CPH3438 Ordering number : ENN8128 N-Channel Silicon MOSFET CPH3438 General-Purpose Switching Device Applications Features • • • Low ON-resistance. Ultrahigh-speed switching. 4V drive. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 30 Gate-to-Source Voltage VGSS ±20 V ID 4.5 A Drain Current (DC) Drain Current (Pulse) IDP PD Allowable Power Dissipation V PW≤10µs, duty cycle≤1% 18 A Mounted on a ceramic board (900mm2✕0.8mm) 1.0 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current V(BR)DSS IDSS IGSS Conditions ID=1mA, VGS=0 VDS=30V, VGS=0 Ratings min typ Unit max 30 V 1 ±10 µA µA Forward Transfer Admittance VGS(off) yfs VGS=±16V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=2A RDS(on)1 RDS(on)2 ID=2A, VGS=10V ID=1A, VGS=4.5V 33 43 Static Drain-to-Source On-State Resistance 53 74 mΩ ID=1A, VGS=4V VDS=10V, f=1MHz 62 87 mΩ Input Capacitance RDS(on)3 Ciss 526 pF Output Capacitance Coss 79 pF Reverse Transfer Capacitance Crss VDS=10V, f=1MHz VDS=10V, f=1MHz 63 pF Turn-ON Delay Time td(on) tr See specified Test Circuit. 11 ns See specified Test Circuit. 27 ns Cutoff Voltage Rise Time Turn-OFF Delay Time Fall Time td(off) tf 1.2 2.2 2.6 3.7 V S mΩ See specified Test Circuit. 50 ns See specified Test Circuit. 36 ns Marking : ZN Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1004PE TS IM TB-00000787 No.8128-1/4 CPH3438 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Total Gate Charge Qg VDS=10V, VGS=10V, ID=4.5A 11.3 nC Gate-to-Source Charge Qgs VDS=10V, VGS=10V, ID=4.5A 2.2 nC Gate-to-Drain “Miller” Charge Qgd VDS=10V, VGS=10V, ID=4.5A Diode Forward Voltage VSD IS=4.5A, VGS=0 Package Dimensions unit : mm 2152A 2 0.2 10V 0V ID=2A RL=7.5Ω VOUT 0.6 VIN D PW=10µs D.C.≤1% 0.6 1.6 2.8 0.05 2 V VDD=15V VIN 0.15 0.4 1 1.2 Switching Time Test Circuit 2.9 3 nC 0.87 G 1 : Gate 2 : Source 3 : Drain CPH3438 P.G 50Ω S 0.7 0.9 0.2 1.9 SANYO : CPH3 ID -- VDS V 8 1.5 1.0 2 VGS=2.5V 0.5 0 0 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 Drain-to-Source Voltage, VDS -- V 0.45 0 0.50 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 180 160 140 ID=2A 1A 100 80 60 40 20 0 1 2 3 4 5 6 7 8 Gate-to-Source Voltage, VGS -- V 9 4 5 Gate-to-Source Voltage, VGS -- V 2 IT08405 10 IT08406 3 RDS(on) -- Ta 100 Ta=25°C 120 1 IT08404 RDS(on) -- VGS 200 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 4 25°C 3.0V 2.0 6 5°C --25°C 2.5 Ta= 7 3.0 VDS=10V Drain Current, ID -- A 3.5 ID -- VGS 10 4.0 6.0 10V 8.0 V 4.0 Drain Current, ID -- A 5.0 4.5 V V V 4.5 90 80 4.0V S= VG , V 1A =4.5 I D= VGS , A 1 I D= 70 60 50 =10V A, V GS 2 = ID 40 30 20 10 0 --60 --40 --20 0 20 40 60 80 100 Ambient Temperature, Ta -- °C 120 140 160 IT08407 No.8128-2/4 CPH3438 2 5° 1.0 = Ta 7 --2 5 C °C 75 25 °C 3 2 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 0.5 0.6 0.7 100 7 5 td(off) tf 3 2 td(on) 10 7 5 tr 0.8 0.9 1.0 1.1 IT08409 Ciss, Coss, Crss -- VDS f=1MHz 7 Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 0.4 Ciss 5 3 2 3 2 100 Coss Crss 7 5 3 2 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Drain Current, ID -- A 0 7 10 3 2 Drain Current, ID -- A 7 6 5 4 3 10 7 5 3 2 1 3 2 4 6 8 12 10 Total Gate Charge, Qg -- nC IT08412 PD -- Ta 1.2 25 30 IT08411 <10µs 10 0µ 1m s s 10 ms ID=4.5A DC 10 0m s op era tio 3 2 0.1 7 5 2 20 IDP=18A 1.0 7 5 2 0 15 ASO 5 8 0 10 Drain-to-Source Voltage, VDS -- V VDS=10V ID=4.5A 9 5 IT08410 VGS -- Qg 10 Gate-to-Source Voltage, VGS -- V 0.3 1000 VDD=15V VGS=10V 1.0 0.01 Allowable Power Dissipation, PD -- W 0.01 7 5 3 2 Diode Forward Voltage, VSD -- V SW Time -- ID 1000 7 5 0.1 7 5 3 2 0.001 0.2 5 7 10 IT08408 Drain Current, ID -- A 1.0 7 5 3 2 5°C 25° C 3 VGS=0 Ta= 7 5 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S 7 IF -- VSD 10 7 5 3 2 VDS=10V --25 °C yfs -- ID 10 n Operation in this area is limited by RDS(on). Ta=25°C Single pulse Mounted on a ceramic board (900mm2✕0.8mm) 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Drain-to-Source Voltage, VDS -- V 2 3 5 IT08413 1.0 M ou nt 0.8 ed on ac er 0.6 am ic bo ar 0.4 d( 90 0m m2 ✕ 0.8 m 0.2 m ) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT08414 No.8128-3/4 CPH3438 Note on usage : Since the CPH3438 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2004. Specifications and information herein are subject to change without notice. PS No.8128-4/4