CLV1150L-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Radios • CATV Modems • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1100 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -108 Harmonic Suppression (2nd) -15 Tuning Voltage 0.3 Max Units 1200 MHz dBc/Hz -13 dBc 4.7 Vdc MHz/V 44 Tuning Sensitivity (avg.) 4 dBm 100 pF Pushing 1 MHz/V Pulling (12 dB Return Loss, Any Phase) 2 MHz 85 °C Max Units Power Output 0 Load Impedance 2 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 18 Vdc 22 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV1150L-LF Rev A1 Tuning Curve, typ. 1280 FREQUENCY (MHz) 1260 1240 1220 1200 1140 85 °C 25 °C 1120 -40 °C 1180 1160 1100 1080 1060 1040 1020 0 0.6 1.2 1.8 2.4 3 3.6 4.2 4.7 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 6 5 4 3 2 0.030 MIN. CUTBACK FROM LIVE PADS 1 0 -1 -2 1039 1071 1098 1124 1149 1174 1200 1228 1252 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B