Mimix CMM2308-AJ-0G0T 800-2700 mhz high dynamic range amplifier Datasheet

800-2700 MHz
High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ
Features
+17 dBm Output Power
<2.2 dB Noise Figure
Low Current: 70 mA, Typ.
Single +3V to +6V Supply
DC Blocked >2:1 VSWR
Low-Cost SOIC-8 Plastic Package
Functional Block Diagram
Vd 1
8 GND
GND 2
7 GND
RF IN
3
6 RF OUT
GND
4
5 GND
Applications
Power Amplifier Drivers
PCS Medium PowerAmplifiers
Medium PowerWLANs
Base Station Receivers
Absolute Maximum Ratings
Drain Voltage (+Vd)
Drain Current (Id)
RF Input Power
Power Dissipation
Thermal Resistance
Storage Temperature
Operating Temperature
Channel Temperature
Soldering Temperature
Description
The Mimix CMM2308 is a high dynamic range, pin-compatible,
second source for the TriQuint® 9132 and the Mini-Circuits®
VNA. Providing comparable gain and lower noise figure than
either of the existing standard amplifiers at 25% less drain
current, the CMM2308 is an excellent choice for power
sensitive applications, while delivering more design margin.
Packaged in a low-cost surface mount SOIC-8 package, the
CMM2308 will drop into existing designs and offers
improved features and performance.
+7 V
150 mA
15 dBm
1.0 W
55 ºC/W
-65 ºC to +150 ºC
-40 ºC to +80 ºC
175 ºC
260 ºC for 5 Sec
Recommended Operating Conditions
Parameter
Typ
Units
Parameter
Typ
Units
Drain Voltage (+Vd )
3.0 to 6.0
Volts
Operating Temperature (PC Board)
-40 to +70
°C
Electrical Characteristics
The following specifications are guaranteed at room temperature with drain voltage (+Vd ) = 5.0 V ±5% at 2.5 GHz.
Parameter
Condition
Frequency Range
Small Signal Gain
N oi se F i gure
Power O utput @ 1 dB Compression
Output 3rd Order Intercept
Input Return Loss
Output Return Loss
DC Supply Current
Supply Voltage
Min
800
17.5
1. 8 to 2. 5 G H z
15. 5
3
Typ
19.0
2. 2
17. 0
27
10
10
70
5
Max
Units
2700
MHz
dB
dB
dB m
dBm
dB
dB
mA
V
80
6
TriQuint and Mini-Circuits are trademarks of their respective corporations.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
800-2700 MHz
High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ
Connection Diagram and Pin Description
Vd 1
8 GND
GND 2
7 GND
RF IN
3
6 RF OUT
GND
4
5 GND
Pin #
1
2
3
4
5
6
7
8
Name
+V d
GND
RF IN
GND
GND
RF OUT
GND
GND
Description
Drain voltage. Connect to positive supply
Ground
RF input (Internally DC blocked)
Ground
Ground
RF output (Internally DC blocked)
Ground
Ground
Typical Performance
The following typical performance parameters were tested in
the test circuit shown at room temperature and with a drain
voltage (+Vd) = 5 V, unless otherwise specified.
Test Circuit Diagram
0.01µF
29
RF IN
Gain (dB)
25
17
7
3
6
4
5
RF OUT
3V
4V
5V
6V
9
500
1000
1500
2000
Frequency (MHz)
2500
3000
Gain vs Frequency vs Temperature @ 5V
Gain vs Vd vs Temperature @ 1.8 GHz
29
28
25
26
Gain (dB)
Gain (dB)
8
2
21
13
21
17
13
9
800 900
-20 °C
0 °C
+25 °C
+70 °C
24
20
18
2400 2500
1500
1800 2000
Frequency (MHz)
3
-20 °C
0 °C
+25 °C
+70 °C
20
19
18
17
1500
1800 2000
Frequency (MHz)
2400 2500
6
4
5
Supply Voltage (Vd)
Power Output (P-1) vs Frequency vs Vd @ 25 °C
Power Output (P-1) (dBm)
21
16
800 900
-20 °C
0 °C
+25 °C
+70 °C
22
Power Output (P-1) vs Frequency vs Temperature @ 5V
Power Output (P-1) (dBm)
1
+5V
Gain vs Frequency vs Vd
24
3V
5V
6V
21
18
15
12
9
800 900
1500
1800 2000
Frequency (MHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
2400 2500
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
800-2700 MHz
High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ
Typical Performance (cont.)
OIP3 vs Frequency vs Vd @ 25 °C
30
3.00
27
2.75
OIP3
Noise Figure (dB)
Noise Figure vs Frequency vs Vd @ 25 °C
3.25
2.50
2.25
3V
5V
6V
2.00
1.75
800 900
24
21
18
15
800 900
24002500
1500
1800 2000
Frequency (MHz)
30
2.75
27
OIP3
+70 °C
2.75
2.50
+25 °C
2.25
2.00
1500
1800 2000
Frequency (MHz)
24
21
18
-20 °C
1.75
800 900
-20 °C
0 °C
+25 °C
+70 °C
15
800 900
24002500
-4
-4
Output RL (S22)
Input RL (S11)
S22 vs Frequency vs Vd
0
-8
-16
-20
500
3V
4V
5V
6V
1000
1500
2000
Frequency (MHz)
-12
3V
4V
5V
6V
-16
-20
500
3000
2500
-8
1000
3000
2500
3000
24
Power Out
15
18
12
10
Efficiency
6
5
0
-14
-8
Power In (dBm)
-2
4
Reverse Gain (S22)
30
Efficiency (%)
Power Out (dBm)
2500
-15
Vd = 4.8 V & Frequency = 1.88 GHz
20
0
-20
1500
2000
Frequency (MHz)
S12 vs Frequency vs Vd
Power In vs Power Out & Efficiency
25
2400 2500
1500
1800 2000
Frequency (MHz)
S11 vs Frequency vs Vd
0
-12
2400 2500
1500
1800 2000
Frequency (MHz)
OIP3 vs Frequency vs Temperature @ 5V
Noise Figure vs Frequency vs Temperature @ 5V
3.25
Noise Figure (dB)
3V
5V
6V
-25
-35
-45
3V
4V
5V
6V
-55
-65
500
1000
1500
2000
Frequency (MHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
800-2700 MHz
High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ
Adjacent Channel Power
Test Configuration and Evaluation
/4 DQPSK Modulation, Vd = 4.8 V
Mimix tests the CMM2308 on an FR4 PC test board. FR4 was
chosen for its low loss characteristics at frequencies up to 2.5
GHz. Plated through hole connections from the top of the
board to the backside ground plane minimizes inductance in
the ground connections. These through hole connections are
as close as possible to each ground pin.
For evaluation purposes Mimix offers a prototype
evaluation board (PB-CMM2308-AJ) for the CMM2308.
Please call the factory or a local representative for more
information.
Handling Precaution
Microwave devices are sensitive to electrostatic discharge.
Proper precautions should be taken to avoid ESD damage.
Physical Dimensions
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
800-2700 MHz
High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
The CMM2308 is available in a surface mount SOIC-8 plastic package.
Part Number for Ordering
CMM2308-AJ-0G00
CMM2308-AJ-0G0T
PB-CMM2308-AJ-0000
Package
Matte Tin finished RoHS compliant SOIC-8 package in bulk quantity
Matte Tin finished RoHS compliant SOIC-8 package in tape and reel
Evaluation Board
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
Similar pages