Fairchild CD4022BC Decade counter/divider with 10 decoded outputs divide-by-8 counter/divider with 8 decoded output Datasheet

Revised January 2004
CD4017BC • CD4022BC
Decade Counter/Divider with 10 Decoded Outputs •
Divide-by-8 Counter/Divider with 8 Decoded Outputs
General Description
Features
The CD4017BC is a 5-stage divide-by-10 Johnson counter
with 10 decoded outputs and a carry out bit.
■ Wide supply voltage range: 3.0V to 15V
The CD4022BC is a 4-stage divide-by-8 Johnson counter
with 8 decoded outputs and a carry-out bit.
■ Low power Fan out of 2 driving 74L
These counters are cleared to their zero count by a logical
“1” on their reset line. These counters are advanced on the
positive edge of the clock signal when the clock enable signal is in the logical “0” state.
The configuration of the CD4017BC and CD4022BC permits medium speed operation and assures a hazard free
counting sequence. The 10/8 decoded outputs are normally in the logical “0” state and go to the logical “1” state
only at their respective time slot. Each decoded output
remains high for 1 full clock cycle. The carry-out signal
completes a full cycle for every 10/8 clock input cycles and
is used as a ripple carry signal to any succeeding stages.
■ High noise immunity: 0.45 VDD (typ.)
TTL compatibility: or 1 driving 74LS
■ Medium speed operation: 5.0 MHz (typ.)
with 10V VDD
■ Low power:
10 µW (typ.)
■ Fully static operation
Applications
• Automotive
• Instrumentation
• Medical electronics
• Alarm systems
• Industrial electronics
• Remote metering
Ordering Code:
Order Number
CD4017BCM
Package Number
M16A
Package Description
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
CD4017BCN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
CD4022BCM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
CD4022BCN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagrams
CD4017B
CD4022B
Top View
Top View
© 2004 Fairchild Semiconductor Corporation
DS005950
www.fairchildsemi.com
CD4017BC • CD4022BC Decade Counter/Divider with 10 Decoded Outputs • Divide-by-8 Counter/Divider with 8
Decoded Outputs
October 1987
CD4017BC • CD4022BC
Logic Diagrams
CD4017B
Terminal No. 8 = GND
Terminal No. 16 = VDD
CD4022B
Terminal No. 16 = VDD
Terminal No. 8 = GND
www.fairchildsemi.com
2
Recommended Operating
Conditions (Note 2)
(Note 2)
DC Supply Voltage (VDD)
Input Voltage (VIN)
−0.5 VDC to +18 VDC
Input Voltage (VIN)
−65°C to +150°C
Storage Temperature (TS)
+3 VDC to +15 VDC
DC Supply Voltage (VDD)
−0.5 VDC to VDD +0.5 VDC
0 to VDD VDC
Operating Temperature Range (TA)
−55°C to +125°C
Power Dissipation (PD)
Dual-In-Line
700 mW
Small Outline
500 mW
Note 1: “Absolute Maximum Ratings” are those values beyond which the
safety of the device cannot be guaranteed, they are not meant to imply that
the devices should be operated at these limits. The table of “Recommended Operating Conditions” and “Electrical Characteristics” provides
conditions for actual device operation.
Lead Temperature (TL)
260°C
(Soldering, 10 seconds)
DC Electrical Characteristics
Symbol
IDD
VOL
VOH
VIL
Parameter
IOL
IOH
IIN
(Note 2)
−55°C
Conditions
Min
+25°
Max
Min
+125°C
Typ
Max
Min
Max
Quiescent Device
VDD = 5V
5
0.3
5
150
Current
VDD = 10V
10
0.5
10
300
VDD = 15V
20
1.0
20
600
LOW Level
|IO| < 1.0 µA
Output Voltage
VDD = 5V
0.05
0
0.05
0.05
VDD = 10V
0.05
0
0.05
0.05
VDD = 15V
0.05
0
0.05
0.05
HIGH Level
|IO| < 1.0 µA
Output Voltage
VDD = 5V
4.95
4.95
5
VDD = 10V
9.95
9.95
10
9.95
VDD = 15V
14.95
14.95
15
14.95
LOW Level
Input Voltage
VIH
Note 2: VSS = 0V unless otherwise specified.
µA
V
4.95
V
|IO| < 1.0 µA
VDD = 5V, VO = 0.5V or 4.5V
1.5
1.5
1.5
VDD = 10V, VO = 1.0V or 9.0V
3.0
3.0
3.0
VDD = 15V, VO = 1.5V or 13.5V
4.0
4.0
4.0
HIGH Level
|IO| < 1.0 µA
Input Voltage
VDD = 5V, VO = 0.5V or 4.5V
3.5
3.5
VDD = 10V, VO = 1.0V or 9.0V
7.0
7.0
7.0
VDD = 15V, VO = 1.5V or 13.5V
11.0
11.0
11.0
LOW Level Output
VDD = 5V, VO = 0.4V
0.64
0.51
0.88
Current (Note 3)
VDD = 10V, VO = 0.5V
1.6
1.3
2.25
0.9
VDD = 15V, VO = 1.5V
4.2
3.4
8.8
2.4
HIGH Level Output
VDD = 5V, VO = 4.6V
−0.25
−0.2
−0.36
−0.14
Current (Note 3)
VDD = 10V, VO = 9.5V
−0.62
−0.5
−0.9
−0.35
VDD = 15V, VO = 13.5V
−1.8
−1.5
−3.5
−1.1
Input Current
Units
V
3.5
V
0.36
mA
mA
VDD = 15V, VIN = 0V
−0.1
−10−5
−0.1
−1.0
VDD = 15V, VIN = 15V
0.1
10−5
0.1
1.0
µA
Note 3: IOL and IOH are tested one output at a time.
3
www.fairchildsemi.com
CD4017BC • CD4022BC
Absolute Maximum Ratings(Note 1)
CD4017BC • CD4022BC
AC Electrical Characteristics
(Note 4)
TA= 25°C, CL= 50 pF, RL= 200k, trCL and tfCL= 20 ns, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Units
CLOCK OPERATION
tPHL, tPLH Propagation Delay Time Carry Out Line
VDD = 5V
415
800
VDD = 10V
160
320
VDD = 15V
130
250
VDD = 5V
Carry Out Line
VDD = 10V
CL = 15 pF
VDD = 15V
Decode Out Lines
240
480
85
170
70
140
VDD = 5V
500
1000
VDD = 10V
200
400
VDD = 15V
160
320
ns
ns
ns
tTLH, tTHL Transition Time Carry Out and Decode Out Lines
tTLH
tTHL
fCL
tWL, tWH
trCL, tfCL
tSU
CIN
Maximum Clock Frequency
Minimum Clock Pulse Width
Clock Rise and Fall Time
Minimum Clock Inhibit Data Setup Time
VDD = 5V
200
360
VDD = 10V
100
180
VDD = 15V
80
130
VDD = 5V
100
200
VDD = 10V
50
100
VDD = 15V
40
80
VDD = 5V
Measured with
1.0
VDD = 10V
Respect to Carry
2.5
5
VDD = 15V
Output Line
3.0
6
ns
ns
2
MHz
VDD = 5V
125
250
VDD = 10V
45
90
VDD = 15V
35
70
VDD = 5V
20
VDD = 10V
15
VDD = 15V
5
VDD = 5V
120
240
VDD = 10V
40
80
VDD = 15V
32
65
5
7.5
Average Input Capacitance
ns
µs
ns
pF
Note 4: AC Parameters are guaranteed by DC correlated testing.
AC Electrical Characteristics
(Note 4)
TA = 25°C, CL = 50 pF, RL = 200k, trCL and tfCL = 20 ns, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Units
RESET OPERATION
tPHL, tPLH
Propagation Delay Time
Carry Out Line
Carry Out Line
VDD = 5V
415
800
VDD = 10V
160
320
VDD = 15V
130
250
240
480
85
170
70
140
VDD = 5V
VDD = 10V
CL = 15 pF
VDD = 15V
VDD = 5V
500
1000
VDD = 10V
200
400
VDD = 15V
160
320
Minimum Reset
VDD = 5V
200
400
Pulse Width
VDD = 10V
70
140
VDD = 15V
55
110
Minimum Reset
VDD = 5V
75
150
Removal Time
VDD = 10V
30
60
VDD = 15V
25
50
Decode Out Lines
tW
tREM
www.fairchildsemi.com
4
ns
ns
ns
ns
ns
CD4017BC • CD4022BC
Timing Diagrams
CD4017B
CD4022B
5
www.fairchildsemi.com
CD4017BC • CD4022BC
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M16A
www.fairchildsemi.com
6
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N16E
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com
CD4017BC • CD4022BC Decade Counter/Divider with 10 Decoded Outputs • Divide-by-8 Counter/Divider with 8
Decoded Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Similar pages