RF CGR-0218Z Push-pull 5mhz to 210mhz high linearity ingap hbt amplifier Datasheet

CGR-0218Z
CGR-0218Z
Push-Pull
5MHz to
210 MHz High
Linearity
InGaP HBT
Amplifier
PUSH-PULL 5MHz to 210MHz HIGH
LINEARITY InGaP HBT AMPLIFIER
Package: SOIC-8
Product Description
Features
RFMD’s CGR-0218Z is a high performance InGaP HBT MMIC Amplifier designed
with the InGaP process technology for excellent reliability. A Darlington configuration is utilized for broadband performance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. The CGR-0218Z
contains two amplifiers for use in wideband push-pull CATV amplifiers requiring
excellent second order performance. The second and third order non-linearities are
greatly improved in the push-pull configuration.





Optimum Technology
Matching® Applied
Amplifier Configuration
GaAs HBT

5V Single Supply
Excellent Linearity
Two Amplifiers in Each SOIC-8
Package Simplify Push-Pull
PC Board Layout
SOIC-8 Package
Available in Lead-Free, RoHS
Compliant Packaging
Applications
GaAs MESFET
InGaP HBT
1
SiGe BiCMOS

8

Si BiCMOS
SiGe HBT
2
7
3
6
4
5

CATV Head Ends
CATV Line Drivers
DOCSIS Cable Modems
GaAs pHEMT
Si CMOS
Si BJT
GaN HEMT
InP HBT
RF MEMS
LDMOS
Parameter
Small Signal Gain
Gain Flatness
OIP3
Min.
Specification
Typ.
17.3
±0.2
42
Max.
Unit
Condition
dB
dB
dBm
5MHz to 210MHz
5MHz to 210MHz
5MHz to 210MHz, Tone Spacing=1MHz, POUT per
tone=+6dBm
5MHz to 210MHz
5MHz to 210MHz
5MHz to 210MHz
5MHz to 210MHz
P1dB
23
dBm
Input Return Loss
22
dB
Output Return Loss
22
dB
Noise Figure, Balun Insertion Loss
4.0
dB
Included
CSO
80
dBc
CTB
67
dBc
XMOD
66
dBc
Device Operating Voltage
5.0
V
Device Operating Current
217
mA
Thermal Resistance (Junction to
30
°C/W
Lead)
Test Conditions: VCC =5V, ID =217mA Typ., TL =25°C, ZS =ZL =75, Push Pull Application Circuit
7 Ch, Flat Tilt, +50dBmV
7 Ch, Flat Tilt, +50dBmV
7 Ch, Flat Tilt, +50dBmV
5V VCC
Junction to case slug
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc.
DS091015
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
1 of 8
CGR-0218Z
Absolute Maximum Ratings
Parameter
Rating
Unit
mA
Max Device Current (ID)
300
Max Device Voltage (VD)
6.0
V
Max RF Input Power
18
dBm
Max Junction Temp (TJ)
150
°C
-40 to +85
°C
Max Storage Temp
150
°C
Min Storage Temp
-40
°C
Operating Temp Range (TL)
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice.
Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not
exceed the maximum operating values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
IDVD <(TJ -TL)/RTH, j-l and TL =TLEAD
Input Return Loss
Output Return Loss
30
35
25
30
25
20
dB
20
15
dB
15
10
10
5
5
0
0
0
50
100
150
200
250
0
50
100
Frequency
Gain
200
250
200
250
Reverse Isolation
20
25
16
20
12
15
dB
dB
8
10
4
5
0
0
50
100
150
Frequency
2 of 8
150
Frequency
200
250
0
0
50
100
150
Frequency
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
DS091015
CGR-0218Z
Output P1dB
Noise Figure
5
25
4
20
3
15
dB
dBm
2
10
1
5
0
0
0
50
100
150
200
250
0
50
100
Frequency
150
200
250
Frequency
Output IP3
XMOD
50
80
70
40
60
50
30
dBc
dBm
20
40
30
20
10
10
0
0
0
50
100
150
200
250
0
5
10
15
Frequency
20
25
30
35
40
45
50
30
35
40
45
50
Frequency
CTB
CSO
100
80
90
70
80
60
70
50
60
dBc
dBc
50
40
40
30
30
20
20
10
10
0
0
0
5
10
15
20
25
Frequency
DS091015
30
35
40
45
50
0
5
10
15
20
25
Frequency
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
3 of 8
CGR-0218Z
Evaluation Board Schematic
JP 2
VDD
C16
10 uF
C15
0 .1 u F
C14
1 .0 u F
JP 1
GND
J1
IN
C4
0 .1 u F
C13
68 pF
R2
470 ohm
L3
10 uH
C2
0 .1 u F
R3
0 ohm
1
T1
X F M -0 2 0 1 -1 W H
2
U1
CGR0218Z
7
3
6
4
5
T2
X F M -0 2 0 1 -1 W H
C1
0 .1 u F
C3
0 .1 u F
C7
10 uF
J2
OUT
C5
0 .1 u F
JP 4
GND
JP 3
VDD
C6
0 .1 u F
8
C8
0 .1 u F
C9
1 .0 u F
R1
470 ohm
L2
10 uH
C10
68 pF
Evaluation Board Layout
U1
4 of 8
Value
QTY
68pF
2
Location
C10, C13
0.1uF
8
C1, C2, C3, C4, C5, C6, C8, C15
1.0uF
2
C9, C14
10uF
2
C7, C10
0
1
R3
470
2
R1, R2
10uH
2
L2, L3
RFMD™ XFM-0201-1WH
2
T1, T2
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
DS091015
CGR-0218Z
Pin
1
2, 3,
6, 7
4
5
8
EPAD
Function
RF IN
GND
RF IN
RF OUT/VCC
RF OUT/VCC
GND
Description
RF input pin. External DC blocking capacitor is required.
Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground leads as
possible.
Same as pin 1.
RF output and bias pin (open collector).
Same as pin 5.
Exposed area on the bottom side of the package must be soldered to the ground plane of the board for optimum
thermal and RF performance. Several vias should be located under the EPAD as shown in the recommended
land pattern.
Pin Out
Amplifier Configuration
DS091015
1
8
2
7
3
6
4
5
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
5 of 8
CGR-0218Z
Suggested Pad Layout
Package Drawing and Marking
Package Type: SOIC-8
Dimensions in inches (millimeters)
Refer to drawing posted at www.rfmd.com for tolerances.
TOP VIEW
8
7
PACKAGE TYPE:
ESOP-8
BOTTOM VIEW
6
5
Lot Code
CGA6618
.155 [3.937]
.112
[2.85]
.236 [5.994]
.088 [2.25]
EXPOSED PAD
1
2
3
4
.061 [1.549]
.194 [4.93]
.050 [1.27]
.016 [.406]
.061 [1.549]
.058 [1.473]
.008
.008 [.203]
.194 [4.928]
.003 [.076]
SIDE VIEW
6 of 8
DETAIL A
.013 [.33] x 45°
PARTING LINE
.155 [3.937]
SEATING PLANE
SEE DETAIL A
END VIEW
.025
5°
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
DS091015
CGR-0218Z
Ordering Information
DS091015
Part Number
Description
Reel Size (in.)
Devices/Reel
CGR0218ZSB
CGR0218ZSQ
CGR0218ZSR
CGR0218ZTR7
CGR0218ZTR13
CGR0218PCBA-410
5pcs Sample Bag
25pcs Sample Bag
Lead Free, RoHS Compliant
Lead Free, RoHS Compliant
Lead Free, RoHS Compliant
5MHz to 210MHz Evaluation Board
NA
NA
7
7
13
NA
NA
NA
100
750
2500
NA
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
7 of 8
CGR-0218Z
8 of 8
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
DS091015
Similar pages