Ordering number:ENN6077 PNP/NPN Silicon Epitaxial Planar Transistors CPH3107/3207 DC/DC Converter Applications Applications Package Dimensions · Relay drivers, lamp drivers, motor drivers, and strobes. unit:mm 2150A [CPH3107/3207] 2.9 · Adoption of MBIT processes. · High current capacitance. · Low collector-to-emitter saturation voltage. · High-speed switching. · Ultrasmall-sized package permitting applied sets to be made small and slim (0.9mm). · High allowable power dissipation. 0.15 0.6 0.4 0.2 Features 3 2 1 2.8 0.6 1.6 0.05 0.2 1.9 0.7 0.9 1 : Base 2 : Emitter 3 : Collector ( ) : PNP Specifications SANYO : CPH3 Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (–)15 V Collector-to-Emitter Voltage VCEO VEBO (–)15 V (–)5 V IC (–)6 A Collector Current (Pulse) ICP (–)9 A Base Current IB PC (–)1.2 A 0.9 W 150 ˚C –55 to +150 ˚C Emitter-to-Base Voltage Collector Current Collector Dissipation Junction Temperature Tj Storage Temperature Tstg Mounted on a ceramic board (600mm2×0.8mm) Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=(–)12V, IE=0 (–)0.1 µA Emitter Cutoff Current IEBO (–)0.1 µA DC Current Gain hFE VEB=(–)4V, IC=0 VCE=(–)2V, IC=(–)500mA fT VCE=(–)2V, IC=(–)500mA Gain-Bandwidth Product Output Capacitance Cob 200 VCB=(–)10V, f=1MHz 560 (140) MHz 250 MHz (82)46 Marking : CPH3107 : AG, CPH3207 : CG pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71299TS (KOTO) TA-2031 No.6077–1/5 CPH3107/3207 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage VCE(sat) VBE(sat) Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Ratings Conditions min max IC=(–)3A, IB=(–)60mA (–)100 (–)150 mV IC=(–)3A, IB=(–)60mA (–)0.85 (–)1.2 V V(BR)CBO IC=(–)10µA, IE=0 V(BR)CEO IC=(–)1mA, RBE=∞ Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time V(BR)EBO ton Storage Time tstg See specified test circuit. tf See specified test circuit. Turn-OFF Time Unit typ IC=(–)10µA, IC=0 (–)15 V (–)15 V (–)5 V See specified test circuit. (30)32 ns (120) ns 250 ns (14)10 ns Switching Time Test Circuit PW=20µs D.C.≤1% I B1 OUTPUT IB 2 I NPUT RB 50Ω RL VR + + 100µF 470µF -5V 5V 20IB1=-20IB2=IC=3A (For PNP, the polarity is reversed.) I C - VCE -3.0 -10mA -90mA -80mA -70mA -60mA -50mA -200 -300 2.0 90mA 80mA 70mA 60mA 50mA 40mA -400 0 0 -500 100 Collector-to-Emitter Voltage, VCE – mV -0.9 I C - VBE 1.0 0.9 Collector Current, IC – A -25°C 25°C -0.7 Ta=75°C Collector Current, IC – A -0.8 -0.5 -0.4 -0.3 0.6 0.5 0.4 0.3 0.2 0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 Base-to-Emitter Voltage, VBE – V -0.8 -0.9 I C - VBE CPH3207 VCE=2V 0.7 -0.1 -0.1 500 0.8 -0.2 0 0 400 Collector-to-Emitter Voltage, VCE – mV CPH3107 VCE=-2V -0.6 IB=0 300 Ta=75°C -1.0 200 -25°C -100 10mA 3.0 1.0 IB=0 0 0 4.0 25°C -2.0 20mA 30mA mA A 0m -20mA -1.0 CPH3207 -30mA mA -40 -10 Collector Current, IC – A -4.0 I C - VCE 5.0 100 CPH3107 Collector Current, IC – A -5.0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Base-to-Emitter Voltage, VBE – V No.6077–2/5 CPH3107/3207 hFE - I C 1000 7 DC Current Gain, hFE DC Current Gain, hFE -25°C 25°C 100 7 5 3 7 5 3 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 10 0.01 5 7 -10 2 5 7 0.1 3 fT - IC 100 7 5 3 2 10 7 5 3 2 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 2 100 7 5 3 2 10 7 5 3 2 2 3 5 100 7 5 3 2 10 7 5 3 2 5 7 2 -10 °C 75 5°C =-2 a T ° 25 C -10 7 5 3 2 2 3 5 7 -0.1 2 3 5 7 -1.0 Collector Current, IC – A 2 3 5 7 -10 Collector-to-Emitter Saturation Voltage, VCE(sat) – mV Collector-to-Emitter Saturation Voltage, VCE(sat) – mV 3 2 -1.0 -0.01 7 1.0 2 3 5 100 7 5 3 2 10 7 5 3 2 2 3 5 7 2 10 3 Collector-to-Base Voltage, VCB – V CPH3107 IC / IB =20 3 2 5 3 2 1.0 1.0 3 VCE(sat) - IC -100 7 5 3 CPH3207 f =1MHz Collector-to-Base Voltage, VCB – V -1000 7 5 2 Cob - VCB 1000 7 5 Output Capacitance, Cob – pF Output Capacitance, Cob – pF 3 2 3 7 0.1 Collector Current, IC – A CPH3107 f =1MHz 2 5 7 10 3 3 1.0 0.01 5 Cob - VCB 1.0 -1.0 2 CPH3207 VCE=2V Collector Current, IC – A 1000 7 5 5 7 1.0 3 fT - IC 1000 7 5 Gain Bandwidth Product, fT – MHz Gain Bandwidth Product, fT – MHz CPH3107 VCE=-2V 3 2 1.0 -0.01 2 Collector Current, IC – A Collector Current, IC – A 1000 7 5 25°C 100 3 2 -25°C 2 2 10 -0.01 Ta=75°C 5 3 2 CPH3207 VCE=2V 7 Ta=75°C 5 hFE - I C 1000 CPH3107 VCE=-2V VCE(sat) - IC 1000 7 5 CPH3207 IC / IB =20 3 2 100 7 5 Ta 3 2 °C 75 °C 25 5°C =-2 10 7 5 3 2 1.0 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector Current, IC – A No.6077–3/5 CPH3107/3207 Collector-to-Emitter Saturation Voltage, VCE(sat) – mV CPH3107 IC / IB =50 3 2 °C 75 °C 25 C 5° -100 7 5 =-2 Ta 3 2 -10 7 5 3 Collector-to-Emitter Saturation Voltage, VCE(sat) – mV VCE(sat) - IC -1000 7 5 VCE(sat) - IC 1000 7 5 CPH3207 IC / IB =50 3 2 °C 75 100 7 5 °C -25 = Ta 3 2 10 7 5 3 2 2 -1.0 -0.01 1.0 0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 5 7 -10 2 3 5 7 0.1 Collector Current, IC – A Base-to-Emitter Saturation Voltage, VBE(sat) – mV 7 5 3 2 -25°C 7 3 2 -100 -0.01 2 3 5 7 -0.1 2 5 7 -1.0 3 2 3 Ta=-25°C 7 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 PC - Ta CPH3107/3207 0µ s 10 s DC 10 0m op era tio n Collector Dissipation, PC – W ms IC s 1m Collector Current, IC – A 25°C 75°C 5 10 ICP s CPH3107/3207 Ta=25°C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2×0.8mm) 0.01 0.1 7 10 2 1.2 3 2 3 2 5 3 A S O 1.0 7 5 0.1 7 5 3 Collector Current, IC – A 0µ 3 2 2 5 100 0.01 5 7 -10 50 10 7 5 7 1.0 CPH3207 IC / IB =50 Collector Current, IC – A 2 5 7 1000 Ta=75°C 25°C 5 3 VBE(sat) - IC 10000 Base-to-Emitter Saturation Voltage, VBE(sat) – mV CPH3107 IC / IB =50 -1000 2 Collector Current, IC – A VBE(sat) - IC -10000 °C 25 2 3 5 7 1.0 2 3 5 7 10 Collector-to-Emitter Voltage, VCE – V 2 3 5 1.0 M ou nte 0.8 do na ce ram 0.6 ic bo ard (6 00 0.4 mm 0.2 0 0 20 40 60 80 100 2 ×0 .8m 120 m) 140 160 Ambient Temperature, Ta – °C No.6077–4/5 CPH3107/3207 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 1999. Specifications and information herein are subject to change without notice. PS No.6077–5/5