CLARE CPC1017N 4-pin sop optomosâ® relay Datasheet

CPC1017N
4-Pin SOP OptoMOS® Relays
Parameter
Blocking Voltage
Load Current
Max On-resistance
LED Current to operate
Rating
60
100
16
1
Description
Units
VP
mA
Ω
mA
Features
• Designed for use in security systems complying
with EN50130-4
• Only 1mA of LED current required to operate
• Small 4-Pin SOP Package
• TTL/CMOS Compatible input
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 1500Vrms Input/Output Isolation
• No EMI/RFI Generation
• Immune to radiated EM fields
• SMD Pick & Place, Wave Solderable
• Tape & Reel Version Available
The CPC1017N is a miniature 1-Form-A (single
pole, normally open) solid state relay in a 4-pin SOP
package that employs optically coupled MOSFET
technology to provide 1500Vrms of input/output
isolation. The super-efficient MOSFET switches and
photovoltaic die use Clare’s patented OptoMOS
architecture. The optically coupled input is controlled
by a highly efficient GaAIAs infrared LED. The
CPC1017N uses Clare’s state of the art
double-molded vertical construction packaging to
produce one of the world’s smallest relays. The
CPC1017N offers board space savings of at least
20% over the competitor’s larger 4-pin SOP relay.
Approvals
• UL Recognized Component: File # E76270
• EN/IEC 60950-1 Compliant
• CSA Certified Component: Certificate # 1172007
Ordering Information
Applications
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
Part #
CPC1017N
CPC1017NTR
Description
4-Pin SOP (100/tube)
4-Pin SOP (2000/reel)
Pin Configuration
+ Control
– Control
1
4
3
2
Load
Load
Switching Characteristics of Normally
Open (Form A) Devices
Control
ILOAD
+
90%
10%+
tOFF
Pb
RoHS
2002/95/EC
DS-CPC1017N-R05
tON
e3
www.clare.com
1
CPC1017N
Absolute Maximum Ratings
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation
Total Power Dissipation 1
Isolation Voltage Input to Output
Operational Temperature
Storage Temperature
1
Ratings
60
5
50
1
70
400
1500
-40 to +85
-40 to +125
Units
VP
V
mA
A
mW
mW
Vrms
ºC
ºC
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate Linearly 3.33 mw / ºC
Electrical absolute maximum ratings are at 25ºC
Electrical Characteristics
Parameter
Output Characteristics @ 25ºC
Load Current
Continuous 1
Peak
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics @ 25ºC
Input Control Current 3
Input Dropout Current
Input Voltage Drop
Reverse Input Current
Common Characteristics @ 25ºC
Capacitance Input to Output
1
2
3
2
Conditions
Symbol
Min
Typ
Max
Units
IF=2mA
t=10ms
IL=100mA
VL=60V
IL
ILPK
RON
ILEAK
-
-
100
350
16
1
mA
mA
Ω
IF=5mA, VL=10V
IF=5mA, VL=10V
50V, f=1MHz
tON
tOFF
COUT
-
25
10
10
-
ms
ms
pF
IL=100mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.3
0.9
-
0.4
1.2
-
1
1.4
10
mA
mA
V
μA
-
CI/O
-
1
-
pF
μA
Load current derates linearly from 100mA @ 25ºC to 80mA @ 80ºC.
Measurement taken within 1 second of on time.
For applications requiring high temperature operation (greater than 60ºC) an LED drive current of 3mA is recommended.
www.clare.com
R05
CPC1017N
PERFORMANCE DATA*
CPC1017N
Typical LED Forward Voltage Drop
(N=50, TA=25ºC, IF=5mADC)
35
35
20
15
10
5
20
15
10
0
1.19
1.21
1.23
1.25
LED Forward Voltage Drop (V)
CPC1017N
Typical IF for Switch Dropout
(N=50, TA=25ºC, IL=100mA)
25
25
Device Count (N)
20
15
10
5
0.35
0.40 0.45 0.50 0.55
LED Current (mA)
Load Current (mA)
30
25
20
15
10
25
15
10
5
1.2
1.3
1.4
1.5
0.26
1.6
0.016
160
0.014
140
0.012
120
100
IF=5mA
80
IF=2mA
60
0.006
-20
0
20
81
79
77
-20
0
20
40
60
Temperature (ºC)
40
60
80
100
0
-40
120
-20
0
80
100
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
IF=5mA
IF=2mA
-40
-20
0
20
40
60
Temperature (ºC)
80
20
40
60
Temperature (ºC)
80
100
CPC1017N
Typical LED Forward Voltage Drop
vs. Temperature
LED Forward Voltage Drop (V)
Turn-Off (ms)
83
0.38
0.008
CPC1017N
Typical Turn-Off vs. Temperature
(IL=50mA)
CPC1017N
Typical Blocking Voltage
vs. Temperature
85
0.36
0.010
Temperature (ºC)
87
0.34
CPC1017N
Typical Load Current vs. Temperature
Blocking Voltage (VP)
89
0.32
CPC1017N
Typical Leakage vs. Temperature
(Measured Across Pins 3 & 4)
(VL=60V)
-40
91
0.30
Turn-Off (ms)
0.002
-40
0.28
Turn-On (ms)
180
92
0.60
0
1.1
0
90
0.55
5
0
88
0.50
10
0.004
86
0.45
15
20
84
0.40
20
5
82
0.35
CPC1017N
Typical Turn-Off Time
(N=50, TA=25ºC, IL=100mA, IF=5mA)
40
80
Blocking Voltage (VP)
5
LED Current (mA)
CPC1017N
Typical Turn-On Time
(N=50, TA=25ºC, IL=100mA, IF=5mA)
1.0
CPC1017N
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
10
0.30
20
0.60
15
7.4
7.3
0
0.30
35
7.0
7.1
7.2
On-Resistance (Ω)
Leakage (μA)
0
20
0
6.9
6.8
Device Count (N)
1.17
Device Count (N)
25
5
0
Device Count (N)
Device Count (N)
25
CPC1017N
Typical IF for Switch Operation
(N=50, TA=25ºC, IL=100mA)
25
30
Device Count (N)
Device Count (N)
30
CPC1017N
Typical On-Resistance Distribution
(N=50, TA=25ºC, IL=100mA)
100
1.8
1.6
1.4
IF=50mA
1.2
IF=10mA
IF=5mA
1.0
0.8
-40
-20
0
20
40
60
80
Temperature (ºC)
100
120
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R05
www.clare.com
3
CPC1017N
PERFORMANCE DATA*
14
0.6
12
0.5
0.4
0.3
0.2
45
50
0
10
15
20
25
30
35
40
45
150
Load Current (mA)
2.5
2.0
1.5
1.0
CPC1017N
Typical Load Current vs. Load Voltage
(TA=25ºC, IF=5mA)
0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
Instantaneous
IF=5mA
6
50
0
-50
-150
-1.5
-1.0
-0.5
0
0.5
Load Voltage (V)
1.0
1.5
-20
0
20
40
60
Temperature (ºC)
80
100
CPC1017N
Energy Rating Curve
100
-100
0.5
Steady State
8
2
-40
50
LED Forward Current (mA)
CPC1017N
Typical IF for Switch Operation
vs. Temperature
(IL=80mA)
3.0
5
Load Current (A)
10 15 20 25 30 35 40
LED Forward Current (mA)
IF=5mA
10
4
0
5
CPC1017N
Typical On-Resistance vs. Temperature
(IL=Max Rated @ Temperature)
IF=2mA
0.1
0
LED Current (mA)
0.7
On-Resistance (Ω)
3.0
2.7
2.4
2.1
1.8
1.5
1.2
0.9
0.6
0.3
0
CPC1017N
Typical Turn-Off vs. LED Forward Current
(IL=100mA)
Turn-Off (ms)
Turn-On (ms)
CPC1017N
Typical Turn-On vs. LED Forward Current
(IL=100mA)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10μs 100μs 1ms 10ms 100ms
1s
10s 100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.clare.com
R05
Manufacturing Information
Moisture Sensitivity
Clare has characterized the moisture reflow sensitivity
of this package, and has determined that this
component must be handled in accordance with
IPC/JEDEC standard J-STD-033 moisture sensitivity
level (MSL), level 3 classification.
Pb
Soldering Reflow Profile
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
e3
RoHS
2002/95/EC
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
MECHANICAL DIMENSIONS
4-Pin SOP Package
Recommended PCB Land Pattern
4.089 ± 0.203
(0.161 ± 0.008)
0.200 ± 0.025
(0.008 ± 0.001)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003)
0.60
(0.0217)
0.432 ± 0.127
(0.017 ± 0.005)
1.02 ± 0.025
(0.040 ± 0.001)
Pin 1
2.54 Typ
(0.100 Typ)
5.60
(0.2205)
1.30
(0.0512)
2.54
(0.10)
2.184 Max
(0.086 Max)
0.0254 - 0.102
(0.001 - 0.004)
Dimensions
mm
(inches)
0.381 TYP.
(0.015 TYP.)
Tape and Reel Packaging for 4-Pin SOP Package
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=12.00 Max
(0.472 Max)
Pin 1
B0=4.70
(0.185)
K0=2.70
(0.106)
K1=2.30
(0.091)
P=8.00
(0.315)
A0=6.50
(0.256)
User Direction of Feed
Embossed
Carrier
Embossment
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
5
Specification: DS-CPC1017N-R05
©Copyright 2008, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
9/2/08
Similar pages