Murata CFUKF455KC4X-R0 Ceramic discriminators for communications equipment Datasheet

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr)/
Ceramic Discriminators
for Communications
Equipment
Cat.No.P05E-16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
EU RoHS Compliant
s
s
s
All the products in this catalog comply with EU RoHS.
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
CONTENTS
P05E.pdf
Nov.24,2011
1
CERAFILr and "CERAFIL" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
2
Part Numbering
2
Products Guide
4
1
CERAFILr kHz SMD Type SFPKA Series
5
2
CERAFILr kHz SMD Type CFUKG Series
7
3
CERAFILr kHz SMD Type CFUKG_X Series
9
4
CERAFILr kHz SMD Type CFUKF Series
11
5
CERAFILr kHz SMD Type CFWKA Series
13
6
CERAFILr kHz SMD Type CFWKA_Y Series
15
kHz SMD Type CERAFILr Notice
17
7
CERAFILr MHz SMD Type SFECF10M7 Series
21
8
CERAFILr MHz SMD Type SFSCE10M7 Series
23
MHz SMD Type CERAFILr Notice
25
SMD Type CERAFILr Standard Land Pattern Dimensions
31
kHz SMD Type CERAFILr Packaging
32
MHz SMD Type CERAFILr Packaging
34
9
CERAFILr Plastic Case General Use CFULA Series
35
10
CERAFILr Plastic Case General Use CFWLA Series
37
11
CERAFILr Plastic Case Miniaturized Type CFULB Series
39
12
CERAFILr Plastic Case Miniaturized Type CFWLB Series
41
13
CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series
43
14
CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series
45
15
CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series
47
16
CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series
49
Plastic Case Type CERAFILr Minimum Quantity/Notice
51
17
kHz Type Ceramic Discriminators
52
18
MHz Type Ceramic Discriminators
65
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Ceramic Discriminators Notice
70
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
74
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
o Part Numbering
Ceramic Filters (CERAFILr) for IF
(Part Number)
SF
P
KA
455K
SF
E
CF
10M7 DF00
q
w
e
r
-R0
D4A
t
S0
-R0
y
u
qProduct ID
wOscillating/Element
tProduct Specification
Product ID
CF
Ceramic Filters
Oscillating/Element
U
4 Elements Area Expansion mode
W
6 Elements Area Expansion mode
P
4 Elements Area Expansion mode
D4A
Three-digit alphanumerics express pass bandwidth,
center frequency tolerance and design type.
SFE/S/J series are expressed by four-digit alphanumerics.
E 2 Elements Thickness Expansion mode
SF
S
2 Elements Thickness Shear mode
eStructure/Size
Code
Structure/Size
Cp/Kp
Chip Type
Lp
Lead Type
p is "A" or subsequent code, which indicates the size. It varies
depending on vibration mode and number of elements.
Chip type is only applied for SF series.
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is hertz (Hz). If
the unit is "kHz", it is expressed by three figures plus "K." If the
unit is "MHz", a decimal point is expressed by the capital letter
"M."
2
Product Specification
Code
yIndividual Specification
Code
Individual Specification Code
001
Expressed by three-digit alphanumerics.
SFE/S/J series are expressed by two-digit alphanumerics.
With standard type, y is omitted.
uPackaging
Code
Packaging
-B0
Bulk
-R0
Embossed Taping ø=180mm
-R1
Embossed Taping ø=330mm
Embossed taping is applied to chip type.
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Discriminators for IF (kHz)
(Part Number)
CD
B
LB
450K
q
w
e
r
C
X
A
16
t y u i
-B0
o
qProduct ID
yApplication
Product ID
Code
CD
Ceramic Discriminators
Application
A
Standard
L
Application with coil
wOscillating
uElement Type
Code
Oscillating
B
Area Expansion mode
eStructure/Size
Code
Structure/Size
Cp/Kp
Chip Type
Lp
Lead Type
Code
Element Type
X
Low-capacitance
Y
High-capacitance
iIC
p is "A" or subsequent code, which indicates the size. It varies
depending on vibration mode and number of elements.
Code
IC
16
Applicable IC Control code
oPackaging
rNominal Center Frequency
Code
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Capital letter "K" following three figures expresses the unit of
"kHz."
tDetection
Packaging
-B0
Bulk
-R0
Embossed Taping ø=180mm
-R1
Embossed Taping ø=330mm
Embossed taping is applied to chip type. With non-standard products,
one letter indicating "Individual Specification" is added between
"iApplicable IC" and "oPackage Specification code."
Code
Detection
C
Quadrature Detection
Ceramic Discriminators for IF (MHz)
(Part Number)
CD
S
CB 10M7
GF
001 -R0
q
w
e
t
y
r
u
qProduct ID
tProduct Specification
Product ID
CD
Discriminators
Code
Product Specification
GF
Two-digit alphanumerics express
type, center frequency, rank, others
wOscillation
Code
Oscillation
S
Thickness Shear mode
yIC
Code
IC
001
Applicable IC Control Code
eStructure/Size
Code
Structure/Size
Cp
Chip Type
p is expressed "A" or subsequent code, which indicates the size.
rNominal Center Frequency
uPackaging
Code
Packaging
-R0
Embossed Taping ø=180mm
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between "yIC" and "uPackaging."
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M."
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Products Guide
oSMD Type (kHz)
Applications
General Use
Type
Attenuation
(dB) min.
6dB Bandwidth (kHz) min.
Series
A
B
C
D
±17.5 ±15 ±12.5 ±10
E
F
G
H
J
K
L
±7.5
±6
±4.5
±3
±2
±1.5
±1
Within 455±80 or ±100kHz
SFPKA455KM
(4 Elements)
–
–
–
o
o
o
o
o
–
–
–
27 (G to H; 25)
CFUKG455KM
(4 Elements)
–
–
–
o
o
o
o
–
–
–
–
27 (G; 25)
Narrow Bandwidth
GDT Flat Type
Miniature Series
(Plastic Case Type)
CFUKG455KMX
(4 Elements)
–
–
–
–
o
o
o
o
–
–
–
27 (G to H; 25)
GDT Flat Type
Miniature Series
(Plastic Case Type)
CFUKF455KM
(4 Elements)
o
o
o
o
o
–
–
–
–
–
–
25 (D to E; 23)
GDT Flat Type
High Selectivity
SMD Series
(Plastic Case Type)
CFWKA450KBFY
(6 Elements)
–
o
–
–
–
–
–
–
–
–
–
45
High Selectivity
SMD Series
(Plastic Case Type)
CFWKA450KM
(6 Elements)
–
–
–
o
o
o
o
–
–
–
–
50
High Selectivity
Series
(Plastic Case Type)
oLead Type (kHz)
Applications
General Use
Type
Attenuation
(dB) min.
6dB Bandwidth (kHz) min.
Series
A
B
C
D
±17.5 ±15 ±12.5 ±10
E
F
G
H
J
K
L
±7.5
±6
±4.5
±3
±2
±1.5
±1
Within 455±80 or ±100kHz
(G; 25)
High Selectivity
Low Profile Series CFWLA455KM (6 Elements)
–
o
o
o
o
o
o
o
–
–
–
27 (H; 35)
–
o
o
o
o
o
o
o
o
–
–
35 (H, J; 60)
High Selectivity
Miniature Series
CFULB455KM (4 Elements)
–
o
o
o
o
o
o
o
o
–
–
27 (H, J; 35)
CFWLB455KM (6 Elements)
–
o
o
o
o
o
o
o
o
–
–
35 (H, J; 55)
GDT Flat Type
Series
CFULA455KMY (4 Elements)
–
o
o
o
o
o
o
–
–
–
–
25 (D to G; 23)
CFWLA455KMY (6 Elements)
o
o
o
o
o
o
o
–
–
–
–
40
GDT Flat Type
Miniature Series
CFULB455KMY (4 Elements)
–
o
o
o
o
o
o
–
–
–
–
25 (D to G; 23)
CFWLB455KMY (6 Elements)
o
o
o
o
o
o
o
–
–
–
–
40 (F; 35)
CFULA455KM (4 Elements)
4
(G; 25)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
1
CERAFILr kHz SMD Type SFPKA Series
7.5±0.3
8.4 max.
7.0±0.3
3.0±0.3
The SFPKA series is comprised of small, high-performance,
economical, thin (5.0mm) filters consisting of 4 ceramic
elements. Their innovative construction is perfect for
shrinking mobile communication products such as cordless
phones, pagers and transceivers.
MARKING
EIAJ
CODE
5.0 max.
0.9±0.1
c Features
2.0±0.3
1.5±0.3
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
3. They are slim, at only 5.0mm maximum thickness.
4. The bandwidth ranges from D to H.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
1.5±0.3
2.0±0.3
1.6±0.3
Connection
(1): Input
(2): Ground
(3): Output
(1) (2) (3)
(in mm)
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
SFPKA455KD4A-R1
455
±1.5kHz
fn±10.0
min.
fn±20.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
2.0 max.
[within fn±7kHz]
1500
SFPKA455KE4A-R1
455
±1.5kHz
fn±7.5
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±5kHz]
1500
SFPKA455KF4A-R1
455
±1.5kHz
fn±6.0
min.
fn±12.5 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±4kHz]
1500
SFPKA455KG1A-R1
455
±1.0kHz
fn±4.5
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±3kHz]
1500
SFPKA455KH1A-R1
455
±1.0kHz
fn±3.0
min.
fn±9.0 max.
[within 40dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±2kHz]
2000
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
(3)
(1)
(2)
Rg
RF Voltmeter
E1
R2
E2
S.S.G.
0dBm
Rg+R1=R2=Input/Output Impedance
E1: S.S.G. Output Voltage
(1): Input
(2): Ground
(3): Output
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
SFPKA455KE4A-R1
0
10
360
10
20
320
20
30
280
30
40
240
40
50
200
60
160
70
120
70
80
80
80
90
40
90
0
100
200
430
455
Frequency (kHz)
480
Attenuation (dB)
400
100
6
SFPKA455KE4A-R1
0
G.D.T. (μsec.)
Attenuation (dB)
1
50
60
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFUKG Series
MARKING
EIAJ
CODE
1.0±0.1
7.5 max.
6.5±0.3
The CFUKG series is comprised of small, high-performance,
thin (4.0mm) filters consisting of 4 ceramic elements.
Their innovative construction is perfect for shrinking
mobile communication products such as pocket pagers
and cellular phones.
2
C0.5
1.2±0.1
4.0 max.
1.0±0.1
c Features
4.0±0.3
1.0±0.3
1.0±0.3
1.5±0.3
6.0±0.3
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling flexible PCB design.
4. The bandwidth ranges from D to G.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
(1)
1.5±0.3
3.0±0.3
Connection
(1): Input
(2): Output
(3): Ground
(2)
(3)
(in mm)
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
CFUKG455KD4A-R0
455
±1.5kHz
fn±10.0
min.
fn±20.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
2.0 max.
[within fn±7kHz]
1500
CFUKG455KE4A-R0
455
±1.5kHz
fn±7.5
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±5kHz]
1500
CFUKG455KF4A-R0
455
±1.5kHz
fn±6.0
min.
fn±12.5 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±4kHz]
1500
CFUKG455KG1A-R0
455
±1.0kHz
fn±4.5
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1.5 max.
[within fn±3kHz]
1500
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
(1)
(2)
Rg
R2
E1
S.S.G.
0dBm
(3)
E2
RF Voltmeter
Connection
(1): Input
(2): Output
(3): Ground
Rg+R1=R2=Input/Output Impedance
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFUKG455KE4A-R0
CFUKG455KE4A-R0
0
2
0
400
10
10
20
20
30
40
40
200
50
60
70
Attenuation (dB)
30
G.D.T. (μsec.)
Attenuation (dB)
300
50
60
70
100
80
80
90
90
100
430
455
Frequency (kHz)
8
480
0
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFUKG_X Series
6.5±0.3
MARKING
EIAJ
CODE
1.0±0.1
7.5 max.
3
The CFUKG_X series is comprised of small, highperformance, thin (4.0mm) filters consisting of 4
ceramic elements.
The filters exhibit an extremely flat GDT
characteristic combined with a narrow bandwidth.
The filters are recommended for narrow band digital
communication applications.
C0.5
1.0±0.3
4.0±0.3
6.0±0.3
1.0±0.3
1.5±0.3
1.5±0.3
c Features
(1)
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling flexible PCB design.
4. The bandwidth ranges from E to H.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
6dB
Frequency (fo) Bandwidth
(kHz)
(kHz)
Part Number
Stop
Bandwidth
(kHz)
1.2±0.1
4.0 max.
1.0±0.1
3.0±0.3
Connection
(1): Input
(2): Output
(3): Ground
(2)
(3)
(in mm)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Ripple
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFUKG455KE4X-R0
455
±1.5kHz
fn±7.5
min.
fn±17.5 max.
27 min.
6.0 max.
1.0 max.
25.0 max.
[within 40dB] [within fn±100kHz] [at minimum loss point] [within fn±5kHz] [within fn±5kHz]
1500
CFUKG455KF4X-R0
455
±1.5kHz
fn±6.0
min.
fn±15.0 max.
27 min.
6.0 max.
1.0 max.
25.0 max.
[within 40dB] [within fn±100kHz] [at minimum loss point] [within fn±4kHz] [within fn±4kHz]
1500
CFUKG455KG1X-R0
455
±1.0kHz
fn±4.5
min.
fn±12.5 max.
25 min.
6.0 max.
1.0 max.
25.0 max.
[within 40dB] [within fn±100kHz] [at minimum loss point] [within fn±3kHz] [within fn±3kHz]
1500
CFUKG455KH1X-R0
455
±1.0kHz
fn±3.0
min.
fn±10.0 max.
25 min.
7.0 max.
1.0 max.
25.0 max.
[within 40dB] [within fn±100kHz] [at minimum loss point] [within fn±2kHz] [within fn±2kHz]
1500
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
(1)
(2)
Rg
E1
S.S.G.
0dBm
R2
(3)
E2
RF Voltmeter
Connection
(1): Input
(2): Output
(3): Ground
Rg+R1=R2=Input/Output Impedance
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFUKG455KE4X-R0
CFUKG455KE4X-R0
0
0
200
10
10
20
20
150
30
40
40
100
50
60
70
Attenuation (dB)
30
G.D.T. (μsec.)
Attenuation (dB)
3
50
60
70
50
80
80
90
90
100
430
455
Frequency (kHz)
10
480
0
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
6.5±0.3
The CFUKF series is comprised of small, high-performance,
thin (4.0mm) filters consisting of 4 ceramic elements.
The filters exhibit an extremely flat GDT
characteristic.
The filters are recommended for digital
communication applications and are perfect in hand-held
cellular phones, etc.
MARKING
EIAJ
CODE
1.0±0.1
7.5 max.
CERAFILr kHz SMD Type CFUKF Series
C0.5
1.0±0.3
4.0±0.3
6.0±0.3
1.0±0.3
1.5±0.3
1.5±0.3
c Features
(1)
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling flexible PCB design.
4. The bandwidth ranges from A to E.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
6dB
Frequency (fo) Bandwidth
(kHz)
(kHz)
Part Number
Stop
Bandwidth
(kHz)
4
1.2±0.1
4.0 max.
1.0±0.1
3.0±0.3
Connection
(1): Input
(2): Output
(3): Ground
(2)
(3)
(in mm)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Ripple
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFUKF455KA2X-R0
455
±2.0kHz
fn±17.5
min.
fn±40.0 max.
25 min.
4.0 max.
1.0 max.
[within 40dB] [within fn±100kHz] [at minimum loss point] [within fn±12kHz]
15.0 max.
[within fn±12kHz]
1000
CFUKF455KB4X-R0
455
±1.5kHz
fn±15.0
min.
fn±35.0 max.
25 min.
5.0 max.
1.0 max.
[within 40dB] [within fn±100kHz] [at minimum loss point] [within fn±10kHz]
15.0 max.
[within fn±10kHz]
1000
CFUKF455KC4X-R0
455
±1.5kHz
fn±12.5
min.
fn±30.0 max.
25 min.
6.0 max.
[within 40dB] [within fn±100kHz] [at minimum loss point]
1.0 max.
[within fn±8kHz]
15.0 max.
[within fn±8kHz]
1000
CFUKF455KD1X-R0
455
±1.0kHz
fn±10.0
min.
fn±25.0 max.
23 min.
7.0 max.
[within 40dB] [within fn±100kHz] [at minimum loss point]
1.0 max.
[within fn±7kHz]
20.0 max.
[within fn±7kHz]
1500
CFUKF455KE1X-R0
455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
23 min.
8.0 max.
[within 40dB] [within fn±100kHz] [at minimum loss point]
1.0 max.
[within fn±5kHz]
20.0 max.
[within fn±5kHz]
1500
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
(1)
(2)
Rg
R2
E1
S.S.G.
0dBm
(3)
E2
RF Voltmeter
Connection
(1): Input
(2): Output
(3): Ground
Rg+R1=R2=Input/Output Impedance
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFUKF455KE1X-R0
CFUKF455KE1X-R0
0
0
200
10
10
20
20
30
40
40
100
50
60
70
Attenuation (dB)
4
30
G.D.T. μ(sec.)
Attenuation (dB)
150
50
60
70
50
80
80
90
90
100
430
455
Frequency (kHz)
12
480
0
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
MARKING
6.5
The CFWKA series is comprised of small, high-performance,
thin (3.0mm) filters consisting of 6 ceramic elements.
The filters are recommend for pager or hand-held
cellular phones.
7.5 max.
CERAFILr kHz SMD Type CFWKA Series
EIAJ
CODE
Dot marking
Sealing
1.2±0.1
Nominal Center
3dB
6dB
Frequency (fn) Bandwidth Bandwidth
(kHz)
(kHz)
(kHz)
Part Number
3.0
(1)
(4)
3.0max.
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered.
3. They are slim, at only 3.0mm maximum thickness.
4. The filters are wide bandwidth, flat GDT within
pass band.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
C0.3 1.2±0.1
1.2±0.1
c Features
5.5 3.0
1.5±0.3
11.5
1.2±0.1
5.5 3.0
1.5±0.3 Sealing
5
(1): Input
(2): Output
(3)(4): Ground
(2)
(3)
( Tolerance ±0.3mm
in mm )
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Stop Band Att.(2)
(dB)
Insertion Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
CFWKA450KDFA-R0
450.0
-
fn±10.0
min.
fn±20.0 max.
50 min.
[within 50dB] [within fn±100kHz]
-
4.0 max.
[at minimum loss point]
3.0 max.
[within fn±7kHz]
1500
CFWKA450KEFA-R0
450.0
-
fn±7.5
min.
fn±15.0 max.
50 min.
[within 50dB] [within fn±100kHz]
-
6.0 max.
[at minimum loss point]
3.0 max.
[within fn±5kHz]
1500
CFWKA450KEFA001-R0
450.0
fn±6.5
min.
-
4.0 max.
[at fn]
3.0 max.
[within fn±6.5kHz]
1500
CFWKA450KFFA-R0
450.0
-
fn±6.0
min.
fn±12.5 min.
50 min.
[within 50dB] [within fn±100kHz]
-
6.0 max.
[at minimum loss point]
3.0 max.
[within fn±4kHz]
1500
CFWKA450KGFA-R0
450.0
-
fn±4.5
min.
fn±11.0 max.
50 min.
[within 50dB] [within fn±100kHz]
-
6.0 max.
[at minimum loss point]
2.0 max.
[within fn±3kHz]
1500
fn±15.0 max.
55 min.
50 min.
[within 50dB] [fn±18 to ±33kHz] [within fn±100kHz]
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
Rg
(1)
(2)
(4)
(3)
E1
R2
E2
S.S.G.
0dBm
RF Voltmeter
Connection
(1): Input
(2): Output
(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFWKA450KEFA001-R0
0
CFWKA450KEFA001-R0
0
400
10
4
20
8
300
30
200
20
24
28
Attenuation (dB)
16
G.D.T. (μ sec.)
Attenuation (dB)
12
40
50
60
70
100
5
32
80
36
90
40
0
440.0
450.0
100
460.0
430
Frequency (kHz)
CFWKA450KEFA001-R0
0
10
20
Attenuation (dB)
30
40
50
60
70
80
90
100
200
300
400
500
600
700
Frequency (kHz)
14
455
Frequency (kHz)
800
900
1000
480
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
Y50
B1
6.5
The CFWKA_Y series is comprised of small, highperformance, thin (3.0mm) filters consisting of 6
ceramic elements. The filters are recommend for
digital communication applications and are perfect
in hand-held cellular phones.
EIAJ
CODE
Dot marking
Sealing
5.5 3.0
1.5±0.3
11.5
3.0
1. The filters are mountable by automatic placers, and
can be reflow soldered.
2. They are slim, at only 3.0mm maximum thickness.
3. The filters are wide bandwidth, flat GDT within
pass band.
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Nominal Center
3dB
6dB
Frequency (fn) Bandwidth Bandwidth
(kHz)
(kHz)
(kHz)
CFWKA450KBFY001-R0
450.0
fn±11.5
min.
fn±13.0
min.
Stop
Bandwidth
(kHz)
1.2±0.1
3.0 max.
1.2±0.1
c Features
Part Number
7.5 max.
CERAFILr kHz SMD Type CFWKA_Y Series
(1)
(4)
C0.3 1.2±0.1
1.2±0.1
5.5 3.0
1.5±0.3 Sealing
(2)
(3)
(1): Input
(2): Output
(3)(4): Ground
( Tolerance ±0.3mm
in mm )
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Spurious
Response
(dB)
GDT Deviation
(µs)
fn±30.0 max.
45 min.
4.0 max.
20 min.
30.0 max.
[within 50dB] [within fn±100kHz] [at minimum loss point] [within 0.1 to 1.0MHz] [within fn±10kHz]
Input/Output
Impedance
(ohm)
1000
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
Rg
(1)
(2)
(4)
(3)
E1
R2
E2
S.S.G.
0dBm
RF Voltmeter
Connection
(1): Input
(2): Output
(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
15
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
0
0
200
10
2
4
20
150
8
10
100
12
14
Attenuation (dB)
30
G.D.T. (μ sec.)
Attenuation (dB)
6
40
50
60
70
50
16
80
18
90
20
0
420
6
430
440
450
460
Frequency (kHz)
16
470
480
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
kHz SMD Type CERAFILr Notice
c SFPKA/CFUKG/CFUKF Series Notice
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
0EAK
(260°C max.)
Temperature (°C)
260
230
Heating
(230°C)
Pre-heating
100
(150-180°C)
30 sec.
min.
60-120 sec.
Gradual
Cooling
SEC
max.
120 sec.
min.
(2) Soldering Iron
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(3) Other
Do not use strong acidity flux, more than 0.2wt% chlorine
content, in reflow soldering.
2. Wash
(1) Cleaning Solvent
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
7ATER $EMINERALIZED 7ATER #LEANING 7ATER 3OLUTION
(Cleanthrough-750H, Pine Alpha 100S), Silicon
4ECHNOCARE &27
(2) Cleaning Conditions
s )MMERSION 7ASH
2 minutes max. in above solvent at +60°C max.
s 3HOWER OR 2INSE 7ASH
2 minutes max. in above solvent at +60°C max.
(3) Notice
s 7HEN COMPONENTS ARE IMMERSED IN SOLVENT BE SURE TO
maintain the temperature of components below the
temperature of solvent.
s 0LEASE DO NOT USE ULTRASONIC CLEANING
s 4OTAL WASHING TIME SHOULD BE MINUTES MAXIMUM
s 0LEASE ENSURE THE COMPONENT IS THOROUGHLY EVALUATED IN
your application circuit.
s 0LEASE DO NOT USE CHLORINE PETROLEUM OR ALKALI CLEANING
solvent.
s )F YOU PLAN TO USE ANY OTHER TYPES OF SOLVENTS PLEASE
consult with Murata or Murata representative prior to
using.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
Continued on the following page.
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
kHz SMD Type CERAFILr Notice
Continued from the preceding page.
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid such places
where there are large temperature changes. Please store
the products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. If the component is cleaned, please confirm that the
reliability has not been degraded.
2. The components, packed in a moisture-proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
package cracks or reliability degradation caused by
thermal stress. When unpacked, store the component in
an atmosphere of below 25°C and below 65%R.H., and
solder within 48 hours.
18
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
kHz SMD Type CERAFILr Notice
c CFWKA Series Notice
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Peak
(260°C max.)
Temperature (°C)
260
230
Heating
(230°C)
Pre-heating
100
(150-180°C)
30 sec.
min.
60-120 sec.
Gradual
Cooling
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(3) Other
Do not use strong acidity flux, more than 0.2wt% chlorine
content, in reflow soldering.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
Do not apply conformal coating onto the component as
it's not hermetically sealed.
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to + 40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued on the following page.
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
kHz SMD Type CERAFILr Notice
Continued from the preceding page.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid applying a
direct current to the output of ceramic filters.
20
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr MHz SMD Type SFECF10M7 Series
SFECF10M7 series for FM receivers are small,
high-performance and super thin (1.4mm max.) filters.
The piezoelectric element is sandwiched by the
ceramics substrate.
They have 1.4mm max. thickness and a small mounting
area (3.45x3.1mm).
SFECF series and CDSCB series (MHz Discriminator)
enable customers to make VICS/RKE/TPMS set very thin
and small.
1.3±0.1
3.1±0.2
3.45±0.2
Input electrode
marker
0 to 0.4 (0.6) (0.6) (0.6) 0 to 0.4
(1.28)(1.28)
0.3 min. 0.3 min.
c Features
(1)
(6)
(2) (3)
(5) (4)
(1.28)(1.28)
0 to 0.35
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.4mm max. thickness, and
have a small mounting area (3.45x3.1mm) enabling
flexible PCB design.
3. Various bandwidths are available. Select a
suitable type in accordance with the desired
selectivity.
4. Operating Temperature Range:
-20 to +80 (°C)(Standard Type)
-40 to +85 (°C)(High-reliability Type)
Storage Temperature Range:
-40 to +85 (°C)(Standard Type)
-55 to +85 (°C)(High-reliability Type)
0.75±0.3
0.85±0.3 0.85±0.3
0.65±0.3 0.7±0.3 0.65±0.3
(1): Input
(2)(5): Ground
(3)(4): No connect
(6): Output
: EIAJ Monthly Code
( ): Reference
(in mm)
0 to 0.35
7
Standard Type
Part Number
Center
Nominal Center
Frequency Frequency (fn)
(fo) (MHz)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00-R0
10.700
±30kHz
-
180 ±40kHz
470 max.
4.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7HF00-R0
-
10.700
fn±25 min.
510 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7GA00-R0
10.700
±30kHz
-
230 ±50kHz
510 max.
3.5±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7GF00-R0
-
10.700
fn±45 min.
560 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7FA00-R0
10.700
±30kHz
-
280 ±50kHz
590 max.
3.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7FF00-R0
-
10.700
fn±65 min.
620 max.
7.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7EA00-R0
10.700
±30kHz
-
330 ±50kHz
700 max.
3.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7DA0001-R0
10.700
±30kHz
-
420 min.
950 max.
3.0±2.0dB
3.0 max.
35 min.
25 min.
[within 9MHz to fo] [within fo to 12MHz]
330
-
10.700
fn±150 min.
990 max.
6.0max.
[at fn]
3.0 max.
20 min.
20 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7DF00-R0
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.
Center frequency (fo) defined by center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
High-reliability Type
Center Nominal Center
Frequency Frequency (fn)
(fo) (MHz)
(MHz)
Part Number
Attenuation Insertion Loss
(kHz)
(dB)
Spurious
Attenuation
(1) (dB)
Ripple
(dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00S0-R0
10.700
±30kHz
-
180 ±40kHz
470 max.
4.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7HF00S0-R0
-
10.700
fn±25 min.
510 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7GA00S0-R0
10.700
±30kHz
-
230 ±50kHz
510 max.
3.5±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7GF00S0-R0
-
10.700
fn±45 min.
560 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7FA00S0-R0
10.700
±30kHz
-
280 ±50kHz
590 max.
3.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7FF00S0-R0
-
10.700
fn±65 min.
630 max.
7.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7EA00S0-R0
10.700
±30kHz
-
330 ±50kHz
700 max.
3.0±2.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7DF00S0-R0
-
10.700
fn±145 min.
990 max.
6.0max.
[at fn]
3.0 max.
20 min.
20 min.
[within 9MHz to fn] [within fn to 12MHz]
330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.
Center frequency (fo) defined by center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
(3)
(4)
(2)
(5)
R1
(6)
(1)
Rg
E1
C2
R2
E2
RF
Voltmeter
S.S.G.
Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%
C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance
of RF Volt Meter)
E1: S.S.G. Output Voltage
(1): Input
(2)(5): Ground
(3)(4): No connect
(6): Output
c Frequency Characteristics
SFECF10M7FA00-R0
7.0
0
1
6.0
10
2
5.0
20
3
4.0
4
3.0
5
2.0
50
6
1.0
60
7
10.500
10.700
Frequency (MHz)
10.900
0.0
11.100
Attenuation (dB)
0
10.300
22
SFECF10M7FA00-R0
G.D.T. (μsec.)
Attenuation (dB)
7
3dB
Bandwidth
(kHz)
30
40
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr MHz SMD Type SFSCE10M7 Series
4.5
(1.8)
(0.3)
(4)
(3)
(1)
(2)
(2.25)
0.6 1.1
0.85 0.15 1.0 max.
(4.0)
(4-R0.3)
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.0mm max. thickness, and
have a small mounting area (4.5x3.8mm) enabling
flexible PCB design.
3. Available lead (Pb) free solder reflow.
4. Operating temperature range:
-20 to +80 (°C)
Storage temperature range:
-40 to +85 (°C)
(3.5)
*
(3)
(4)
c Features
0.4
(2)
3.8
(1)
(1): Input
(2): Output
(3): No Connect
(4): Ground
* : EIAJ Monthly Code
Tolerance unless
otherwise specified: ±0.1
( ): Reference
0.15
(in mm)
0.3
SFSCE series are chip surface mount filters available for
3dB bandwidth at 700kHz to 1.3MHz. (more than twice
width compared with current types)
They have 1.0mm max. thickness and small mounting area
(4.5x3.8mm).
8
c Applications
1. SS digital communication system
2. Digital wireless audio
3. PHS Evolution system
4. RFID Reader Writer
5. RKE
Nominal Center
3dB
Frequency (fn) Bandwidth
(MHz)
(kHz)
Part Number
Stop
Bandwidth
(MHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Response
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
SFSCE10M7WF03-R0
10.700
fn±500.0
min.
2.2 max. (Total)
6.0 max.
2.0 max.
30/25 min.
0.6 max.
[within 20dB] [at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn±400kHz]
470
SFSCE10M7WF04-R0
10.700
fn±400.0
min.
1.8 max. (Total)
6.0 max.
1.5 max.
35/25 min.
0.6 max.
[within 20dB] [at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn±325kHz]
470
SFSCE10M7WF05-R0
10.700
fn±325.0
min.
1.7 max. (Total)
6.0 max.
1.5 max.
40/30 min.
0.6 max.
[within 20dB] [at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn±250kHz]
470
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
(4)
(3)
(1)
(2)
R1
Rg
R2
S.S.G.
C2
RF
Voltmeter
(1): Input
(2): Output
(3): No Connect
(4): Ground
R1+Rg=R2=Input/Output Impedance, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output Voltage
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
SFSCE10M7WF03-R0
SFSCE10M7WF03-R0
0
2.0
2
1.6
0
1.2
6
0.8
8
0.4
Attenuation (dB)
4
G.D.T. (μsec.)
Attenuation (dB)
20
40
60
10
9.500
9.900
10.300
10.700
11.100
Frequency (MHz)
8
24
11.500
0.0
11.900
80
6.700
8.700
10.700
Frequency (MHz)
12.700
14.700
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
MHz SMD Type CERAFILr Notice
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Temperature (°C)
c SFECF10M7 Series Notice
o Soldering and Mounting
Peak
(260°C max.)
260
230
Pre-heating
(150-180°C)
100
Heating
(230°C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Condition for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent the electrode erosion.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
[Component Direction]
Place the
component
lateral to the
direction in
which stress
acts.
[Component Layout Close to Board]
Perforation
A
B
Slit
C
Susceptibility to
stress is in the order
of : A>C>B
Continued on the following page.
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
MHz SMD Type CERAFILr Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. The components, packed in a moisture proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
reliability degradation caused by thermal stress. When
unpacked, store the component in an atmosphere of
reflow 30°C and below 60%R.H., and solder within 1
week.
26
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
MHz SMD Type CERAFILr Notice
c SFSCE10M7WF03-R0 Notice
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Peak
(240°C max.)
Temperature (°C)
240
230
Heating
(230°C)
Pre-heating
100
(150-180°C)
30 sec.
min.
Gradual
Cooling
60-120 sec.
30 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +280±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Condition for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
[Component Layout Close to Board]
Perforation
A
Susceptibility to
stress is in the order
of : A>C>B
B
Slit
C
[Component Direction]
Place the component laterally to the
direction in which
stress acts.
Continued on the following page.
27
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
MHz SMD Type CERAFILr Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to + 40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
28
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
MHz SMD Type CERAFILr Notice
c SFSCE10M7WF04/05-R0 Notice
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Peak
(260°C max.)
Temperature (°C)
260
230
Heating
(230°C)
Pre-heating
100
(150-180°C)
30 sec.
min.
Gradual
Cooling
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +280±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Condition for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
[Component Layout Close to Board]
Perforation
A
Susceptibility to
stress is in the order
of : A>C>B
B
Slit
C
[Component Direction]
Place the component laterally to the
direction in which
stress acts.
Continued on the following page.
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
MHz SMD Type CERAFILr Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to + 40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
30
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
SMD Type CERAFILr Standard Land Pattern Dimensions
c SFPKA Series
c CFUKG/CFUKF Series
0.7
1.2
0.8
6.95
2.0
0.7
1.4
1.2
2.0
0.9
1.1
0.925
2.0
1.55
3.5
7.45
2.0
1.6
2.475
2.0
(in mm)
(in mm)
c SFECF10M7 Series
3.0
(6)
(5)
(4)
(1)
(2)
(3)
0.5
1.05
0.1
2.1
1.6
4-R3.0
0.1
6.5
7.5
0.3
0.1
1.40
0.3
1.2
1.05
11.5
5.5
3.0
0.1
0.3
0.1
c CFWKA Series
0.1
0.8
0.6
0.8
0.6
1.8
(in mm)
It shows solder resist land pattern.
0.8
(1): Input
(2)(5): Ground
(3)(4): No connect
(6): Output
(in mm)
c SFSCE10M Series
1.05
1.4
0.1
(4)
0.5
1.15 0.8
1.3
(3)
0.1
0.1
(2)
(1)
0.5
It shows solder resist land pattern.
(1): Input
(2): Output
(3): No Connect
(4): Ground
(in mm)
31
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
kHz SMD Type CERAFILr Packaging
c Minimum Quantity
Part Number
ø180mm
ø330mm
SFPKA
1,000
CFUKG
450
CFUKF
450
CFWKA
350
c SFPKA Series
Dimensions of Carrier Tape
Trailer
160 to 190
1.75±0.1
Empty
Leader
Cover film
Components
Empty
240 to 280
ø13.0±0.2
80±1
330±2
400 to 560
8.8±0.1
+0.1
-0
7.5±0.1
2.0±0.1
ø1.5
16.0±0.2
4.0±0.1
Dimensions of Reel
2.2±0.5
12.0±0.1
User direction of feed
5.3±0.1
Cover film
Label
17.5±0.5
21.5±1.0
7.4±0.1
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UP
(in mm)
c CFUKG/CFUKF Series
Dimensions of Carrier Tape
8.0±0.1
6.7±0.1
5SER DIRECTION OF FEED
Cover film
(ø60 +1.0
-0 )
(ø180+0
-3.0 )
7.7±0.1
8.1±0.1
Empty
16.0±0.2
ø1.5 +0.1
-0.0
6.76±0.1 7.5±0.1
2.0±0.1
Trailer
160 to 190
1.75±0.1
4.0±0.1
Dimensions of Reel
Leader
Cover film
Components
2.0±0.2
ø13.0±0.5
Empty
160 to 200
400 to 560
4.2±0.1
17.0±1.0
19.4±0.3
6.3±0.1
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UP
(in mm)
Continued on the following page.
32
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
kHz SMD Type CERAFILr Packaging
Continued from the preceding page.
c CFWKA Series
Dimensions of Carrier Tape
1.75±0.1
Trailer
160 to 190
(ø178±2.0)
(ø62.0±1.0)
12.0±0.1
Empty
12.4±0.1
11.5±0.1
ø1.5 +0.1
-0.0
24.0±0.3
4.0±0.1
2.0±0.1
Dimensions of Reel
Leader
Cover film
Components
2.0±0.2
ø13.0±0.5
Empty
240 to 280
400 to 560
25.5±1.0
0.4±0.1
12.0±0.1
8.1±0.1
7.7±0.1
29.9±1.0
3.2±0.1
User direction of feed
Cover film
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UP
(in mm)
33
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
MHz SMD Type CERAFILr Packaging
c Minimum Quantity
Part Number
ø180mm
SFECF
2,000
SFSCE
1,500
c SFECF10M7 Series
Dimensions of Carrier Tape
Dimensions of Reel
Cover film
(3°)
10° max.
3° max.
Leader
Cover film
Components
Empty
240 to 280
400 to 560
180 +0
-1.5
ø13.0±0.5
60 +1.0
-0
12.0±0.2
5.5±0.05
Empty
2.0±0.5
4.1±0.1
Peeling strength
(0.1 to 0.7N)
+0.1
3.35 -0.05
(0.05)
4.0±0.1
0.3±0.05
4.1±0.1
Chip filter
1.84±0.1
ø1.55±0.05 2.0±0.05
Trailer
160 to 190
1.75±0.1
4.0±0.1
17.0±1.0
13.0 +1.0
-0
User direction of feed
( ): Reference
(in mm)
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UP
c SFSCE10M7 Series
Dimensions of Reel
,EADER
Cover film
Trailer
TO ±
±
’±
%MPTY
± MAX
±
%MPTY
TO TO ’±
±
±
#OMPONENTS
±
±
±
Dimensions of Carrier Tape
±
0EELING STRENGTH
TO .
Cover film ± (3°)
MAX
±
’±
±
5SER DIRECTION OF FEED
s 0ART .UMBER MARKED SIDE IS ALWAYS FACING UP
(in mm)
34
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case General Use CFULA Series
8.0±0.3
7.0±0.3
MARKING
2.7±0.3
1. High selectivity
2. A variety of bandwidths available
3. Excellent GDT characteristics are available within
pass bandwidth.
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
(2)
0.8±0.1
3.0±0.3
0.15±0.05
c Features
1.2±0.5
(1)
(3)
4.2±0.3
1.5 max.
7.3±0.3
EIAJ
CODE
0.3±0.1
CFULA series are high selectivity ceramic filters,
which consist of 4 ceramic elements connected in a
ladder form.
They are most suitable for digital communications
and cellular phones because of their improved GDT
characteristics.
3.3±0.5
0.6±0.1
Connection
(1): Input
(2): Ground
(3): Output
(in mm)
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Input/Output
Impedance
(ohm)
CFULA455KB2A-B0
455
±2.0kHz
fn±15.0
min.
fn±30.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1500
CFULA455KC2A-B0
455
±2.0kHz
fn±12.5
min.
fn±24.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1500
CFULA455KD4A-B0
455
±1.5kHz
fn±10.0
min.
fn±20.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1500
CFULA455KE4A-B0
455
±1.5kHz
fn±7.5
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1500
CFULA455KF4A-B0
455
±1.5kHz
fn±6.0
min.
fn±12.5 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
CFULA455KG1A-B0
455
±1.0kHz
fn±4.5
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
CFULA455KH1A-B0
455
±1.0kHz
fn±3.0
min.
fn±9.0 max.
[within 40dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
Part Number
9
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
Rg
E1
(3)
(1) (2)
R2
E2
S.S.G.
0dBm
RF Voltmeter
Connection
(1): Input
(2): Ground
(3): Output
Rg+R1=R2=Input/Output Impedance
35
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFULA455KE4A-B0
CFULA455KE4A-B0
0
0
200
10
10
20
20
30
40
40
100
50
60
Attenuation (dB)
30
G.D.T. (μsec.)
Attenuation (dB)
150
50
60
70
70
50
80
80
90
90
100
430
455
Frequency (kHz)
9
36
480
0
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case General Use CFWLA Series
7.5±0.5
EIAJ
CODE
0.15
1. Low profile, high selectivity
2. Available bandwidths are B to J as standard
3. Easily mountable on any PC board
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Nominal Center
6dB
Frequency (fn) Bandwidth
(kHz)
(kHz)
Part Number
2.9±0.3
0.8±0.1
3.5±0.5
c Features
2.6±0.3
2.9±0.3
2.9—0.3
(4) (3)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
(2)
(1)
(5)
Insertion Loss
(dB)
4.3±0.3
1.35±0.5
1.2±0.5
2.3±0.5
1.5 max.
MARKING
7.0±0.5
11.0±0.5
Ceramic filter CFWLA series are low profile high
selectivity ceramic filters, which use 6 elements in
ladder form.
They are best suitable to high-class transceivers,
cordless telephones and amateur radios.
0.6±0.1
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(in mm)
2.0±0.3
Ripple
(dB)
Input/Output
Impedance
(ohm)
CFWLA455KBFA-B0
455.0
fn±15.0
min.
fn±30.0 max.
35 min.
4.0 max.
3.0 max.
[within 50dB] [within fn±100kHz] [at minimum loss point] [within fn±10kHz]
1500
CFWLA455KCFA-B0
455.0
fn±12.5
min.
fn±24.0 max.
35 min.
4.0 max.
[within 50dB] [within fn±100kHz] [at minimum loss point]
3.0 max.
[within fn±8kHz]
1500
CFWLA455KDFA-B0
455.0
fn±10.0
min.
fn±20.0 max.
35 min.
4.0 max.
[within 50dB] [within fn±100kHz] [at minimum loss point]
3.0 max.
[within fn±7kHz]
1500
CFWLA455KEFA-B0
455.0
fn±7.5
min.
fn±15.0 max.
35 min.
6.0 max.
[within 50dB] [within fn±100kHz] [at minimum loss point]
3.0 max.
[within fn±5kHz]
1500
CFWLA455KFFA-B0
455.0
fn±6.0
min.
fn±12.5 max.
35 min.
6.0 max.
[within 50dB] [within fn±100kHz] [at minimum loss point]
3.0 max.
[within fn±4kHz]
2000
CFWLA455KGFA-B0
455.0
fn±4.5
min.
fn±10.0 max.
35 min.
6.0 max.
[within 50dB] [within fn±100kHz] [at minimum loss point]
2.0 max.
[within fn±3kHz]
2000
CFWLA455KHFA-B0
455.0
fn±3.0
min.
fn±9.0 max.
[within 50dB]
60 min.
6.0 max.
[within fn±100kHz] [at minimum loss point]
2.0 max.
[within fn±2kHz]
2000
CFWLA455KJFA-B0
455.0
fn±2.0
min.
fn±7.5 max.
[within 50dB]
60 min.
7.0 max.
2.0 max.
[within fn±100kHz] [at minimum loss point] [within fn±1.5kHz]
10
2000
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
(5)
R1
(1) (2) (3) (4)
R2
E2
Rg
E1
S.S.G.
0dBm
RF Voltmeter
Connection
(1): Input
(5): Output
(2)(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
37
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFWLA455KEFA-B0
CFWLA455KEFA-B0
0
400
0
10
10
20
20
30
40
40
200
50
60
70
Attenuation (dB)
30
G.D.T. (μsec.)
Attenuation (dB)
300
50
60
70
100
80
80
90
90
100
430
455
Frequency (kHz)
10
38
480
0
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Miniaturized Type CFULB Series
CFULB series ceramic filters are miniature, highperformance ceramic filters composed of piezoelectric
elements connected in a ladder form.
These filters, only 6.3mm high, are 65% the
volume of conventional types.
They are well suited for miniaturizing various kinds
of communications equipment, pocket pagers, car
radios, cordless telephones and mobile telephones.
0.15±0.05
(1)
c Features
(3)
1. Miniature and high selectivity
2. A variety of bandwidths are available
3. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
(2)
(4)
1.0 max.
0.5±0.1
4.3±0.3
0.8±0.3
1.8±0.3
0.7±0.3
Connection
(1): Input
(2): Output
(3)
: Ground
(4)
1.0±0.3
2.4±0.3
0.7±0.1
3.5±0.3
6.3±0.3
EIAJ
CODE
6.5±0.3
6.5±0.3
MARKING
(in mm)
}
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Input/Output
Impedance
(ohm)
CFULB455KB2A-B0
455
±2.0kHz
fn±15.0
min.
fn±30.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1500
CFULB455KC2A-B0
455
±2.0kHz
fn±12.5
min.
fn±24.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1500
CFULB455KD4A-B0
455
±1.5kHz
fn±10.0
min.
fn±20.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1500
CFULB455KE4A-B0
455
±1.5kHz
fn±7.5
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1500
CFULB455KF4A-B0
455
±1.5kHz
fn±6.0
min.
fn±12.5 max.
[within 40dB]
27 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
CFULB455KG1A-B0
455
±1.0kHz
fn±4.5
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
CFULB455KH1A-B0
455
±1.0kHz
fn±3.0
min.
fn±9.0 max.
[within 40dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
CFULB455KJ1A-B0
455
±1.0kHz
fn±2.0
min.
fn±7.5 max.
[within 40dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
Part Number
11
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
CFULB455K_series filters are 4-element ceramic filters and miniature versions of CFULA455K_series.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
(1)
(2)
(3) (4)
Rg
E1
R2
S.S.G.
0dBm
E2
RF Voltmeter
Connection
(1): Input
(2): Output
(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
39
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFULB455KE4A-B0
CFULB455KE4A-B0
0
0
200
10
10
20
20
30
40
40
100
50
60
Attenuation (dB)
30
G.D.T. (μsec.)
Attenuation (dB)
150
50
60
70
70
50
80
80
90
90
100
430
455
Frequency (kHz)
11
40
480
0
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Miniaturized Type CFWLB Series
3.5±0.3
6.3±0.3
EIAJ
CODE
0.15±0.05
c Features
(3)
1. Miniature and high selectivity
2. A variety of bandwidths are available.
3. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
(4)
(5)
0.7±0.3
1.0±0.3
(2)
(1)
4.3±0.3
2.5±0.3 2.7±0.3 2.8±0.3
0.9±0.3
1.0 max.
MARKING
6.5±0.3
9.5±0.3
CFWLB series ceramic filters are miniature, highperformance ceramic filters composed of piezoelectric
elements connected in a ladder form.
These filters, only 6.3mm high, are 67% the volume
of conventional types.
They are well suited for miniaturizing various kinds
of communications equipment, pocket pagers, pagers,
car radios, cordless telephones and mobile telephones.
0.7±0.1
0.5±0.1
Connection
(1): Input
(2): Output
(3)
(4) : Ground
(5)
}
(in mm)
Nominal Center
Frequency (fn)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Input/Output
Impedance
(ohm)
CFWLB455KBFA-B0
455.0
fn±15.0
min.
fn±30.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1500
CFWLB455KCFA-B0
455.0
fn±12.5
min.
fn±24.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1500
CFWLB455KDFA-B0
455.0
fn±10.0
min.
fn±20.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
4.0 max.
[at minimum loss point]
1500
CFWLB455KEFA-B0
455.0
fn±7.5
min.
fn±15.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
1500
CFWLB455KEFA004-B0
455.0
fn±7.5
min.
fn±15.0 max.
[within 60dB]
60 min.
[within fn±15kHz to 30kHz]
5.0 max.
[at fn]
1500
CFWLB455KFFA-B0
455.0
fn±6.0
min.
fn±12.5 max.
[within 50dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
CFWLB455KGFA-B0
455.0
fn±4.5
min.
fn±10.0 max.
[within 50dB]
35 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
CFWLB455KHFA-B0
455.0
fn±3.0
min.
fn±9.0 max.
[within 50dB]
55 min.
[within fn±100kHz]
6.0 max.
[at minimum loss point]
2000
CFWLB455KJFA-B0
455.0
fn±2.0
min.
fn±7.0 max.
[within 50dB]
55 min.
[within fn±100kHz]
7.0 max.
[at minimum loss point]
2000
Part Number
12
CFWLB455K_series filters are 4-element ceramic filters and miniature versions of CFWLA455K_series.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
41
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Test Circuit
R1
(1)
(2)
(3)
(4) (5)
Rg
E1
S.S.G.
0dBm
R2
RF Voltmeter
Connection
E2
(1): Input
(2): Output
(3)(4)(5): Ground
Rg+R1=R2=Input/Output Impedance
c Frequency Characteristics
CFWLB455KEFA-B0
CFWLB455KEFA-B0
0
0
200
10
10
20
20
30
40
40
100
50
60
70
Attenuation (dB)
30
G.D.T. (μsec.)
Attenuation (dB)
150
50
60
70
50
80
80
90
90
100
430
455
Frequency (kHz)
12
42
480
0
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series
2.7±0.3
1. High selectivity
2. A variety of bandwidths are available.
3. Excellent GDT characteristics are available within
pass bandwidth.
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
(2)
(1)
(3)
0.8±0.1
3.0±0.3
0.15±0.05
c Features
1.2±0.5
4.2±0.3
1.5 max.
7.3±0.3
EIAJ
CODE
0.3±0.1
MARKING
7.0±0.3
8.0±0.3
CFULA_Y series are high selectivity ceramic filters,
which consist of 4 ceramic elements connected in a
ladder form.
They are most suitable for digital communications
and cellular phones because of their improved GDT
characteristics.
3.3±0.5
0.6±0.1
Connection
(1): Input
(2): Ground
(3): Output
(in mm)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
25 min.
5.0 max.
[within fn±100kHz] [at minimum loss point]
15.0 max.
[within fn±10kHz]
1500
fn±30.0 max.
[within 40dB]
25 min.
6.0 max.
[within fn±100kHz] [at minimum loss point]
15.0 max.
[within fn±8kHz]
1500
fn±10.0
min.
fn±25.0 max.
[within 40dB]
23 min.
7.0 max.
[within fn±100kHz] [at minimum loss point]
20.0 max.
[within fn±7kHz]
1500
455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
[within 40dB]
23 min.
8.0 max.
[within fn±100kHz] [at minimum loss point]
20.0 max.
[within fn±5kHz]
1500
CFULA455KF1Y-B0
455
±1.0kHz
fn±6.0
min.
fn±17.5 max.
[within 40dB]
23 min.
9.0 max.
[within fn±100kHz] [at minimum loss point]
20.0 max.
[within fn±4kHz]
2000
CFULA455KG1Y-B0
455
±1.0kHz
fn±4.5
min.
fn±15.0 max.
[within 40dB]
23 min.
10.0 max.
[within fn±100kHz] [at minimum loss point]
20.0 max.
[within fn±3kHz]
2000
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
CFULA455KB4Y-B0
455
±1.5kHz
fn±15.0
min.
fn±35.0 max.
[within 40dB]
CFULA455KC4Y-B0
455
±1.5kHz
fn±12.5
min.
CFULA455KD1Y-B0
455
±1.0kHz
CFULA455KE1Y-B0
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
13
c Test Circuit
R1
Rg
E1
(3)
(1) (2)
R2
E2
S.S.G.
0dBm
RF Voltmeter
Connection
(1): Input
(2): Ground
(3): Output
Rg+R1=R2=Input/Output Impedance
43
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFULA455KE1Y-B0
CFULA455KE1Y-B0
0
0
200
10
10
20
20
150
30
100
50
60
70
40
Attenuation (dB)
40
Group Delay Time (μsec)
Attenuation (dB)
30
50
60
70
50
80
80
90
90
100
0
430
455
Frequency (kHz)
13
44
480
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series
7.5±0.5
EIAJ
CODE
2.9±0.3
1. High selectivity
2. A variety of bandwidths are available
3. Excellent GDT characteristics are available within
pass bandwidth.
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
0.8±0.1
3.5±0.5
0.15
c Features
2.6±0.3
2.9±0.3
2.9—0.3
(4) (3)
(2)
(5)
(1)
4.3±0.3
1.35±0.5
1.2±0.5
2.3±0.5
1.5 max.
MARKING
7.0±0.5
11.0±0.5
CFWLA_Y series are high selectivity ceramic filters,
which consist of 6 ceramic elements connected in a
ladder form.
They are most suitable for digital communications
and mobile telephones because of their improved
GDT characteristics.
0.6±0.1
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(in mm)
2.0±0.3
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
40 min.
6.0 max.
[within fn±100kHz] [at minimum loss point]
30.0 max.
[within fn±10kHz]
1500
fn±27.5 max.
[within 50dB]
40 min.
7.0 max.
[within fn±100kHz] [at minimum loss point]
30.0 max.
[within fn±8kHz]
1500
fn±10.0
min.
fn±25.0 max.
[within 50dB]
40 min.
8.0 max.
[within fn±100kHz] [at minimum loss point]
30.0 max.
[within fn±7kHz]
1500
455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
[within 50dB]
40 min.
9.0 max.
[within fn±100kHz] [at minimum loss point]
30.0 max.
[within fn±5kHz]
1500
CFWLA455KF1Y-B0
455
±1.0kHz
fn±6.0
min.
fn±17.5 max.
[within 50dB]
40 min.
10.0 max.
[within fn±100kHz] [at minimum loss point]
40.0 max.
[within fn±4kHz]
2000
CFWLA455KG1Y-B0
455
±1.0kHz
fn±4.5
min.
fn±15.0 max.
[within 50dB]
40 min.
11.0 max.
[within fn±100kHz] [at minimum loss point]
40.0 max.
[within fn±3kHz]
2000
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
CFWLA455KB4Y-B0
455
±1.5kHz
fn±15.0
min.
fn±30.0 max.
[within 50dB]
CFWLA455KC4Y-B0
455
±1.5kHz
fn±12.5
min.
CFWLA455KD1Y-B0
455
±1.0kHz
CFWLA455KE1Y-B0
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
14
c Test Circuit
(5)
R1
(1) (2) (3) (4)
R2
E2
Rg
E1
S.S.G.
0dBm
RF Voltmeter
Connection
(1): Input
(5): Output
(2)(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
45
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFWLA455KE1Y-B0
CFWLA455KE1Y-B0
0
0
400
10
10
20
20
300
30
200
50
60
70
40
Attenuation (dB)
40
Group Delay Time (μsec)
Attenuation (dB)
30
50
60
70
100
80
80
90
90
100
0
430
455
Frequency (kHz)
14
46
480
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series
Ceramic filter CFULB_Y series are miniature and highperformance filters. These filters, only 6.3mm
high, are 65% the volume of conventional types.
Well suited for miniaturizing communications
equipment, especially for a cellular phone.
0.15±0.05
2.4±0.3
0.8±0.3
1.8±0.3
0.7±0.3
(1)
(2)
(3)
(4)
1.0 max.
0.5±0.1
4.3±0.3
1. Miniature, flat GDT characteristics
2. Suitable for a cellular phone
3. A variety of bandwidths are available.
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Connection
(1): Input
(2): Output
(3)
: Ground
(4)
1.0±0.3
c Features
0.7±0.1
3.5±0.3
6.3±0.3
EIAJ
CODE
6.5±0.3
6.5±0.3
MARKING
(in mm)
}
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
25 min.
5.0 max.
[within fn±100kHz] [at minimum loss point]
15.0 max.
[within fn±10kHz]
1500
fn±30.0 max.
[within 40dB]
25 min.
6.0 max.
[within fn±100kHz] [at minimum loss point]
15.0 max.
[within fn±8kHz]
1500
fn±10.0
min.
fn±25.0 max.
[within 40dB]
23 min.
7.0 max.
[within fn±100kHz] [at minimum loss point]
20.0 max.
[within fn±7kHz]
1500
455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
[within 40dB]
23 min.
8.0 max.
[within fn±100kHz] [at minimum loss point]
20.0 max.
[within fn±5kHz]
1500
CFULB455KF1Y-B0
455
±1.0kHz
fn±6.0
min.
fn±17.5 max.
[within 40dB]
23 min.
9.0 max.
[within fn±100kHz] [at minimum loss point]
20.0 max.
[within fn±4kHz]
2000
CFULB455KG1Y-B0
455
±1.0kHz
fn±4.5
min.
fn±15.0 max.
[within 40dB]
23 min.
10.0 max.
[within fn±100kHz] [at minimum loss point]
20.0 max.
[within fn±3kHz]
2000
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
CFULB455KB4Y-B0
455
±1.5kHz
fn±15.0
min.
fn±35.0 max.
[within 40dB]
CFULB455KC4Y-B0
455
±1.5kHz
fn±12.5
min.
CFULB455KD1Y-B0
455
±1.0kHz
CFULB455KE1Y-B0
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
CFULB455K_Y series filters are 4-element ceramic filters and miniature versions of CFULA455K_Y series.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
(1)
(2)
(3) (4)
Rg
E1
R2
S.S.G.
0dBm
E2
15
RF Voltmeter
Connection
(1): Input
(2): Output
(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
47
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFULB455KE1Y-B0
CFULB455KE1Y-B0
0
0
200
10
10
20
20
150
30
100
50
60
70
40
Attenuation (dB)
40
Group Delay Time (μsec)
Attenuation (dB)
30
50
60
70
50
80
80
90
90
100
0
430
455
Frequency (kHz)
15
48
480
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series
c Features
3.5±0.3
6.3±0.3
EIAJ
CODE
0.15±0.05
(3)
(4)
(5)
0.7±0.3
1.0±0.3
(2)
(1)
4.3±0.3
2.5±0.3 2.7±0.3 2.8±0.3
0.9±0.3
1. Miniature, flat GDT characteristics
2. Suitable for a cellular phone
3. A variety of bandwidths are available.
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
1.0 max.
MARKING
6.5±0.3
9.5±0.3
Ceramic filter CFWLB_Y series are miniature and
high-performance filters. These filters, only
6.3mm high, are 67% the volume of conventional types.
Well suited for miniaturizing communications
equipment, especially for a cellular phone.
0.7±0.1
0.5±0.1
Connection
(1): Input
(2): Output
(3)
(4) : Ground
(5)
}
(in mm)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
40 min.
6.0 max.
[within fn±100kHz] [at minimum loss point]
30.0 max.
[within fn±10kHz]
1500
fn±27.5 max.
[within 50dB]
40 min.
7.0 max.
[within fn±100kHz] [at minimum loss point]
30.0 max.
[within fn±8kHz]
1500
fn±10.0
min.
fn±25.0 max.
[within 50dB]
40 min.
8.0 max.
[within fn±100kHz] [at minimum loss point]
30.0 max.
[within fn±7kHz]
1500
455
±1.0kHz
fn±7.5
min.
fn±20.0 max.
[within 50dB]
40 min.
9.0 max.
[within fn±100kHz] [at minimum loss point]
30.0 max.
[within fn±5kHz]
1500
CFWLB455KF1Y-B0
455
±1.0kHz
fn±6.0
min.
fn±17.5 max.
[within 50dB]
35 min.
10.0 max.
[within fn±100kHz] [at minimum loss point]
40.0 max.
[within fn±4kHz]
2000
CFWLB455KG1Y-B0
455
±1.0kHz
fn±4.5
min.
fn±15.0 max.
[within 50dB]
40 min.
11.0 max.
[within fn±100kHz] [at minimum loss point]
40.0 max.
[within fn±3kHz]
2000
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
CFWLB455KB4Y-B0
455
±1.5kHz
fn±15.0
min.
fn±30.0 max.
[within 50dB]
CFWLB455KC4Y-B0
455
±1.5kHz
fn±12.5
min.
CFWLB455KD1Y-B0
455
±1.0kHz
CFWLB455KE1Y-B0
Stop Band
Attenuation
(dB)
Insertion Loss
(dB)
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
CFWLB455K_Y series filters are 4-element ceramic filters and miniature versions of CFWLA455K_Y series.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
R1
(1)
(2)
(3)
(4) (5)
Rg
S.S.G.
0dBm
E1
R2
E2
RF Voltmeter
Connection
16
(1): Input
(2): Output
(3)(4)(5): Ground
Rg+R1=R2=Input/Output Impedance
49
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Frequency Characteristics
CFWLB455KE1Y-B0
CFWLB455KE1Y-B0
0
200
0
10
10
20
20
150
30
100
50
60
70
40
Attenuation (dB)
40
Group Delay Time (μsec)
Attenuation (dB)
30
50
60
70
50
80
80
90
90
100
430
455
Frequency (kHz)
16
50
480
0
100
200
300
400
500
600
700
Frequency (kHz)
800
900
1000
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Plastic Case Type CERAFILr Minimum Quantity/Notice
c Minimum Quantity
Part Number
Bulk
CFULA Series
200
CFULB Series
250
CFWLA Series
150
CFWLB Series
150
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
(pcs.)
c Notice
o Soldering and Mounting
The component cannot withstand washing.
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Do not use this product with bend. The component may
be damaged if excessive mechanical stress is applied to
it mounted on the printed circuit board.
2. All kinds of reflow soldering must not be applied on the
component.
3. Do not clean or wash the component as it is not
hermetically sealed.
4. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in flow soldering.
5. Conformal coating of the component is not acceptable
due to non-sealed construction.
6. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
7. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
51
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Ceramic Discriminators for Communications Equipment
kHz Type Ceramic Discriminators
6.0±0.2
6.2±0.2
MARKING
6.6±0.3
Ceramic discriminator consists of a wide band
piezoelectric resonator.
It is ideal for mobile communications equipment due to
its small size and light weight.
Standard line includes products for a wide range of
applications, from cordless telecom to cellular
telephone. Practically adjustment free at the detection
circuit, small size is suitable for downsizing.
EIAJ
CODE
3.1 max.
1.0±0.1
3.7±0.2
1.15±0.2
c Features
1.5±0.3
CDBKB Series
1. Small in size and light weight
2. Adjustment free at detection circuit
3. High sensitivity and stability
4. Wide range of standard products are available for
various ICs.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
(in mm)
6.0±0.2
6.3 max.
0.5±0.1
0.15±0.05
1.8±0.2 0.6±0.2
EIAJ
CODE
6.0 max.
MARKING
4.2±0.5
3.0±0.3
CDBLB_CAX Series
4.2±0.2
(in mm)
0.9±0.2
6.0±0.2
4.2±0.5
EIAJ
CODE
6.3 max.
MARKING
6.0 max.
3.0±0.3
0.15±0.05
1.0±0.3
1.5±0.3
0.5±0.1
4.2±0.2
0.9±0.2
0.5±0.2
CDBLB_CAY Series
(in mm)
Specified by Impedance Characteristics (Type 1)
Nominal Center
Frequency (fn)
(kHz)
Inclination of
Impedance Curve (1)
Inclination of
Impedance Curve (2)
Capacitance
(C)
IC
IC Maker
Type
CDBLB455KCAX02-B0
455
447.0±1.5kHz
(at |Z|=2.05kohm)
463.0±1.5kHz
(at |Z|=10.0kohm)
140pF±20%
TA8104F
TOSHIBA
Lead
CDBLB455KCAX31-B0
455
447.0±1.5kHz
(at |Z|=2.05kohm)
463.0±1.5kHz
(at |Z|=10.0kohm)
140pF±20%
TA31141
TOSHIBA
Lead
Part Number
17
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
52
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
c Impedance Curve
CDBLB455KCAX02-B0
CDBLB455KCAX31-B0
500K
500K
180
180
100K
100K
50K
50K
0
Impedance (Ω)
5K
Phase (deg)
Impedance (Ω)
10K
10K
5K
0
1K
1K
–90
–90
500
500
100
50
400
Phase (deg)
90
90
100
–180
420
440
460
480
50
400
500
–180
420
440
460
480
500
Frequency (kHz)
Frequency (kHz)
Specified by Impedance Characteristics (Type 2)
Nominal Center
Frequency (fn)
Anti-resonant
Frequency (Fa)
Delta F
(Fa-Fr)
Resonant
Resistance (R)
Capacitance
(C)
IC
IC Maker
Type
CDBKB455KCAX33-R0
-
462.0±1.5kHz
40±4.0kHz
200ohm max.
150pF±20%
CXA1474
SONY
SMD
CDBLB455KCAY03-B0
-
455.0±1.5kHz
46±5.0kHz
70ohm max.
550pF±20%
CXA1184M
SONY
Lead
CDBLB455KCAX15-B0
-
463.5±1.0kHz
43±2.0kHz
300ohm max.
140pF±20%
CXA1183M
SONY
Lead
CDBLB455KCAX25-B0
-
465.0±1.5kHz
45±4.0kHz
300ohm max.
135pF±20%
CXA1484
SONY
Lead
CDBLB455KCAX33-B0
-
465.0±1.5kHz
45±4.0kHz
300ohm max.
135pF±20%
CXA1474
SONY
Lead
Part Number
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Impedance Curve
CDBKB455KCAX33-R0
500K
CDBLB455KCAY03-B0
180
100K
180
50K
100K
50K
90
10K
90
0
0
1K
500
Phase (deg)
5K
Impedance (Ω)
10K
Phase (deg)
Impedance (Ω)
5K
1K
–90
500
–90
100
50
100
–180
50
400
420
440
460
Frequency (kHz)
480
–180
500
10
380
400
420
440
460
480
Frequency (kHz)
17
Continued on the following page.
53
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Continued from the preceding page.
c Impedance Curve
CDBLB455KCAX15-B0
CDBLB455KCAX25-B0
500K
500K
180
180
100K
100K
50K
50K
90
0
10K
0
5K
1K
1K
–90
500
500
100
50
390
100
–180
410
430
450
470
50
400
490
Frequency (kHz)
CDBLB455KCAX33-B0
180
100K
90
10K
5K
0
1K
500
–90
100
440
460
Frequency (kHz)
17
54
480
–180
500
Phase (deg)
Impedance (Ω)
50K
420
420
440
460
Frequency (kHz)
500K
50
400
–90
480
–180
500
Phase (deg)
5K
Impedance (Ω)
10K
Phase (deg)
Impedance (Ω)
90
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Specified by Recovered Audio Characteristics
Part Number
Nominal Center Recovered
Recovered Distortion
Frequency (fn) Audio 3dB BW Audio Output
(at fn)
(kHz)
(kHz)
(mV)
(%)
Distortion
(%)
IC
IC Maker
Type
TOSHIBA
SMD
CDBKB450KCAY79-R0
450
fn±3.0 min.
145 ±40
-
-
TB32302FG
CDBKB455KCAY07-R0
455
fn±4.0 min.
350 ±60
3.0 max.
-
MC3357
CDBKB455KCAY09-R0
455
fn±4.0 min.
120 ±40
1.5 max.
-
NE604N
PHILIPS
SMD
CDBKB455KCAY13-R0
455
fn±4.0 min.
330 ±50
4.0 max.
-
CXA1003BM
SONY
SMD
CDBKB455KCAY16-R0
455
fn±4.0 min.
175 ±40
2.0 max.
-
MC3372
CDBKB455KCAY24-R0
455
fn±4.0 min.
100 ±40
2.0 max.
-
TA31136
TOSHIBA
SMD
CDBKB455KCAY27-R0
455
fn±4.0 min.
90 ±30
2.0 max.
-
TK10487
TOKO
SMD
CDBKB455KCAY28-R0
455
fn±4.0 min.
40 ±20
3.0 max.
-
TA31142F
TOSHIBA
SMD
CDBKB455KCAY29-R0
455
fn±4.0 min.
100 ±30
2.5 max.
-
NE605
PHILIPS
SMD
CDBKB455KCAY35-R0
455
fn±4.0 min.
100 ±40
2.5 max.
-
TK10930
TOKO
SMD
CDBKB455KCAY40-R0
455
fn±4.0 min.
40 ±20
3.5 max.
-
TA31145
TOSHIBA
SMD
CDBKB455KCAY49-R0
455
fn±4.0 min.
45 ±10
3.0 max.
-
MC3361
CDBKB455KCAY50-R0
455
fn±4.0 min.
64 ±6.4
4.0 max.
-
CXA3117N
SONY
SMD
CDBKB455KCAY66-R0
455
fn±4.2 min.
40 ±10
4.0 max.
-
NJM2590
JRC
SMD
CDBKB455KCLX36-R0
455
fn±13.0 min.
90 ±30
2.5 max.
5.0 max.
NE(SA)606/NE(SA)616
[within fn ±6kHz]
PHILIPS
SMD
CDBKB455KCLX39-R0
455
fn±11.0 min.
130 ±20
2.5 max.
7.0 max.
[within fn ±8kHz]
NE607/NE617
PHILIPS
SMD
CDBKB455KCLY13-R0
455
fn±13.0 min.
120 ±30
1.5 max.
5.0 max.
[within fn ±8kHz]
CXA1003BM
SONY
SMD
CDBLB455KCAY07-B0
455
fn±4.0 min.
340 ±60
3.0 max.
-
MC3357
CDBLB455KCAY13A-B0
455
fn±4.0 min.
350 ±50
3.0 max.
-
CXA1003BM
SONY
Lead
CDBLB455KCAY24-B0
455
fn±4.0 min.
100 ±40
2.0 max.
-
TA31136
TOSHIBA
Lead
CDBLB455KCAY28-B0
455
fn±4.0 min.
40 ±20
3.0 max.
-
TA31142FN
TOSHIBA
Lead
CDBLB455KCAY34-B0
455
fn±4.0 min.
65 ±20
2.5 max.
-
MC13136
CDBLB455KCAY40-B0
455
fn±4.0 min.
40 ±20
3.0 max.
-
TA31145
TOSHIBA
Lead
CDBLB455KCAY42-B0
455
fn±4.0 min.
40 ±15
3.0 max.
-
TK14590/TK14591
TOKO
Lead
CDBLB455KCAY49-B0
455
fn±4.0 min.
45 ±10
3.0 max.
-
MC3361
CDBLB455KCAY50-B0
455
fn±4.0 min.
64 ±6.4
4.0 max.
-
CXA3117N
SONY
Lead
CDBLB455KCLY09-B0
455
fn±15.0 min.
70 ±20
1.5 max.
3.5 max.
[within fn ±8kHz]
NE604N
PHILIPS
Lead
MOTOROLA SMD
MOTOROLA SMD
MOTOROLA SMD
MOTOROLA Lead
MOTOROLA Lead
MOTOROLA Lead
Continued on the following page.
55
17
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Continued from the preceding page.
Nominal Center Recovered
Recovered Distortion
Frequency (fn) Audio 3dB BW Audio Output
(at fn)
(kHz)
(kHz)
(mV)
(%)
Part Number
Distortion
(%)
IC
IC Maker
Type
SONY
Lead
CDBLB455KCLY13-B0
455
fn±15.0 min.
110 ±30
1.5 max.
5.0 max.
[within fn ±8kHz]
CXA1003BM
CDBLB455KCAX16-B0
455
fn±4.0 min.
185 ±40
2.0 max.
-
MC3372
MOTOROLA Lead
CDBLB455KCAX18-B0
455
fn±3.0 min.
180 ±40
2.0 max.
-
MC3371
MOTOROLA Lead
CDBLB455KCAX36-B0
455
fn±3.5 min.
100 ±25
3.5 max.
-
NE606/NE616
PHILIPS
Lead
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
c Test Circuit
MC3357
NE604N
8.2k
IF input
AF output
15
14
1
2
3
13
12
11
10
9
6
0.1μ
7
8
0.1μ
MC3357
4
5
0.022μ
16
10μ
+
15
14
13
47k
12
0.1μ
11
10
9
6
7
8
NE604
C
50
Vcc
FM S. S. G.
(Rg = 50Ω)
0.01μ
0.01μ
16
0.1μ
10k
1
X
2
3
4
C
5
R
0.1μ
X
Vcc
Unit C: F
R: Ω
100p
1000p
Part Number (X)
C
R
CDBLB455KCAY07-B0
150pF
1.5kΩ
CDBKB455KCAY07-R0
150pF
1.3kΩ
Part Number (X)
C
R
L
–
CDBKB455KCAY09-R0 120pF 1.8kΩ
CDBLB455KCLY09-B0 120pF 560Ω 220μH
CXA1003BM
R
L
100p
+
47μ
0.01μ
AF output
Unit C: F
R: Ω
MC3372
IF input
L
0.01μ
0.01μ
0.01μ
0.01μ
0.01μ
X
0.01μ
23
22
21
20
19
18
17
16
15
14
16
15
14
5
6
7
0.01μ
8
9
10
11
12
0.01μ
2
3
4
11
10
Vcc
51k
68p
1.8k
220p
0.1μ
Unit C: F
R: Ω
C
R
CDBLB455KCAX16-B0
27pF
4.3kΩ
CDBKB455KCAY16-R0
100pF
1.0kΩ
TA31136
+
10μ
0.1μ
510k
X
C
8.2k
R
1μ
+
AF output
AF output
0.01μ
13
12
11
10
Vcc
(+2.0V)
3
Vcc 68p
220p
4
5
6
0.1μ
2
1
2
3
13
12
11
10
9
6
7
8
0.01μ
9
MC3371
1
14
7
8
X
Test condition
Vcc = +4.0V
R = 6.2kΩ
X: CDBLB455KCAX18-B0
TA31136F
+
10μ
4
5
0.1μ
14
15
0.01μ
15
16
0.1μ
16
17
Part Number (X)
FM S. S. G
51k
Unit C: F
R: Ω
R
(Rg = 50Ω)
RF input
0.01μ
X
0.01μ
AF output
Vcc
MC3371
51
9
5
6
7
8
0.1μ 51k C
12
100μ 100μ
Part Number (X)
C
R
L
CDBLB455KCAY13A-B0 82pF 1.2kΩ
–
–
CDBKB455KCAY13-R0 82pF 1.0kΩ
CDBLB455KCLY13-B0
82pF 560Ω 220μH
CDBKB455KCLY13-R0
13
MC3372
2700p
4
0.01μ
3
AF output
13
1
2
8.2k
0.01μ
CXA1003BM
1
510k
51k
0.01μ
C
24
0.1μ
51
R
Unit C: F
R: Ω
R
0.1μ
IF input
0.01μ
IF input
Unit C: F
R: Ω
Part Number (X)
C
R
CDBLB455KCAY24-B0
91pF
1.5kΩ
CDBKB455KCAY24-R0
91pF
1.2kΩ
Continued on the following page.
56
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Continued from the preceding page.
c Test Circuit
TK10487
TA31142
8.2k
17
1
2
3
4
16
15
14
13
12
11
7
8
9
10
C
20
TK10487
Vcc
X
0.01μ Vcc
19
1
18
2
17
3
+
10μ
R
16
4
15
+
10μ
Part Number (X)
C
R
CDBKB455KCAY27-R0
33pF
1.0kΩ
5
0.1μ
Unit C: F
R: Ω
2k
0.01μ
68k 68k
3300p
14
13
12
11
8
9
10
TA31142F
0.1μ
6
0.1μ
5
560p
0.01μ
68k
6
7
AF
output
+
0.1μ
18
10μ
19
2SC1048
0.01μ
20
Vcc
2.2μ
+
430
0.01μ
Vcc
0.01μ
C
X
+
10μ
IF input
NE605
Unit C: F
R: Ω
R
Part Number (X)
C
R
CDBLB455KCAY28-B0
22pF
3.3kΩ
CDBKB455KCAY28-R0
22pF
2.7kΩ
MC13136
IF input
AF input
0.01μ
0.1μ
0.1μ
20
19
18
17
16
15
14
13
12
X
0.15μ
1k
R
C
11
24
NE605
23
22
21
20
19
18
17
16
15
14
13
8
9
10
11
12
C
MC13136
5
6
7
8
+
22μ
100k
0.1μ
9
100k
22k
10
1
Vcc
2
3
4
5
6
7
0.1μ
4
X
R
0.01μ
3
100k 150p
2
5n
1
0.1μ
Vcc
+
0.1μ
0.01μ
0.1μ
0.1μ
0.1μ
Part Number (X)
CDBKB455KCAY29-R0
C
R
56pF
2.2kΩ
Unit C: F
R: Ω
AF output
IF input
Part Number (X)
C
R
CDBLB455KCAY34-B0
100pF
1.2kΩ
TK10930
Unit C: F
R: Ω
NE(SA)606/616
IF input
TK10930
Vcc
9
C
20
19
18
1
2
3
R2
8.2k
0.01μ
Vcc
0.1μ
0.1μ
IF input
R1
C
CDBKB455KCAY35-R0
16
15
2
3
4
5
6
22pF
4.7kΩ
–
CDBKB455KCLX36-R0
27pF
2.2kΩ
1mH
14
13
12
11
+
2.2μ
7
8
C
9
+10μ
1.5k
8.2k
0.01μ
0.01μ
7
8
9
10
C
20k
+
X
2.2μ
L
2k
8.2k
R
0.1μ
AF output
Unit C: F
R: Ω
0.1μ 0.1μ
430
20
19
10
17
1
X
L
2
3
4
+
10μ
R
C
R
L
CDBKB455KCLX39-R0
22pF
2.7kΩ
1mH
15
14
13
12
11
5
6
9
10
0.01μ
68k
7
8
+
X
0.1μ
AF output
Part Number (X)
16
R
+
0.1μ
0.1μ
18
3300p
TA31145 (TOSHIBA)
22k
Vcc
11
TA31145
NE607/617 (PHILIPS)
1
12
L
100k
17
13
0.1μ
CDBLB455KCAX36-B0
1.0kΩ
100k
18
0.1μ
R
0.1μ
19
6
C
0.1μ
20
14
Vcc
0.01μ
51
5
Part Number (X)
NE(SA)607/617
IF input
15
R2
2.0kΩ
33pF
16
4
+
2.2μ
Unit C: F
R: Ω
Part Number (X)
17
NE606 or NE616
X
R1
+
10μ
AF
output
10 11 12
0.1μ
IF input
Unit C: F
R: Ω
L: H
AF output
5600p
8
68k
7
68k
6
1000p
5
560p
4
10μ
3
0.1μ
2
0.1μ
1
0.01μ
0.1μ
24 23 22 21 20 19 18 17 16 15 14 13
17
Unit C: F
R: Ω
Part Number (X)
R
CDBLB455KCAY40-B0
3.3kΩ
CDBKB455KCAY40-R0
2.7kΩ
Continued on the following page.
57
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Continued from the preceding page.
c Test Circuit
TK14590/14591
MC3361
Vcc
(1.3V)
AF output
0.01μ
100k
1μ
100k
0.01μ
100p
0.15μ
0.1μ 1000p
0.1μ
24 23 22 21 20 19 18 17 16 15 14 13
16
TK14590V (TOKO)
5
6
0.1μ
7
8
X
IF input
1k
14
13
12
11 10
9
6
8
MC3361
1
2
3
4
5
7
0.01μ
Unit C: F
R: Ω
560p
100k
0.0033μ
R
15
AF
output
8.2k
9 10 11 12
C
100k
4
0.01μ
100k
3
0.1μ
2
0.1μ
1
100k
150k
Vcc
0.1μ 0.1μ
22
47μ
0.01μ 1μ
X
0.1μ
0.022μ
Part Number (X)
C
R
CDBLB455KCAY42-B0
22pF
3.3kΩ
IF input
CXA3117
Unit C: F
R: Ω
R
Part Number (X)
R
CDBLB455KCAY49-B0
1.8kΩ
CDBKB455KCAY49-R0
1.5kΩ
NJM2590
Vcc
+
100k
AF out
24 23 22 21 20 19 18 17 16 15 14 13
100k
10μ
14
13
12
11
10
9
8
CXA3117(SONY)
1
2
3
4
5
6
7
8
1μ
Vcc
X
33μ
1200p
NJM2590(JRC)
9 10 11 12
1
1200p
1200p
Unit C: F
R: Ω
R
0.01μ
Part Number (X)
R
CDBLB455KCAY50-B0
8.2kΩ
CDBKB455KCAY50-R0
6.2kΩ
S.G.
2
5
4
3
6
0.1μ
0.1μ
10k
R
51
7
X
+
10μ
Unit C: F
R: Ω
0.01μ
Part Number (X)
R
CDBKB455KCAY66-R0
3.0kΩ
AF output
c Recovered Audio Curve
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
5
0.5
1
0.1
10
1.0
5
0.5
1
0.1
440
450
460
Frequency (kHz)
470
AF Output Voltage (mV)
500
440
450
460
T.H.D. (%)
CDBLB455KCAY07-B0
T.H.D. (%)
AF Output Voltage (mV)
CDBKB455KCAY07-R0
470
Frequency (kHz)
Continued on the following page.
17
58
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Continued from the preceding page.
c Recovered Audio Curve
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
460
470
395
Frequency (kHz)
515
CDBKB455KCLY13-R0
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
440
450
460
AF Output Voltage (mV)
500
T.H.D. (%)
AF Output Voltage (mV)
475
Frequency (kHz)
CDBKB455KCAY13-R0
470
425
Frequency (kHz)
465
485
CDBLB455KCLY13-B0
500
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
AF Output Voltage (mV)
50.0
T.H.D. (%)
500
445
Frequency (kHz)
CDBLB455KCAY13A-B0
AF Output Voltage (mV)
435
T.H.D. (%)
450
50.0
T.H.D. (%)
440
AF Output Voltage (mV)
500
T.H.D. (%)
CDBLB455KCLY09-B0
T.H.D. (%)
AF Output Voltage (mV)
CDBKB455KCAY09-R0
17
440
450
460
Frequency (kHz)
470
395
435
475
515
Frequency (kHz)
Continued on the following page.
59
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Continued from the preceding page.
c Recovered Audio Curve
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
460
470
440
Frequency (kHz)
470
CDBKB455KCAY24-R0
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
440
450
460
AF Output Voltage (mV)
500
T.H.D. (%)
AF Output Voltage (mV)
460
Frequency (kHz)
CDBLB455KCAX18-B0
470
440
Frequency (kHz)
450
460
470
Frequency (kHz)
CDBLB455KCAY24-B0
CDBKB455KCAY27-R0
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
AF Output Voltage (mV)
500
T.H.D. (%)
AF Output Voltage (mV)
450
T.H.D. (%)
450
T.H.D. (%)
440
AF Output Voltage (mV)
500
T.H.D. (%)
CDBLB455KCAX16-B0
T.H.D. (%)
AF Output Voltage (mV)
CDBKB455KCAY16-R0
17
440
450
460
Frequency (kHz)
470
440
450
460
470
Frequency (kHz)
Continued on the following page.
60
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Continued from the preceding page.
c Recovered Audio Curve
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
460
470
440
450
Frequency (kHz)
470
CDBLB455KCAY34-B0
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
440
450
460
AF Output Voltage (mV)
500
T.H.D. (%)
AF Output Voltage (mV)
CDBKB455KCAY29-R0
470
440
450
Frequency (kHz)
10.0
50
5.0
10
1.0
5
0.5
1
0.1
460
Frequency (kHz)
470
10
100
AF Output Voltage (mV)
100
50
500
T.H.D. (%)
50.0
450
470
CDBKB455KCLX36-R0
500
440
460
Frequency (kHz)
CDBKB455KCAY35-R0
AF Output Voltage (mV)
460
Frequency (kHz)
T.H.D. (%)
450
5
50
1
10
5
0.5
1
0.1
425
445
465
T.H.D. (%)
440
AF Output Voltage (mV)
500
T.H.D. (%)
CDBLB455KCAY28-B0
T.H.D. (%)
AF Output Voltage (mV)
CDBKB455KCAY28-R0
17
486
Frequency (kHz)
Continued on the following page.
61
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Continued from the preceding page.
c Recovered Audio Curve
50.0
100
10.0
50
5.0
10
1.0
5
0.5
1
0.1
500
50.0
100
10.0
50
5.0
10
1.0
5
0.5
1
0.1
425
460
470
CDBKB455KCAY40-R0
485
CDBLB455KCAY40-B0
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
440
450
460
AF Output Voltage (mV)
500
T.H.D. (%)
AF Output Voltage (mV)
465
Frequency (kHz)
Frequency (kHz)
470
440
Frequency (kHz)
10.0
50
5.0
10
1.0
5
0.5
1
0.1
17
AF Output Voltage (mV)
100
T.H.D. (%)
50.0
460
Frequency (kHz)
470
500
50.0
100
10.0
50
5.0
10
1.0
5
0.5
1
0.1
440
450
460
CDBKB455KCAY49-R0
500
440
450
Frequency (kHz)
CDBLB455KCAY42-B0
AF Output Voltage (mV)
445
T.H.D. (%)
450
470
450
460
T.H.D. (%)
440
T.H.D. (%)
500
AF Output Voltage (mV)
CDBKB455KCLX39-R0
T.H.D. (%)
AF Output Voltage (mV)
CDBLB455KCAX36-B0
470
Frequency (kHz)
Continued on the following page.
62
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Continued from the preceding page.
c Recovered Audio Curve
50.0
500
50.0
100
10.0
100
10.0
50
5.0
50
5.0
10
1.0
10
1.0
5
0.5
5
0.5
1
0.1
1
0.1
450
460
470
440
Frequency (kHz)
100
10.0
50
5.0
10
1.0
5
0.5
1
0.1
460
AF Output Voltage (mV)
50.0
T.H.D. (%)
AF Output Voltage (mV)
470
CDBKB455KCAY66-R0
500
450
460
Frequency (kHz)
CDBLB455KCAY50-B0
440
450
500
50.0
100
10.0
50
5.0
10
1.0
5
0.5
1
0.1
440
470
450
460
T.H.D. (%)
440
AF Output Voltage (mV)
500
T.H.D. (%)
CDBKB455KCAY50-R0
T.H.D. (%)
AF Output Voltage (mV)
CDBLB455KCAY49-B0
470
Frequency (kHz)
Frequency (kHz)
Specified by S Curve Characteristics
Part Number
CDBKB455KCAY54-R0
Nominal Center
Frequency (fn)
(kHz)
S Curve (1)
Output Volt. at fn
(mV)
S Curve (2)
at fn±4.8kHz
(mV)
IC
IC Maker
Type
455
165 ±20
170 ±20
TA31149
TOSHIBA
SMD
17
63
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Test Circuit
c S Curve
TA31149
CDBKB455KCAY54-R0
24
23
22
21
10μ
+
100k
430
20 19
1000p
Vcc Vcc Vcc
100k
+
0.4
100k
2.2μ
Vcc (+1.4V)
18
17
16
15
14
13
0.3
TA31149(TOSHIBA)
IF
input
8
9
10
11 12
X
R
0.1μ
Volt (V)
7
+
AF output
6
1000p
5
1200p
4
1500p
3
10μ
2
0.1μ
1
0.2
Unit C: F
R: Ω
Part Number (X)
R
CDBKB455KCAY54-R0
2.7kΩ
0.1
0.0
440
450
460
Frequency (kHz)
17
64
470
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Discriminators for Communications Equipment
0.3±0.2
MHz Type Ceramic Discriminators
0.2±0.2
0.4±0.05
1.0 max.
4.1 max.
0.4(ref.)
c Features
0.4(ref.)
0.8±0.1
1. Compact and high reliability and recommended for
automotive applications.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be
obtained without adjustment.
4. Stable temperature characteristics
5. Available lead (Pb) free solder reflow.
1.4 max.
4.5±0.1
2.0±0.1
CDSCB10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in a wide
bandwidth.
They have 1.0mm max. thickness and small mounting area
(4.5x2.0mm).
0.8±0.1
CDSCB Series
1.5±0.1
1.5±0.1
(in mm)
Center
Frequency (fo)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(%)
S Curve
(mV)
IC
CDSCB10M7GA105A-R0
10.700 ±30kHz
220 min.
110 min.
1.5 max.
-
TEA5757HL
CDSCB10M7GA113-R0
10.700 ±30kHz
300 min.
110 min.
1.0 max.
-
TA2154FN
CDSCB10M7GA119-R0
10.700 ±30kHz
500 min.
75 min.
1.0 max.
-
TRF6901
CDSCB10M7GA121-R0
10.700 ±30kHz
390 min.
80 min.
1.0 max.
-
LV23100V
CDSCB10M7GA135-R0
10.700 ±30kHz
155 min.
75 min.
-
-
TH71101
CDSCB10M7GA136-R0
10.700 ±30kHz
140 min.
120 min.
-
-
TH7122
CDSCB10M7GF072-R0
10.700 (fn)
fn±150 min.
130 min.
2.0 max.
-
TA31161
CDSCB10M7GF107S-R0
10.700 (fn)
fn±80 min.
52 min.
3.0 max.
-
TA31272FN
CDSCB10M7GF109-R0
10.700 (fn)
fn±100 min.
170 min.
3.0 max.
-
TK14588V
CDSCB10M7GF123-R0
10.700 (fn)
-
-
-
900 min.
TA31275FN
CDSCB10M7GF123S-R0
10.700 (fn)
-
-
-
900 min.
TA31275FN
CDSCB10M7GF126-R0
10.700 (fn)
-
-
-
400 min.
NJM2295AV
Part Number
(fn) means nominal center frequency.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
For safety purposes, avoid applying a direct current between the terminals.
18
65
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
c Test Circuit
CDSCB10M7GA105A-R0
CDSCB10M7GA113-R0
Vcc (1.2V)
35
3
34
4
33
5
32
6
31
TEA5757HL
(PHILIPS)
7
100k
29
28
0.01μ
27
26
25
8
29
9
28
10
27
11
26
24
23
22
21
20
19
18
17
16
11
12
13
14
15
TA2154FN (TOSHIBA)
1
2
3
4
5
6
7
8
9
10
+
X
30
12
DC OUT
30
S.S.G.
2.2μ
680p
2
0.01μ
+
100μ
0.01μ
10μ
+
48 47 46 45 44 43 42 41 40 39 38 37
0.1μ
1
36
0.01μ
0.1μ
0.01μ
Vcc (3.0V)
D.C. OUT
AF OUT
X: CDSCB10M7GA113-R0
Unit C: F
R: Ω
S.S.G.
10
25
0.47μ
0.1μ
+
X
AFC (n)
0.22μ
150
AF OUT
X: CDSCB10M7GA105A-R0
Unit C: F
R: Ω
CDSCB10M7GA119-R0
CDSCB10M7GA121-R0
Vcc (3.0V)
IF Input
4.7μ
10p
36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19
LV23100V (SANYO)
35
3
34
32
6
TRF6901
31
7
(TEXAS INSTRUMENTS)
30
8
29
9
28
4
5
+
11
26
12
25
13 14 15 16 17 18 19 20 21 22 23 24
0.01μ
7
8
0.047μ
9 10 11 12 13 14 15 16 17 18
+
47p
+
0.47μ
0.01μ
27
100p 10
6
10k
5
3
10k
10μ
1000p
33
4
2
X
2
1
X
1μ
48 47 46 45 44 43 42 41 40 39 38 37
36
3.3k
0.1μ
+
1μ
0.22μ
0.47μ
0.047μ
+
S.G.
100p
10k
100μ
1
75
0.01μ
0.015μ
22μ+
82p
10
+
PIC16F84 (Control IC)
PIC16F84
1
2
3
4
5
1k
6
7
1
8
2
3
4
5
6
7
8
9
9
X: CDSCB10M7GA119-R0
Unit C : F
R: Ω
L: H
10k
+
2.2μ
10k
18 17 16 15 14 13 12 11 10
18 17 16 15 14 13 12 11 10
0.1μ
1k
2.2μ
X: CDSCB10M7GA121-R0
CDSCB10M7GA135-R0
+
10k
0.1μ
Unit C: F
R: Ω
CDSCB10M7GA136-R0
Vcc (5.0V)
Vcc (5.0V)
AF-OUT
FKS-OUT
330p
0.1μ
0.1μ
24
23
22
21
20
19
18
17
25
16
26
100p
1000p
0.01μ
0.01μ
330k
15
27
28
220k
29
14
TH7122
[Internal AFC Enabled]
(MELEXIS)
30
0.01μ
24
23
22
21
20
19
18
17
25
26
15
27
14
31
10
12p C.D.
29
0.01μ
0.01μ
2
3
4
5
6
7
8
0.1μ
FKS-OUT
330p
AF-OUT
330p
13
100k
0.033μ
12
S.G.
1000p
30
330p
0.01μ
9
1
1000p
TH71101, TH71102,
TH71111 or TH71112
(MELEXIS)
28
12
32
16
330p
13
11
0.01μ
11
C.D.
3.3k
0.01μ
31
10
330p
0.01μ
32
9
1
2
3
4
5
6
7
100k
8
18
0.01μ
18
10p
220k
15p
120p
Vcc (3.2V)
0.01μ
0.047μ
0.01μ
D.C. Output
AF Output
68p
0.01μ
0.01μ
AF Output
100p
4.7μ
AFC (p)
330p
0.1μ
13 14 15 16 17 18 19 20 21 22 23 24
S.G.
X: CDSCB10M7GA135-R0
330p
Unit C: F
R: Ω
16
15
100p
14
13
12
11
10
PIC16F84 (Control IC)
1
+
10μ
17
2
3
4
5
6
1k
7
10k
+
2.2μ
8
9
X: CDSCB10M7GA136-R0
0.1μ
Unit C: F
R: Ω
Continued on the following page.
66
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Continued from the preceding page.
c Test Circuit
CDSCB10M7GF072-R0
CDSCB10M7GF107S-R0
Vcc (5.0V)
Vcc (3V)
AF Output
24
2
13
20
19
18
1
12
11
10
2
3
4
5
6
7
9
X: CDSCB10M7GF072-R0
R: 820
Unit C: F
R: Ω
L: H
+
13
0.01μ
IF IN
10
11
12
C.D.: Ceramic Discriminator
Unit R: Ω
C: F
L: H
CDSCB10M7GF123-R0
Vcc (5.0V)
0.01μ
AF OUT
1000p
1.2μ
R
24
X
D.C. OUT
1
12
10
9
7
8
20
19
2
3
4
5
18
6
0.01μ
0.01μ
11
0.1μ
13
21
17
16
15
14
13
10
11
12
TA31275FN (TOSHIBA)
8p
51k
22
AF OUT
0.01μ
1000p
23
0.01μ
DC-OUT
3300p
Vcc (3V)
14
C.D.
0.01μ
S.S.G.
CDSCB10M7GF109-R0
12k
9
7
8
9
0.1μ
33μ
15
14
0.01μ
0.01μ
16
15
8
0.1μ
7
0.1μ
6
8
0.01μ
5
0.01μ
4
0.01μ
16
0.01μ
TA31161 (TOSHIBA)
3
17
1.2k
1
14
21
0.01μ
15
22
TA31272FN (TOSHIBA)
10p
16
23
X
1000p
R
0.01μ
1.8k
AF OUT
0.01μ
0.01μ
100μ
+
4.7μ
0.01μ
0.01μ
4
5
6
+
S.S.G.
4.7μ
3
S.S.G.
X: CDSCB10M7GF123-R0
Unit C: F
R: Ω
0.01μ
2
0.01μ
0.01μ
1
51
0.01μ
TK14588V (TOKO)
X: CDSCB10M7GF109-R0
R: 820
Unit C: F
R: Ω
L: H
CDSCB10M7GF126-R0
DC-OUT
20
100p
0.01μ
+
0.01μ
19
18
17
16
15
14
13
12
8
9
11
NJM2295AV (JRC)
4
5
6
7
+
10μ
10
8p
C.D.
180
10μ+
3
0.01μ
2
0.01μ
1
10μ+
10μ
Vcc (5.0V)
X: CDSCB10M7GF126-R0
S.G.
Unit C: F
R: Ω
18
67
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
c Recovered Audio Curve
CDSCB10M7GA105A-R0
1000
CDSCB10M7GA113-R0
100
1000
10
100
100
AF Output
1
1
10
Distortion
10
1
1
0.1
T.H.D. (%)
10
T.H.D. (%)
AF Output Voltage (mV)
Distortion
AF Output Voltage (mV)
AF Output
100
0.1
Input = 100dBμ
fdev. = ±75kHz
fmod. = 1kHz
Vcc = 3.0V
10.4
10.5
10.6
10.7
10.8
10.9
11.0
11.1
10.3
10.4
10.5
Frequency (MHz)
10.6
CDSCB10M7GA119-R0
1000
10.8
10.9
11.0
11.1
CDSCB10M7GA121-R0
100
1000
10
100
100
AF Output
1
1
T.H.D. (%)
Distortion
10
AF Output Voltage (mV)
AF Output
100
AF Output Voltage (mV)
10.7
Frequency (MHz)
10
Distortion
10
1
1
0.1
0.1
Input = 100dBμ
fdev. = ±75kHz
fmod. = 1kHz
Vcc = 3.2V
Input = 100dBμ
fdev. = ±60kHz
fmod. = 1kHz
Vcc = 3.0V
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
10.3
11.1
10.4
10.6
10.7
10.8
10.9
11.0
11.1
CDSCB10M7GA136-R0
1000
100
100
AF Output Voltage (mV)
AF Output Voltage (mV)
CDSCB10M7GA135-R0
1000
10
1
0.1
10.4
10.5
Frequency (MHz)
Frequency (MHz)
18
T.H.D. (%)
10.3
Input = 100dBμ
fdev. = ±75kHz
fmod. = 1kHz
Vcc = 1.2V
10
1
Input = 100dBμ
fdev. = ±50kHz
fmod. = 1kHz
Vcc = 5.0V
10.5
10.6
10.7
10.8
Frequency (MHz)
10.9
11.0
0.1
10.4
Input = 100dBμ
fdev. = ±50kHz
fmod. = 1kHz
Vcc = 5.0V
10.5
10.6
10.7
10.8
10.9
11.0
Frequency (MHz)
Continued on the following page.
68
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Continued from the preceding page.
c Recovered Audio Curve
CDSCB10M7GF072-R0
CDSCB10M7GF109-R0
100
10
100
10
10
1
10
1
1
0.1
0.1
1
Input = 100dBμ
fdev. = ±80kHz
fmod. = 1kHz
Vcc = 3.0V
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
T.H.D. (%)
100
AF Output Voltage (mV)
1000
T.H.D. (%)
100
AF Output Voltage (mV)
1000
Input = 100dBμ
fdev. = ±64kHz
fmod. = 1kHz
Vcc = 3.0V
11.1
10.3
10.4 10.5
Frequency (MHz)
10.6
10.7
10.8
10.9
11.0
11.1
Frequency (MHz)
c S Curve
CDSCB10M7GF123-R0
CDSCB10M7GF126-R0
4.0
2.5
2.0
3.0
Volt (V)
Volt (V)
1.5
1.0
2.0
0.5
0.0
10.3
10.4
10.5
10.6
10.7
10.8
Frequency (MHz)
10.9
11.0
11.1
1.0
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
11.1
Frequency (MHz)
18
69
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Ceramic Discriminators Notice
c CDBKB Series Notice (Soldering and Mounting)
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Peak
(260°C max.)
Temperature (°C)
260
230
Heating
(230°C)
Pre-heating
100
(150-180°C)
30 sec.
min.
60-120 sec.
Gradual
Cooling
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
2. Wash
(1) Cleaning Solvent
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
Water (Demineralized Water), Cleaning Water Solution
(Cleanthrough-750H, Pine Alpha 100S), Silicon
(Technocare FRW)
(2) Cleaning Conditions
o Immersion Wash
2 minutes max. in above solvent at +60°C max.
o Shower or Rinse Wash
2 minutes max. in above solvent at +60°C max.
(3) Notice
o When components are immersed in solvent, be sure to
maintain the temperature of components below the
temperature of solvent.
o Please do not use ultrasonic cleaning.
o Total washing time should be within 4 minutes.
o Please ensure the component is thoroughly evaluated
in your application circuit.
o Please do not use chlorine, petroleum or alkaline
cleaning solvents.
o If you plan to use any other type of solvents, please
consult with Murata or Murata representative prior to
using.
c CDBKB Series Notice (Handling)
1. The component will be damaged when an excessive
stress is applied.
2. If the component is cleaned, please confirm
that the reliability has not been degraded.
3. In case of covering filter with over coating,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
4. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
5. The product, packed in a moisture-proof bag (dry
pack), is sensitive to moisture.
The following treatment is required before
applying reflow soldering, to avoid package
cracks or reliability degradation caused by
thermal stress. When unpacked, store the component
in an atmosphere of below 25 degrees C. and below
65%R.H., and solder within 48 hours.
Continued on the following page.
70
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Discriminators Notice
Continued from the preceding page.
c CDBLB Series Notice (Handling)
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component will be damaged when an excessive
stress is applied.
3. No type of reflow soldering should be applied to this
component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
6. In case of covering discriminator with over coating,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
71
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Ceramic Discriminators Notice
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Temperature (°C)
c CDSCB Series Notice
o Soldering and Mounting
Peak
(260°C max.)
260
230
Pre-heating
(150-180°C)
100
Heating
(230°C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +300±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(3) Condition for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent the electrode erosion.
[Component Direction]
Place the
component
laterally to the
direction in
which stress
acts.
[Component Layout Close to Board]
Perforation B
A
Slit
C
Susceptibility to
stress is in the order
of : A>C>B
Continued on the following page.
72
P05E.pdf
Nov.24,2011
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Discriminators Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, avoid applying a direct current
between the terminals.
73
P05E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Nov.24,2011
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
c Standard Land Pattern Dimensions
CDBKB Series
2.6
3.0
1.2
4.9
2.6
2.0
1.2
CDSCB Series
1.0
2.0
1.0
(in mm)
(in mm)
c Minimum Quantity
Part Number
Taping ø180mm
Bulk
500
CDBKB Series
CDBLB Series
500
CDSCB Series
2000
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
c CDBKB Series
Dimensions of Carrier Tape
1.75±0.1
8.0±0.1
3° max.
User direction of feed
Cover film
(ø180 +0
-3.0)
(ø60 +1.0
-0 )
Empty
7.2±0.1
ø1.5 +0.1
-0.0
7.5±0.1
2.0±0.1
Trailer
160 to 190
16.0±0.15
4.0±0.1
Dimensions of Reel
Leader
Cover film
Components
2.0±0.2
ø13.0±0.5
Empty
160 to 200
400 to 560
3.3±0.1
17.0±0.3
19.4±1.0
6.3±0.1
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UP
(in mm)
Continued on the following page.
74
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
Continued from the preceding page.
c CDSCB Series
$IMENSIONS OF #ARRIER 4APE
ø1.5
2.0±0.05
1.75±0.1
4.0±0.1
Dimension of reel
+0.1
-0
4RAILER
160 to 190
,EADER
Cover film
10°
Cover film
(3°)
User direction of feed
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UP
400 to 560
180 +0.1
-1.5
+0.1
60 -0
12.0±0.2
ø13.0±0.2
%MPTY
240 to 280
2.0±0.5
MAX
2.2±0.1
1.1±0.1
4.7±0.1
+0.1
ø1.5 -0
0.3±0.05
(9.0)
4.0±0.1
0EELING STRENGTH
0.1 to 0.7N
5.5±0.05
%MPTY #OMPONENTS
+1.0
13.0 -0
17.0±1.0
(
): Reference
(in mm)
75
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P05E.pdf
Nov.24,2011
Similar pages