AVAGO CNY17-3-W00E Phototransistor optocoupler high collector-emitter voltage type Datasheet

CNY17-x
Phototransistor Optocoupler High Collector-Emitter
Voltage Type
Data Sheet
Description
The CNY17 contains a light emitting diode optically coupled to a photo-transistor. It is packaged in a
6-pin DIP package and available in wide-lead spacing
option and lead bend SMD option. Collector-emitter
voltage is above 70 V. Response time, tr, is typically
5 µs and minimum CTR is 40% at input current of
10 mA.
Applications
• System appliances, measuring instruments
• Signal transmission between circuits of different
potentials and impedances
• Feedback circuit in power supply
Functional Diagram
PIN NO. AND INTERNAL
CONNECTION DIAGRAM
6
5
4
Features
• High collector-emitter voltage
(VCEO = 70 V)
• High input-output isolation voltage
(Viso = 5000 Vrms)
• Current Transfer Ratio
(CTR: min. 40% at IF = 10 mA, VCE = 5 V)
• Response time
(tr: typ., 5 µs at VCC = 10 V, IC = 2 mA, RL = 100 Ω)
• Dual-in-line package
• UL approved
• CSA approved
• IEC/EN/DIN EN 60747-5-2 approved
• Options available:
– Leads with 0.4" (10.16 mm) spacing (W00)
– Leads bend for surface mounting (300)
– Tape and reel for SMD (500)
– IEC/EN/DIN EN 60747-5-2 approvals (060)
Schematic
ANODE
1
IF
6
+
BASE
VF
CATHODE
1
2
1. ANODE
2. CATHODE
3. NC
–
2
IC 5
3
4. EMITTER
5. COLLECTOR
6. BASE
4
COLLECTOR
EMITTER
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Ordering Information
CNY17-x is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA 88324.
Part
Number
CNY17
RoHS Compliant Option
-1
40%
<CTR<
80%
-2
63%
<CTR<
125%
-3
100%
<CTR<
200%
-4
160%
<CTR<
320%
Package
-000E
-000E
-000E
-000E
300 mil
DIP-6
-300E
-300E
-300E
-300E
300 mil
DIP-6
X
X
-500E
-500E
-500E
-500E
300 mil
DIP-6
X
X
-060E
-060E
-060E
-060E
300 mil
DIP-6
-360E
-360E
-360E
-360E
300 mil
DIP-6
X
X
-560E
-560E
-560E
-560E
300 mil
DIP-6
X
X
-W00E
-W00E
-W00E
-W00E
400 mil
DIP-6
-W60E
-W60E
-W60E
-W60E
400 mil
DIP-6
Surface Gull Tape IEC/EN/DIN
Mount Wing & Reel EN60747-5-2
Quantity
65 pcs
per tube
65 pcs
per tube
X
X
1000 pcs
per reel
X
65 pcs
per tube
X
65 pcs
per tube
X
1000 pcs
per reel
65 pcs
per tube
X
65 pcs
per tube
To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry.
Example 1:
CNY17-1-360E to order product of 300 mil DIP-6 DC Gull Wing Surface Mount package in Tube packaging with
40%<CTR<80%, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant.
Example 2:
CNY17-2-W00E to order product of 400 mil DIP-6 DC in Tube packaging with 63%<CTR<125% and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings
CNY17-X-000E
MODEL
NO.
LEAD FREE
A CNY17 Y Y WW
7.3 ± 0.5
(0.287)
7.62 ± 0.3
(0.3)
3.5 ± 0.5
(0.138)
6.5 ± 0.5
(0.256)
ANODE
DATE
CODE
DIMENSIONS IN MILLIMETERS AND (INCHES)
0.5
TYP.
(0.02)
3.3 ± 0.5
(0.13)
2.8 ± 0.5
(0.110)
2.54 ± 0.25
(0.1)
0.26
(0.010)
0.5 ± 0.1
(0.02)
7.62 ~ 9.98
CNY17-X-060E
7.3 ± 0.5
(0.287)
MODEL
NO.
LEAD FREE
A CNY17- V
Y Y WW
7.62 ± 0.3
(0.3)
3.5 ± 0.5
(0.138)
6.5 ± 0.5
(0.256)
DATE
CODE
DIMENSIONS IN MILLIMETERS AND (INCHES)
0.5
TYP.
(0.02)
3.3 ± 0.5
(0.13)
2.8 ± 0.5
(0.110)
ANODE
2.54 ± 0.25
(0.1)
0.26
(0.010)
0.5 ± 0.1
(0.02)
7.62 ~ 9.98
CNY17-X-W00E
7.3 ± 0.5
(0.287)
MODEL
NO.
LEAD FREE
A CNY17 Y Y WW
ANODE
3.5 ± 0.5
(0.138)
6.5 ± 0.5
(0.256)
6.9 ± 0.5
(0.272)
2.3 ± 0.5
(0.09)
2.8 ± 0.5
(0.110)
DATE
CODE
2.54 ± 0.25
(0.1)
DIMENSIONS IN MILLIMETERS AND (INCHES)
7.62 ± 0.3
(0.3)
0.5 ± 0.1
(0.02)
0.26
(0.010)
10.16 ± 0.5
(0.4)
CNY17-X-300E
MODEL
NO.
LEAD FREE
A CNY17 Y Y WW
ANODE
7.3 ± 0.5
(0.287)
7.62 ± 0.3
(0.3)
0.35 +0.15/-0.10
(0.014)
3.5 ± 0.5
(0.138)
6.5 ± 0.5
(0.256)
1.2 ± 0.1
(0.047)
DATE
CODE
2.54 ± 0.25
(0.1)
1.0 ± 0.25
(0.039)
0.35 ± 0.25
(0.014)
10.16 ± 0.3
(0.4)
DIMENSIONS IN MILLIMETERS AND (INCHES)
2) When using another soldering method such as infrared ray lamp, the temperature may rise partially
in the mold of the device. Keep the temperature on
the package of the device within the condition of (1)
above.
30 seconds
250°C
Temperature (°C)
Solder Reflow Temperature Profile
1) One-time soldering reflow is recommended within
the condition of temperature and time profile shown
at right.
217°C
200°C
150°C
60 sec
25°C
60 ~ 150 sec
90 sec
Time (sec)
Note: Non-halide flux should be used.
Absolute Maximum Ratings
Storage Temperature, TS
–55˚C to +150˚C
Operating Temperature, TA
–55˚C to +100˚C
Lead Solder Temperature, max.
(1.6 mm below seating plane)
260˚C for 10 s
Average Forward Current, IF
60 mA
Reverse Input Voltage, VR
6V
Input Power Dissipation, PI
100 mW
Collector Current, IC
150 mA
Collector-Emitter Voltage, VCEO
70 V
Emitter-Collector Voltage, VECO
6V
Collector-Base Voltage, VCBO
70 V
Collector Power Dissipation
150 mW
Total Power Dissipation
250 mW
Isolation Voltage, Viso
(AC for 1 minute, R.H. = 40 ~ 60%)
5000 Vrms
260°C (Peak Temperature)
60 sec
Electrical Specifications (TA = 25˚C)
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
Forward Voltage
VF
–
1.4
1.7
V
IF = 60 mA
Reverse Current
IR
–
–
10
µA
VR = 6 V
Terminal Capacitance
Ct
–
–
100
pF
V = 0, f = 1 MHz
Collector Dark Current
ICEO
–
–
50
nA
VCE = 10 V
Collector-Emitter Breakdown Voltage
BVCEO
70
–
–
V
IC = 0.1 mA, IF = 0
Emitter-Collector Breakdown Voltage
BVECO
6
–
–
V
IE = 10 µA, IF = 0
Collector-Base Breakdown Voltage
BVCBO
70
–
–
V
IC = 0.1 mA, IF = 0
Collector Current
IC
4
–
32
mA
IF = 10 mA
40
63
100
160
–
–
–
–
80
%
VCE = 5 V
125
200
320
*Current Transfer Ratio
CNY17-1
CTR
CNY17-2
CNY17-3
CNY17-4
Collector-Emitter Saturation Voltage
VCE(sat)
–
–
0.3
V
IF = 10 mA, IC = 2.5 mA
Response Time (Rise)
tr
–
5
10
µs
VCE = 5 V, IC = 10 mA
Response Time (Fall)
tf
–
5
10
µs
RL = 100 Ω
Isolation Resistance
Riso
–
–
Ω
DC 500 V
40 ~ 60% R.H.
Floating Capacitance
V = 0, f = 1 MHz
1 x 1011
Cf
–
2
pF
60
40
20
0
-55
-25
0
25
50
75
100 125
TA – AMBIENT TEMPERATURE – °C
Figure 1. Forward current vs. temperature.
CNY17-1 fig 1
2
200
160
150
VOLTAGE GAIN AV – dB
80
PC – COLLECTOR POWER DISSIPATION – mW
IC
x 100%
IF
* CTR =
IF – FORWARD CURRENT – mA
–
100
50
0
-55
-25
0
25
50
75
100 125
TA – AMBIENT TEMPERATURE – °C
Figure 2. Collector power dissipation vs. temperaCNY17-1 fig 2
ture.
IF = 10 mA
VCC = 5 V
TA = 25°C
0
-2
-4
-6
RL = 200 Ω
RL = 150 Ω
RL = 75 Ω
-8
-10
0.5 1
2
5 10 20
50 100 200 500
f – FREQUENCY – kHz
Figure 3. Frequency response.
CNY17-1 fig 3
100
TA = 50°C
TA = 0°C
TA = 25°C
TA = -25°C
50
20
10
5
2
1
0
0.5
1.0
1.5
2.0
2.5
3.0
160
140
RBE =
120
100
80
60
100 kΩ
40
500 kΩ
20
0
0
2
VF – FORWARD VOLTAGE – V
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
RELATIVE CURRENT TRANSFER RATIO – %
0.16
100
50
-25
0
25
50
75
100
CNY17-1 fig 7
0.08
0.06
0.04
0.02
tf
2
1
0.1
0.2
RL – LOAD RESISTANCE – kΩ
Figure 10. Response time vs. load resistance.
CNY17-1 fig 10
0
25
50
75
100
CNY17-1 fig 8
0.5
IC = 0.5 mA
4
IC = 1 mA
3
IC = 2 mA
2
IC = 3 mA
IC = 5 mA
1
0
0
2.5
5.0
7.5
20
IF = 10 mA
15
10
IF = 5 mA
5
IF = 2 mA
0
2
4
6
8
10
10.0
IF – FORWARD CURRENT – mA
Figure 11. Collector-emitter saturation voltage vs.
CNY17-1 fig 11
forward current.
10-6
VCE = 10 V
10-7
10-8
10-9
10-10
10-11
10-12
10-13
-30
0
20
40
60
80
Figure 9. Collector darkCNY17-1
current vs.fig
temperature.
9
TA = 25°C
5
IF = 20 mA
25
100
TA – AMBIENT TEMPERATURE – °C
Figure 8. Collector-emitter saturation voltage vs.
temperature.
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
RESPONSE TIME – µs
VCC = 5 V
TA = 25°C
0.05
-25
30
Figure 6. Collector current
vs. collector-emitter
voltCNY17-1
fig 6
age.
0.10
0
-55
PC (MAX.)
35
VCE – COLLECTOR-EMITTER VOLTAGE – V
0.12
6
IF = 10 mA
tr
0.5
0.02
50
TA – AMBIENT TEMPERATURE – °C
Figure 7. Relative current transfer ratio vs. temperature.
5
20
IF = 10 mA
IC = 2.5 mA
0.14
TA – AMBIENT TEMPERATURE – °C
10
10
Figure 5. Current transfer
ratio vs.figforward
current.
CNY17-1
5
IF = 10 mA
VCE = 5 V
0
-55
5
TA = 25°C
40 IF = 30 mA
0
IF – FORWARD CURRENT – mA
Figure 4. Forward current
vs. forward
CNY17-1
fig 4voltage.
150
45
VCE = 5 V
TA = 25°C
180
ICEO – COLLECTOR DARK CURRENT – A
200
200
IC – COLLECTOR CURRENT – mA
TA = 75°C
CTR – CURRENT TRANSFER RATIO – %
IF – FORWARD CURRENT – mA
500
12.5
Test Circuit for Response Time
Test Circuit for Frequency Response
VCC
INPUT
VCC
RL
RD
RD
OUTPUT
OUTPUT
~
INPUT
10%
OUTPUT
90%
ts
td
tr
tf
For product information and a complete list of distributors, please go to our website:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologie s Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0536EN
AV02-0772EN - October 18, 2007
RL
Similar pages