CADEKA CLC2058ISO8X

Data Sheet
Comlinear CLC2058
®
Dual 4V to 36V Amplifier
General Description
APPLICATIONS
n Active Filters
n Audio Amplifiers
n Audio AC-3 Decoder Systems
n General purpose dual ampliifer
Typical Application - 2nd Order Low-Pass Audio Filter
The COMLINEAR CLC2058 is a dual voltage feedback amplifier that is internally frequency compensated to provide unity gain stability. The CLC2058
offers 3.5MHz of bandwidth at a gain of 2. The CLC2058 also features high
gain, low input voltage noise, high input resistance, and superb channel separation making it well suited for audio filter applications in set-top-boxes, DVD
players, and televisions.
The COMLINEAR CLC2058 is designed to operate over a wide power supply
voltage range, ±2V to ±18V (4V to 36V). It utilizes an industry standard
dual amplifier pin-out and is available in a Pb-free, RoHS compliant SOIC-8
package.
R1
20kΩ
C1
150pF
Rev 1C
V EE =-12V
C2
22µF/25V
VIN
R2
10kΩ
C3
0.1µF
R3
2(6)
3.3kΩ
4
CLC2058
3(5)
C5
1000pF
–
+
C4
22µF/25V
1(7)
VOUT
8
R5
10kΩ
R4
6.8kΩ
V CC =+12V
C6
0.1µF
Ordering Information
Part Number
Package
Pb-Free
RoHS Compliant
Operating Temperature Range
Packaging Method
CLC2058ISO8X
SOIC-8
Yes
Yes
-40°C to +85°C
Reel
Moisture sensitivity level for all parts is MSL-1.
©2008-2010 CADEKA Microcircuits LLC Comlinear CLC2058 Dual 4V to 36V Amplifier
FEATURES
n Unity gain stable
n 100dB voltage gain
n 5.5MHz gain bandwidth product
n 0.5MΩ input resistance
n 100dB power supply rejection ratio
n 95dB common mode rejection ratio
n 4V to 36V single supply voltage range
n ±2V to ±18V dual supply voltage range
n Gain and phase match between amps
n CLC2058: improved replacement for
NJM4558 and MC1458
n CLC2058: Pb-free SOIC-8
www.cadeka.com
Data Sheet
CLC2058 Pin Configuration
8
+VS
-IN1
2
7
OUT2
+IN1
3
6
-IN2
-V S
4
5
+IN2
Pin No.
Pin Name
Description
1
OUT1
Output, channel 1
2
-IN1
Negative input, channel 1
3
+IN1
Positive input, channel 1
4
-VS
5
+IN2
Positive input, channel 2
6
-IN2
Negative input, channel 2
7
OUT2
Output, channel 2
8
+VS
Comlinear CLC2058 Dual 4V to 36V Amplifier
OUT1
1
CLC2058 Pin Description
Negative supply
Positive supply
Rev 1C
©2008-2010 CADEKA Microcircuits LLC www.cadeka.com
2
Data Sheet
Absolute Maximum Ratings
The safety of the device is not guaranteed when it is operated above the “Absolute Maximum Ratings”. The device
should not be operated at these “absolute” limits. Adhere to the “Recommended Operating Conditions” for proper device function. The information contained in the Electrical Characteristics tables and Typical Performance plots reflect the
operating conditions noted on the tables and plots.
Min
Max
Unit
0
40 (±20)
60 (±30)
30 (±15)
500
V
V
V
mW
Supply Voltage
Differential Input Voltage
Input Voltage
Power Dissipation (TA = 25°C) - SOIC-8
Comlinear CLC2058 Dual 4V to 36V Amplifier
Parameter
Reliability Information
Parameter
Junction Temperature
Storage Temperature Range
Lead Temperature (Soldering, 10s)
Package Thermal Resistance
SOIC-8
Min
Typ
-65
Max
Unit
150
150
260
°C
°C
°C
100
°C/W
Notes:
Package thermal resistance (qJA), JDEC standard, multi-layer test boards, still air.
Recommended Operating Conditions
Parameter
Operating Temperature Range
Supply Voltage Range
Min
-40
4 (±2)
Typ
Max
Unit
+85
36 (±18)
°C
V
Rev 1C
©2008-2010 CADEKA Microcircuits LLC www.cadeka.com
3
Data Sheet
Electrical Characteristics
TA = 25°C, +Vs = +15V, -Vs = -15V, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted.
Symbol
Parameter
Conditions
Min
Typ
Max
Units
Frequency Domain Response
G = +1, VOUT = 0.2Vpp, VS = 5V, Rf = 0
Unity Gain Bandwidth
BWSS
-3dB Bandwidth
BWLS
Large Signal Bandwidth
GBWP
Gain-Bandwidth Product
4.62
MHz
G = +1, VOUT = 0.2Vpp, VS = 30V, Rf = 0
4.86
MHz
G = +2, VOUT = 0.2Vpp, VS = 5V
3.49
MHz
G = +1, VOUT = 0.2Vpp, VS = 30V
3.55
MHz
G = +2, VOUT = 1Vpp, VS = 5V
1.25
MHz
G = +2, VOUT = 2Vpp, VS = 30V
0.74
MHz
5.5
MHz
VOUT = 0.2V step; (10% to 90%), VS = 5V
100
ns
VOUT = 0.2V step; (10% to 90%), VS = 30V
98
ns
Time Domain Response
tR, tF
Rise and Fall Time
OS
Overshoot
SR
Slew Rate
VOUT = 0.2V step
12
%
2V step, VS = 5V
2.6
V/µs
4V step, VS = 30V
2.8
V/µs
0.002
%
> 1kHz, VS = 5V
10
nV/√Hz
> 1kHz, VS = 30V
10
nV/√Hz
Channel-to-channel, 500kHz
65
dB
Distortion/Noise Response
THD+N
Total Harmonic Distortion plus Noise
en
Input Voltage Noise
XTALK
Crosstalk
VOUT = 1VRMS, f = 1kHz, G = 2, RL = 10kΩ,
VS = 30V
DC Performance
Input Offset Voltage (1)
VS = 5V to 30V
1
5
mV
Ib
Input Bias Current (1)
VCM = 0V
70
400
nA
IOS
Input Offset Current
VCM = 0V
10
100
nA
(1)
PSRR
Power Supply Rejection Ratio
DC, RS ≤ 10kΩ
80
100
AOL
Open-Loop Gain (1)
RL = ≥2kΩ, VOUT = 1V to 11V
85
100
IS
Supply Current
Total, RL = ∞
(1)
(1)
2.5
Rev 1C
VIO
dB
dB
4.5
mA
Input Characteristics
CMIR
Common Mode Input Range (1,3)
CMRR
Common Mode Rejection Ratio
RIN
Input Resistance
(1)
+VS = 30V
DC, RS ≤ 10kΩ
±12
70
V
95
dB
0.5
MΩ
45
Ω
V
Output Characteristics
ROUT
Output Resistance
VOUT
Output Voltage Swing (1)
ISOURCE
Output Current, Sourcing
VIN+ = 1V, VIN- = 0V, VOUT = 2V
ISINK
Output Current, Sinking
VIN+ = 0V, VIN- = 1V, VOUT = 2V
RL = 2kΩ
±10
±13
RL = 10kΩ
±12
±14
V
35
mA
60
mA
Notes:
1. 100% tested at 25°C at VS = ±15V.
©2008-2010 CADEKA Microcircuits LLC www.cadeka.com
Comlinear CLC2058 Dual 4V to 36V Amplifier
UGBWSS
4
Data Sheet
Typical Performance Characteristics
TA = 25°C, +Vs = +15V, -Vs = -15V, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted.
Non-Inverting Frequency Response
Inverting Frequency Response
G = -1
G=1
Rf = 0
0
0
Normalized Gain (dB)
Normalized Gain (dB)
5
G=2
-5
G=5
G = 10
-10
G = -2
-5
G = -5
G = -10
-10
-15
-20
VOUT = 0.2Vpp
-15
VOUT = 0.2Vpp
-25
0.1
1
10
100
0.1
1
Frequency (MHz)
-3dB Bandwidth vs. VOUT
5
5
0
4
-5
-3dB Bandwidth (MHz)
Vout = 2Vpp
Vout = 4Vpp
-10
-15
3
2
Rev 1C
Normalized Gain (dB)
10
Frequency (MHz)
Large Signal Frequency Response
1
-20
-25
0
0.1
1
10
0.0
0.5
1.0
1.5
2.0
Frequency (MHz)
2.5
3.0
3.5
4.0
VOUT (VPP)
Small Signal Pulse Response
Large Signal Pulse Response
0.15
3
0.1
2
Output Voltage (V)
Output Voltage (V)
Comlinear CLC2058 Dual 4V to 36V Amplifier
5
0.05
0
-0.05
-0.1
1
0
-1
-2
-0.15
-3
0
2
4
6
Time (us)
©2008-2010 CADEKA Microcircuits LLC 8
10
0
2
4
6
8
10
www.cadeka.com
5
Time (us)
Data Sheet
Typical Performance Characteristics
TA = 25°C, +Vs = +5V, -Vs = GND, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted.
Non-Inverting Frequency Response
Inverting Frequency Response
G = -1
G=1
Rf = 0
0
0
Normalized Gain (dB)
Normalized Gain (dB)
5
G=2
-5
G=5
G = 10
-10
G = -2
-5
G = -5
G = -10
-10
-15
-20
VOUT = 0.2Vpp
-15
VOUT = 0.2Vpp
-25
0.1
1
10
100
0.1
1
Frequency (MHz)
-3dB Bandwidth vs. VOUT
5
5
0
4
-5
Vout = 2Vpp
-10
-15
3
2
Rev 1C
-3dB Bandwidth (MHz)
Vout = 1Vpp
Normalized Gain (dB)
10
Frequency (MHz)
Large Signal Frequency Response
1
-20
-25
0
0.1
1
10
0.0
0.5
1.0
Frequency (MHz)
1.5
2.0
VOUT (VPP)
Small Signal Pulse Response
Large Signal Pulse Response
2.65
4
2.60
3.5
Output Voltage (V)
Output Voltage (V)
Comlinear CLC2058 Dual 4V to 36V Amplifier
5
2.55
2.50
2.45
2.40
3
2.5
2
1.5
2.35
1
0
2
4
6
Time (us)
©2008-2010 CADEKA Microcircuits LLC 8
10
0
2
4
6
8
10
www.cadeka.com
6
Time (us)
Data Sheet
Typical Performance Characteristics
TA = 25°C, +Vs = +15V, -Vs = -15V, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted.
Supply Current vs. Temperature
3.2
100
3
Supply Current (mA)
120
80
60
40
20
Comlinear CLC2058 Dual 4V to 36V Amplifier
Open Loop Gain (db)
Open Loop Voltage Gain vs. Frequency
2.8
2.6
2.4
2.2
RL=2K
0
2
0.001
0.01
0.1
1
10
100
1000
-40
-20
0
Frequency (KHz)
20
40
60
80
100
120
Temperature (°C)
Maximum Output Voltage Swing vs. Frequency
Maximum Output Voltage Swing vs. RL
20
16
Postive Voltage Swing
Output Voltage Swing (V)
15
10
5
RL=2K,
THD+N<5%
8
4
0
-4
Rev 1C
Maximum Swing Voltage (V)
12
-8
Negative Voltage Swing
-12
0
-16
0.1
1
10
100
0.1
1
Frequency (KHz)
Input Offset Voltage vs. Temperature
Input Bias Current vs. Temperature
5
120
4
100
Input Bias Current (nA)
Input Offset Voltage (mV)
10
Resistance Load (KΩ)
3
2
1
0
80
60
40
20
-1
-2
0
-40
-20
0
20
40
60
Temperature (°C)
©2008-2010 CADEKA Microcircuits LLC 80
100
120
-40
-20
0
20
40
60
80
100
120
Temperature (°C)
www.cadeka.com
7
Data Sheet
Typical Performance Characteristics
TA = 25°C, +Vs = +15V, -Vs = -15V, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted.
Supply Voltage vs. Supply Current
Crosstalk vs. Frequency
-2.2
-50
-55
2.4
ICC
ICC (mA)
IEE (mA)
2.3
IEE
2.2
-2.4
Crosstalk (db)
-60
-2.3
-65
-70
-75
2.1
-80
2
-2.5
2
4
6
8
10
12
Supply Voltage (+/-V)
14
16
18
-85
0.1
1.0
Frequency (MHz)
Functional Block Diagram
VCC
- Input
Rev 1C
+ Input
Output
VEE
©2008-2010 CADEKA Microcircuits LLC Comlinear CLC2058 Dual 4V to 36V Amplifier
2.5
www.cadeka.com
8
Data Sheet
Application Information
Power Dissipation
Figures 1, 2, and 3 illustrate typical circuit configurations for
non-inverting, inverting, and unity gain topologies for dual
supply applications. They show the recommended bypass
capacitor values and overall closed loop gain equations.
Power dissipation should not be a factor when operating
under the stated 2k ohm load condition. However, applications with low impedance, DC coupled loads should
be analyzed to ensure that maximum allowed junction
temperature is not exceeded. Guidelines listed below can
be used to verify that the particular application will not
cause the device to operate beyond it’s intended operating range.
+Vs
Input
6.8μF
0.1μF
+
Output
-
RL
0.1μF
Rg
Rf
6.8μF
TJunction = TAmbient + (ӨJA × PD)
G = 1 + (Rf/Rg)
-Vs
Figure 1. Typical Non-Inverting Gain Circuit
+Vs
R1
Rg
PD = Psupply - Pload
0.1μF
Supply power is calculated by the standard power equation.
Output
0.1μF
6.8μF
-Vs
RL
Power delivered to a purely resistive load is:
G = - (Rf/Rg)
For optimum input offset
voltage set R1 = Rf || Rg
6.8μF
The effective load resistor (Rloadeff) will need to include
the effect of the feedback network. For instance,
RL || (Rf + Rg)
Output
-
RL
0.1μF
6.8μF
-Vs
Pload = ((VLOAD)RMS2)/Rloadeff
Rloadeff in figure 3 would be calculated as:
0.1μF
+
Psupply = Vsupply × IRMS supply
Vsupply = VS+ - VS-
Rf
Figure 2. Typical Inverting Gain Circuit
Input
In order to determine PD, the power dissipated in the load
needs to be subtracted from the total power delivered by
the supplies.
6.8μF
-
+Vs
Where TAmbient is the temperature of the working environment.
Rev 1C
Input
+
Maximum power levels are set by the absolute maximum
junction rating of 150°C. To calculate the junction temperature, the package thermal resistance value ThetaJA
(ӨJA) is used along with the total die power dissipation.
G=1
Figure 3. Unity Gain Circuit
©2008-2010 CADEKA Microcircuits LLC Comlinear CLC2058 Dual 4V to 36V Amplifier
Basic Operation
These measurements are basic and are relatively easy to
perform with standard lab equipment. For design purposes however, prior knowledge of actual signal levels and
load impedance is needed to determine the dissipated
power. Here, PD can be found from
PD = PQuiescent + PDynamic - PLoad
Quiescent power can be derived from the specified IS values along with known supply voltage, VSupply. Load power
www.cadeka.com
9
Data Sheet
can be calculated as above with the desired signal amplitudes using:
(VLOAD)RMS = VPEAK / √2
( ILOAD)RMS = ( VLOAD)RMS / Rloadeff
PDYNAMIC = (VS+ - VLOAD)RMS × ( ILOAD)RMS
Assuming the load is referenced in the middle of the power rails or Vsupply/2.
An overdrive condition is defined as the point when either one of the inputs or the output exceed their specified
voltage range. Overdrive recovery is the time needed for
the amplifier to return to its normal or linear operating
point. The recovery time varies, based on whether the
input or output is overdriven and by how much the range
is exceeded. The CLC2058 will typically recover in less
than 30ns from an overdrive condition. Figure 6 shows the
CLC2058 in an overdriven condition.
Figure 4 shows the maximum safe power dissipation in
the package vs. the ambient temperature for the packages available.
10
Input
5
Input Voltage (V)
1.5
10
0
0
Output
-5
1
Output Voltage (V)
2
Maximum Power Dissipation (W)
20
VIN = 7.5Vpp
G=5
-10
SOIC-8
-10
0.5
-20
0
10
20
30
40
50
Time (us)
Rev 1C
0
-40
-20
0
20
40
60
80
Ambient Temperature (°C)
Figure 4. Maximum Power Derating
Driving Capacitive Loads
Increased phase delay at the output due to capacitive
loading can cause ringing, peaking in the frequency response, and possible unstable behavior. Use a series resistance, RS, between the amplifier and the load to help
improve stability and settling performance. Refer to Figure 5.
Figure 6. Overdrive Recovery
Layout Considerations
General layout and supply bypassing play major roles
in high frequency performance. CADEKA has evaluation
boards to use as a guide for high frequency layout and as
an aid in device testing and characterization. Follow the
steps below as a basis for high frequency layout:
• Include 6.8µF and 0.1µF ceramic capacitors for power
supply decoupling
• Place the 6.8µF capacitor within 0.75 inches of the power pin
• Place the 0.1µF capacitor within 0.1 inches of the power pin
Input
+
Rs
Rf
Output
CL
RL
Rg
• Remove the ground plane under and around the part,
especially near the input and output pins to reduce parasitic capacitance
• Minimize all trace lengths to reduce series inductances
Figure 5. Addition of RS for Driving
Capacitive Loads
©2008-2010 CADEKA Microcircuits LLC Refer to the evaluation board layouts below for more information.
www.cadeka.com
Comlinear CLC2058 Dual 4V to 36V Amplifier
The dynamic power is focused primarily within the output
stage driving the load. This value can be calculated as:
Overdrive Recovery
10
Data Sheet
Evaluation Board Information
The following evaluation boards are available to aid in the
testing and layout of these devices:
Products
Comlinear CLC2058 Dual 4V to 36V Amplifier
Evaluation Board #
CEB006
CLC2058
Evaluation Board Schematics
Evaluation board schematics and layouts are shown in Figures 7-9. These evaluation boards are built for dual- supply operation. Follow these steps to use the board in a
single-supply application:
1. Short -Vs to ground.
Figure 8. CEB006 Top View
2. Use C3 and C4, if the -VS pin of the amplifier is not
directly connected to the ground plane.
Rev 1C
Figure 9. CEB006 Bottom View
Figure 7. CEB006 Schematic
©2008-2010 CADEKA Microcircuits LLC www.cadeka.com
11
Data Sheet
Typical Applications
5pF
10µF
+
1kΩ
Audio_Input L
1.8kΩ
150µF
39kΩ
620Ω
Audio_Output L
+
680pF
2
3
10kΩ
–
1/2
CLC2058
470pF
Comlinear CLC2058 Dual 4V to 36V Amplifier
DAC Load
Resistor
+VS
8
+
1
4
100Ω
AUDIO AMPLIFIER
Amp RV
5pF
1kΩ
Audio_Input R
10µF
1.8kΩ
150µF
39kΩ
620Ω
+VS
DAC Load
Resistor
10kΩ
680pF
6
10kΩ
100µF
+
100Ω
Amp RV
0.1µF
10kΩ
0.1µF
+
5
–
1/2
CLC2058
Audio_Output R
470pF
7
+
100µF
Figure 10: Typical Circuit for Filtering and Driving Audio in STB or DVD Player Applications
1
-50
-60
-1
-65
-2
Crosstalk (dB)
Normalized Gain (dB)
Rev 1C
-55
0
-3
-4
-70
-75
-80
-85
-5
-90
-6
VOUT = 5Vpp
-95
-7
VOUT = 5Vpp
-100
0.1
1
10
100
1000
Frequency (kHz)
Figure 11: AC Reponse of Figure 10 (VS=10V, RL=630Ω)
©2008-2010 CADEKA Microcircuits LLC 0.1
1
10
100
1000
Frequency Response (kHz)
Figure 12: Cross-Talk Performance of Figure 10 (VS=10V,
RL=630Ω)
www.cadeka.com
12
Data Sheet
Mechanical Dimensions
SOIC-8 Package
Comlinear CLC2058 Dual 4V to 36V Amplifier
Rev 1C
For additional information regarding our products, please visit CADEKA at: cadeka.com
CADEKA Headquarters Loveland, Colorado
T: 970.663.5452
T: 877.663.5452 (toll free)
CADEKA, the CADEKA logo design, COMLINEAR, and the COMLINEAR logo design, are trademarks or registered trademarks of CADEKA
Microcircuits LLC. All other brand and product names may be trademarks of their respective companies.
CADEKA reserves the right to make changes to any products and services herein at any time without notice. CADEKA does not assume any
responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in
writing by CADEKA; nor does the purchase, lease, or use of a product or service from CADEKA convey a license under any patent rights,
copyrights, trademark rights, or any other of the intellectual property rights of CADEKA or of third parties.
Copyright ©2008-2010 by CADEKA Microcircuits LLC. All rights reserved.