
mA
IFSM
non-repetitive peak forward current tp = 1 ms; square pulse
−
4
A
Ptot
total power dissipation
Tamb = 25 °C; note 2; see Fig.5
−
335
mW
PZSM
non repetitive peak reverse power
dissipation:
square pulse; tp = 1 ms; see Fig.3
BZA956A
−
16
W
BZA962A
−
15
W
BZA968A
−
14
W
Tstg
storage temperature
−65
+150
°C
Tj
junction temperature
−
150
°C
Notes
1. DC working current limited by Ptot(max).
2. Device mounted on standard printed-circuit board.
2001 Sep 03
2
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
BZA900A-series
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
CONDITIONS
VALUE
UNIT
Rth j-a
thermal resistance from junction to ambient
all diodes loaded
370
K/W
Rth j-s
thermal resistance from junction to solder
point; note 1
one diode loaded
135
K/W
all diodes loaded
125
K/W
MAX.
UNIT
Note
1. Solder point of common anode (pin 2).
ELECTRICAL CHARACTERISTICS
Tj = 25 °C unless otherwise specified.
SYMBOL
PARAMETER
VF
forward voltage
IR
reverse current
CONDITIONS
IF = 200 mA
1.3
V
BZA956A
VR = 3 V
1000
nA
BZA962A
VR = 4 V
500
nA
BZA968A
VR = 4.3 V
100
nA
Table 1 Per type; BZ956A to BZA968A
Tj = 25 °C unless otherwise specified.
TYPE
WORKING VOLTAGE
VZ (V)
at IZ = 1 mA
DIFFERENTIAL
TEMP.
DIODE CAP.
COEFF.
Cd (pF)
RESISTANCE
SZ (mV/K) at at f = 1 MHz;
rdif (Ω)
at IZ = 1 mA
IZ = 1 mA
VR = 0
MIN.
TYP.
MAX.
MAX.
TYP.
BZA956A
5.32
5.6
5.88
400
0.3
125
2.2
BZA962A
5.89
6.2
6.51
300
1.6
105
2.1
BZA968A
6.46
6.8
7.14
200
2.2
90
2.0
2001 Sep 03
3
MAX.
NON-REPETITIVE
PEAK REVERSE
CURRENT
IZSM (A) at tp = 1 ms;
Tamb = 25 °C
MAX.
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
BZA900A-series
GRAPHICAL DATA
MGW318
10
MGW319
102
handbook, halfpage
handbook, halfpage
I ZSM
PZSM
(A)
(W)
BZA956A
BZA956A
BZA962A
1
10
BZA968A
BZA962A
BZA968A
10−1
10−2
10−1
1
t p (ms)
1
10−2
10
10−1
1
t p (ms)
10
PZSM = VZSM × IZSM.
VZSM is the non-repetitive peak reverse voltage at IZSM.
Fig.3
Fig.2
Maximum non-repetitive peak reverse
power dissipation as a function of pulse
duration (square pulse).
Maximum non-repetitive peak reverse
current as a function of pulse time.
MGT586
MGW320
120
400
handbook, halfpage
handbook, halfpage
Ptot
(mW)
Cd
(pF)
300
80
200
BZA956A
BZA962A
40
BZA968A
0
0
2
4
6 V (V)
R
100
0
8
0
50
100
Tamb (°C)
Tj = 25 °C; f = 1 MHz.
Fig.4
Diode capacitance as a function of reverse
voltage; typical values.
2001 Sep 03
Fig.5 Power derating curve.
4
150
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
handbook, full pagewidth
ESD TESTER
RZ
450 Ω
RG 223/U
50 Ω coax
CZ
BZA900A-series
10×
ATTENUATOR
DIGITIZING
OSCILLOSCOPE
50 Ω
note 1
1/4 BZA900A
IEC 61000-4-2 network
CZ = 150 pF; RZ = 330 Ω
Note 1: attenuator is only used for open
socket high voltage measurements
vertical scale = 100 V/div
horizontal scale = 50 ns/div
BZA968A
vertical scale = 5 V/div
horizontal scale = 50 ns/div
BZA962A
BZA956A
GND
unclamped +1 kV ESD voltage waveform
(IEC 61000-4-2 network)
clamped +1 kV ESD voltage waveform
(IEC 61000-4-2 network)
GND
GND
vertical scale = 100 V/div
horizontal scale = 50 ns/div
vertical scale = 5 V/div
horizontal scale = 50 ns/div
unclamped −1 kV ESD voltage waveform
(IEC 61000-4-2 network)
clamped −1 kV ESD voltage waveform
(IEC 61000-4-2 network)
Fig.6 ESD clamping test set-up and waveforms.
2001 Sep 03
5
MGW321
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
BZA900A-series
APPLICATION INFORMATION
Typical common anode application
A quadruple transient suppressor in a SOT665 package makes it possible to protect four separate lines using only one
package. A simplified example is shown in Fig.7.
handbook, full pagewidth
keyboard,
terminal,
printer,
etc.
A
B
C
D
I/O
FUNCTIONAL
DECODER
BZA900A
GND
MGW316
Fig.7 Computer interface protection.
Device placement and printed-circuit board layout
Circuit board layout is of extreme importance in the suppression of transients. The clamping voltage of the BZA900A is
determined by the peak transient current and the rate of rise of that current (di/dt). Since parasitic inductances can further
add to the clamping voltage (V = L di/dt) the series conductor lengths on the printed-circuit board should be kept to a
minimum. This includes the lead length of the suppression element.
In addition to minimizing conductor length the following printed-circuit board layout guidelines are recommended:
1. Place the suppression element close to the input terminals or connectors
2. Keep parallel signal paths to a minimum
3. Avoid running protection conductors in parallel with unprotected conductors
4. Minimize all printed-circuit board loop areas including power and ground loops
5. Minimize the length of the transient return path to ground
6. Avoid using shared transient return paths to a common ground point.
2001 Sep 03
6
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
BZA900A-series
PACKAGE OUTLINE
Plastic surface mounted package; 5 leads
SOT665
D
E
A
X
Y S
S
HE
5
4
A
1
2
e1
c
3
bp
w M A
Lp
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
bp
c
D
E
e
e1
HE
Lp
w
y
mm
0.6
0.5
0.27
0.17
0.18
0.08
1.7
1.5
1.3
1.1
1.0
0.5
1.7
1.5
0.3
0.1
0.1
0.1
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
EIAJ
ISSUE DATE
01-01-04
01-08-27
SOT665
2001 Sep 03
EUROPEAN
PROJECTION
7
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
BZA900A-series
DATA SHEET STATUS
DATA SHEET STATUS(1)
PRODUCT
STATUS(2)
DEFINITIONS
Objective data
Development
This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
Preliminary data
Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
Product data
Production
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Changes will be
communicated according to the Customer Product/Process Change
Notification (CPCN) procedure SNW-SQ-650A.
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
DEFINITIONS
DISCLAIMERS
Short-form specification  The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Life support applications  These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition  Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes  Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
the use of any of these products, conveys no licence or title
under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
Application information  Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
2001 Sep 03
8
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
NOTES
2001 Sep 03
9
BZA900A-series
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
NOTES
2001 Sep 03
10
BZA900A-series
Philips Semiconductors
Product specification
Quadruple ESD transient voltage suppressor
NOTES
2001 Sep 03
11
BZA900A-series
Philips Semiconductors – a worldwide company
Contact information
For additional information please visit http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to: [email protected].
© Koninklijke Philips Electronics N.V. 2001
SCA73
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
613514/1000/01/pp12
Date of release: 2001
Sep 03
Document order number:
9397 750 08542
Similar pages