CM25MD1-24H Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CI Module Three Phase Converter + Three Phase Inverter 25 Amperes/1200 Volts A L G L J H H K K K GB NOT CONNECTED K L K K K (2 PLACES) GV EV GW EW GU EU P P1 N G E G E GUGV GW E G E GB G G G E C Q R "U" (2 PLACES) R B F E Q R S N "T" THICK V S M T B M P U P V M Description: Powerex CI Modules are designed for use in switching applications. Each module consists of a three phase diode converter section and a three phase IGBT inverter section. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. W M W X 45° MAIN TERMINAL CONTROL TERMINAL Z LABEL Y P P1 GU GV GW EU EV EW GU GV GW R S T N B E U V W Features: □ Low Drive Power □ Low VCE(sat) □ Discrete Super-Fast Recovery (70ns) Free-Wheel Diodes □ High Frequency Operation (20-25 kHz) □ Isolated Baseplate for Easy Heat Sinking Outline Drawing and Circuit Diagram Dimensions Inches A 4.53 Millimeters 115.0 Dimensions Inches Millimeters N 0.51 13.0 B 2.36 60.0 P 0.59 15.0 C 1.18 30.0 Q 1.14 29.0 D 0.18 4.5 R 2.28 58.0 E 4.13 105.0 S 0.16 4.0 Applications: □ AC Motor Control □ Motion/Servo Control □ General Purpose Inverters □ Robotics Ordering Information: Example: Select the complete nine digit module part number you desire from the table below - i.e. CM25MD1-24H is a 1200V (VCES), 25 Ampere CI Power Module. F 0.20 5.0 T 0.02 0.6 G 0.31 8.0 U 0.22 5.5 H 0.59 15.0 V 0.08 2.0 J 0.68 17.2 W 0.02 0.6 K 0.10 2.54 X 0.35 9.0 Type Current Rating Amperes VCES Volts (x 50) L 0.40 10.16 Y 0.25 6.3 CM 25 24 M 0.49 12.5 Z 0.47 12.0 1 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM25MD1-24H CI Module Three Phase Converter + Three Phase Inverter 25 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Characteristics Symbol CM25MD1-24H Units Tj -40 to 150 °C Tstg -40 to 125 °C — 13 in-lb Power Device Junction Temperature Storage Temperature Mounting Torque, M4 Mounting Screws Module Weight (Typical) — 100 Grams Isolation Voltage, AC 1 minute, 60Hz VRMS 2500 Volts Converter Sector Repetitive Peak Reverse Voltage VRRM 1600 Volts Recommended AC Input Voltage Ea 440 Volts DC Output Current IO 25 Amperes IFSM 250 Amperes I2t 260 A2s IGBT Inverter Sector Collector-Emitter Voltage (G-E Short) VCES 1200 Volts Gate-Emitter Voltage (C-E Short) VGES ±20 Volts IC 25 Amperes ICM 50 Amperes IE 25 Amperes Emitter Current** (Pulse)* IEM 50 Amperes Maximum Collector Dissipation PC 104 Watts Surge (Non-repetitive) Forward Current I2t for Fusing Collector Current Collector Current (Pulse)* Emitter Current** Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Converter Sector Repetitive Reverse Current IRRM VR = VRRM, Tj = 150°C — — 8 mA Forward Voltage Drop VFM IF = 25A — — 1.5 Volts Rth(j-f) Per Diode — — 1.7 °C/W ICES VCE = VCES, VGE = 0V — — 1 mA VGE(th) VCE = 10V, IC = 2.5mA 4.5 6.0 7.5 Volts IGES VGE = VGES, VCE = 0V — — 0.5 µA VCE(sat) VGE = 15V, IC = 25A, Tj = 25°C — 2.7 3.4 Volts VGE = 15V, IC = 25A, Tj = 150°C — 2.45 — Volts — — 5.0 nF — — 3.8 nF — — 1.0 nF VCC = 600V, IC = 25A, VGE = 15V — 125 — nC td(on) VGE1 = VGE2 = 15V, — — 100 nS tr VCC = 600V, IC = 25A, — — 200 nS td(off) Rg = 13Ω, — — 150 nS tf Resistive Load — — 350 nS Volts Thermal Resistance (Junction-to-Fin) IGBT Inverter Sector Collector Cutoff Current Gate-Emitter Threshold Voltage Gate-Emitter Cutoff Current Collector-Emitter Saturation Voltage Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Total Gate Charge QG Resistive Turn-on Time Load Rise Time Switching Turn-off Time Times Fall Time Units Emitter-Collector Voltage VEC IE = 25A, VGE = 0V — — 3.5 Reverse Recovery Time trr IE = 25A, VGE = 0V, — — 250 nS Reverse Recovery Charge Qrr diE/dt = -50A/µs — 0.22 — µC Rth(j-f) Per IGBT — — 1.2 °C/W Per FWDi — — 1.9 °C/W Thermal Resistance (Junction-to-Fin) 2 VGE = 0V, VCE = 10V Max. * Pulse width and repetition rate should be such that device junction temperature does not exceed maximum rating. ** Characteristics of the anti-parallel emitter-collector free-wheel diode. Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM25MD1-24H CI Module Three Phase Converter + Three Phase Inverter 25 Amperes/1200 Volts 50 15 VGE = 20V 40 11 30 10 20 9 10 7 40 30 20 10 8 0 0 0 2 4 6 8 10 4 3 2 1 0 0 4 8 12 16 0 20 10 20 30 40 GATE-EMITTER VOLTAGE, VGE, (VOLTS) COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) EMITTER CURRENT, IE, (AMPERES) IC = 50A IC = 25A 4 2 IC = 10A 12 16 100 1.0 20 2.0 2.5 3.0 HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 103 REVERSE RECOVERY TIME, t rr, (ns) td(off) 102 td(on) VCC = 600V VGE = ±15V RG = 13Ω Tj = 125°C COLLECTOR CURRENT, IC, (AMPERES) 102 Irr 101 100 t rr 101 EMITTER CURRENT, IE, (AMPERES) 101 102 GATE CHARGE, VGE 101 102 100 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) di/dt = -50A/µsec Tj = 25°C tf 101 Cres 10-1 10-1 3.5 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) 103 101 100 1.5 GATE-EMITTER VOLTAGE, VGE, (VOLTS) tr Coes 100 100 10-1 102 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 8 Cies VGE = 0V f = 1MHz 0 4 101 REVERSE RECOVERY CURRENT, Irr, (AMPERES) 6 CAPACITANCE, Cies, Coes, Cres, (nF) Tj = 25°C 8 0 50 101 102 Tj = 25°C COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) VGE = 15V Tj = 25°C Tj = 125°C COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 10 SWITCHING TIME, (ns) 5 VCE = 10V Tj = 25°C Tj = 125°C 12 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) Tj = 25oC COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) 50 COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) TRANSFER CHARACTERISTICS (TYPICAL) OUTPUT CHARACTERISTICS (TYPICAL) 16 VCC = 400V VCC = 600V 12 8 4 0 0 50 100 150 200 250 GATE CHARGE, QG, (nC) 3 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 10-3 101 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) 10-2 10-1 100 100 10-1 10-1 10-2 10-2 10-3 Zth = Rth • (NORMALIZED VALUE) 10-5 TIME, (s) 4 101 Single Pulse TC = 25°C Per Unit Base = R th(j-f) = 3.5°C/W 10-4 10-3 10-3 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-f) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-f) CM25MD1-24H CI Module Three Phase Converter + Three Phase Inverter 25 Amperes/1200 Volts 10-3 101 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 10-2 10-1 100 101 Single Pulse TC = 25°C Per Unit Base = R th(j-f) = 4.0°C/W 100 10-1 10-1 10-2 10-2 10-3 Zth = Rth • (NORMALIZED VALUE) 10-5 TIME, (s) 10-4 10-3 10-3