Murata C09E Emi suppression filters for ac power line Datasheet

!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EMI Suppression Filters
(EMIFILr)
for AC Power Lines
Murata
Manufacturing Co., Ltd.
Cat.No.C09E-11
C09E.pdf
06.2.9
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CONTENTS
1
EMIFILr in this catalog is the trademark of Murata Manufacturing Co., Ltd.
Part Numbering
2
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines
3
1
2
Common Mode Choke Coil
5
FKOB Series
5
PLA10 Series Standard Winding Type
6
PLA10 Series Sectional Winding Type
6
PLA10 Series (Safety Standard Recognized) Standard Winding Type
8
PLA10 Series (Safety Standard Recognized) Sectional Winding Type
8
PLH10 Series
10
PLH10 Series (Safety Standard Recognized)
11
Hybrid Choke Coil
12
PLY10 Series Standard Winding Type
12
PLY10 Series Sectional Winding Type
12
PLY10 Series (Safety Standard Recognized) Standard Winding Type
14
PLY10 Series (Safety Standard Recognized) Sectional Winding Type
14
PLY17 Series A Type
16
PLY17 Series B Type
16
PLY17 Series (Safety Standard Recognized) A Type
18
PLY17 Series (Safety Standard Recognized) B Type
18
Noise Suppression Effect of PLY10 Series
20
!Caution /Notice
21
Packaging
22
Recycled Paper
2
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
AC Line Filters
(Part Number)
PL
A
q
w e r t
10
A
S
152
2R0
y
u
R
2
B
i o !0
yInductance
qProduct ID
Product ID
PL
Common Mode Choke Coils
Code
Type
wType
A
AC Standard Type
H
AC High-frequency Type
Y
AC Hybrid Choke Coils Type
eApplications
Expressed by three figures. The unit is micro-henry (µH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits. If inductance is less
than 0.1 µH, the inductance code is expressed by a combination
of two figures and capital letter "N", and the unit of inductance is
nano-henry (nH). The capital letter "N" indicates the unit of "nH",
and also expresses a decimal point. In this case, all figures are
significant digits.
uRated Current
Code
Applications
10
for AC Line
17
Expressed by three figures. The unit is in amperes (A). A decimal
point is expressed by the capital letter "R". In this case, all figures
are significant digits.
iWinding Mode
rStructure
Code
Winding Mode
Code
Structure
A
Parallel Winding Type
A
Core Vertical Type
B
Parallel Winding Type (High Performance Type)
B
Core Horizontal Type
D
Sectional Winding Type
tFeatures
Code
Features
S
Safety Recognized
N
General Use
R
Standard Type
P
Single Layer Winding Type
oLead Dimensions
Code
Lead Dimensions
2
3.5mm
!0Packaging
Code
Packaging
B
Bulk
M
Magazine Package
• Please contact us for FKOB series.
2
Series
All series
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines
performance of total filter block MURATA provides two types
of common mode chokes. (Standard type, High frequency
type)
Hybrid choke coil is high performance EMI suppression
device which can suppress both common mode noise and
differential mode noise at the same time. It is effective in AC
power supplies with active device for higher harmonic
countermeasure, which tend to emit relatively higher
differential mode noise.
EMI (Electro Magnetic Interference) suppression filter for AC
power lines eliminate noise entering equipment from
commercial power lines or noise generated from electronic
equipment.
Common mode chokes, line bypass capacitors, across the
line capacitors are generally used as AC EMI suppression
filter device. In suppressing common mode noise, common
mode chokes are most important devices. Because the
characteristics of common mode chokes influences
■ Classification of EMI Suppression Filter for AC Power Lines
Effective Frequency Range (Hz)
Appearance
Product Name
10k
Common Mode Choke Coil
100k
1M
10M
100M
Application
1G
Standard Type
Suppression of general
common mode noise
FKOB
PLA10
High Frequency Type
Suppression of common mode
noise contains high frequency
noise above 10MHz
PLH10
Hybrid Choke Coil
Suppression of conduction
noise in AC power line with
active device for higher
harmonic countermeasure.
Suppression of AC power line
noise which contains both
PLY10
common mode noise and
differential mode noise.
Hybrid Choke Coil
For AC power supply,
AC adaptor.
Set for low profile equipment.
PLY17
3
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines
■ Common Mode Choke Coil Standard Winding and Sectional Winding
Standard Winding
End of Winding
36
19
18
1
35
20
17
2
34
21
16
3
33
22
15
4
32
23
14
5
31
24
13
6
30
25
12
7
29
26
11
8
28
27
10
9
Beginning of Winding
High-frequency noise can pass through the
Filter easily because both edges of coils are
close as shown above
Standard Winding
Large inductance is available
→Highly Efficient in Low Frequency
Sectional Winding
Excellent performance in high frequency
Stray capacity between windings is low
0
Sectional Winding
15
10
7
2
End of Winding
14
11
6
3
13
12
5
4
32
25
24
17
31
26
23
18
30
27
22
19
29
28
21
20
Beginning of Winding
High-frequency noise can hardly pass
through the Filter because both edges
of coil are not close as shown above
Insertion Loss (dB)
16
9
8
1
20
(Standard Winding)
40
(Sectional Winding)
60
80
0.01
0.1
1
Frequency (MHz)
10
100
■ Noise Measures for Switching Power Supply
Common Mode Choke Coil
suppresses Common
Mode Noise
Noise are generated from
Common Mode Noise
Switching Power Supply
Differential Mode Noise
Line Bypass Capacitor
(Y Capacitor) suppresses
Common Mode Noise
Differential Mode Choke Coil
suppresses Differential Mode Noise
Switching
Power Supply
PLA10/PLH10
Across the Line Capacitor
(X Capacitor) suppresses
Differential Mode Noise
4
Differential Mode Choke Coil
suppresses Differential Mode
Noise
Across the Line Capacitor
(X Capacitor) suppresses
Differential Mode Noise
Load
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EMI Suppression Filters (EMIFILr) for AC Power Lines
1
Common Mode Choke Coil
8±0.5
3
The FKOB series is compact size AC common mode choke
coil which uses troidal type ferrite core.
Its broad band frequency characteristic enables simple
filter composition in relative low noise equipments.
4
FKOB Series
1
2
ø23 max.
10±2
17 max.
10±0.5
(in mm)
13±0.5
3
4
FKOB160MH02/25/23/26/24
1
2
ø23 max.
4.5±1
17 max.
10±0.5
FKOB160MH06/13/14/16/15
(in mm)
Common Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(min.)
(M ohm)
FKOB160MH02
250
2.5
250
100
FKOB160MH06
250
2.5
250
100
FKOB160MH13
600
2.5
250
100
FKOB160MH25
600
2.5
250
100
FKOB160MH14
800
2.5
250
100
FKOB160MH23
800
2.5
250
100
FKOB160MH16
1000
1.5
250
100
FKOB160MH26
1000
1.5
250
100
FKOB160MH15
1500
1.5
250
100
FKOB160MH24
1500
1.5
250
100
Part Number
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -20°C to 95°C
■ Equivalent Circuit Diagram
Winding Temperature Rise (at Rated Current) (max.): 35K
■ Insertion Loss-Frequency Characteristics
0
10
N1
(2)
N1 : N2 = 1 : 1
(4)
N2
Insertion Loss (dB)
02, 06
(1)
20
13, 14, 23, 25
30
16, 26
40
15, 24
50
(3)
60
70
0.1
0.5
1
5
10
50 100
Frequency (MHz)
5
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
PLA10 Series
16 max.
18 max.
17.5 max.
The PLA10 series is a compact size AC common mode
choke coil. It can obtain a high inductance value in
spite of its compact size.
1. Compact and light weight
2. Low profile in vertical core layout
3. Both a standard winding type and a sectional
winding type for higher frequency noise are
available.
3.5±1
■ Features
13±0.5
Standard Winding Type
ø0.9 max.
10±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
16 max.
3.5±1
17.5 max.
18 max.
13±0.5
Sectional Winding Type
ø0.9 max.
10±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
o Standard Winding Type
Common Mode Inductance
(min.)
(mH)
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(min.)
(M ohm)
PLA10AN1522R0R2
1.5
2.0
300
100
PLA10AN1821R7R2
1.8
1.7
300
100
PLA10AN2221R5R2
2.2
1.5
300
100
PLA10AN3021R3R2
3.0
1.3
300
100
PLA10AN3521R2R2
3.5
1.2
300
100
PLA10AN5521R0R2
5.5
1.0
300
100
PLA10AN7420R8R2
7.4
0.8
300
100
PLA10AN1030R7R2
10.0
0.7
300
100
PLA10AN1230R6R2
12.0
0.6
300
100
PLA10AN2030R5R2
20.0
0.5
300
100
PLA10AN3030R4R2
30.0
0.4
300
100
PLA10AN4330R3R2
43.0
0.3
300
100
Part Number
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o Sectional Winding Type
Common Mode Inductance
(min.)
(mH)
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(min.)
(M ohm)
PLA10AN9012R0D2
0.9
2.0
300
100
PLA10AN1321R7D2
1.3
1.7
300
100
PLA10AN1821R5D2
1.8
1.5
300
100
PLA10AN2021R3D2
2.0
1.3
300
100
PLA10AN3621R0D2
3.6
1.0
300
100
PLA10AN7720R7D2
7.7
0.7
300
100
PLA10AN1330R5D2
13.0
0.5
300
100
PLA10AN2230R4D2
22.0
0.4
300
100
PLA10AN3630R3D2
36.0
0.3
300
100
Part Number
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C
6
Winding Temperature Rise (at Rated Current) (max.): 60K
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit Diagram
(1)
1
(2)
N1
N1 : N2 = 1 : 1
N2
(4)
(3)
■ Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
PLA10AN1522R0R2
PLA10AN1821R7R2
PLA10AN2221R5R2
PLA10AN3021R3R2
PLA10AN3521R2R2
PLA10AN5521R0R2
40
PLA10AN7420R8R2
PLA10AN1030R7R2
PLA10AN1230R6R2
PLA10AN2030R5R2
PLA10AN3030R4R2
PLA10AN4330R3R2
60
80
0.01
0.1
1
Frequency (MHz)
PLA10AN9012R0D2
PLA10AN1321R7D2
PLA10AN1821R5D2
PLA10AN2021R3D2
20
Insertion Loss (dB)
Insertion Loss (dB)
20
10
40
PLA10AN3621R0D2
PLA10AN7720R7D2
PLA10AN1330R5D2
PLA10AN2230R4D2
PLA10AN3630R3D2
60
100
80
0.01
0.1
1
10
100
Frequency (MHz)
7
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
PLA10 Series (Safety Standard Recognized)
16 max.
18 max.
■ Features
3.5±1
17.5 max.
1. Compact and light weight
2. Low profile in vertical core layout
3. Both a standard winding type and a sectional
winding type for higher frequency noise are
available.
4. Safety standards: EN60065
13±0.5
■ Applications
Standard Winding Type
Noise suppression of AC power lines
ø0.9 max.
10±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
16 max.
3.5±1
17.5 max.
18 max.
13±0.5
Sectional Winding Type
ø0.9 max.
10±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
o Standard Winding Type
Common Mode Inductance
(min.)
(mH)
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(min.)
(M ohm)
PLA10AS1522R0R2
1.5
2.0
250
100
PLA10AS1821R7R2
1.8
1.7
250
100
PLA10AS2221R5R2
2.2
1.5
250
100
PLA10AS3021R3R2
3.0
1.3
250
100
PLA10AS3521R2R2
3.5
1.2
250
100
PLA10AS5521R0R2
5.5
1.0
250
100
PLA10AS7420R8R2
7.4
0.8
250
100
PLA10AS1030R7R2
10.0
0.7
250
100
PLA10AS1230R6R2
12.0
0.6
250
100
PLA10AS2030R5R2
20.0
0.5
250
100
PLA10AS3030R4R2
30.0
0.4
250
100
PLA10AS4330R3R2
43.0
0.3
250
100
Part Number
Operating Temperature Range : -25°C to 60°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o Sectional Winding Type
Common Mode Inductance
(min.)
(mH)
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(min.)
(M ohm)
PLA10AS9012R0D2
0.9
2.0
250
100
PLA10AS1321R7D2
1.3
1.7
250
100
PLA10AS1821R5D2
1.8
1.5
250
100
PLA10AS2021R3D2
2.0
1.3
250
100
PLA10AS3621R0D2
3.6
1.0
250
100
PLA10AS7720R7D2
7.7
0.7
250
100
PLA10AS1330R5D2
13.0
0.5
250
100
PLA10AS2230R4D2
22.0
0.4
250
100
PLA10AS3630R3D2
36.0
0.3
250
100
Part Number
Operating Temperature Range : -25°C to 60°C
8
Winding Temperature Rise (at Rated Current) (max.): 60K
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit Diagram
(1)
1
(2)
N1
N1 : N2 = 1 : 1
N2
(4)
(3)
■ Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
PLA10AS1522R0R2
PLA10AS1821R7R2
PLA10AS2221R5R2
PLA10AS3021R3R2
PLA10AS3521R2R2
PLA10AS5521R0R2
20
Insertion Loss (dB)
Insertion Loss (dB)
20
40
PLA10AS7420R8R2
PLA10AS1030R7R2
PLA10AS1230R6R2
PLA10AS2030R5R2
PLA10AS3030R4R2
PLA10AS4330R3R2
60
80
0.01
0.1
1
Frequency (MHz)
PLA10AS9012R0D2
PLA10AS1321R7D2
PLA10AS1821R5D2
PLA10AS2021R3D2
PLA10AS3621R0D2
PLA10AS7720R7D2
10
40
60
PLA10AS1330R5D2
PLA10AS2230R4D2
PLA10AS3630R3D2
100
80
0.01
0.1
1
10
100
Frequency (MHz)
9
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
PLH10 Series
16 max.
18 max.
17.5 max.
The PLH10 series is a common mode choke coil for high
frequency use. The same dimensions as the PLA10 series
enables flexible design.
■ Features
1. High performance in high frequency range
2. Low profile in vertical core layout
3. Compact and light weight
3.5±1
ø0.9 max.
13±0.5
10±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
Common Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(min.)
(M ohm)
PLH10AN7003R6P2
70
3.6
300
100
PLH10AN1112R6P2
110
2.6
300
100
PLH10AN1612R1P2
160
2.1
300
100
PLH10AN2211R5P2
220
1.5
300
100
PLH10AN2911R2P2
290
1.2
300
100
PLH10AN3711R0P2
370
1.0
300
100
Part Number
Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C
■ Equivalent Circuit Diagram
Winding Temperature Rise (at Rated Current) (max.): 60K
■ Insertion Loss-Frequency Characteristics
0
PLH10AN7003R6P2
PLH10AN1112R6P2
PLH10AN1612R1P2
10
(1)
N1
(2)
N1 : N2 = 1 : 1
(4)
N2
Insertion Loss (dB)
1
20
30
PLH10AN2211R5P2
PLH10AN2911R2P2
PLH10AN3711R0P2
(3)
40
50
0.1
1.0
10
Frequency (MHz)
10
100
1000
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
PLH10 Series (Safety Standard Recognized)
16 max.
18 max.
■ Features
17.5 max.
1. High performance in high frequency range
2. Low profile in vertical core layout
3. Compact and light weight
4. Safety standards: EN60065
■ Applications
3.5±1
ø0.9 max.
Suppressing radiation noise in switching power
supply and inverter (AC-AC converter)
13±0.5
10±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
Common Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(V)
Insulation Resistance
(min.)
(M ohm)
PLH10AS7003R6P2
70
3.6
250
100
PLH10AS1112R6P2
110
2.6
250
100
PLH10AS1612R1P2
160
2.1
250
100
PLH10AS2211R5P2
220
1.5
250
100
PLH10AS2911R2P2
290
1.2
250
100
PLH10AS3711R0P2
370
1.0
250
100
Part Number
Operating Temperature Range : -25°C to 60°C
Winding Temperature Rise (at Rated Current) (max.): 60K
■ Equivalent Circuit Diagram
■ Insertion Loss-Frequency Characteristics
0
PLH10AS7003R6P2
PLH10AS1112R6P2
PLH10AS1612R1P2
(1)
N1
(2)
N1 : N2 = 1 : 1
(4)
N2
Insertion Loss (dB)
10
20
30
PLH10AS2211R5P2
PLH10AS2911R2P2
PLH10AS3711R0P2
(3)
40
50
0.1
1.0
10
100
1000
Frequency (MHz)
11
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EMI Suppression Filters (EMIFILr) for AC Power Lines
Hybrid Choke Coil
PLY10 Series
The PLY10 is a compact and high performance hybrid
choke coil which can handle differential mode noise
caused by the harmonics currents regulation circuit as
well as common mode noise. It can handle noise
problems much more compactly than a combination of a
conventional common mode choke coil and a differential
mode choke coil.
16 max.
3.5±1
17.5 max.
18 max.
13±0.5
■ Features
Standard Winding Type
1. PLY10 has both functions of a common mode choke
coil and a differential mode choke coil in its
compact body.
2. Low profile in vertical core layout
3. PLY10 has the same pin layout as a general type
common mode choke coil which enables it to replace
conventional components.
4. Both a standard winding type and a sectional winding
type for higher frequency noise are available.
10±0.5
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
16 max.
17.5 max.
18 max.
■ EMI Problem for harmonics currents regulation
There are some methods meet harmonics currents
regulations (IEC1000-3, EN60555-2) such as an active
filter type and one converter type. However, they
cause new EMI problems of differential mode noise
because they use active components. For that reason,
additional filter components to meet differential mode
noise must be applied.
ø0.9 max.
(1)
3.5±1
2
13±0.5
Sectional Winding Type
ø0.9 max.
10±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
o Standard Winding Type
Common Mode Inductance
(min.)
(mH)
Normal Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(Vac)
PLY10AN9012R0R2
0.9
65
2.0
300
PLY10AN1121R8R2
1.1
90
1.8
300
PLY10AN1521R6R2
1.5
110
1.6
300
PLY10AN2121R4R2
2.1
150
1.4
300
PLY10AN2821R2R2
2.8
190
1.2
300
PLY10AN4321R0R2
4.3
300
1.0
300
PLY10AN6220R8R2
6.2
400
0.8
300
PLY10AN8720R7R2
8.7
530
0.7
300
Part Number
PLY10AN9920R6R2
9.9
690
0.6
300
PLY10AN1430R5R2
14.0
1000
0.5
300
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o Sectional Winding Type
Common Mode Inductance
(min.)
(mH)
Normal Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(Vac)
PLY10AN7012R0D2
0.7
50
2.0
300
PLY10AN1121R7D2
1.1
65
1.7
300
PLY10AN1421R4D2
1.4
110
1.4
300
Part Number
Continued on the following page.
12
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Common Mode Inductance
(min.)
(mH)
Normal Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(Vac)
PLY10AN2321R2D2
2.3
160
1.2
300
PLY10AN3521R0D2
3.5
240
1.0
300
PLY10AN4420R8D2
4.4
320
0.8
300
PLY10AN8720R7D2
8.7
500
0.7
300
PLY10AN9720R6D2
9.7
670
0.6
300
PLY10AN1130R5D2
11.0
840
0.5
300
PLY10AN2430R4D2
24.0
1800
0.4
300
Part Number
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
2
Winding Temperature Rise (at Rated Current) (max.): 60K
■ Equivalent Circuit Diagram
Differential Mode Inductor
(1)
(2)
(4)
(3)
Common Mode Inductor
■ Common Mode Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
PLY10AN9012R0R2
PLY10AN1121R8R2
PLY10AN1521R6R2
PLY10AN2121R4R2
20
Insertion Loss (dB)
Insertion Loss (dB)
20
40
PLY10AN2821R2R2
PLY10AN4321R0R2
PLY10AN6220R8R2
PLY10AN8720R7R2
PLY10AN9920R6R2
PLY10AN1430R5R2
60
80
0.01
0.1
1
PLY10AN7012R0D2
PLY10AN1121R7D2
PLY10AN1421R4D2
PLY10AN2321R2D2
PLY10AN3521R0D2
10
40
60
PLY10AN4420R8D2
PLY10AN8720R7D2
PLY10AN9720R6D2
PLY10AN1130R5D2
PLY10AN2430R4D2
80
0.01
100
0.1
Frequency (MHz)
1
10
100
Frequency (MHz)
■ Differential Mode Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
PLY10AN7012R0D2
PLY10AN1121R7D2
PLY10AN1421R4D2
PLY10AN2321R2D2
PLY10AN9012R0R2
PLY10AN1121R8R2
PLY10AN1521R6R2
20
Insertion Loss (dB)
Insertion Loss (dB)
20
40
60
80
0.01
PLY10AN2121R4R2
PLY10AN2821R2R2
PLY10AN4321R0R2
PLY10AN6220R8R2
PLY10AN8720R7R2
PLY10AN9920R6R2
PLY10AN1430R5R2
0.1
40
60
1
Frequency (MHz)
10
100
80
0.01
PLY10AN3521R0D2
PLY10AN4420R8D2
PLY10AN8720R7D2
PLY10AN9720R6D2
PLY10AN1130R5D2
PLY10AN2430R4D2
0.1
1
10
100
Frequency (MHz)
13
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
PLY10 Series (Safey Standard Recognized)
16 max.
3.5±1
17.5 max.
18 max.
13±0.5
■ Features
Standard Winding Type
1. PLY10 has both functions of a common mode choke
coil and a differential mode choke coil in its
compact body.
2. Low profile in vertical core layout
3. PLY10 has the same pin layout as a general type
common mode choke coil which enables it to replace
conventional components.
4. Safety standards: EN60065
ø0.9 max.
10±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
16 max.
17.5 max.
18 max.
■ EMI Problem for harmonics currents regulation
There are some methods meet harmonics currents
regulations (IEC1000-3, EN60555-2) such as an active
filter type and one converter type. However, they
cause new EMI problems of differential mode noise
because they use active components. For that reason,
additional filter components to meet differential mode
noise must be applied.
3.5±1
2
The PLY10 is a compact and high performance hybrid
choke coil which can handle differential mode noise
caused by the harmonics currents regulation circuit as
well as common mode noise. It can handle noise
problems much more compactly than a combination of a
conventional common mode choke coil and a differential
mode choke coil.
13±0.5
Sectional Winding Type
ø0.9 max.
10±0.5
(1)
(4)
(4)
(3)
[(2)]
[(3)]
[(1)]
[(2)]
(in mm)
o Standard Winding Type
Common Mode Inductance
(min.)
(mH)
Normal Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(Vac)
PLY10AS9012R0R2
0.9
65
2.0
300
PLY10AS1121R8R2
1.1
90
1.8
300
PLY10AS1521R6R2
1.5
110
1.6
300
PLY10AS2121R4R2
2.1
150
1.4
300
PLY10AS2821R2R2
2.8
190
1.2
300
PLY10AS4321R0R2
4.3
300
1.0
300
PLY10AS6220R8R2
6.2
400
0.8
300
PLY10AS8720R7R2
8.7
530
0.7
300
PLY10AS9920R6R2
9.9
690
0.6
300
PLY10AS1430R5R2
14.0
1000
0.5
300
Part Number
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o Sectional Winding Type
Common Mode Inductance
(min.)
(mH)
Normal Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(Vac)
PLY10AS7012R0D2
0.7
50
2.0
300
PLY10AS1121R7D2
1.1
65
1.7
300
PLY10AS1421R4D2
1.4
110
1.4
300
PLY10AS2321R2D2
2.3
160
1.2
300
PLY10AS3521R0D2
3.5
240
1.0
300
PLY10AS4420R8D2
4.4
320
0.8
300
PLY10AS8720R7D2
8.7
500
0.7
300
PLY10AS9720R6D2
9.7
670
0.6
300
PLY10AS1130R5D2
11.0
840
0.5
300
PLY10AS2430R4D2
24.0
1800
0.4
300
Part Number
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
14
Winding Temperature Rise (at Rated Current) (max.): 60K
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit Diagram
Differential Mode Inductor
(1)
(2)
2
(4)
(3)
Common Mode Inductor
■ Common Mode Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
PLY10AS9012R0R2
PLY10AS1121R8R2
PLY10AS1521R6R2
PLY10AS2121R4R2
20
Insertion Loss (dB)
Insertion Loss (dB)
20
40
PLY10AS2821R2R2
PLY10AS4321R0R2
PLY10AS6220R8R2
PLY10AS8720R7R2
PLY10AS9920R6R2
PLY10AS1430R5R2
60
80
0.01
0.1
1
PLY10AS7012R0D2
PLY10AS1121R7D2
PLY10AS1421R4D2
PLY10AS2321R2D2
PLY10AS3521R0D2
PLY10AS4420R8D2
10
40
60 PLY10AS8720R7D2
PLY10AS9720R6D2
PLY10AS1130R5D2
PLY10AS2430R4D2
80
0.01
0.1
100
Frequency (MHz)
1
10
100
Frequency (MHz)
■ Differential Mode Insertion Loss-Frequency Characteristics
Standard Winding Type
Sectional Winding Type
0
0
PLY10AS9012R0R2
PLY10AS1121R8R2
PLY10AS1521R6R2
PLY10AS7012R0D2
PLY10AS1121R7D2
PLY10AS1421R4D2
20
Insertion Loss (dB)
Insertion Loss (dB)
20
40
60
80
0.01
PLY10AS2121R4R2
PLY10AS2821R2R2
PLY10AS4321R0R2
PLY10AS6220R8R2
PLY10AS8720R7R2
PLY10AS9920R6R2
PLY10AS1430R5R2
0.1
40
60
1
Frequency (MHz)
10
100
80
0.01
PLY10AS2321R2D2
PLY10AS3521R0D2
PLY10AS4420R8D2
PLY10AS8720R7D2
PLY10AS9720R6D2
PLY10AS1130R5D2
PLY10AS2430R4D2
0.1
1
10
100
Frequency (MHz)
15
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
PLY17 Series
22.5±0.5
15.0±0.5
12.5±0.5
(4)
[(1)]
24.5±0.5
1. Integration of choke coil function to suppress
differential mode/Low and High Frequency common
mode noise.
2. Low Profile (H=<13mm)
■ Applications
1. For AC power supply, AC adapter
2. Low profile equipment such as lighting equipment,
FPD, Digital Amplifier
ø1.0 max.
A/B Type
(1) 12.5±0.5 (4)
[(2)]
[(3)]
3.5±0.5
2
(3)
[(2)]
■ Features
(in mm)
o A Type
Common Mode Inductance
(min.)
(mH)
Normal Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(Vac)
PLY17BN4912R4A2
0.49
18
2.4
300
PLY17BN9612R0A2
0.96
36
2.0
300
PLY17BN1023R0A2
1.0
36
3.0
300
PLY17BN1121R8A2
1.1
44
1.8
300
PLY17BN1721R5A2
1.7
67
1.5
300
PLY17BN2921R2A2
2.9
110
1.2
300
PLY17BN3721R0A2
3.7
140
1.0
300
PLY17BN5620R8A2
5.6
210
0.8
300
PLY17BN7820R7A2
7.8
290
0.7
300
PLY17BN9320R6A2
9.3
350
0.6
300
Part Number
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o B Type
Common Mode Inductance
(min.)
(mH)
Normal Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(Vac)
PLY17BN4912R4B2
0.49
24
2.4
300
PLY17BN9612R0B2
0.96
47
2.0
300
PLY17BN1023R0B2
1.0
47
3.0
300
PLY17BN1121R8B2
1.1
58
1.8
300
PLY17BN1721R5B2
1.7
88
1.5
300
PLY17BN2921R2B2
2.9
140
1.2
300
PLY17BN3721R0B2
3.7
180
1.0
300
PLY17BN5620R8B2
5.6
280
0.8
300
PLY17BN7820R7B2
7.8
390
0.7
300
PLY17BN9320R6B2
9.3
460
0.6
300
Part Number
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
16
Winding Temperature Rise (at Rated Current) (max.): 60K
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit Diagram
■ Common Mode Insertion Loss-Frequency Characteristics
0
PLY17BN9612R0-2
PLY17BN4912R4-2
PLY17BN1023R0-2
(1)
Insertion Loss (dB)
20
(2)
(4)
(3)
2
40
PLY17BN9320R6-2
PLY17BN7820R7-2
PLY17BN5620R8-2
PLY17BN3721R0-2
60
PLY17BN2921R2-2
PLY17BN1721R5-2
PLY17BN1121R8-2
80
0.01
0.1
1
10
100
10
100
Frequency (MHz)
■ Differential Mode Insertion Loss-Frequency Characteristics
PLY17BN***B2
0
20
20
40
60
80
0.01
Insertion Loss (dB)
Insertion Loss (dB)
PLY17BN***A2
0
PLY17BN9320R6A2
PLY17BN7820R7A2
PLY17BN5620R8A2
PLY17BN3721R0A2
PLY17BN2921R2A2
PLY17BN1721R5A2
PLY17BN1121R8A2
PLY17BN9612R0A2
PLY17BN4912R4A2
PLY17BN1023R0A2
0.1
40
60
1
Frequency (MHz)
10
100
80
0.01
PLY17BN9320R6B2
PLY17BN7820R7B2
PLY17BN5620R8B2
PLY17BN3721R0B2
PLY17BN2921R2B2
PLY17BN1721R5B2
PLY17BN1121R8B2
PLY17BN9612R0B2
PLY17BN4912R4B2
PLY17BN1023R0B2
0.1
1
Frequency (MHz)
17
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
PLY17 Series (Safety Standard Recognized)
22.5±0.5
15.0±0.5
12.5±0.5
(4)
[(1)]
24.5±0.5
1. Integration of choke coil function to suppress
differential mode/Low and High Frequency common
mode noise.
2. Low Profile (H=<13mm)
3. Safety standards: EN60065
■ Applications
ø1.0 max.
1. For AC power supply, AC adapter
2. Low profile equipment such as lighting equipment,
FPD, Digital Amplifier
A/B Type
(1) 12.5±0.5 (4)
[(2)]
[(3)]
3.5±0.5
2
(3)
[(2)]
■ Features
(in mm)
o A Type
Common Mode Inductance
(min.)
(mH)
Normal Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(Vac)
PLY17BS4912R4A2
0.49
18
2.4
250
PLY17BS9612R0A2
0.96
36
2.0
250
PLY17BS1023R0A2
1.0
36
3.0
250
PLY17BS1121R8A2
1.1
44
1.8
250
PLY17BS1721R5A2
1.7
67
1.5
250
PLY17BS2921R2A2
2.9
110
1.2
250
PLY17BS3721R0A2
3.7
140
1.0
250
PLY17BS5620R8A2
5.6
210
0.8
250
PLY17BS7820R7A2
7.8
290
0.7
250
PLY17BS9320R6A2
9.3
350
0.6
250
Part Number
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
Winding Temperature Rise (at Rated Current) (max.): 60K
o B Type
Common Mode Inductance
(min.)
(mH)
Normal Mode Inductance
(min.)
(µH)
Rated Current
(A)
Rated Voltage
(Vac)
PLY17BS4912R4B2
0.49
24
2.4
250
PLY17BS9612R0B2
0.96
47
2.0
250
PLY17BS1023R0B2
1.0
47
3.0
250
PLY17BS1121R8B2
1.1
58
1.8
250
PLY17BS1721R5B2
1.7
88
1.5
250
PLY17BS2921R2B2
2.9
140
1.2
250
PLY17BS3721R0B2
3.7
180
1.0
250
PLY17BS5620R8B2
5.6
280
0.8
250
PLY17BS7820R7B2
7.8
390
0.7
250
PLY17BS9320R6B2
9.3
460
0.6
250
Part Number
Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C
18
Winding Temperature Rise (at Rated Current) (max.): 60K
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Equivalent Circuit Diagram
■ Common Mode Insertion Loss-Frequency Characteristics
0
PLY17BS9612R0-2
PLY17BS4912R4-2
PLY17BS1023R0-2
(1)
Insertion Loss (dB)
20
(2)
(4)
(3)
2
40
PLY17BS9320R6-2
PLY17BS7820R7-2
PLY17BS5620R8-2
PLY17BS3721R0-2
60
PLY17BS2921R2-2
PLY17BS1721R5-2
PLY17BS1121R8-2
80
0.01
0.1
1
10
100
10
100
Frequency (MHz)
■ Differential Mode Insertion Loss-Frequency Characteristics
PLY17BS***B2
0
20
20
40
60
80
0.01
Insertion Loss (dB)
Insertion Loss (dB)
PLY17BS***A2
0
PLY17BS9320R6A2
PLY17BS7820R7A2
PLY17BS5620R8A2
PLY17BS3721R0A2
PLY17BS2921R2A2
PLY17BS1721R5A2
PLY17BS1121R8A2
PLY17BS9612R0A2
PLY17BS4912R4A2
PLY17BS1023R0A2
0.1
40
60
1
Frequency (MHz)
10
100
80
0.01
PLY17BS9320R6B2
PLY17BS7820R7B2
PLY17BS5620R8B2
PLY17BS3721R0B2
PLY17BS2921R2B2
PLY17BS1721R5B2
PLY17BS1121R8B2
PLY17BS9612R0B2
PLY17BS4912R4B2
PLY17BS1023R0B2
0.1
1
Frequency (MHz)
19
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Noise Suppression Effect of PLY10 Series
The data shows noise suppression effects comparison PLY10 with existing common mode choke coil. (In AC adaptor of note PC)
2
Common mode choke coil and differentical mode choke coil are used.
0.33µF
0.1µF
24mH
680µH
Hybrid choke coil PLY10
0.33µF
1000pF
0.1µF
1000pF
PLY10A1130R5D
• Noise Level
The filter circuit with hybrid choke coil has suppressed conducted noise as well as conventional filter in spite of its compact
composition.
90
80
80
70
70
60
50
60
50
40
40
30
30
20
0.5
20
Hybrid choke coil PLY10
90
Noise Level (dBµV)
Noise Level (dBµV)
Common mode choke coil and differencial mode choke coil are used.
1
5
10
Frequency (MHz)
30
20
0.5
1
5
10
Frequency (MHz)
30
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution /Notice
■ !Caution (Rating)
1. Rated Current
Operating current should not exceed the rated
value. Even if operating current is under the
rated value, adequate ventilation is required to
avoid excessive heat generated within the product
(choke coil) and from surrounding heat sources.
If exceeding these conditions, excessive heat may
cause fumes or permanent damage to the product.
Please ensure that product (choke coil) is
evaluated and confirmed against the specification
when it is mounted in your final assembled product.
-> Winding temperature should be less than
120 degree C.
*As for FKOB series winding temperature should be
less than 95 degree C.
Maximum allowable temperature at the surface of
coil (ambient temperature + winding temperature
rise) is in accordance with each safety standard
applicable to final assembled product.
When the temperature at winding exceeds maximum
allowable temperature of safety standard, the
rated current should be derated.
2. Inrush Current
Inrush current should not exceed 10 times rated
current within 1/4 cycle of 50/60Hz commercial
power line. Inrush current should be limited to a
minimum of 10 seconds after last inrush.
2
If these conditions are exceeded, excessive heat may
cause fumes or permanent damage to the component,
or at worst cause ignition.
■ Notice (Storage and Operating Condition)
1. Soldering Conditions
(1) Flux, Solder
2. Cleaning
· Rosin-based flux should be used. Do not use strong
acidic flux with halide content exceeding 0.2wt%
(chlorine conversion value)
· Use 63/37 solder (Sn/Pb = 63/37) or 60/40 solder
(Sn/Pb = 60/40). In case of lead-free solder, use
Sn-3.0Ag-0.5Cu solder
(2) Flow soldering profile
Pre-heating
Soldering
Temperature (°C)
300
200
150
150°C
100
50
60s min.
Care should be taken when transporting or handling
product to avoid excessive vibration or mechanical shock.
Soldering time
Standard profile
Product should be used within 12 months after receiving.
Solderability should be checked if this period is
exceeded.
(2) Storage conditions
Storage Temperature: -10 to 40 °C
Relative humidity: 30 to 70%
Avoid sudden changes in temperature and humidity.
Don't keep products in corrosive gases such as sulfur,
chlorine gas or acid, or it may cause oxidation of lead
terminals resulting in poor solderability or corrosion of
component windings.
(3) Handling conditions
Gradual cooling
(in air)
Soldering temperature
250
Avoid cleaning product due to non-waterproof
construction.
3. Storage and Handling Requirements
(1) Storage period
Limit profile
Sn/Pb = 60/40, Sn/Pb = 63/37 Sn-3.0Ag-0.5Cu solder
Soldering temp. Soldering time Soldering temp. Soldering time Soldering temp. Soldering time Cycle of flow
240-260°C 5s max. 250±2°C
4-6s
265±3°C
5s
2 times
For additional mounting methods, please contact Murata.
■ Notice (Soldering and Mounting)
■ Notice (Rating)
Magnetic Flux Leakage
Choke coils generate small amounts of magnetic flux
leakage that may adversely affect equipment operation
according to component arrangement.
Testing should be completed on final assembly to
ensure equipment performance is not affected.
Coil Humming Noise
Magnetic flux generated between coil and core or
between the choke coil windings creates repulsive
power between the coil windings. This repulsive
power causes the coil winding to vibrate and create
a humming noise. The amount of hum produced by the
coil is proportionate to the amount of harmonic
distortion generated by the operating current. This
does not influence the electrical performance of
the coils, but it should be considered and tested
in actual circuit application.
21
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C09E.pdf
06.2.9
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
■ Minimum Quantity
Part Number
2
Minimum Quantity (pcs.)
Magazine Package
Box
FKOB
-
100
PLA10
1800
1260
PLH10
1800
1260
PLY10
1800
1200
PLY17
1920
1080
22
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C09E.pdf
06.2.9
Note:
1. Export Control
For customers outside Japan
No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or
otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)
goods or systems specially designed or intended for military end-use or utilization by military end-users.
For customers in Japan
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
<
<
>
>
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in
applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
r Power plant equipment
t Medical equipment
y Transportation equipment (vehicles, trains, ships, etc.)
u Traffic signal equipment
i Disaster prevention / crime prevention equipment
o Data-processing equipment
!0 Application of similar complexity and/or reliability requirements to the applications listed above
3. Product specifications in this catalog are as of January 2006. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. Please read rating and
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
Head Office
1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
Phone: 81-75-951-9111
International Division
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]
Similar pages