Source C-13-15-F02-BD-NLCM 1310nm emitting ,1550nm receiving (pin-tia, 3.3v), bi-directional diplexer optical module Datasheet

1310nm Emitting,1550nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/15-F02-BD-NLCM
Features
• Single fiber bi-directional operation
• Laser diode with multi-quantum- well structure
• Low threshold current
• InGaAs/InP PIN Photodiode with trans-impedance amplifier
• High sensitivity with AGC*
• Differential ended output
• Single +3.3V Power Supply
• Integrated WDM coupler
• Un-cooled operation from -40ºC to +85ºC
• Hermetically sealed active component
• LC BOSA
• Design for fiber optic networks application
Absolute Maximum Rating (Tc=25ºC)
Parameter
Fiber Output Power
Symbol
Value
Unit
Pf
1.5(M)
mW
V
M
LD Reverse Voltage
VRLD
2
PIN-TIA Voltage
VCC
4.5
V
Operating Temperature
Topr
-40 to +85
ºC
Storage Temperature
Tstg
-40 to +85
ºC
(All optical data refer to a coupled 62.5/125µm Multimode fiber)
Optical and Electrical Characteristics( Tc=25ºC)
Parameter
Laser Diode
Symbol
Min
Typical
Max
Unit
Test Condition
Optical Output Power
M
0.5
0.75
1
mW
CW, Ith+ 20mA , kink free
Peak Wavelength
λ
1290
1310
1330
nm
CW, Pf=Pf(Min)
Spectrum Width (RMS)
∆λ
-
2
5
nm
CW, Pf=Pf(Min)
Threshold Current
Ith
-
10
15
mA
CW
Forward Voltage
VF
-
1.2
1.5
V
CW, Pf=Pf(Min)
tr/ tf
-
-
0.5
ns
Ibias=Ith ,10% to 90%
Im
100
-
-
µA
CW, Pf=Pf(Min),VRPD=2V
Dark Current
IDARK
-
-
0.1
µA
VRPD=5V
Capacitance
Ct
-
6
15
pF
VRPD=5V, f=1MHz
∆Pf/Pf
-1.5
-
1.5
dB
APC, -40 to +85ºC
Rise/Fall Time
Monitor Diode
Monitor Current
Module
Tracking Error
Optical Crosstalk
CRT
< -40
dB
Note:
1.Pin assignment can be customized.
2.Specifications subject to change without notice.
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
1
LUMNDS839-SEP2705
rev. A.1
1310nm Emitting,1550nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/15-F02-BD-NLCM
Detector λ=1480-1600nm
DC Electrical Characteristics( Tc=25ºC)
Parameter
Symbol
Min
Typical
Max
Unit
Test Condition
Power Supply
Vcc
3.0
3.3
3.6
V
Differential Output Voltage
Vd
-
-
1
V
Supply Current (no load)
F02
-
-
35
mA
Min
Typical
Max
Unit
Test Condition
1480
1550
1600
nm
-
G
52
-
70
V/mW
Measure differentially,
AC coupled, RL=50Ω
Bandwidth
BW
120
140
-
MHz
Saturation Power
Psat
-3
0
-
dBm
BER<10-10 @155Mbps
PRBS 223-1,Er=10dB
Sensitivity
Sens.
-
-37
-35
dBm
BER<10-10 @155Mbps
PRBS 223-1,Er=10dB
Output Resistance
Rout
-
50
-
ohm
AC/Optical and Electrical Characteristics( Tc=25ºC)
Parameter
Symbol
Detection Range
Gain @ 10 Mbps Differential
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
2
LUMNDS839-SEP2705
rev. A.1
1310nm Emitting,1550nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/15-F02-BD-NLCM
Pin Assignment
CASE
LD
PD
Outline Demensions
LUMINENTOIC.COM
Units in mm.
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
3
LUMNDS839-SEP2705
rev. A.1
1310nm Emitting ,1550nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/15-F02-BD-NLCM
Ordering Information
C-13/15-F02-BD-NLCM
1310nm Transmitter
1550nm Receiver
Package
B=BOSA
02: 155 Mb/s PIN-TIA+3.3V
Fiber Application
N=62.5/125µm
Pin Assignment
D =D Type
Fiber Output Power
M
Connector
LC
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended.
Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants
performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated
as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express,
implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to
the company’s Terms and Conditions of Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or
intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and
LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights.
Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury
or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and
indemnify LuminentOIC for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© LuminentOIC, Inc. 2005
All rights reserved
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4
LUMNDS839-SEP2705
rev. A.1
Similar pages