TDK CC10-1203SF-E Insulation type dc-dc converter Datasheet

CC-E
Insulation type DC-DC converter
ks
医
ph
DENAN
その他
療
計
測
F
A
半導体
■ Features
コンピュータ
通
Built to meet
UL60950-1/
CSA C22.2 No.60950-1
その他
F
A
半導体
●Mounting area halved compared to existing products
●Nonuse of tantalum capacitor or aluminum electro-
pf-a
lytic capacitor
通
F
products
A
Symbol for number of outputs
S: Single output, D: Dual outputs
Nominal output voltage
半導体
03: 3.3V, 05: 5V, 12: 12V
●High accuracy of ± 3% in output voltage (10W of
Nominal input voltage
lower single output)
hk-a
05: 5V, 12: 12V, 24: 24V, 48: 48V
●5-side metal-shielded low noise design
Maximum output power
●Lightweight design with no resin filled up
1R5: 1.5W, 3: 3W, 6:6W
10: 10W, 15: 15W, 25: 25W
●Supports DIP insertion,SMD mounting and SIP verti-
Representing series name by
cal insertion (3W products)
hws
combination with "-E"at the end
●Approved by UL60950-1, CSA C22.2 No.60950-1
■ Applications
通
信
医
療
計
測
F
■ Conformity to RoHS Directive
その他
(C-UL), and EN60950-1 (NEMKO)
コンピュータ
A
半導体
This means that, in conformity with EU Directive
2002/95/EC, lead, cadmium, mercury, hexavalent
chromium, and specific bromine-based flame retar-
フォーマット
dants, PBB and PBDE, have not been used, except for
exempted applications.
■ Product Line up
alpha
Output Input
power
voltage
コンピュータ
5V
dlp
1.5W
医
DIP type
療
計
SMD type
測
F
A
半導体
SIP type Output current
DIP type
SMD type
Model name
(output voltage: 12V/15V)
SIP type Output current
DIP type
SMD type
Model name
(output voltage: ±12V/±15V)
SIP type Output current
DIP type
SMD type
SIP type
0.3A CC1R5-0505SF-E CC1R5-0505SR-E
-
0.125A (0.1A) CC1R5-0512SF-E CC1R5-0512SR-E
-
0.06A (0.05A) CC1R5-0512DF-E CC1R5-0512DR-E
-
12V 0.4A CC1R5-1203SF-E CC1R5-1203SR-E
-
0.3A CC1R5-1205SF-E CC1R5-1205SR-E
-
0.125A (0.1A) CC1R5-1212SF-E CC1R5-1212SR-E
-
0.06A (0.05A) CC1R5-1212DF-E CC1R5-1212DR-E
-
24V 0.4A CC1R5-2403SF-E CC1R5-2403SR-E
-
その他
0.3A CC1R5-2405SF-E
CC1R5-2405SR-E
-
0.125A (0.1A) CC1R5-2412SF-E CC1R5-2412SR-E
-
0.06A (0.05A) CC1R5-2412DF-E CC1R5-2412DR-E
-
48V 0.4A
CC1R5-4803SF-E
CC1R5-4803SR-E
通 信
医 療
計 測
-F
0.3A 半導体
CC1R5-4805SF-E CC1R5-4805SR-E
-
0.125A (0.1A) CC1R5-4812SF-E CC1R5-4812SR-E
-
0.06A (0.05A) CC1R5-4812DF-E CC1R5-4812DR-E
-
A
0.8A CC3-0503SF-E CC3-0503SR-E CC3-0503SS-E 0.6A
CC3-0505SF-E
CC3-0505SR-E CC3-0505SS-E 0.25A (0.2A) CC3-0512SF-E
CC3-0512SR-E CC3-0512SS-E 0.125A (0.1A) CC3-0512DF-E
CC3-0512DR-E CC3-0512DS-E
12V 0.8A CC3-1203SF-E CC3-1203SR-E CC3-1203SS-E 0.6A
CC3-1205SF-E
CC3-1205SR-E CC3-1205SS-E 0.25A (0.2A) CC3-1212SF-E
CC3-1212SR-E CC3-1212SS-E 0.125A (0.1A) CC3-1212DF-E
CC3-1212DR-E CC3-1212DS-E
24V 0.8A CC3-2403SF-E CC3-2403SR-E CC3-2403SS-E 0.6A
CC3-2405SF-E
CC3-2405SR-E CC3-2405SS-E 0.25A (0.2A) CC3-2412SF-E
CC3-2412SR-E CC3-2412SS-E 0.125A (0.1A) CC3-2412DF-E
CC3-2412DR-E CC3-2412DS-E
48V 0.8A CC3-4803SF-E CC3-4803SR-E CC3-4803SS-E 0.6A
その他
CC3-4805SF-E
CC3-4805SR-E CC3-4805SS-E 0.25A (0.2A) CC3-4812SF-E
CC3-4812SR-E CC3-4812SS-E 0.125A (0.1A) CC3-4812DF-E
CC3-4812DR-E CC3-4812DS-E
CC6-0505SF-E
CC6-0505SR-E
-
0.5A (0.4A) CC6-0512SF-E
CC6-0512SR-E
-
0.25A (0.2A) CC6-0512DF-E
CC6-0512DR-E
-
CC6-1205SF-E
CC6-1205SR-E
-
0.5A (0.4A) CC6-1212SF-E
CC6-1212SR-E
-
0.25A (0.2A) CC6-1212DF-E
CC6-1212DR-E
-
5V
コンピュータ
6W
信
その他
Model
name
(output voltage: 5V)
-
5V
3W
通
Output current
Model name
(output voltage: 3.3V)
0.4A CC1R5-0503SF-E CC1R5-0503SR-E
コンピュータ
fps
warranty
R: Horizontally-mounted SMD type
FS Vertically-mounted SIP type
その他
信
5
Low Voltage Directive Electrical Appliance
and Material Safety Law
(Input Voltage 100VAC)
Shape F: Horizontally-mounted DIP type
●Remote On/Off function incorporated in all series of
コンピュータ
EN60950-1
Low Voltage Directive Electrical
UL60950-1/
Appliance
CSA
C22.2 No.60950-1
and Material
Safety Law
(Input Voltage 100VAC)
■ Model-naming method
CC 3 - 05 05 S F -E
その他
信
EN60950-1
Y
E
A
R
DENAN
S
Built to meet
1.2A
CC6-0503SF-E
CC6-0503SR-E
通 信
医 療
計 測
12V 1.2A CC6-1203SF-E CC6-1203SR-E
-F
-
A
1A
1.2A
半導体
24V 1.2A CC6-2403SF-E CC6-2403SR-E
-
1.2A
CC6-2405SF-E
CC6-2405SR-E
-
0.5A (0.4A) CC6-2412SF-E
CC6-2412SR-E
-
0.25A (0.2A) CC6-2412DF-E
CC6-2412DR-E
-
48V 1.2A CC6-4803SF-E CC6-4803SR-E
-
1.2A
CC6-4805SF-E
CC6-4805SR-E
-
0.5A (0.4A) CC6-4812SF-E
CC6-4812SR-E
-
0.25A (0.2A) CC6-4812DF-E
CC6-4812DR-E
-
5V
2.5A CC10-0503SF-E CC10-0503SR-E
-
2A
CC10-0505SF-E CC10-0505SR-E
-
0.8A (0.64A) CC10-0512SF-E CC10-0512SR-E
-
0.4A (0.32A) CC10-0512DF-E CC10-0512DR-E
-
12V 2.5A CC10-1203SF-E CC10-1203SR-E
-
2A
CC10-1205SF-E CC10-1205SR-E
-
1A (0.8A) CC10-1212SF-E CC10-1212SR-E
-
0.45A (0.36A) CC10-1212DF-E CC10-1212DR-E
-
24V 2.5A CC10-2403SF-E CC10-2403SR-E
-
2A
CC10-2405SF-E CC10-2405SR-E
-
1A (0.8A) CC10-2412SF-E CC10-2412SR-E
-
0.45A (0.36A) CC10-2412DF-E CC10-2412DR-E
-
48V 2.5A CC10-4803SF-E CC10-4803SR-E
-
2A
CC10-4805SF-E CC10-4805SR-E
-
1A (0.8A) CC10-4812SF-E CC10-4812SR-E
-
0.45A (0.36A) CC10-4812DF-E CC10-4812DR-E
-
15W 24V 4.5A CC15-2403SF-E CC15-2403SR-E
-
3A
CC15-2405SF-E CC15-2405SR-E
-
-
-
-
-
-
-
-
-
25W 24V 7.5A CC25-2403SF-E CC25-2403SR-E
-
5A
CC25-2405SF-E CC25-2405SR-E
-
-
-
-
-
-
-
-
-
10W
・All specifications are subject to change without notice.
001-01/20080421/etl_cc_e
CC1R5-E
CC1R5-E Specifications
MODEL CC1R5-0503Sx-E CC1R5-0505Sx-E
CC1R5-0512Sx-E
CC1R5-0512Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC5.0
Voltage Range
V
DC4.5-9.0
Input
Efficiency (typ)
(*1) %
71
77
80
79
Current (typ)
(*1) A
0.372
0.390
0.375
0.380
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.400
0.300
0.125
0.100
0.060
0.050
Maximum Power
(*2) W
1.32
1.5
Maximum Line Regulation (Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature–40°
C to +50°
C)
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
3.2
Mechanical
Size (W x H x D)
mm
DIP: 16.51 x 8.5 x 16.6 / SMD: 16.51 x 8.8 x 16.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC1R5-1203Sx-E CC1R5-1205Sx-E
CC1R5-1212Sx-E
CC1R5-1212Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC12
Voltage Range
V
DC9.0-18
Input
Efficiency (typ)
(*1) %
73
78
82
81
Current (typ)
(*1) A
0.151
0.160
0.152
0.154
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.400
0.300
0.125
0.100
0.060
0.050
Maximum Power
(*2) W
1.32
1.5
Maximum Line Regulation (Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature–40°
C to +50°
C)
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4 - ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
3.2
Mechanical
Size (W x H x D)
mm
DIP: 16.51 x 8.5 x 16.6 / SMD: 16.51 x 8.8 x 16.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
CC1R5-E
MODEL CC1R5-2403Sx-E CC1R5-2405Sx-E
CC1R5-2412Sx-E
CC1R5-2412Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC24
Voltage Range
V
DC18-36
Input
Efficiency (typ)
(*1) %
72
77
81
79
Current (typ)
(*1) A
0.076
0.081
0.077
0.079
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.400
0.300
0.125
0.100
0.060
0.050
Maximum Power
(*2) W
1.32
1.5
Maximum Line Regulation (Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature–40°
C to +50°
C)
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
3.2
Mechanical
Size (W x H x D)
mm
DIP: 16.51 x 8.5 x 16.6 / SMD: 16.51 x 8.8 x 16.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC1R5-4803Sx-E CC1R5-4805Sx-E
CC1R5-4812Sx-E
CC1R5-4812Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC48
Voltage Range
V
DC36-76
Input
Efficiency (typ)
(*1) %
70
76
80
79
Current (typ)
(*1) A
0.039
0.041
0.039
0.040
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.400
0.300
0.125
0.100
0.060
0.050
Maximum Power
(*2) W
1.32
1.5
Maximum Line Regulation (Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature–40°
C to +50°
C)
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
3.2
Mechanical
Size (W x H x D)
mm
DIP: 16.51 x 8.5 x 16.6 / SMD: 16.51 x 8.8 x 16.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
CC1R5-E
Outline Drawing
16.6±0.2
Recommended measurements for
mounting board
14.605
2.92
8.5max.
4.0
Shape/Dimensions
5
7-0.3×0.6
6
7
a
1
b
0.5
2-ø1.5 (land diameter ø2.5)
16.51
3.5
2
7-ø1.0 (land diameter ø2.0)
1.0
0.5
b
4
2.7
a
2.54 5.08 2.54
2.54
(3.22)
1.905
a
3
7.62
(3.22)
12.7
7.62
13.08
12.7
16.51
1.905
Outer shape of
product
10.16
3.5
t=0.3
2.54 5.08 2.54
CC1R5-xxxxxF-E (DIP type)
b
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
2.7
CC1R5-xxxxxR-E (SMD type)
16.6±0.2
Recommended measurements for
mounting board
(3.22)
2
5
7-0.3×0.6
6
1
(3.22)
3.2
7
6
–Vin
2
3
5
No.1
No.2
No.3
No.4
No.5
No.6
No.7
TRM
–Vout
4 NC
+Vin
+Vin
RC
–Vin
NC
–Vout
TRM
+Vout
7
1
6
RC
5
2
4
3
–Vin
Derating Curve
Output power (%)
100
Natural air cooling
80
a
b
60
40
20
a:0.5m/s(100LFM)
b:1m/s(200LFM)
0
-40 -20
0
20
40
60
80 100
Ambient temperature (°
C)
Output power derating by ambient temperature
(common specification)
・All specifications are subject to change without notice.
Terminal connections
+Vout
TRM
COM
–Vout
Load
RC
+Vout
CC1R5-xxxxDx-E
Load
7
Terminal connections
Load
1
3.2
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
Connection diagram
CC1R5-xxxxSx-E
+Vin
15.6
22.0
2.54 5.08 2.54
4
2.54 5.08 2.54
1.8
3
7.62
2.54
(3.22)
1.8
(13.38)
Coplanarity: 0.1 or lower
19.81
1.2
16.51
Outer shape of
product
10.16
t=0.3
7.62
8.8max.
4.0
Shape/Dimensions
No.1
No.2
No.3
No.4
No.5
No.6
No.7
+Vin
RC
–Vin
–Vout
Common out
TRM
+Vout
CC3-E(DIP/SMD)
CC3-E Specifications
MODEL CC3-0503Sx-E
CC3-0505Sx-E
CC3-0512Sx-E
CC3-0512Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC5.0
Voltage Range
V
DC4.5-9.0
Input
Efficiency (typ)
(*1) %
73
77
82
81
Current (typ)
(*1) A
0.723
0.779
0.732
0.741
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.800
0.600
0.250
0.200
0.125
0.100
Maximum Power
(*2)
2.64
3
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, X/Y/Z 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
4.5
Mechanical
Size (W x H x D)
mm
DIP: 22.86 x 8.5 x 16.6 / SMD: 22.86 x 8.8 x 16.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC3-1203Sx-E
CC3-1205Sx-E
CC3-1212Sx-E
CC3-1212Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC12
Voltage Range
V
DC9.0-18
Input
Efficiency (typ)
(*1) %
74
79
82
81
Current (typ)
(*1) A
0.297
0.316
0.305
0.309
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.800
0.600
0.250
0.200
0.125
0.100
Maximum Power
(*2) W
2.64
3
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, X/Y/Z 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
4.5
Mechanical
Size (W x H x D)
mm
DIP: 22.86 x 8.5 x 16.6 / SMD: 22.86 x 8.8 x 16.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
CC3-E(DIP/SMD)
MODEL CC3-2403Sx-E
CC3-2405Sx-E
CC3-2412Sx-E
CC3-2412Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC24
Voltage Range
V
DC18-36
Input
Efficiency (typ)
(*1) %
73
78
82
81
Current (typ)
(*1) A
0.151
0.160
0.152
0.154
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.800
0.600
0.250
0.200
0.125
0.100
Maximum Power
(*2) W
2.64
3
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, X/Y/Z 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
4.5
Mechanical
Size (W x H x D)
mm
DIP: 22.86 x 8.5 x 16.6 / SMD: 22.86 x 8.8 x 16.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC3-4803Sx-E
CC3-4805Sx-E
CC3-4812Sx-E
CC3-4812Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC48
Voltage Range
V
DC36-76
Input
Efficiency (typ)
(*1) %
73
79
81
80
Current (typ)
(*1) A
0.075
0.079
0.077
0.078
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.800
0.600
0.250
0.200
0.125
0.100
Maximum Power
(*2) W
2.64
3
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, X/Y/Z 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
4.5
Mechanical
Size (W x H x D)
mm
DIP: 22.86 x 8.5 x 16.6 / SMD: 22.86 x 8.8 x 16.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
CC3-E(DIP/SMD)
Outline Drawing
CC3-xxxxxF-E (DIP type)
16.6±0.2
Recommended measurements for mounting board
2.92
20.32
22.86
2.54
a
2-ø1.5 (land diameter ø2.5)
5
7-0.3×0.6
6
7
b
22.86
1.0
0.5
2
7.62
4
3.5
b
3
1
(3.22)
2.7
a
7-ø1.0 (land diameter ø2.0)
0.5
17.78
2.54 5.08 2.54
2.54
(3.22)
2.54
Outer shape of product
2.54 5.08 2.54
13.08
17.78
10.16
3.5
t=0.3
7.62
8.5max.
4.0
Shape/Dimensions
b
2.7
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
a
CC3-xxxxxR-E (SMD type)
16.6±0.2
(3.22)
Recommended measurements for mounting board
7.62
2.54 5.08 2.54
Coplanarity: 0.1 or lower
Outer shape of product
1.2
22.86
(13.38)
t=0.3
10.16
8.8max.
4.0
Shape/Dimensions
26.16
1.8
1.8
3.2
22.0
3.2
4
2
5
7-0.3×0.6
6
1
(3.22)
2.54 5.08 2.54
3
7.62
2.54
(3.22)
28.4
7
Connection diagram
CC3-xxxxSx-E
+Vin
7
–Vin
5
2
3
No.1
No.2
No.3
No.4
No.5
No.6
No.7
TRM
–Vout
4 NC
CC3-xxxxDx-E
+Vin
+Vin
RC
–Vin
NC
–Vout
TRM
+Vout
7
1
6
RC
5
2
4
3
–Vin
Derating Curve
Output power (%)
100
Natural air cooling
80
a
b
60
40
20
a:0.5m/s(100LFM)
b:1m/s(200LFM)
0
-40 -20
0
20
40
60
80 100
Ambient temperature (°
C)
Output power derating by ambient temperature
(common specification)
・All specifications are subject to change without notice.
Terminal connections
+Vout
TRM
COM
–Vout
Load
RC
+Vout
Load
6
Terminal connections
Load
1
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
No.1
No.2
No.3
No.4
No.5
No.6
No.7
+Vin
RC
–Vin
–Vout
Common out
TRM
+Vout
CC3-E(SIP)
CC3-E Specifications
MODEL CC3-0503SS-E
CC3-0505SS-E
CC3-0512SS-E
CC3-0512DS-E
ITEMS/UNITS
Nominal Voltage
V
DC5.0
Voltage Range
V
DC4.5-9.0
Input
Efficiency (typ)
(*1) %
73
77
82
81
Current (typ)
(*1) A
0.723
0.779
0.732
0.741
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.800
0.600
0.250
0.200
0.125
0.100
Maximum Power
(*2) W
2.64
3
Maximum Line Regulation (Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.67
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
7
Mechanical
Size (W x H x D)
mm
27.8 x 17.9 x 9.2
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC3-1203SS-E
CC3-1205SS-E
CC3-1212SS-E
CC3-1212DS-E
ITEMS/UNITS
Nominal Voltage
V
DC12
Voltage Range
V
DC9.0-18
Input
Efficiency (typ)
(*1) %
73
79
82
Current (typ)
(*1) A
0.301
0.316
0.305
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.800
0.600
0.250
0.200
0.125
0.100
Maximum Power
(*2) W
2.64
3
Maximum Line Regulation (Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.67
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
7
Mechanical
Size (W x H x D)
mm
27.8 x 17.9 x 9.2
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
CC3-E(SIP)
MODEL CC3-2403SS-E
CC3-2405SS-E
CC3-2412SS-E
CC3-2412DS-E
ITEMS/UNITS
Nominal Voltage
V
DC24
Voltage Range
V
DC18-36
Input
Efficiency (typ)
(*1) %
73
78
82
81
Current (typ)
(*1) A
0.151
0.160
0.152
0.154
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.800
0.600
0.250
0.200
0.125
0.100
Maximum Power
(*2) W
2.64
3
Maximum Line Regulation (Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.67
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
7
Mechanical
Size (W x H x D)
mm
27.8 x 17.9 x 9.2
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC3-4803SS-E
CC3-4805SS-E
CC3-4812SS-E
CC3-4812DS-E
ITEMS/UNITS
Nominal Voltage
V
DC48
Voltage Range
V
DC36-76
Input
Efficiency (typ)
(*1) %
73
79
82
Current (typ)
(*1) A
0.075
0.079
0.076
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
0.800
0.600
0.250
0.200
0.125
0.100
Maximum Power
(*2) W
2.64
3
Maximum Line Regulation (Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
7
Mechanical
Size (W x H x D)
mm
27.8 x 17.9 x 9.2
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
CC3-E(SIP)
10
Outline Drawing
CC3-xxxxxS-E (SIP type)
9.2
17.9
Shape/Dimensions
(0.5)
3.5
(0.5)
4.1
P
P
P
P
2P
P
22.86
P
P
2.47
P
6
17.78
P=2.54
27.8
3
4
5
7
8
9 10
a
0.5
2
Recommended measurements for mounting board
a
9.2
1
5.01
27.8
2.47
22.86
2.47
17.78
4
2-ø1.5 (land diameter ø2.5)
P=2.54
SMD mounting space
P
P
P
P
2P
P
P
P
9.2
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
6.0
2.47
1(t=0.3)
9-ø0.8 (land diameter ø2.0)
Load
7
Load Load
Derating Curve
Output power (%)
100
Natural air cooling
80
a
b
60
40
20
a:0.5m/s(100LFM)
b:1m/s(200LFM)
0
-40 -20
0
20
40
60
80 100
Ambient temperature (°
C)
Output power derating by ambient temperature
(common specification)
・All specifications are subject to change without notice.
8
9
+Vin
5
–Vin
4
+Vin
3
RC
2
TRM
1
–Vout
10
COM
9
+Vout
NC
NC
–Vout
TRM
NC
RC
–Vin
+Vin
+Vin
COM
8
Terminal connections
+Vout
7
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
No.10
+Vin
5
–Vin
4
+Vin
3
RC
2
–Vout
1
CC3-xxxxDS-E
Terminal connections
TRM
+Vout
Connection diagram
CC3-xxxxSS-E
10
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
No.10
+Vout
COM
COM
–Vout
TRM
NC
RC
–Vin
+Vin
+Vin
11
CC6-E
CC6-E Specifications
MODEL CC6-0503Sx-E
CC6-0505Sx-E
CC6-0512Sx-E
CC6-0512Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC5.0
Voltage Range
V
DC4.5-9.0
Input
Efficiency (typ)
(*1) %
76
79
82
Current (typ)
(*1) A
1.042
1.266
1.463
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
1.200
1.000
0.500
0.400
0.250
0.200
Maximum Power
(*2) W
3.96
5
6
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
5.8
Mechanical
Size (W x H x D)
mm
DIP: 22.86 x 8.5 x 21.1 / SMD: 22.86 x 8.8 x 21.1
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC6-1203Sx-E
CC6-1205Sx-E
CC6-1212Sx-E
CC6-1212Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC12
Voltage Range
V
DC9.0-18
Input
Efficiency (typ)
(*1) %
78
82
85
Current (typ)
(*1) A
0.423
0.610
0.588
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
1.200
0.500
0.400
0.250
0.200
Maximum Power
(*2) W
3.96
6
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
5.8
Mechanical
Size (W x H x D)
mm
DIP: 22.86 x 8.5 x 21.1 / SMD: 22.86 x 8.8 x 21.1
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
CC6-E
MODEL CC6-2403Sx-E
CC6-2405Sx-E
CC6-2412Sx-E
CC6-2412Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC24
Voltage Range
V
DC18-36
Input
Efficiency (typ)
(*1) %
77
81
87
86
Current (typ)
(*1) A
0.214
0.309
0.287
0.291
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
1.200
0.500
0.400
0.250
0.200
Maximum Power
(*2) W
3.96
6
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
5.8
Mechanical
Size (W x H x D)
mm
DIP: 22.86 x 8.5 x 21.1 / SMD: 22.86 x 8.8 x 21.1
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC6-4803Sx-E
CC6-4805Sx-E
CC6-4812Sx-E
CC6-4812Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC48
Voltage Range
V
DC36-76
Input
Efficiency (typ)
(*1) %
77
81
86
Current (typ)
(*1) A
0.107
0.154
0.145
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
1.200
0.500
0.400
0.250
0.200
Maximum Power
(*2) W
3.96
6
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
5.8
Mechanical
Size (W x H x D)
mm
DIP: 22.86 x 8.5 x 21.1 / SMD: 22.86 x 8.8 x 21.1
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
12
13
CC6-E
Outline Drawing
CC6-xxxxxF-E (DIP type)
21.1±0.2
Recommended measurements for mounting board
20.32
2.63
8.5max.
4.0
Shape/Dimensions
10.16
5.08
17.78
15.24
17.87
3.5
t=0.3
5.08
Outer shape of product
7-ø1.0 (land diameter ø2.0)
a
b
2.7
0.5
2.54
5.08
4
7-0.3×0.6
2
22.86
1.0
5
a
5.08
10.16
2-ø1.5 (land diameter ø2.5)
3.5
b
3
0.5
5.08 (2.93)
2.54
5.08
22.86
2.7
5.08
6
(2.93)
1
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
7
b
a
CC6-xxxxxR-E (SMD type)
21.1±0.2
(2.93)
Recommended measurements for mounting board
Outer shape of product
3
4
7-0.3×0.6
3.2
22.0
3.2
28.4
5
10.16
5.08
2
(2.93)
5.08
5.08
1.8
5.08
5.08 (2.93)
1.8
1.2
(18.17)
Coplanarity: 0.1 or lower
10.16
22.86
26.16
15.24
t=0.3
5.08
8.8max.
4.0
Shape/Dimensions
5.08
6
1
7
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
Connection diagram
CC6-xxxxSx-E
+Vin
7
–Vin
5
2
3
–Vout
4 NC
+Vin
+Vin
RC
–Vin
NC
–Vout
TRM
+Vout
Terminal connections
7
1
6
RC
5
2
4
3
–Vin
Derating Curve
Output power (%)
100
Natural air cooling
80
a
b
60
40
20
a:0.5m/s(100LFM)
b:1m/s(200LFM)
0
-40 -20
0
20
40
60
80 100
Ambient temperature (°
C)
Output power derating by ambient temperature
(common specification)
・All specifications are subject to change without notice.
+Vout
TRM
COM
–Vout
Load
RC
TRM
Load
6
No.1
No.2
No.3
No.4
No.5
No.6
No.7
CC6-xxxxDx-E
Load
1
Terminal connections
+Vout
No.1
No.2
No.3
No.4
No.5
No.6
No.7
+Vin
RC
–Vin
–Vout
Common out
TRM
+Vout
14
CC10-E
CC10-E Specifications
MODEL CC10-0503Sx-E CC10-0505Sx-E
CC10-0512Sx-E
CC10-0512Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC5.0
Voltage Range
V
DC4.5-9.0
Input
Efficiency (typ)
(*1) %
84
83
Current (typ)
(*1) A
1.964
2.381
2.286
2.313
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
2.500
2.000
0.800
0.640
0.400
0.320
Maximum Power
(*2) W
8.25
10
9.6
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
10
Mechanical
Size (W x H x D)
mm
DIP: 35.56 x 8.5 x 22.6 / SMD: 35.56 x 8.8 x 22.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC10-1203Sx-E CC10-1205Sx-E
CC10-1212Sx-E
CC10-1212Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC12
Voltage Range
V
DC9.0-18
Input
Efficiency (typ)
(*1) %
84
86
88
86
Current (typ)
(*1) A
0.318
0.969
1.136
1.047
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
2.500
2.000
1000
800
450
360
Maximum Power
(*2) W
8.25
10
12
10.8
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
10
Mechanical
Size (W x H x D)
mm
DIP: 35.56 x 8.5 x 22.6 / SMD: 35.56 x 8.8 x 22.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
CC10-E
MODEL CC10-2403Sx-E CC10-2405Sx-E
CC10-2412Sx-E
CC10-2412Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC24
Voltage Range
V
DC18-36
Input
Efficiency (typ)
(*1) %
84
86
87
86
Current (typ)
(*1) A
0.409
0.484
0.575
0.523
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
2.500
2.000
1.000
0.800
0.450
0.360
Maximum Power
(*2) W
8.25
10
12
10.8
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
10
Mechanical
Size (W x H x D)
mm
DIP: 35.56 x 8.5 x 22.6 / SMD: 35.56 x 8.8 x 22.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
MODEL CC10-4803Sx-E CC10-4805Sx-E
CC10-4812Sx-E
CC10-4812Dx-E
ITEMS/UNITS
Nominal Voltage
V
DC48
Voltage Range
V
DC36-76
Input
Efficiency (typ)
(*1) %
84
86
88
86
Current (typ)
(*1) A
0.205
0.242
0.284
0.262
Nominal Voltage
VDC
3.3
5
12
15
± 12
± 15
Maximum Current
A
2.500
2.000
1.000
0.800
0.450
0.360
Maximum Power
(*2) W
8.25
10
12
10.8
Maximum Line Regulation(Within input voltage range) mV
20
40
80
Maximum Load Regulation (0-100% load) (*3) mV
40
100
600
Output
Temperature Coefficient
80mV
200mV
300mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max) (*4) %
±3
±5
Maximum Ripple & Noise (typ/max) (*5) mVp-p
40/120
30/120
Voltage Adjustable Range
VDC
3.15-3.6
4.75-6.0
11.4-15.0
± 11.4- ± 15.0
Over Current Protection
(*6)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38°
C in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
10
Mechanical
Size (W x H x D)
mm
DIP: 35.56 x 8.5 x 22.6 / SMD: 35.56 x 8.8 x 22.6
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
Note: For 12V/ ± 12V models, output power can be set to 15V/ ± 15V by connecting the output adjustment terminal TRM to -Vout.
Note: For ± 12V model, output voltage can be set to 24V or 30V single output by making the COM terminal open.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) In balanced load for dual outputs ( "balanced load" means a condition where the +output and -output of load current are equal).
(*4) Output voltage includes input change, load change (balanced load), and temperature change.
(*5) In 50MHz, Ta=25°
C.
(*6) Output current restriction method. Automatically resumes when the causes are removed. Never operate the unit under output-shorted or overload conditions for over 30
seconds.
・All specifications are subject to change without notice.
15
16
CC10-E
Outline Drawing
CC10-xxxxxF-E (DIP type)
Recommended measurements for mounting board
30.48
25.4
Outer shape of
product
5.08 5.08 5.08
18.62
3.5
t=0.3
15.24
4.0
8.5max.
22.6±0.2
10.16 3.38
Shape/Dimensions
7-ø1.0 (land diameter ø2.0)
35.56
25.4
5.08
2-ø1.5 (land diameter ø2.5)
0.5
5.08
a
4
5
6
7-0.3×0.6
1
b
a
7
b
2.7
0.5
(3.68) 10.16
2
2.7
3.5
3
b
5.08 5.08 5.08
5.08
(3.68)
35.56
a
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
1.0
CC10-xxxxxR-E (SMD type)
Shape/Dimensions
Recommended measurements for mounting board
1.8
3
4
2
5
6
7-0.3×0.6
7
1
3.2
5.08 5.08 5.08
(3.68) 10.16
5.08
(3.68)
1.8
CC10-xxxxDx-E
7
3
TRM
No.1
No.2
No.3
No.4
No.5
No.6
No.7
–Vout
4 NC
+Vin
+Vin
RC
–Vin
NC
–Vout
TRM
+Vout
7
1
6
RC
–Vin
5
2
4
3
Derating Curve
Output power (%)
100
Natural air cooling
80
a
b
60
40
20
a:0.5m/s(100LFM)
b:1m/s(200LFM)
0
-40 -20
0
20
40
60
80 100
Ambient temperature (°
C)
Output power derating by ambient temperature
(common specification)
・All specifications are subject to change without notice.
Terminal connections
+Vout
TRM
COM
–Vout
Load
–Vin
5
2
Terminal connections
+Vout
Load
6
RC
3.2
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
Load
1
34.6
41.0
Connection diagram
CC10-xxxxSx-E
+Vin
5.08 5.08 5.08
(18.92)
Coplanarity: 0.1 or lower
38.86
Outer shape of
product
1.2
35.56
15.24
t=0.3
10.16
8.8max.
4.0
(3.68)
22.6±0.2
No.1
No.2
No.3
No.4
No.5
No.6
No.7
+Vin
RC
–Vin
–Vout
Common out
TRM
+Vout
17
CC15-E
CC15-E Specifications
MODEL
CC15-2403Sx-E
CC15-2405Sx-E
ITEMS/UNITS
Nominal Voltage
V
DC24
Voltage Range
V
DC18-36
Input
Efficiency (typ)
(*1) %
89
Current (typ)
(*1) A
0.695
0.702
Nominal Voltage
VDC
3.3
5
Maximum Current
A
4.500
3.000
Maximum Power
(*2) W
14.85
15
Maximum Line Regulation(Within input voltage range) mV
65
100
Maximum Load Regulation (0-100% load) mV
120
200
Output
Temperature Coefficient
80mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max)(*3) %
+5/-3
Maximum Ripple & Noise (typ/max) (*4) mVp-p
40/120
Voltage Adjustable Range
Not available
Over Current Protection
(*5)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 6 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
12.5
Mechanical
Size (W x H x D)
mm
DIP: 37.55 x 7.0 x 32.1 / SMD: 37.55 x 7.5 x 32.1
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) Output voltage includes input change, load change (balanced load), and temperature change.
(*4) In 50MHz, Ta=25°
C.
(*5) Latch method Resumes by restarting input or resetting remote on/off.
・All specifications are subject to change without notice.
18
CC15-E
Outline Drawing
CC15-xxxxxSF-E (DIP type)
Recommended measurements for mounting board
6.075
27.33
25.4
6.075
37.55
17-0.3×0.6
b
a
10.16
2-ø1.5 (land diameter ø2.5)
1.0
b
6.075
31.475
P=2.54
37.55
2.7
17
a
0.5
11
12
13
14
15
16
25-ø1.0 (land diameter ø2.0)
3.5
b
Outer shape of product
0.5
a
2.54
10
9
8
7
6
5
4
3
2
1
2.7
22.86
t=0.3
10.16
3.0
(4.62)
2.54
(4.62)
P P P P P P P P 4.47
32.1
7.0max.
38.1
P P P P P
Shape/Dimensions
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
CC15-xxxxxSR-E (SMD type)
Recommended measurements for mounting board
(4.62)
27.33
11
12
13
14
15
16
2.54
10
9
8
7
6
5
4
3
2
1
17-0.3×0.6
10.16
Coplanarity: 0.1 or lower
10.16
2.54
(4.62)
40.9
22.86
t=0.3
Outer shape of product
3.2
17
1.8
+Vin
–Vout
Load
–Vin
Terminal connections
17
16
15
14
13
12
11
+Vout
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
NC
NC
RC
NC
NC
+Vin
+Vin
–Vin
–Vin
No.10
No.11
No.12
No.13
No.14
No.15
No.16
No.17
NC
NC
+Vout
+Vout
+Vout
–Vout
–Vout
NC
Derating Curve
Output power (%)
100
Natural air cooling
80
a
b
60
40
20
a:0.5m/s(100LFM)
b:1m/s(200LFM)
0
-40 -20
0
20
40
60
80 100
Ambient temperature (°
C)
Output power derating by ambient temperature
(common specification)
・All specifications are subject to change without notice.
3.2
P=2.54
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
Connection diagram
1
2
3
4
5
6
7
8
9
10
36.6
43.0
1.8
RC
P P P P P
7.5max.
32.1
1.2
38.1
P P P P P P P P P 4.47
Shape/Dimensions
19
CC25-E
CC25-E Specifications
MODEL
CC25-2403Sx-E
CC25-2405Sx-E
ITEMS/UNITS
Nominal Voltage
V
DC24
Voltage Range
V
DC18-36
Input
Efficiency (typ)
(*1) %
90
Current (typ)
(*1) A
1.146
1.157
Nominal Voltage
VDC
3.3
5
Maximum Current
A
7.500
5.000
Maximum Power
(*2) W
24.75
25
Maximum Line Regulation (Within input voltage range) mV
65
100
Maximum Load Regulation (0-100% load) mV
120
200
Output
Temperature Coefficient
80mV
(Ambient temperature -40℃ to +50℃ )
Max Power Total Regulation (max)(*3) %
+5/-3
Maximum Ripple & Noise (typ/max) (*4) mVp-p
40/120
Voltage Adjustable Range
VDC
Not available
Over Current Protection
(*5)
Available
Function Over Voltage Protection
Not available
Remote ON/OFF Control
Available
Operating Temperature
℃
-40 to +85
Storage Temperature
℃
-40 to +85
Operating Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Environment
Storage Humidity
% RH
5-95 (the conditions of maximum 38℃ in wet bulb temperature and non-condensation should be ensured.)
Vibration
10-55Hz, 15 minutes sweep and 1.52mm total amplitude, 3 directions, 2h for each
Shock
980m/s² (100G), 6ms, 3 directions, 3 times for each, in non-operation
Withstand Voltage
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VAC (for 1 minute)
Isolation
Isolation Resistance
Between input terminal and case, between input terminal and output terminal, and between output terminal and case: 500VDC, 50MΩ min
Standards Safety Standards
UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (NEMKO)
Weight (typ)
g
20
Mechanical
Size (W x H x D)
mm
DIP: 42.65 x 7.0 x 44.9 / SMD: 42.65 x 7.5 x 44.9
Note: "x" in model names is to be replaced by a symbol which represents the terminal configuration (F: DIP/R: SMD) for actual model names.
Note: With nominal input/output voltage, maximum output current, and Ta=25°
C, if not specified separately.
(*1) With nominal input voltage, maximum output current, and Ta=25°
C.
(*2) The maximum output power value is between -40°
C and +50°
C. For use in outside this temperature range, derating is needed.
(*3) Output voltage includes input change, load change (balanced load), and temperature change.
(*4) In 50MHz, Ta=25°
C.
(*5) Latch method Resumes by restarting input or resetting remote on/off.
・All specifications are subject to change without notice.
20
CC25-E
Outline Drawing
CC25-xxxxSF-E (DIP type)
Shape/Dimensions
Recommended measurements for mounting board
43.2
30.5
5.08
PPPPP
6.075
6.075
6
5
4
3
2
1
35.56
PPP
6.075
36.575
42.65
P=2.54
25
b
a
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
Recommended measurements for mounting board
43.2
7.5max.
4.52
44.9
Outer shape of product
35.56
40.08
(4.67)
48.1
25
Terminal connections
–Vout
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
Load
25
24
23
22
21
20
19
18
17
16
15
14
3.2
P=2.54
Unit: mm
Allowable tolerance is ±0.5 if not specified separately.
Connection diagram
1
2
RC
3
4
5
–Vin 6
7
8
9
10
11
12
+Vin 13
41.7
3.2
(4.67)
6
5
4
3
2
1
PPP
9
8
7
14
15
16
17
18
19
20
21
22
23
24
10.16
13
12
11
10
P P P P P P P P P P 10.16
Coplanarity: 0.1 or lower
1.8
5.08
PP
46.0
5.08
PPPPP
t=0.3
1.8
5.08
2-ø1.5 (land diameter ø2.5)
2.7
Shape/Dimensions
5.08
5.08
PP
1.0
a
CC25-xxxxSR-E (SMD type)
2.54
25-ø1.0 (land diameter ø2.0)
10.16
9
8
7 25-0.3×0.6
2.7
b
3.5
14
15
16
17
18
19
20
21
22
23
24
0.5
b
0.5
a
(4.67)
13
12
11
10
40.08
42.65
P P P P P P P P P P 10.16
Outer shape of product
t=0.3
(4.67)
2.54
5.08
5.08
3.0
7.0max.
4.52
44.9
+Vout
NC
NC
NC
RC
NC
NC
–Vin
–Vin
–Vin
No.10
No.11
No.12
No.13
No.14
No.15
No.16
No.17
No.18
+Vin
+Vin
+Vin
NC
NC
+Vout
+Vout
+Vout
+Vout
No.19
No.20
No.21
No.22
No.23
No.24
No.25
Derating Curve
Output power (%)
100
Natural air cooling
80
a
b
60
40
20
a:0.5m/s(100LFM)
b:1m/s(200LFM)
0
-40 -20
0
20
40
60
80 100
Ambient temperature (°
C)
Output power derating by ambient temperature
(common specification)
・All specifications are subject to change without notice.
–Vout
–Vout
–Vout
–Vout
–Vout
–Vout
NC
21
CC-E
CC-E Instruction Manual
1. Control functions/Protection functions/Connections
1. Remote On/Off terminal (RC)
1.5-10W type
1-2. O
utput voltage adjusting terminal (TRM) (1.5-10W type)
Output voltage can be set to the values shown in the figure
Open collector is recommended as the connection system.
below by connecting the TRM terminal to the -Vout termi-
Consult us for use with other systems.
nal.
Use a transistor with "VCE: Vin or over" and "Ic: 1mA or
over".
When not using this function (always on), set the TRM terminal to open.
Output is switched off by setting the RC terminal open, and
Note that when the output voltage is set high by this func-
switched on by setting the RC terminal to LOW (0-0.4V).
tion, derating of output current is necessary according to
the maximum power.
+Vout
DIP/SMDmodels
Load
RC
–Vin
–Vout
When not using this function (always on), short-circuit between RC terminal and -Vin terminal.
+Vin
+Vout
RC
+Vin
3.6V
6V
15V
+Vout
Load
TRM
TRM
–Vout
+Vin
–Vin
+12V
+Vout
and switched off by setting the RC terminal to HIGH (con-
TRM
necting to Vin terminal).
–Vout
+Vout
Load
RC
–Vout
When not using this function (always on), set the RC termi-
+Vin
Load
–Vout
–12V
SIPmodels
Model name
CC3–xx03SS–E
CC3–xx05SS–E
CC3–xx12SS–E
CC3–xx12DS–E
Model name
3.3V
5V
12V
±12V
+15V
+Vout
TRM
Load
COM
–Vin
nal to open.
Load
COM
–Vin
Load
–Vout
–15V
Connection to -Vout
3.67V
6V
15V
±15V
Fig.
3
3
3
4
Load
+Vin
–Vin
TRM
+Vout
+Vin
–Vin
TRM
–Vout
3.67V, 6V, 15V
Load
Load
–12V
+15V
Load
–15V
+Vin
–Vin
TRM
–Vout
COM
COM
Load
+Vout
Fig.4
+12V
・All specifications are subject to change without notice.
Load
3.3V, 5V, 12V
+Vin
–Vout
+Vout
–Vin
TRM
RC
–Vout
+Vout
–Vout
+Vin
+Vout
Fig.3
Load
When not
using this
function
(always on)
+Vin
Fig.2
Output is switched on by setting the RC terminal to open,
–Vin
3.3V
5V
12V
+Vout
–Vout
15/25W type
RC
control
signal
Fig.
1
1
1
2
Fig.1
–Vin
+Vin
Connection to -Vout
3.6V
6V
15V
±15V
Load
–Vin
Open
3.3V
5V
12V
±12V
To be replaced with 1R5(1.5W), 3(3W), 6(6W), or 10(10W) for actual model names.
Load
When not
using this
function
(always on)
Model name
CC –xx03Sx–E
CC –xx05Sx–E
CC –xx12Sx–E
CC –xx12Dx–E
–Vin
RC
control
signal
+Vin
22
CC-E
For ±the 12V output model, output voltage can be set to
Adding a resistance Rb between TRM terminal and
24V single output by making the COM terminal and TRM
+Vout terminal, to set the output voltage low
terminal open. And output voltage can be set to 30V single
*5 Vout = 3.3 - 15.53/(39.6+Rb) [Rb ≧ 62]
output by making the COM terminal open and connecting
*6 Vout = 5.01 - 52.55/(31.8+Rb) [Rb ≧ 160]
the TRM terminal to the -Vout terminal.
*7 Vout = 12.01 - 431.1/(57+Rb) [Rb ≧ 620]
*8 Vout = 12.02 - 968.5/(103+Rb) [Rb ≧ 1500]
models
Model name
Calculating connected resistance Ra, Rb (kΩ) from set out-
COM terminal TRM terminal
Single output Fig.
Open
Open
Open
Connection to -Vout
put voltage Vout (V)
* To be replaced with 1R5(1.5W), 3(3W), 6(6W), or 10(10W) for actual model names.
Fig.5
+Vout
24V
+Vout
30V
TRM
Load
COM
–Vin
+Vin
Load
TRM
COM
–Vin
–Vout
–Vout
+Vin
TRM
–Vin
–Vout
COM
+Vout
+Vin
–Vin
TRM
–Vout
*6 Rb = 52.55/(5.01-Vout) - 31.8
*7 Rb = 431.1/(12.01-Vout) - 57
Fig.9
Fig.10
+Vout
Output voltage can be varied in the range shown in the figure below by connecting a resistance (Ra, Rb) between the
TRM terminal and the -Vout terminal or between the TRM
terminal and +Vout terminal.
Note that when the output voltage is set high, derating
of output current is necessary according to the maximum
power.
models
Connection between
Fig.
+Vout and Rb
to
to
to
to
* To be replaced with 1R5(1.5W), 3(3W), 6(6W), or 10(10W) for actual model names.
Calculating output voltage Vout (V) from connected resistance Ra, Rb (kΩ)
Adding a resistance Ra between TRM terminal and -Vout
terminal, to set the output voltage high
TRM
–Vout
Fig.11
Ra
*1, *2, *3
TRM
Fig.12
Load
Ra
*4
Rb
3.15〜3.3V
4.75〜5V
11.4〜12V
–Vout
Load
COM
–Vout
TRM
+12〜+15V
+Vout
*5, *6, *7
+Vout
Load
30V
1-3. Output voltage adjusting function (adding external resistance)
(1.5-10W type)
3.3〜3.6V
5〜6V
12〜15V
Load
Load
24V
Connection between
Fig.
-Vout and Ra
to
to
to
to
*5 Rb = 15.53/(3.3-Vout) - 39.6
*8 Rb = 968.5/(12.02-Vout) - 103
Fig.8
COM
+Vout
*4 Ra = 53.55/(Vout-12.02) - 18
terminal, to set the output voltage low
COM terminal TRM terminal
Single output Fig.
Open
Open
Open
Connection to -Vout
Fig.7
Model name
*2 Ra = 17.64/(Vout-5.01) - 17.8
*3 Ra = 50.53/(Vout-12.01) - 16.9
Adding a resistance Rb between TRM terminal and +Vout
models
Model name
Load
terminal, to set the output voltage high
*1 Ra = 9.59/(Vout-3.3) - 32
Fig.6
+Vin
Adding a resistance Ra between TRM terminal and -Vout
–12〜–15V
+Vout
TRM
*8
Rb
COM
–Vout
+11.4〜+12V
Load
Load
–11.4〜–12V
models
Model name
Connection between
Fig.
-Vout and Ra
to
to
to
to
Connection between
Fig.
+Vout and Rb
to
to
to
to
Calculating output voltage Vout (V) from connected resistance Ra, Rb (kΩ)
Adding a resistance Ra between TRM terminal and -Vout
terminal, to set the output voltage high
*1 Vout = 3.3 + 1.04/(2.83+Ra)
* To be
3(3W), 6(6W), or 10(10W) for actual model names.
*2replaced
Vout with
= 51R5(1.5W),
+ 12.75/(12.69+Ra)
*3 Vout = 12 + 48.4/(16.18+Ra)
*4 Vout = 12 + 54.7/(18+Ra)
*1 Vout = 3.3 + 9.59/(32+Ra)
*2 Vout = 5.01 + 17.64/(17.8+Ra)
Adding a resistance Rb between TRM terminal and
*3 Vout = 12.01 + 50.53/(16.9+Ra)
+Vout terminal, to set the output voltage low
*4 Vout = 12.02 + 53.55/(18+Ra)
*5 Vout = 3.3 - 1.69/(3.66+Rb) [Rb ≧ 7.6]
*6 Vout = 5 - 12.78/(17.79+Rb) [Rb ≧ 33.3]
*7 Vout = 12 - 184.1/(35.54+Rb) [Rb ≧ 271.3]
*8 Vout = 12 -470.3/(61.75+Rb) [Rb ≧ 722.1]
・All specifications are subject to change without notice.
23
CC-E
Calculating connected resistance Ra, Rb (kΩ) from set output voltage Vout (V)
1-5. Over voltage protection
Adding a resistance Ra between TRM terminal and -Vout
An over voltage protection function is not incorporated in
terminal, to set the output voltage high
the model. Be careful if an external voltage over the nomi-
*1 Ra = 1.04/(Vout-3.3) - 2.83
nal voltage is applied, damage may be caused.
*2 Ra = 12.75/(Vout-5) - 12.69
*3 Ra = 48.4/(Vout-12) - 16.18
*4 Ra = 54.7/(Vout-12) - 18
1-6. Low input voltage protection
This series is equipped with the low input voltage protec-
Adding a resistance Rb between TRM terminal and
tion in order to prevent malfunction due to low input volt-
+Vout terminal, to set the output voltage low
*5 Rb = 1.69/(3.3-Vout) - 3.66
age. The converter stops operation if the input voltage
become lower than the set voltage. The set ranges are
*6 Rb = 12.78/(5-Vout) - 17.79
shown in the table below.
*7 Rb = 184.1/(12-Vout) - 35.54
Model name
*8 Rb = 470.3/(12-Vout) - 61.75
Load
*5, *6, *7
3.15〜3.3V、4.75〜5V、11.4〜12V
TRM
–Vout
COM
+Vout
TRM
–Vout
and between terminal and case, is AC500V.
Rb
Ra
*4
Load Load
+12〜+15V
–12〜–15V
1-7. Insulation withstand voltage
The insulation withstand voltage between input and output,
Fig.16
COM
+Vout
TRM
Rb
Ra *1, *2, *3
Load
3.3〜3.67V、5〜6V、12〜15V
Fig.15
–Vout
TRM
+Vout
Fig.14
–Vout
+Vout
Fig.13
Input voltage range
Voltage range set for protection circuit
to
to
to
to
to
to
to
to
to
to
to
to
To be replaced with 1R5(1.5W), 3(3W), 6(6W), or 10(10W) for actual model names.
Load
Load
+11.4〜+12V
*8
–11.4〜–12V
1-4. Over current protection
1.5-10W type
1-8. Series/Parallel connections
Series connection
Serial connection is applicable by wiring as shown in the
figure below (left). If output voltage is not generated by this
connection, connect a Schottky diode in which the forward
voltage is possibly low.
An over current protection circuit is incorporated in the
Also note that the Schottky diode should have a reverse
model, and if over current occurs, the output voltage is
voltage that is twice or over the value of the voltage be-
lowered. By removing the over current and shorted condi-
tween +Vout and -Vout.
tions, the output voltage automatically resumes. Note that
And the output current should be the same or lower than
if the over current status continues for 30 seconds or over,
the nominal current value, whichever is smaller in the con-
the internal elements of the converter may be deteriorated
verters.
or damaged. The current value, from which it is judged as
an over current, is not to be lower than the nominal current
value. If the output voltage does not resume even after re-
15/25W type
+Vin
+Vout
–Vin
–Vout
–Vin
–Vout
+Vin
+Vout
+Vin
+Vout
–Vin
–Vout
–Vin
–Vout
An over current protection circuit is incorporated in the
model, and if over current occurs, the output voltage is
lowered and the converter is stopped and latched. The
Parallel connection
output voltage does not automatically resume even after
Parallel connection is not applicable.
removing the over current and shorted conditions.
To resume output voltage, restart input or reset remote on/
off.
The current value, from which it is judged as an over current, is not to be lower than the nominal current value.
・All specifications are subject to change without notice.
Load
the power or remote control once, and then restart it.
+Vout
Load
moving the over current conditions and any causes, turn off
+Vin
24
CC-E
2. Noise reduction methods
2-1. Ripple noise measurement method
2-3. Output ripple & noise
The measured value of the converter noise may differ de-
To reduce Output ripple & noise, connect a capacitor to
pending on the measurement method. Measurement should
the output of the converter. In addition, reduction can be
be conducted in a position close to the output terminal.
enhanced if a π type filter is incorporated as shown in the
When connecting a prove, do not allow a loop to be config-
figure below. In this case, use of a coil with around 100µH
ured in order not to pick up flux.
is recommended.
As well, note that the spike voltage greatly differs depending on the ripple voltmeter and frequency band of the oscil-
+Vout
–Vin
–Vout
Our noise measurement is conducted by the wiring shown
in the figure below and in the frequency band of 50MHz.
10mm
+Vin
Iin
V
V
–Vout
–Vin
A
A
lout
+Vout
Vout
0.1µF
50Ω coaxial cable
1.5m
–Vout
Ripple
voltmeter
50MHz
verter is long, connect the capacitor as close as possible
to the load.
To reduce output spike noise, connect a ceramic capacitor
with around 1µF to the output of the converter.
+Vin
+Vout
1MF
2-2. Input ripple noise
–Vin
Load
Oscilloscope
or
50MHz
End-point: 50Ω+0.1µF
–Vin
When the distance to the load from the output of the conLoad
Vin
20mm
+Vout
Load
loscope.
+Vin
Load
+Vin
–Vout
This series is equipped with a built-in capacitor for input.
Therefore, this series can operate without an external
capacitor, input ripple noise and input return noise can be
2-4. C
apacity of external capacitor connected to output
reduced.
In addition, it is more effective if a π type filter is installed
Note that if a capacitor with capacity over the value shown
in the table below is connected to the output, or several
as shown in the figure below.
capacitors with low impedance are connected in parallel,
capacitor connected to input. However, by connecting a
operation of the converter may become unstable.
+Vin
+Vout
+Vin
+Vout
Load
Load
–Vin
–Vout
–Vin
–Vout
When the distance to the input of the converter from the
input power supply is long, attach a capacitor as close as
possible to the input terminal.
+Vout
–Vin
–Vout
Load
+Vin
When the distance to the input of the converter from the
input power supply is long, the impedance of the input line
can become high, causing high spike noise.
In this case, it is recommended to connect a capacitor as
close as possible to the input of the DC-DC converter.
・All specifications are subject to change without notice.
Model name
Electrostatic capacitance (µF) max.
25
CC-E
2-5. Common mode noise
2-6. Radiation noise
For products other than with 10W, capacitors are not con-
Radiation noise of the converter can be reduced by con-
nected between the primary GND and the secondary GND.
necting the case terminal to the input or output GND ter-
To reduce common mode noise, connect a capacitor with
minal. The effectiveness varies depending on the device.
around 1000pF between the primary GND and the second-
Check it on the actual device.
ary GND, as shown in the figure below.
Regarding wiring, use GND line and solid pattern for the
In this case, note that if the capacitor that is connected is
bottom of the converter as much as possible.
too large, coupling capacitance between input and output
- SMD models are not equipped with case terminals.
becomes large.
Also be careful about the withstand voltage of the capacitor
(500V or over is desirable with consideration of the insulation withstand voltage).
+Vout
–Vin
–Vout
Load
+Vin
For products with 10W, capacitors with 1000pF are internally connected between primary and secondary.
3. Soldering conditions/Cleaning conditions
3-1. Soldering conditions
Board cleaning after soldering is not recommended. How-
●Soldering conditions
DIP models / SIP models
Observe the following conditions in soldering board.
Solder dip
Soldering copper
260°C, 10s max.
380°C, 3s max.
SMD models
Lead-free soldering / High-temperature reflow process
Surface temperature of parts
3-2. Cleaning method
30p20s
ever, the cleaning fluids and conditions shown in the table
below have been tested and proved to have no problem.
These fluids and conditions can be used. Consult us for
using cleaning fluids other than those shown below.
Cleaning fluids and test conditions
Cleanthrough 750H
(1) Cleaning (shaking) at 60°
C for 4 minutes
(2) Rinsing (shaking in water) at 60°
C for 4 minutes
245˚C max.
(3) Rinsing (shaking in water) at ordinary temperature -
225˚C min.
40°
C for 4 minutes
180˚C
(4) Drying at 70°
C for 6 minutes
150˚C
Pine alpha ST100S
(1) Cleaning (shaking) at 60°
C for 5 minutes
1 to 3˚C/s
40 to 100s
1 to 4˚C/s 1 to 5˚C/s
(2) Rinsing (shaking in water) at 30°
C for 3 minutes
(3) Drying at 70°
C for 6 minutes
Terpene Cleaner EC-7R
(1) Cleaning (shaking) at 60°
C for 5 minutes
(2) Rinsing (shaking in IPA) at 30°
C for 10 minutes
(3) Drying at 70°
C for 6 minutes
Isopropyl alcohol
(1) Ultrasonic waves at 60°
C for 1 minute
(2) Cool bath cleaning R.T. for 1 minute
(3) Vapor cleaning at 83°
C for 1 minutes
Asahiklin AK-225AES
(1) Ultrasonic waves at 50°
C for 2 minutes
(2) Cool bath cleaning R.T. for 2 minutes
・All specifications are subject to change without notice.
Similar pages