CITIZEN CL-L251-MC6L1-C Led lamp Datasheet

SPECIFICATIONS
1/9
1. Scope of Application
These specifications are applied to the chip type LED lamp , model CL-L251-MC6L1-C
2. Part code
CL-L251- MC6L1-C
Series
L251 : White power LED for general lighting.
Special specifications
M : General Color Rendering Index Typ. 85 Type.
Watt Class
C6 : 6 watt package.
Lighting color
L1 : Energy Star Correlated Color Temperature 3000(K)
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L251-MC6L1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P618 03/10
SPECIFICATIONS
2/9
3. Outline drawing
Cathode
Resin
M6L1C
09716300001
Cathode
×12
×12
×12
Anode
Protection
device
It has a protection device built in as a
protection circuit against static electricity.
Anode
4. Performance
( 1 ) Absolute Maximum Rating
Parameter
Symbol
Rating Value
Unit
Power Dissipation
PD
8.9
W
Forward Current
IF
840
mA
Forward Pulse Current
IFP
1,200
mA
Reverse Current
IR
1
mA
Operating Temperature
TOP
-30 ~ +85
C
Storage Temperature
TST
-40 ~ +100
C
*1
120
Tj Max
C
Junction Temperature
*2
*1 Forward Current : Duty<=1/10 , Pulse Width<=10msec
*2 D.C. Current : Tj = Tc + Rj-c × PD
Pulse Current : Tj = Tc + Rj-c × Pw(Power Dissipation / one-Pulse) × duty
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L251-MC6L1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P618 03/10
SPECIFICATIONS
3/9
( 2 ) Electro-optical Characteristics
Parameter
Symbol Condition
( Tc=25 C )
Min.
Typ.
Max.
Unit
Forward Voltage
VF
IF=720mA
8.75
9.30
10.5
V
Luminous Flux
Φv
IF=720mA
361
425
-
lm
General Color
Rendering Index
Ra
IF=720mA
-
85
-
-
Thermal Resistance
Rj-c
Junction-case
-
4.0
-
C/W
Chromaticity coordinates ( Condition : IF=720mA ,Tc=25 C )
Color rank
x
y
Center 0.4338 0.4030
a
0.4562 0.4260
L1
b
0.4299 0.4165
c
0.4147 0.3814
d
0.4373 0.3893
*Color region stay with in MacAdam "3-step" ellipse from center.
0.44
0.43
0.42
y
0.41
0.40
0.39
0.38
0.37
0.41
0.42
0.43
0.44
x
0.45
0.46
Note: The tolerance of measurement at our tester is VF±3% , Φv±10% , Chromaticity(x,y)±0.005.
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L251-MC6L1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P618 03/10
SPECIFICATIONS
4/9
5. Characteristics
Forward Current vs. Forward Voltage
Forward Current vs. Relative Luminous Flux
Tc=25C
10.0
VF [V]
9.5
9.0
8.5
8.0
7.5
100%
80%
60%
40%
20%
0%
0 100 200 300 400 500 600 700 800
IF [mA]
IF [mA]
Case Temperature vs. Chromaticity Coordinate
Tc=25C
0.020
⊿x
0.015
⊿y
0.010
IF=720mA
0.020
⊿x
0.015
⊿y
0.010
0.005
0.005
Δx, Δy
Δx, Δy
120%
0 100 200 300 400 500 600 700 800
Forward Current vs. Chromaticity Coordinate
0.000
-0.005
0.000
-0.005
-0.010
-0.010
-0.015
-0.015
-0.020
-0.020
0 100 200 300 400 500 600 700 800
IF [mA]
0
Approved Checked
2010/3/1
Mark Date
Tc=25C
140%
Relative Luminous Flux [a.u.]
10.5
Issue of first edition
Description Appro.
20
Drawn
40
60
Tc [C]
80
100
Symbol
CITILED
Name
CL-L251-MC6L1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P618 03/10
SPECIFICATIONS
Case Temperature vs. Forward Voltage
Case Temperature vs. Relative Luminous Flux
IF=720mA
10.0
VF[V]
9.5
9.0
8.5
8.0
IF=720mA
120%
Relative Luminous Flux [a.u.]
10.5
5/9
100%
80%
60%
40%
20%
7.5
0%
0
20
40
60
80
100
0
20
Tc [C]
80
100
Spectrum
900
IF=720mA
1.2
Relative Emission Intensity [a.u.]
800
700
600
IF[mA]
60
Tc [C]
Case Temperature vs. Allowable Forward Current
500
400
300
200
100
0
1.0
0.8
0.6
0.4
0.2
0.0
0
25
50
75
100
125
350
450
Approved Checked
Issue of first edition
Description Appro.
550
650
750
λ [nm]
Tc [C]
2010/3/1
Mark Date
40
Drawn
Symbol
CITILED
Name
CL-L251-MC6L1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P618 03/10
SPECIFICATIONS
6/9
6. Reliability
(1) Details of the tests
Test Item
Test Condition
Ta=-25 C, IF=480 mA× 1000 hours(with Al-fin)
Continuous Operation Test
Ta=50 C,IF=480 mA× 1000 hours(with Al-fin)
Low Temperature Storage Test -40 C × 1000 hours
High Temperature Storage Test 100 C × 1000 hours
Moisture-proof Test
Thermal Shock Test
60 C, 90 %RH for 1000 hours
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
(2) Judgment Criteria of Failure for Reliability Test
Measuring Item
Symbol Measuring Condition
Forward Voltage
VF
Total Luminous Flux
Φv
(Ta=25 C)
Judgment Criteria for Failure
IF=480mA
IF=480mA
> U × 1.1
< S × 0.85
U defines the upper limit of the specified characteristics. S defines the initial value.
Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
returned to the normal ambient conditions after the completion of each test.
CL-L251-MC4L reliability test results will be used for CL-L251-MC6L1-C.
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L251-MC6L1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P618 03/10
SPECIFICATIONS
7/9
7. Packing Specifications
(1) Packing
An empty tray is placed on top of a five-tier tray which contain 48 pieces each. The set of six
trays is banded together with two rubber bands.
(Smallest packing unit: 240 pieces)
A label with product name, quantity, lot number is placed on the upper empty tray.
Tray (Dimensions: 310 × 200 × 14.6mm / Materials: Electrically conductive PS)
< Packing figure >
14.6
210
310
Product 50pcs/tray
Product 50pcs/tray
< Example of indication label >
CUSTOMER
TYPE CL-L251-MC6L1-C
xxx
P.NO
LOT No 03D001
Q'ty
240 pcs.
---(1)
---(2)
---(3)
---(4)
PASS
CITIZEN ELECTRONICS
1. TYPE
e.g. CL-L251-MC6L1-C
2. P.No. (Cutomer's P/N)
e.g. xxx
3. Lot No.
e.g. 03D001
- First letter: Last digit of the year
e.g. 0 : year 2010
- Second letter: Production month
e.g. 3 : Mar
Note: October, November and December are designated
by X, Y and Z, respectively.
- Third letter: CE's control number e.g. D001
4. Quantity
e.g. 240 pieces
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L251-MC6L1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P618 03/10
SPECIFICATIONS
8/9
Precautions
1. Avoid the application of any stress to the lens portion.
2. Avoid any contact by a sharp metal nail or other materials with the lens portion.
Resin portion (Shaded area)
M3screw (Insulation)
Recommended torque : 0.6~0.8N-m
Spring washer (≦ ƒΣ6mm)
Plane washer ( ≦ƒΣ6mm)
12.64 mm
3. This product should be secured firmly by fastening an M3 screw on both sides of the product.
Please be careful not to apply any stress to the product during the clamping operation.
As the connection status could vary depending on materials of outer heat sink,
please check thoroughly.
Thermal conductive silicon grease
(Insulation paste)
13.08
Outer heat sink
Recommended installation screw pitch
4. Thermal conductive silicone grease should be applied to the whole rear surface so that this product
can dissipate heat as a whole. However, the use of insulating paste is strongly recommended in
order to avoid short circuit. This product could be bent during the clamping operation if heat
grease in sheet form is used. For this reason, it is recommended that grease in paste form is used.
In addition, sufficient insulation should be established between heat sink area of LED package and
surface of fixture. (*surface of fixture: exterior of instrument used for dielectric strength test
in Electrical Appliance and Material Safety Law.)
5. Handling of static electricity
- These products are sensitive to static electricity charge.
Please take measures to prevent any static electricity being produced such as the wearing of a
wristband or anti-static gloves when handling this product.
- All devices, equipment and machinery must be properly grounded. It is recommended that precautions
be taken against surge voltage to the equipment that mounts the LEDs.
- ESD sensitivity of this product is 1000V (HBM, based on JEITA ED-4701/304).
- When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not.
- It is easy to find static-damaged LEDs by a light-on test.
<Light-on test criterion>
Judgmental criterion
Condition
IF=Max.1mA
No-lighting in entire block making
up parallel circuit is unacceptable
L251 consists of three blocks.
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L251-MC6L1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P618 03/10
SPECIFICATIONS
9/9
Precautions (continued)
6. Please be aware that this product should not come into contact with any other parts
in assembled status.
7.Drive circuit
- A constant current circuit is recommended as a drive circuit.
And when two or more LED packages are connected, the series connection
between each package is recommended.
- Please design a circuit that prevents any reverse voltage (excess current) from being
applied to this product instantaneously when the circuit is ON or OFF.
8. Heat generation
- As this product is designed with consideration of the heat release property of module,
a heat release design is required to use this product efficiently.
Please ensure that heat generation is not in excess of the absolute maximum rating.
(Refer to 4-1 Performance)
- Factors responsible for an increase in temperature include heat generation attributed to
ambient temperature conditions or power dissipation. Thus, drive conditions should be
taken into consideration, depending on ambient temperature (Ta).
9. Recommended soldering
- Soldering operation should be performed within 3.5 seconds per land using a soldering iron
of 40W or lower. The temperature of a soldering iron should be adjusted 350C or lower.
- No external force is applied to sealing resin during soldering operation.
- Please do not handle a product until it returns to a normal temperature.
Note: This product is not adaptable to reflow process.
10. Other
- This product complies with RoHS directives.
- This product is intended for the application in general electronic devices (such as
office automation equipment, communication devices, audio-video equipment,
home electrical appliances, measurement hardware and others).
In cases where this product is used for the applications that requires high reliability or
could directly affect human life or health due to failure or malfunction (aerospace hardware,
medical equipment, atomic control equipment and others), please consult with our sales
representatives beforehand.
- Our warranty does not cover situations where this product undergoes secondary
fabrication such as changes in shape.
- An agreement of formal product specifications is required prior to mass production.
- The specifications and appearance of this product are subject to change without advanced notice.
Approved Checked
2010/3/1
Mark Date
Issue of first edition
Description Appro.
Drawn
Symbol
CITILED
Name
CL-L251-MC6L1-C
Drawing No
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P618 03/10
Similar pages