TDK CC3-2405SF-E Ultra compact, 1.5w to 25w single and dual dc-dc converter Datasheet

CC-E Series
Ultra Compact, 1.5W to 25W Single and Dual DC-DC Converters
Features
u Compact Footprint / Low Profile
u Through Hole or SMT Versions
u 5V, 12V, 24V & 48V Inputs
u 3.3 to 30V1 Single, ±12 to 15V Dual Outputs
u Output Voltage Adjustment
u Input - Output Isolation
u RoHS Compliant
u 5 Year Warranty
u Self contained
u Multiple Input Voltage configurations
u Open frame (no potting)
Key Market Segments & Applications
Specifications
Model
V
3.3V
5V
12/15V
±12/15 (24/30)1
V
5V: 4.5-9.0V, 12V: 9-18V, 24V: 18-36V, 48V: 36-76V
%
71 to 90% model dependant
%
1.5-10W: ±3%, 15-25W: ±5%
±5%
V
3.15-3.6V (5)
4.75-6.0V (5)
11.4-15V
22.8 - 30V
mV
20 (40 CC15; 30 CC25)
40
80
mV
40 (120 CC15; 200 CC25)
100
6002
%
<± 0.02%/°C
No preload required
mV
40/120
30/120
Output current limiting with automatic recovery, shutdown CC15, 25 type
No
- CC1R5, 3, 6, & 10: RC terminal open, output is OFF; RC terminal to -Vin (0-0.4V), output is ON
CC15 & CC25: RC terminal open, output is ON; RC terminal to +Vin, output is OFF
Operating Temp.- Convection
°C
-40 to 85°C, derates linearly to 40% load from 50°C to 85°C
Operating Temp.- Forced Air
°C
-40°C to 85°C with 1m/s air full load
Storage Temperature
°C
-40°C to 85°C
Humidity (non Condensing)
95% RH max.(maximum wet-bulb temperature: 38°C)
Isolation Voltage
500VAC 1 min. Input to output, input to case, output to case
Isolation Resistance
Input to output, input to case, output to case: 50M ohm min. (500VDC)
Shock
m/s2
980m/s2 (100G) 6ms (6 directions, each 3 times)
Vibration (non Operating)
10 to 55Hz (sweep for 15min) 1.52mm constant, 3 directions X, Y, Z each 2 hours
Safety Agency Approvals
UL60950-1, CSA60950-1, EN60950-1, CE Mark
Weight
g
CC1R5: 3.2, CC3: 4.5, CC6: 5.8, CC10:10.0, CC15: 12.5, CC25: 20.0
Size (L x W x H)
in CC1R5: 0.650 x 0.654 x 0.335; CC3: 0.900 x 0.654 x 0.335; CC6: 0.900 x 0.831 x 0.335
(DIP Through Hole and SMD package)
CC10: 1.400 x 0.890 x 0.335; CC15: 1.500 x 1.264 x 0.295; CC25: 1.701 x 1.768 x 0.295
(SIP Through Hole only)
CC3 (SIP): 1.09 x 0.362 x 0.705
Warranty
5 years
Nominal Output Voltage
DC Input
Efficiency
Output Voltage Tolerance
Output Adjustment (via trim pin)
Line Regulation
Load Regulation
Temperature Coefficient
Preload
Output Ripple (typ./max.BW 50MHz)
Overcurrent Protection
Overvoltage Protection
Remote On/ Off
1. For 24V/30V output - connnect across +Vout & -Vout and
leave “common out” pin not connected
2. Based upon equal load current from both outputs
1-800-526-2324 • www.us.tdk-lambda.com/lp/
3. For 15V output connect trim to -Vout
4. See Installation Manual for full specs, test methods of
parameters & application notes
5. Not available on CC15 and CC25 models
13
CC-E Series
Model Selector
Output
Output
Current (A) Power (W)
Single Outputs
3.3
3.3
3.3
3.3
3.3
3.3
5
5
5
5
5
5
5
12(15)
12(15)
12(15)
12(15)
12(15)
Dual Outputs
±12 (15)3
±12 (15)3
±12 (15)3
±12 (15)3
±12 (15)3
5V Input
12V Input
24V Input
48V Input
0.4
0.8
1.2
2.5
4.5
7.5
0.3
0.6
1.0
1.2
2.0
3.0
5.0
0.125(0.1)
0.25(0.2)
0.5(0.4)
0.8(0.64)
1.0(0.8)
1.5
3
6
10
15
25
1.5
3
5
6
10
15
25
1.5
3
6
10
10
CC1R5-0503SF-E
CC3-0503SF-E
CC6-0503SF-E
CC10-0503SF-E
CC1R5-0505SF-E
CC3-0505SF-E
CC6-0505SF-E
CC10-0505SF-E
CC1R5-0512SF-E
CC3-0512SF-E
CC6-0512SF-E
CC10-0512SF-E
-
CC1R5-1203SF-E
CC3-1203SF-E
CC6-1203SF-E
CC10-1203SF-E
CC1R5-1205SF-E
CC3-1205SF-E
CC6-1205SF-E
CC10-1205SF-E
CC1R5-1212SF-E
CC3-1212SF-E
CC6-1212SF-E
CC10-1212SF-E
CC1R5-2403SF-E
CC3-2403SF-E
CC6-2403SF-E
CC10-2403SF-E
CC15-2403SF-E
CC25-2403SF-E
CC1R5-2405SF-E
CC3-2405SF-E
CC6-2405SF-E
CC10-2405SF-E
CC15-2405SF-E
CC25-2405SF-E
CC1R5-2412SF-E
CC3-2412SF-E
CC6-2412SF-E
CC10-2412SF-E
CC1R5-4803SF-E
CC3-4803SF-E
CC6-4803SF-E
CC10-4803SF-E
CC1R5-4805SF-E
CC3-4805SF-E
CC6-4805SF-E
CC10-4805SF-E
CC1R5-4812SF-E
CC3-4812SF-E
CC6-4812SF-E
CC10-4812SF-E
0.06(0.05)
0.125(0.1)
0.25(0.2)
0.4(0.32)
0.45(0.36)
1.5
3
6
10
10
CC1R5-0512DF-E
CC3-0512DF-E
CC6-0512DF-E
CC10-0512DF-E
-
CC1R5-1212DF-E
CC3-1212DF-E
CC6-1212DF-E
CC10-1212DF-E
CC1R5-2412DF-E
CC3-2412DF-E
CC6-2412DF-E
CC10-2412DF-E
CC1R5-4812DF-E
CC3-4812DF-E
CC6-4812DF-E
CC10-4812DF-E
Outline Drawing
Outline Drawing
CC10- F-E (DIP TYPE)
8.4
(8.5max.)
CC10- R-E (SMD TYPE)
4.0
8.5
(8.8max.)
22.6±0.2
22.6±0.2
4.0
Output
Voltage (V)
t=0.3
3.5
t=0.3
35.56
6
7-0.3⋅ 0.6
1
10
9
7
Options
Version
F-E
R-E
S-E
3
4
2
5
7-0.3⋅ 0.6
1
6
7
Pinout (CC1R5, 3, 6, and 10)
Description
Through hole mounting (DIP pkg)
Surface mount (DIP pkg)
Through hole mounting (SIP pkg - CC3)
Other Industrial Products
PX
PAQ,
PAH, PAF
5.08
(3.68)
1.0
1.8
5.08 5.08 5.08
(3.68) 10.16
5
(3.68) 10.16
4
2
1.8
No.10, 11 2.7
11
Coplanarity 0.1max.
38.86
2.7
0.5
8
5.08
5.08 5.08 5.08
5.08
(3.68)
3
No.8, 9
3.5
25.4
5.08
0.5
25.4
35.56
10 - 40W 12, 24, 48V DC-DC converters
50 -700W quarter, half & full bricks
Pin
1
2
3
4
5
6
7
Single
Dual
+Vin
+Vin
RC
RC
-Vin
-Vin
NC
-Vout
-Vout
Common out
TRM
TRM
+Vout
+Vout
For CC15 and 25 see Installation Manual online
For Additional Information, please visit
us.tdk-lambda.com/lp/products/cc-series.htm
1-800-526-2324 • www.us.tdk-lambda.com/lp/
14
Revision A7: Nov 2011
Similar pages