Kemet C0805C106K8PAC Surface mount ceramic chip capacitors x5r dielectric Datasheet

New Product Bulletin
Surface Mount Ceramic Chip Capacitors
X5R Dielectric
KEMET is pleased to continue the expansion of high capacitance ratings in our X5R ceramic
chip capacitors to include the following values in our base metal electrode devices.
0603/X5R - 1.2µF (125) – 2.2µF (225) @ 10 Volts
0805/X5R - 5.6µF (565) – 10.0µF (106) @ 10 Volts
1206/X5R - 12.0µF (126) – 22.0 (226) @ 10 Volts
Outline Drawing
Table 1
Dimensions - Millimeters (Inches)
EIA Size
Code
Metric Size
Code
L
Length
W
Width
B
Bandwidth
S - Min.
Separation
Mounting
Technique
0603
1608
1.6 (.063) ±
0.15 (.006)
0.8 (.032) ±
0.15 (.006)
0.35 (.014) ±
0.15 (.006)
0.7 (.028)
Solder Wave
or Reflow
0805
2012
2.0 (.079) ±
0.2 (.008)
1.25 (.049) ±
0.2 (.008)
0.5 (.02) ±
.25 (.010)
0.75 (.030)
Solder Wave
or Reflow
1206
3216
3.2 (.126) ±
0.2 (.008)
1.6 (.063) ±
0.2 (.008)
0.5 (.02) ±
.25 (.010)
N/A
Solder Wave
or Reflow
See Table 2 for thickness dimension.
F-9034 06/05
Table 2 - X5R - Capacitance Value Extensions
Capacitance
Values (µF)
KEMET Part
Number
Voltage
Capacitance
Tolerance
1.2
1.5
1.8
2.2
C0603C125(1)8PAC
C0603C155(1)8PAC
C0603C185(1)8PAC
C0603C225(1)8PAC
10
10
10
10
K,M
K,M
K,M
K,M
0.8
0.8
0.8
0.8
±
±
±
±
5.6
6.8
8.2
10.0
C0805C565(1)8PAC
C0805C685(1)8PAC
C0805C825(1)8PAC
C0805C106(1)8PAC
10
10
10
10
K,M
K,M
K,M
K,M
1.25
1.25
1.25
1.25
±
±
±
±
12.0
15.0
18.0
22.0
C1206C126(1)8PAC
C1206C156(1)8PAC
C1206C186(1)8PAC
C1206C226(1)8PAC
10
10
10
10
K,M
K,M
K,M
K,M
Thickness
mm
1.60
1.60
1.60
1.60
±
±
±
±
Qty
7” Reel
Qty
13” Reel
0.1
0.1
0.1
0.1
4,000
4,000
4,000
4,000
10,000
10,000
10,000
10,000
0.15
0.15
0.15
0.15
2,500
2,500
2,500
3,000
10,000
10,000
10,000
10,000
2,000
2,000
2,000
2,000
8,000
8,000
8,000
8,000
0.15
0.15
0.15
0.15
(1) To complete KEMET part number, insert the alpha code for the tolerance desired. K = ±10%; M = ±20%
Electrical Parameters
As detailed in the KEMET Surface Mount Catalog F3102 for X5R, with following specific
requirements based on room temperature (25°C) parameters:
• Operating Range: -55°C to +85°C, with no-bias capacitance shift limited to ± 15% over that range
• Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 500
megohm microfarads.
• Capacitance and Dissipation Factor (DF) measured at the following conditions. DF Limit is 10%.
1 kHz and 1 Vrms if capacitance ≤ 10 µF
120 Hz and 0.5 Vrms if capacitance > 10 µF
Soldering Process
These components are suitable for wave or reflow soldering. All parts incorporate the standard
KEMET barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability
as well as resistance to leaching.
Marking
These chips are normally supplied unmarked. If required, they can be laser marked as an extra
cost option. More detail on the marking format is included in our Surface Mount Catalog F3102.
In general, the information in the KEMET Surface Mount catalog F3102 applies to these
capacitors. The information in this bulletin supplements that in the catalog.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6300 • www.kemet.com
Similar pages