NSC CD4022BCN Decade counter/divider with 10 decoded outputs, divide-by-8 counter/divider with 8 decoded output Datasheet

CD4017BM/CD4017BC Decade Counter/Divider
with 10 Decoded Outputs
CD4022BM/CD4022BC Divide-by-8 Counter/Divider
with 8 Decoded Outputs
General Description
Features
The CD4017BM/CD4017BC is a 5-stage divide-by-10 Johnson counter with 10 decoded outputs and a carry out bit.
The CD4022BM/CD4022BC is a 4-stage divide-by-8 Johnson counter with 8 decoded outputs and a carry-out bit.
These counters are cleared to their zero count by a logical
‘‘1’’ on their reset line. These counters are advanced on the
positive edge of the clock signal when the clock enable signal is in the logical ‘‘0’’ state.
The configuration of the CD4017BM/CD4017BC and
CD4022BM/CD4022BC permits medium speed operation
and assures a hazard free counting sequence. The 10/8
decoded outputs are normally in the logical ‘‘0’’ state and go
to the logical ‘‘1’’ state only at their respective time slot.
Each decoded output remains high for 1 full clock cycle.
The carry-out signal completes a full cycle for every 10/8
clock input cycles and is used as a ripple carry signal to any
succeeding stages.
Y
Y
Y
Y
Y
Y
Wide supply voltage range
High noise immunity
Low power
TTL compatibility
Medium speed operation
Low power
Fully static operation
3.0V to 15V
0.45 VDD (typ.)
Fan out of 2 driving 74L
or 1 driving 74LS
5.0 MHz (typ.)
with 10V VDD
10 mW (typ.)
Applications
Y
Y
Y
Y
Y
Y
Automotive
Instrumentation
Medical electronics
Alarm systems
Industrial electronics
Remote metering
Connection Diagrams
CD4022B
Dual-In-Line Package
CD4017B
Dual-In-Line Package
TL/F/5950 – 1
Top View
TL/F/5950 – 2
Top View
Order Number CD4017B or CD4022B
C1995 National Semiconductor Corporation
TL/F/5950
RRD-B30M105/Printed in U. S. A.
CD4017BM/CD4017BC Decade Counter/Divider with 10 Decoded Outputs
CD4022BM/CD4022BC Divide-by-8 Counter/Divider with 8 Decoded Outputs
March 1988
Absolute Maximum Ratings (Notes 1 & 2)
Recommended Operating
Conditions (Note 2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
DC Supply Voltage (VDD)
DC Supply Voltage (VDD)
Input Voltage (VIN)
b 0.5 VDC to a 18 VDC
b 0.5 VDC to VDD a 0.5 VDC
Input Voltage (VIN)
Storage Temperature (TS)
Power Dissipation (PD)
Dual-In-Line
Small Outline
Lead Temperature (TL)
(Soldering, 10 seconds)
a 3 VDC to a 15 VDC
0 to VDD VDC
Operating Temperature Range (TA)
CD4017BM, CD4022BM
CD4017BC, CD4022BC
b 65§ C to a 150§ C
b 55§ C to a 125§ C
b 40§ C to a 85§ C
700 mW
500 mW
260§ C
DC Electrical Characteristics CD4017BM, CD4022BM (Note 2)
Symbol
Parameter
b 55§ C
Conditions
Min
a 25§
Max
Min
5
10
20
0.3
0.5
1.0
5
10
20
150
300
600
mA
mA
mA
0.05
0.05
0.05
0
0
0
0.05
0.05
0.05
0.05
0.05
0.05
V
V
V
Quiescent Device
Current
VDD e 5V, VIN e VDD or VSS
VDD e 10V, VIN e VDD or VSS
VDD e 15V, VIN e VDD or VSS
VOL
Low Level
Output Voltage
lIOl k 1.0 mA
VDD e 5V
VDD e 10V
VDD e 15V
High Level
Output Voltage
lIOl k 1.0 mA
VDD e 5V
VDD e 10V
VDD e 15V
Low Level
Input Voltage
lIOl k 1.0 mA
VDD e 5V, VO e 0.5V or 4.5V
VDD e 10V, VO e 1.0V or 9.0V
VDD e 15V, VO e 1.5V or 13.5V
High Level
Input Voltage
lIOl k 1.0 mA
VDD e 5V, VO e 0.5V or 4.5V
VDD e 10V, VO e 1.0V or 9.0V
VDD e 15V, VO e 1.5V or 13.5V
3.5
7.0
11.0
3.5
7.0
11.0
IOL
Low Level Output
Current (Note 3)
VDD e 5V, VO e 0.4V
VDD e 10V, VO e 0.5V
VDD e 15V, VO e 1.5V
0.64
1.6
4.2
0.51
1.3
3.4
IOH
High Level Output
Current (Note 3)
VDD e 5V, VO e 4.6V
VDD e 10V, VO e 9.5V
VDD e 15V, VO e 13.5V
b 0.25
b 0.62
b 1.8
b 0.2
b 0.5
b 1.5
IIN
Input Current
VDD e 15V, VIN e 0V
VDD e 15V, VIN e 15V
VIL
VIH
4.95
9.95
14.95
4.95
9.95
14.95
Min
Units
Max
IDD
VOH
a 125§ C
Typ
5
10
15
1.5
3.0
4.0
Max
4.95
9.95
14.95
V
V
V
1.5
3.0
4.0
1.5
3.0
4.0
V
V
V
3.5
7.0
11.0
V
V
V
0.88
2.25
8.8
0.36
0.9
2.4
mA
mA
mA
b 0.36
b 0.9
b 3.5
b 0.14
b 0.35
b 1.1
mA
mA
mA
b 0.1
b 10 b 5
b 0.1
b 1.0
0.1
10b5
0.1
1.0
mA
mA
DC Electrical Characteristics CD4017BC, CD4022BC (Note 2)
Symbol
Parameter
Conditions
b 40§ C
Min
IDD
Quiescent Device
Current
VDD e 5V
VDD e 10V
VDD e 15V
VOL
Low Level
Output Voltage
lIOl k 1.0 mA
VDD e 5V
VDD e 10V
VDD e 15V
High Level
Output Voltage
lIOl k 1.0 mA
VDD e 5V
VDD e 10V
VDD e 15V
VOH
a 25§
Max
a 85§ C
Max
20
40
80
0.5
1.0
5.0
20
40
80
150
300
600
mA
mA
mA
0.05
0.05
0.05
0
0
0
0.05
0.05
0.05
0.05
0.05
0.05
V
V
V
4.95
9.95
14.95
5
10
15
Min
Units
Typ
4.95
9.95
14.95
Min
4.95
9.95
14.95
Max
V
V
V
Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed, they are not meant to imply that the devices
should be operated at these limits. The table of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provides conditions for actual device
operation.
Note 2: VSS e 0V unless otherwise specified.
Note 3: IOL and IOH are tested one output at a time.
2
DC Electrical Characteristics CD4017BC, CD4022BC (Note 2) (Continued)
Symbol
Parameter
b 40§ C
Conditions
Min
Max
a 25§
Min
Low Level
Input Voltage
lIOl k 1.0 mA
VDD e 5V, VO e 0.5V or 4.5V
VDD e 10V, VO e 1.0V or 9.0V
VDD e 15V, VO e 1.5V or 13.5V
High Level
Input Voltage
lIOl k 1.0 mA
VDD e 5V, VO e 0.5V or 4.5V
VDD e 10V, VO e 1.0V or 9.0V
VDD e 15V, VO e 1.5V or 13.5V
3.5
7.0
11.0
3.5
7.0
11.0
IOL
Low Level Output
Current (Note 3)
VDD e 5V, VO e 0.4V
VDD e 10V, VO e 0.5V
VDD e 15V, VO e 1.5V
0.52
1.3
3.6
0.44
1.1
3.0
IOH
High Level Output
Current (Note 3)
VDD e 5V, VO e 4.6V
VDD e 10V, VO e 9.5V
VDD e 15V, VO e 13.5V
b 0.2
b 0.5
b 1.4
b 0.16
b 0.4
b 1.2
IIN
Input Current
VDD e 15V, VIN e 0V
VDD e 15V, VIN e 15V
VIL
VIH
Typ
1.5
3.0
4.0
a 85§ C
Max
Min
1.5
3.0
4.0
Units
Max
1.5
3.0
4.0
V
V
V
3.5
7.0
11.0
V
V
V
0.88
2.25
8.8
0.36
0.9
2.4
mA
mA
mA
b 0.36
b 0.9
b 3.5
b 0.12
b 0.3
b 1.0
mA
mA
mA
b 0.3
b 10 b 5
b 0.3
b 1.0
0.3
10b5
0.3
1.0
mA
mA
Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed, they are not meant to imply that the devices
should be operated at these limits. The table of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provides condtions for actual device
operation.
Note 2: VSS e 0V unless otherwise specified.
Note 3: IOL and IOH are tested one output at a time.
AC Electrical Characteristics*
TA e 25§ C, CL e 50 pF, RL e 200k, trCL and tfCL e 20 ns, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Units
415
160
130
800
320
250
ns
ns
ns
240
85
70
480
170
140
ns
ns
ns
500
200
160
1000
400
320
ns
ns
ns
VDD e 5V
VDD e 10V
VDD e 15V
200
100
80
360
180
130
ns
ns
ns
tTHL
VDD e 5V
VDD e 10V
VDD e 15V
100
50
40
200
100
80
ns
ns
ns
fCL
Maximum Clock Frequency
VDD e 5V
VDD e 10V
VDD e 15V
tWL, tWH
Minimum Clock
Pulse Width
VDD e 5V
VDD e 10V
VDD e 15V
trCL, tfCL
Clock Rise and
Fall Time
VDD e 5V
VDD e 10V
VDD e 15V
tSU
Minimum Clock Inhibit
Data Setup Time
VDD e 5V
VDD e 10V
VDD e 15V
CIN
Average Input Capacitance
CLOCK OPERATION
tPHL, tPLH
Propagation Delay Time
Carry Out Line
Carry Out Line
Decode Out Lines
tTLH, tTHL
Transition Time Carry Out
and Decode Out Lines
tTLH
VDD e 5V
VDD e 10V
VDD e 15V
VDD e 5V
VDD e 10V
VDD e 15V
VDD e 5V
VDD e 10V
VDD e 15V
(
(
3
CL e 15 pF
Measured with
Respect to Carry
Output Line
1.0
2.5
3.0
2
5
6
125
45
35
MHz
MHz
MHz
250
90
70
ns
ns
ns
20
15
5
ms
ms
ms
120
40
32
240
80
65
ns
ns
ns
5
7.5
pF
AC Electrical Characteristics*
TA e 25§ C, CL e 50 pF, RL e 200k, trCL and tfCL e 20 ns, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Units
415
160
130
800
320
250
ns
ns
ns
240
85
70
480
170
140
ns
ns
ns
500
200
160
1000
400
320
ns
ns
ns
RESET OPERATION
tPHL, tPLH
Propagation Delay Time
Carry Out Line
Carry Out Line
VDD e 5V
VDD e 10V
VDD e 15V
VDD e 5V
VDD e 10V
VDD e 15V
(
CL e 15 pF
Decode Out Lines
VDD e 5V
VDD e 10V
VDD e 15V
tW
Minimum Reset
Pulse Width
VDD e 5V
VDD e 10V
VDD e 15V
200
70
55
400
140
110
ns
ns
ns
tREM
Minimum Reset
Removal Time
VDD e 5V
VDD e 10V
VDD e 15V
75
30
25
150
60
50
ns
ns
ns
*AC Parameters are guaranteed by DC correlated testing.
Timing Diagrams
CD4017B
TL/F/5950 – 3
4
Timing Diagrams (Continued)
CD4022B
TL/F/5950 – 4
5
Logic Diagrams
CD4017B
Terminal No. 8 e GND
Terminal No. 16 e VDD
TL/F/5950 – 5
CD4022B
Terminal No. 16 e VDD
Terminal No. 8 e GND
TL/F/5950 – 6
6
Physical Dimensions inches (millimeters)
Ceramic Dual-In-Line Package (J)
Order Number CD4017BMJ, CD4017BCJ, CD4022BMJ, CD4022BCJ
NS Package Number J16A
7
CD4017BM/CD4017BC Decade Counter/Divider with 10 Decoded Outputs
CD4022BM/CD4022BC Divide-by-8 Counter/Divider with 8 Decoded Outputs
Physical Dimensions inches (millimeters) (Continued)
Molded Dual-In-Line Package (N)
Order Number CD4017BMN, CD4017BCN, CD4022BMN, CD4022BCN
NS Package Number N16E
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose
failure to perform, when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
National Semiconductor
Europe
Fax: (a49) 0-180-530 85 86
Email: cnjwge @ tevm2.nsc.com
Deutsch Tel: (a49) 0-180-530 85 85
English Tel: (a49) 0-180-532 78 32
Fran3ais Tel: (a49) 0-180-532 93 58
Italiano Tel: (a49) 0-180-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Similar pages