CLARE CM10-2286 Molded mini-dyad Datasheet

Molded Mini-DYAD™
CM10
Features
Small size
SMT-compatible
Easily formed leads
Sputtered ruthenium contacts
Hermetically sealed contacts
Fast switching speed — up to 500Hz
Wide range of available magnetic sensitivities
Superior mechanical strength
Enhanced for better auto placement
Description
Clare's Molded Mini DYAD dry reed switches are ideally
suited for small switching signal applications. This switch
has sputtered tuthenium contacts and an extraordinary
seal strength, achieved by a patented laser sealing of the
glass. In a low level or dry switching environments, both
switches typically provide >1 billion operations. The
switches have hermetically sealed contacts and offer a
wide range of available magnetic sensitivities. In addition,
the molding process provides a solid plastic outer shell.
This plastic shell provides superior mechanical strength,
eliminates concerns over handling glass switches, and
provides an ideal solution for high speed, automated
assembly environments.
•
•
•
•
•
•
•
•
•
Applications
• Security
− Proximity sensing
− Smoke alarms
• Automotive
− Level sensor
− Lamp current sensor
• Relays
Ordering Information
A complete part number is represented by the digits to the
right. For example, CM10S2030 is a MOLDED MINIDYAD™ with a minimum operate value of 10NI and a
maximum of 30NI. Refer to the switch operating specification charts for available ranges. Special ranges are available
upon request.
CM10 S XX XX
"S" for straight switch
blank for SMT
Maximum
operate value
Minimum
operate value
Surface Mount Molded Mini-DYAD
Refer to operating characteristics table for complete part number.
Standard Test Coil
The magnetic force (expressed in NI, AT or Ampere Turns) required to cause the reed switch contacts to
close is called the pull-in or operate value.
Part #
CM10
Part #
Coil definition
Coil resistance
Number of turns
Wire size (nom. diameter)
Bobbin diameter (inside coil)
Winding length
Molded Mini-DYADTM
CM10S1015
CM10S1020
CM10S1030
CM10S1520
CM10S1525
CM10S2025
Coil - 1
NARM1 CTC01
1200Ω
5,000
0.0399mm (AWG 46)
3.96mm
10.4mm
(1)
Consult factory for test procedure.
The reed switch shall be placed in the test coil with the gap centered in the core of the coil winding.
Test leads and their clips must be non-magnetic.
The longitudinal axis of the test coil and the test switch shall be vertical.
10 to 15
10 to 20
10 to 30
15 to 20
15 to 25
20 to 25
Molded Mini-DYADTM Surface Mount
Part #
CM10-2308
CM10-2288
CM10-2339
CM10-2285
CM10-2289
CM10-2286
1
2
3
DS-CM10-R1
Operate Range (NI)1
Operate Range (NI)1,2,3
10 to 15
10 to 20
10 to 30
15 to 20
15 to 25
20 to 25
Tolerance = ± 1.5NI
Full Blade Sensitivity
Surface Mount Switches are packaged 3,000 parts per reel
www.clare.com
1
Molded Mini-DYAD™
CM10
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for extended period may degrade the device and effect
its reliability.
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Switching Voltage
CM10 - Molded Mini-DYAD™
Switching Current
CM10 - Molded Mini-DYAD™
Carry Current
CM10 - Molded Mini-DYAD™
Switching Frequency
CM10 - Molded Mini-DYAD™
Contact Resistance
CM10 - Molded Mini-DYAD™
Min
Typ Max Units
-
-
200
Volts
-
-
0.5 Amps
-
-
2
Amps
-
-
500
Hz
-
-0
100
mΩ
(See detailed specifications for more information.)
Specifications
All parameters are at 25°C unless otherwise stated.
PARAMETER
Contact Ratings
Operate ampere turns range
Release ampere turns range
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy
Static Contact Resistance
Contact Material
Switch Specifications
Insulation Resistance(2)
Capacitance
Dielectric Strength(5)
Operate Time,
including bounce
Release Time
Environmental Ratings
Storage Temperature
Operating Temperature
Soldering Temperature
CONDITIONS
SYMBOL
MIN
TYP
MAX
UNITS
Full Blade Tolerance = ± 1.5NI
Full Blade Tolerance = ± 1.5NI
Max DC/PeakAC Resistive
Max DC/PeakAC Resistive
Max DC/PeakAC Resistive
Max DC/PeakAC Resistive
1V, 10mA Signal Level
10V, 10mA Low Level
50V, 100mA Telecom Load
100V, 100mA Rated Loads
50mV, 10mA(1)
AT
AT
VL
IL
IC
CR
-
10
5
-
1000
500
2
2
70
Ru
30
30
200
500
2.0
10
100
-
NI
NI
VDC
mAmps
Amps
VA
x106 Ops
-x106 Ops
x106 Ops
x106 Ops
Ω
-
100V, 25°C, 40% RH
Across Open Contacts
Between Contacts
At nominal coil voltage,
10Hz Square Wave
Zener-Diode Suppression(3)
IR
TOP
109
250
-
1011
0.3
300
-
0.5
Ω
pF
VDC/Peak AC
ms
TREL
-
-
0.1
ms
TA
TO
-
-40
-40
-
-
+125
+125
+265
˚C
˚C
˚C
(1)
Contact resistance measured with 4 terminal method, 1.1" between test leads
>1012 Ω is available upon request
A 24V zener in series with a diode across the coil
(4)
Use caution not to exceed vibration resistance limits while ultrasonically cleaning. Contact Clare, Inc.
Engineering for more details/ recommendations
(5)
15 ampere turn minimum
(2)
(3)
2
www.clare.com
Rev. 1
Molded Mini-DYAD™
CM10
Mechanical Dimensions
Dimensions
mm
(inches)
Rev. 1
www.clare.com
3
Worldwide Sales Offices
CLARE LOCATIONS
EUROPE
ASIA PACIFIC
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
Clare Switch Division
4315 Earth City Expresssway
St. Louis, MO 63045
Tel: 1-314-770-1832
Fax: 1-314-770-1812
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without
notice at any time. The products described in this document are not
intended for use in medical implantation or other direct life support
applications where malfunction may result in direct physical harm,
injury or death to a person.
Specification: PB-CM10-R1
©Copyright 2001
Molded Ultra-Mini DYAD™, Molded Mini DYAD™, and
Molded DYAD® are trademarks of Clare, Inc.
All rights reserved. Printed in USA.
4/23/01
Similar pages