UMS CHM1190-99F/00 K band mixer Datasheet

CHM1190
K Band Mixer
GaAs Monolithic Microwave IC
Description
Main Features
■ 22-24 GHz LO frequency range
■ IF from 1 to 3 GHz
■ Low conversion loss up & down
■ High LO/RF isolation
■ Low LO input power
■ Small chip size: 1.73 x 1.53 x 0.10 mm
LO
IF
RF
-2
IF=2GHz
Conversion gain (dB)
The CHM1190 is a balanced Schottky
diode mixer based on a six quarter wave
ring structure. It could be use in receiver or
transmitter part.
This circuit is manufactured with the BESMMIC process: 1 µm Schottky diode
device, air bridges, via holes through the
substrate, stepper lithography.
An electrically identical chip with a mirror
drawing versus de LO side is available
under the part number CHM1191. These
two MMICs could be helpful in a TX, RX
architecture module.
It is available in chip form.
-4
-6
-8
-10
-12
21
22
23
24
LO Frequency (GHz)
Typical conversion characteristic
(measurement in test fixture)
Main Characteristics
Tamb. = 25°C
Symbol
Parameter
Typ
Unit
F_LO,
LO frequency range
22-24
GHz
F_IF
IF frequency range
1-3
GHz
Conversion loss @ P-LO = 7dBm
7
dB
LO/RF isolation
30
dBc
Lc
I_LO/RF
ESD Protection : Electrostatic discharge sensitive device. Observe handling precautions !
Ref. :DSCHM11909025
1/6
Specifications subject to change without notice
United Monolithic Semiconductors S.A.S.
Route Départementale 128 - B.P.46 - 91401 Orsay Cedex France
Tel. : +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
25
K band Mixer
CHM1190
Electrical Characteristics
Tamb. = 25°C
Symbol
Parameter
Min
Typ
Max
Unit
F_LO
LO frequency range
22
24
GHz
F_IF
IF frequency range
1
3
GHz
Lc
Conversion loss @ P-LO = 7dBm (1)
P_LO
LO input power
P-1dB
Input 1dB compression
7
5
dB
7
9
7
dBm
VSWR_LO
LO port VSWR (50Ω) (2)
2.5:1
VSWR_RF
RF port VSWR (50Ω) (2)
2.5:1
VSWR_IF
RF port VSWR (50Ω) (2)
2.5:1
I_LO/RF
dBm
LO/RF isolation
30
dBc
(1) On wafer measurements.
(2) Depends on the wire bonding conditions and on the external matching network.
Absolute Maximum Ratings (1)
Tamb = +25°C
Symbol
Parameter
Values
Unit
P_LO
Maximum peak input power overdrive at LO port (2)
10
dBm
P_RF
Maximum peak input power overdrive at RF port (2)
10
dBm
P_IF
Maximum peak input power overdrive at IF port (2)
10
dBm
Top
Operating temperature range
-40 to +85
°C
Tstg
Storage temperature range
-55 to +125
°C
(1) Operation of this device above anyone of these parameters may cause permanent damage.
(2) Duration < 1s
Ref. : DSCHM11909025
2/6
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
K Band Mixer
CHM1190
Typical test fixture measurements
Tamb. = 25°C
A) Down- converter
-2
-2
Conversion gain (dB)
Conversion gain (dB)
IF=2GHz
-4
-6
-8
-10
-12
LO=23GHz
-4
-6
-8
-10
-12
21
22
23
24
25
0
1
2
LO Frequency (GHz)
3
4
IF Frequency (GHz)
Conversion gain versus LO frequency
LO Input power= 9dBm (1)
Conversion gain versus IF frequency
LO Input power= 9dBm (1)
B) Up- converter
-2
IF=2GHz
-4
Conversion gain (dB)
Conversion gain (dB)
-2
-6
-8
-10
-12
LO=23GHz
-4
-6
-8
-10
-12
21
22
23
24
25
0
1
2
LO Frequency (GHz)
Conversion gain versus LO frequency
LO Input power= 9dBm (1)
4
Conversion gain versus IF frequency
LO Input power= 9dBm (1)
2
2
IF=2GHz
LO=23GHz
0
-2
Conversion gain (dB)
Conversion gain (dB)
3
IF Frequency (GHz)
-4
-6
-8
-10
-12
0
1
2
3
4
5
6
7
8
9
10
RF Input power (dBm)
IF=2GHz
LO=23GHz
-4
-6
-8
-10
-12
-5 -4 -3 -2 -1
0
1
2
3
4
5
6
7
8
9 10
IF Input power (dBm)
Input compression point versus RF power
LO Input power= 9dBm (1)
Ref. : DSCHM11909025
0
-2
Input compression point versus IF power
LO Input power= 9dBm (1)
3/6
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
K band Mixer
0
0
-5
-5
Return loss (dB)
Return loss (dB)
CHM1190
-10
-15
-20
-25
-10
-15
LO=23GHz
-20
-25
21
22
23
24
25
LO frequency (GHz)
22
23
24
25
26
RF frequency (GHz)
LO Return loss (1)
LO input power = 9dBm
RF Return loss (1)
LO input power = 9dBm
Return loss (dB)
0
-5
-10
-15
OL=23GHz
-20
-25
0
1
2
3
4
IF frequency (GHz)
IF Return loss
LO input power = 9dBm
(1) This measurement is made with an external matching network. See application note for
further information.
Ref. : DSCHM11909025
4/6
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
K Band Mixer
CHM1190
Chip Mechanical Data
(dimensions are in µm)
70
1730 +/- 35
1020
96
300
180
1530+/-35
Chip size (including saw streets) : 1730 x 1530 ± 35µm
Thickness: 100µm ± 10µm
Pin
Description
LO
LO input signal
RF
RF input or output signal
IF
IF input or output signal
An electrically identical chip with a mirror drawing versus de LO side is available under the
part number CHM1191.
Ref. : DSCHM11909025
5/6
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
K band Mixer
CHM1190
Application note
0.54
2.1
0.35
1.1
εr ~ 2.2
h= 0.127 mm
Example of integration using low dielectric constant substrate : Er=2.2,
heigh=0.127mm (dimensions are in mm)
In order to use acceptable wire bonding length, an external matching network is
proposed for the LO input on low dielectric constant substrat.
Ordering Information
Chip form
:
CHM1190-99F/00
Information furnished is believed to be accurate and reliable. However United Monolithic Semiconductors
S.A.S. assumes no responsability for the consequences of use of such information nor for any infringement of
patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of United Monolithic Semiconductors S.A.S.. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all
information previously supplied. United Monolithic Semiconductors S.A.S. products are not authorised for use
as critical components in life support devices or systems without express written approval from United
Monolithic Semiconductors S.A.S.
Ref. : DSCHM11909025
6/6
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
Similar pages