CLV1185A PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Radios • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1140 Typ Max Units 1230 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -107 dBc/Hz Harmonic Suppression (2nd) -14 dBc Tuning Voltage 0.5 4.5 MHz/V 36 Tuning Sensitivity (avg.) 7 dBm Input Capacitance 50 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) 2 MHz 85 °C Max Units Power Output -1 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 3 Vdc MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 25 Vdc 30 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV1185A Rev A1 Tuning Curve, typ. 1300 FREQUENCY (MHz) 1280 1260 1240 1220 85 °C 25 °C 1200 1180 1160 -40 °C 1140 1120 1100 1080 1060 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 10 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 1089 1116 1139 1162 1184 1207 1230 1252 1275 1297 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B