CM50DY-12H Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Dual IGBTMOD™ H-Series Module 50 Amperes/600 Volts A B C F K Q - DIA. (2 TYP.) E2 G2 F M J C2E1 E2 G1 E1 D C1 N R S - M5 THD (3 TYP.) Description: Powerex IGBTMOD™ Modules are designed for use in switching applications. Each module consists of two IGBT Transistors in a half-bridge configuration with each transistor having a reverseconnected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. (3 TYP.) R R H .110 TAB H L P E G G2 E2 E2 C2E1 C1 E1 G1 Outline Drawing and Circuit Diagram Dimensions Inches Millimeters Dimensions Inches Millimeters A 3.70 94.0 K 0.67 17.0 B 3.150±0.01 80.0±0.25 L 0.63 16.0 C 1.57 40.0 M 0.51 13.0 D 1.34 34.0 N 0.47 12.0 E 1.22 Max. 31.0 Max. P 0.28 7.0 F 0.90 23.0 Q 0.256 Dia. Dia. 6.5 G 0.85 21.5 R 0.16 4.0 H 0.79 20.0 S M5 Metric M5 J 0.71 18.0 Features: □ Low Drive Power □ Low VCE(sat) □ Discrete Super-Fast Recovery (70ns) Free-Wheel Diode □ High Frequency Operation (20-25kHz) □ Isolated Baseplate for Easy Heat Sinking Applications: □ AC Motor Control □ Motion/Servo Control □ UPS □ Welding Power Supplies □ Laser Power Supplies Ordering Information: Example: Select the complete part module number you desire from the table below -i.e. CM50DY-12H is a 600V (VCES), 50 Ampere Dual IGBTMOD™ Power Module. Type Current Rating Amperes VCES Volts (x 50) CM 50 12 225 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM50DY-12H Dual IGBTMOD™ H-Series Module 50 Amperes/600 Volts Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings Symbol CM50DY-12H Units Junction Temperature Tj –40 to 150 °C Storage Temperature Tstg –40 to 125 °C Collector-Emitter Voltage (G-E SHORT) VCES 600 Volts Gate-Emitter Voltage VGES ±20 Volts IC 50 Amperes ICM 100* Amperes Collector Current Peak Collector Current Diode Forward Current IF 50 Amperes Diode Forward Surge Current IFM 100* Amperes Power Dissipation Pd 250 Watts – 17 in-lb Max. Mounting Torque M5 Terminal Screws Max. Mounting Torque M6 Mounting Screws – 26 in-lb Module Weight (Typical) – 190 Grams VRMS 2500 Volts V Isolation * Pulse width and repetition rate should be such that device junction temperature does not exceed the device rating. Static Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Collector-Cutoff Current ICES VCE = VCES, VGE = 0V – – 1.0 mA Gate Leakage Current IGES VGE = VGES, VCE = 0V – – 0.5 µA Gate-Emitter Threshold Voltage VGE(th) IC = 5mA, VCE = 10V 4.5 6.0 7.5 Volts Collector-Emitter Saturation Voltage VCE(sat) IC = 50A, VGE = 15V – 2.1 2.8** Volts IC = 50A, VGE = 15V, Tj = 150°C – 2.15 – Volts Total Gate Charge QG VCC = 300V, IC = 50A, VGS = 15V – 150 – nC Diode Forward Voltage VFM IE = 50A, VGS = 0V – – 2.8 Volts Min. Typ. Max. Units – – ** Pulse width and repetition rate should be such that device junction temperature rise is negligible. Dynamic Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Resistive Turn-on Delay Time td(on) Load Rise Time Switching Turn-off Delay Time Times Fall Time Test Conditions VGE = 0V, VCE = 10V, f = 1MHz 5.0 nF – – 1.8 nF – – 1.0 nF – – 200 ns tr VCC = 300V, IC = 50A, – – 300 ns td(off) VGE1 = VGE2 = 15V, RG = 13Ω – – 200 ns – – 300 ns tf Diode Reverse Recovery Time trr IE = 50A, diE/dt = –100A/µs – – 110 ns Diode Reverse Recovery Charge Qrr IE = 50A, diE/dt = –100A/µs – 0.14 – µC Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified 226 Characteristics Symbol Test Conditions Min. Typ. Max. Units Thermal Resistance, Junction to Case Rth(j-c) Per IGBT – – 0.50 °C/W Thermal Resistance, Junction to Case Rth(j-c) Per FWDi – – 1.00 °C/W Contact Thermal Resistance Rth(c-f) Per Module, Thermal Grease Applied – – 0.075 °C/W Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM50DY-12H Dual IGBTMOD™ H-Series Module 50 Amperes/600 Volts 100 15 80 11 60 40 10 9 20 7 80 60 40 20 0 0 2 4 6 8 10 VGE = 15V Tj = 25°C Tj = 125°C 4 3 2 1 0 0 4 8 12 16 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) GATE-EMITTER VOLTAGE, VGE, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) 0 20 80 100 CAPACITANCE VS. VCE (TYPICAL) 6 IC = 50A 4 2 CAPACITANCE, Cies, Coes, Cres, (nF) EMITTER CURRENT, IE, (AMPERES) IC = 100A 101 Cies 100 Coes VGE = 0V f = 1MHz IC = 20A 8 12 16 20 0 0.8 1.6 2.4 3.2 4.0 GATE-EMITTER VOLTAGE, VGE, (VOLTS) EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 103 103 REVERSE RECOVERY TIME, t rr, (ns) tf td(off) td(on) VCC = 300V VGE = ±15V RG = 13Ω Tj = 125°C tr 101 COLLECTOR CURRENT, IC, (AMPERES) 102 Irr 100 t rr di/dt = -100A/µsec Tj = 25°C 101 100 101 EMITTER CURRENT, IE, (AMPERES) 100 101 102 GATE CHARGE, VGE 101 102 Cres COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 10-1 102 REVERSE RECOVERY CURRENT, Irr, (AMPERES) 4 10-1 10-1 100 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 0 101 100 60 Tj = 25°C 8 102 40 101 Tj = 25°C 0 20 COLLECTOR-CURRENT, IC, (AMPERES) 102 10 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) VCE = 10V Tj = 25°C Tj = 125°C 8 0 SWITCHING TIME, (ns) 5 12 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) VGE = 20V Tj = 25oC COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) 100 COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) TRANSFER CHARACTERISTICS (TYPICAL) OUTPUT CHARACTERISTICS (TYPICAL) IC = 50A 16 VCC = 200V VCC = 300V 12 8 4 0 0 50 100 150 200 250 GATE CHARGE, QG, (nC) 227 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 10-3 101 100 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) 10-2 10-1 100 10-1 10-1 10-2 10-2 10-3 10-5 TIME, (s) 228 101 Single Pulse TC = 25°C Per Unit Base = R th(j-c) = 0.5°C/W 10-4 10-3 10-3 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-c) Zth = Rth • (NORMALIZED VALUE) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-c) Zth = Rth • (NORMALIZED VALUE) CM50DY-12H Dual IGBTMOD™ H-Series Module 50 Amperes/600 Volts 10-3 101 100 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 10-2 10-1 100 101 Single Pulse TC = 25°C Per Unit Base = R th(j-c) = 1.0°C/W 10-1 10-1 10-2 10-2 10-3 10-5 TIME, (s) 10-4 10-3 10-3